Search Results (7,291)

Adhesive fracture in layered structures is governed by subsurface crack evolution that cannot be accessed using surface-based diagnostics. Methods such as digital image correlation and optical spectroscopy measure surface deformation but implicitly assume a straight and uniform crack front, an assumption that becomes invalid for interfacial fracture with wide crack openings and asymmetric propagation. In this work, terahertz time-domain spectroscopy (THz-TDS) is combined with double-cantilever beam testing to directly map subsurface crack-front geometry in opaque adhesive joints. A strontium titanate-doped epoxy is used to enhance dielectric contrast. Multilayer refractive index extraction, pulse deconvolution, and diffusion-based image enhancement are employed to separate overlapping terahertz echoes and reconstruct two-dimensional delay maps of interfacial separation. The measured crack geometry is coupled with load–displacement data and augmented beam theory to compute spatially averaged stresses and energy release rates. The measurements resolve crack openings down to approximately 100 μm and reveal pronounced width-wise non-uniform crack advance and crack-front curvature during stable growth. These observations demonstrate that surface-based crack-length measurements can either underpredict or overpredict fracture toughness depending on the measurement location. Fracture toughness values derived from width-averaged subsurface crack fronts agree with J-integral estimates obtained from surface digital image correlation. Signal-to-noise limitations near the crack tip define the primary resolution limit. The results establish THz-TDS as a quantitative tool for subsurface fracture mechanics and provide a framework for physically representative toughness measurements in layered and bonded structures. Full article

Transparent polymeric materials such as poly(methyl methacrylate) (PMMA), polycarbonate (PC), and polyethylene terephthalate (PET) are widely used as glass alternatives in algal bioreactors, where optical clarity and mechanical stability are crucial. However, their long-term use is limited by surface degradation processes. Photodegradation, hydrolysis, and biofilm accumulation can reduce light transmission in the 400–700 nm range essential for photosynthesis. This study examined the aging of PMMA, PC, and PET under bioreactor conditions. Samples were exposed for 70 days to illumination, culture medium, and aquatic environments. Changes in their optical transmittance, surface roughness, and wettability were analyzed. All polymers exhibited measurable surface degradation, characterized by an average 15% loss in transparency, significant increases in surface roughness, and reduced contact angles. PMMA demonstrated the highest optical stability, maintaining strong transmission in key blue and red spectral regions, while PET performed the worst, showing low initial clarity and the steepest decline. The most severe surface degradation occurred in areas exposed to the receding liquid interface, highlighting the need for targeted cleaning and/or a reduction in the size of the liquid–vapor transition zone. Overall, the results identify PMMA and recycled PMMA (PMMA_R) as durable, cost-effective materials for transparent bioreactor walls. Full article

Rapid and reliable building damage assessment (BDA) is crucial for post-disaster emergency response. However, existing methods face challenges such as complex background interference, the difficulty in jointly modeling local geometric details and global spatial dependencies, and adverse weather conditions. To address these issues, this paper proposes the Adaptive Difference State-Space Fusion Network (ADSFNet), capable of processing both optical and Synthetic Aperture Radar (SAR) data to alleviate weather-induced limitations. To achieve this, ADSFNet innovatively introduces the Adaptive Difference Attention Fusion (ADAF) module and the Hybrid Selective State-Space Convolution (HSSC) module. Specifically, ADAF integrates pre- and post-disaster features to guide the network to focus on building regions while suppressing background interference. Meanwhile, HSSC synergizes the local texture extraction of CNNs with the global modeling strength of Mamba, enabling the simultaneous capture of cross-building spatial relationships and fine-grained damage details. Experimental results on sub-meter high-resolution MultiModal (BRIGHT) and optical (xBD) datasets demonstrate that ADSFNet attains F1 scores of 71.36% and 73.98%, which are 1.29% and 0.6% higher than the state-of-the-art mainstream methods, respectively. Finally, we leverage the model outputs to construct a disaster-centric knowledge graph and integrate it with Large Language Models to develop an intelligent management system, providing a novel technical pathway for emergency decision-making. Full article

Silica nanoparticles (SNPs) are pivotal in designing functional optical films, but accurately modeling their properties is hindered by the limitations of classical effective medium theories, which break down for larger particles and complex morphologies. We introduce a robust, effective medium theory that overcomes these limitations by incorporating full Mie scattering solutions, thereby accounting for size-dependent and multipolar effects. Our model is comprehensively developed for unshelled, shelled, mixed, and hollow SNPs randomly dispersed in a host medium. Its accuracy is rigorously benchmarked against 3D finite-element method simulations. This work establishes a practical and reliable framework for predicting the optical response of SNP composites, significantly facilitating the rational design of high-performance coatings, such as anti-glare layers, with minimal computational cost. Full article

The use of virtual reality (VR) has made significant advancements, and now it is widely used across a range of applications. However, consumers’ capacity to fully enjoy VR experiences continues to be limited by a chronic problem known as cybersickness (CS). This study explores the feasibility of mitigating CS through geometric scene simplification combined with electroencephalography (EEG)-based monitoring. According to the sensory conflict theory, this issue is caused by the discrepancy between the visually induced self-motion (VIMS) through immersive displays and the real motion the vestibular system detects. While prior mitigation strategies have largely relied on hardware modifications or visual field restrictions, this paper introduces a novel framework that integrates geometric scene simplification with EEG-based neurophysiological activity to reduce VIMS during VR immersion. The proposed framework combines EEG neurophysiology, allowing us to monitor users’ brainwave activity and cognitive states during virtual immersion experience. The empirical evidence from our investigation shows a correlation between CS manifestation and neural activation in the parietal and temporal lobes. As an experiment with 15 subjects, statistical differences were significantly different with $P= 0.001$ and large effect size $\eta 2=0.28$, while preliminary trends suggest lower neural activation during simplified scenes. Notably, a decrease in neural activation corresponding to reduced optic flow (OF) suggests that VR environment simplification may help attenuate CS symptoms, providing preliminary support for the proposed strategy. Full article

This pilot study assessed the effectiveness of the intravitreal dexamethasone implant (Ozurdex) in retinal vein occlusion (RVO) patients and explored potential pre-treatment biomarkers to improve management and prognosis. Eighteen patients with branch RVO (BRVO) and twenty-four with central RVO (CRVO) receiving two intravitreal injections of Ozurdex (at baseline and between 4 and 6 months) were included. Best-corrected visual acuity (BCVA) and central retinal thickness (CRT) were recorded at baseline and after 3, 6, and 12 months. Retinal morphology was assessed using optical coherence tomography (OCT), and serum biomarkers were analyzed by ELISAs. No significant BCVA improvement was observed in RVO patients, while CRT significantly decreased from 3 to 12 months. Patients without defects of the retinal inner layers, ellipsoid zone, and external limiting membrane showed significantly higher BCVA at 6 and 12 months. Both BRVO and CRVO groups demonstrated significant BCVA improvement and CRT reduction at 6 and 12 months, with better outcomes in BRVO patients. These patients exhibited lower baseline serum levels of xanthine oxidase (XO) and thrombospondin-1 (TSP-1), which inversely correlated with BCVA at 12 months. Ozurdex was effective in real-life RVO treatment, particularly in BRVO. Serum XO and TSP-1 may serve as prognostic biomarkers for RVO. Full article

High accuracy and time synchronous aerosol optical depth (AOD) is essential for atmospheric correction (AC) of medium and high spatial resolution (MHSR) remote sensing data. However, existing high-resolution AOD retrieval methods often rely on sparsely distributed ground-based measurements, which limits their capacity to resolve fine-scale spatial heterogeneity and consequently constrains retrieval performance. To address this limitation, we propose a framework that takes GF-1 top-of-atmosphere (TOA) reflectance as input, where the model is first pre-trained using MCD19A2 as Pseudo-labels, with high-confidence samples weighted according to their spatial consistency and temporal stability, and then fine-tuned using Aerosol Robotic Network (AERONET) observations. This approach enables improved retrieval accuracy while better capturing surface variability. Validation across multiple regions demonstrates strong agreement with AOD measurements, achieving the correlation coefficient (R) of 0.941 and RMSE of 0.113. Compared to models without pretraining, the proportion of AOD retrievals within EE improves by 13%. While applied to AC, the corrected surface reflectance also shows strong consistency with in situ observations (R > 0.93, RMSE < 0.04). The proposed Trans-AODnet significantly enhances the accuracy and reliability of AOD inputs for AC of high-resolution wide-field sensors (e.g., GF-WFV), offering robust support for regional environmental monitoring and exhibiting strong potential for broader remote sensing applications. Full article

Despite a growing number of Earth Observation satellites, a critical observational gap persists for timely, high-resolution flood mapping, primarily due to infrequent satellite revisits and persistent cloud cover. To address this issue, we propose a novel framework that synergistically fuses complementary data from three public sensor types. Our methodology harmonizes these disparate data sources by using surface water fraction as a common variable and downscaling them with flood susceptibility and topography information. This allows for the integration of sub-daily observations from the Visible Infrared Imaging Radiometer Suite and the Advanced Himawari Imager with the cloud-penetrating capabilities of the Advanced Microwave Scanning Radiometer 2. We evaluated this approach on the February 2022 flood in Brisbane, Australia using an independent ground truth dataset. The framework successfully compensates for the limitations of individual sensors, enabling the consistent generation of detailed, high-resolution flood maps. The proposed method outperformed the flood extent derived from commercial high-resolution optical imagery, scoring 77% higher than the Copernicus Emergency Management Service (CEMS) map in the Critical Success Index. Furthermore, the True Positive Rate was twice as high as the CEMS map, confirming that the proposed method successfully overcame the cloud cover issue. This approach provides valuable, actionable insights into inundation dynamics, particularly when other public data sources are unavailable. Full article

Plasmonics and metasurfaces (MSs) have emerged as two of the most influential platforms for manipulating light at the nanoscale, each offering complementary strengths that challenge the limits of conventional optical design. Plasmonics enables extreme subwavelength field confinement, ultrafast light–matter interaction, and strong optical nonlinearities, while MSs provide versatile and compact control over phase, amplitude, polarization, and dispersion through planar, nanostructured interfaces. Recent advances in materials, nanofabrication, and device engineering are increasingly enabling these technologies to be combined within unified planar and hybrid optical platforms. This review surveys the physical principles, material strategies, and device architectures that underpin plasmonic, MS, and hybrid plasmonic–dielectric systems, with an emphasis on interface-mediated optical functionality rather than long-range guided-wave propagation. Key developments in modulators, detectors, nanolasers, metalenses, beam steering devices, and programmable optical surfaces are discussed, highlighting how hybrid designs can leverage strong field localization alongside low-loss wavefront control. System-level challenges including optical loss, thermal management, dispersion engineering, and large-area fabrication are critically examined. Looking forward, plasmonic and MS technologies are poised to define a new generation of flat, multifunctional, and programmable optical systems. Applications spanning imaging, sensing, communications, augmented and virtual reality, and optical information processing illustrate the transformative potential of these platforms. By consolidating recent progress and outlining future directions, this review provides a coherent perspective on how plasmonics and MSs are reshaping the design space of next-generation planar optical hardware. Full article

As semiconductor process nodes shrink to 3 nm and beyond, traditional optical proximity correction (OPC) and resolution enhancement technologies (RETs) can no longer meet the high patterning precision needs of advanced chip manufacturing due to the sub-wavelength lithography limits. Inverse lithography technology (ILT), a key part of computational lithography, has become a critical solution for these issues. From an EDA industry perspective, this review provides an original and systematic summary of ILT’s development and applications, which helps integrate the scattered research into a clear framework for both academic and industrial use. Compared with traditional OPC, the latest ILT has three main advantages: (1) better patterning accuracy, as a result of the precise optical models that fix complex optical issues (like diffraction and interference) in advanced lithography systems; (2) a wider process window, as it optimizes mask designs by working backwards from the target wafer patterns, making lithography more stable against process changes; and (3) stronger adaptability to new lithography scenarios, such as High-NA EUV and extended DUV nodes. This review first explains ILT’s working principles (the basic concepts, mathematical formulae, and main methods like level-set and pixelated approaches) and its development history, highlighting key events that boosted its progress. It then analyzes ILT’s current application status in the industry (such as hotspot fixing, full-chip trials, and EUV-era use) and its main bottlenecks: a high computational complexity leading to long runtime, difficulties in mask manufacturing, challenges in model calibration, and a conservative market that slows large-scale adoption. Finally, it discusses promising future directions, including hybrid ILT-OPC-SMO strategies, improving model accuracy, AI/ML-driven design, GPU acceleration, multi-beam mask writer improvements, and open-source data to solve data shortage problems. By combining the latest research and industry practices, this review fills the gap of comprehensive ILT summaries that cover the principles, progress, applications, and prospects. It helps readers fully understand ILT’s technical landscape and offers practical insights for solving the key challenges, thus promoting ILT’s industrial use in advanced chip manufacturing. Full article

The surface tension of a liquid droplet can be determined by fitting its actual profiles using the Young–Laplace equation, effectively reducing the measurement of surface tension to an accurate determination of the droplet’s profiles. Spectral confocal sensors are high-precision, interference-resistant, non-contact measurement systems for droplet surface profiling, employing a light source together with a dispersive objective lens and a spectrometer to acquire depth-dependent spectral information. The accuracy and stability of surface tension measurements can be effectively enhanced by spectral confocal sensors measuring the droplet surface profile. Although existing spectral confocal sensors have significantly improved measurement range and accuracy, their angular measurement performance remains limited, and deviations may arise at droplet edges with large inclinations or pronounced surface profile variations. This study presents the optical design of a large-angle spectral confocal sensor. By theoretically analyzing the conditions for generating linear axial dispersion in the dispersive objective lens, a front-end dispersive objective lens was designed by combining positive and negative lenses. Based on a Czerny–Turner (C-T) configuration, the back-end spectrometer was designed under the astigmatism-free condition, taking into account both central and edge wavelength effects. Zemax was employed for simulation optimization and tolerance analysis of each optical module. The results show that the designed system achieves an axial dispersion of 1.5 mm over the 430–700 nm wavelength range, with a maximum allowable object angle of ±40° and a theoretical resolution of 3 μm. The proposed spectral confocal sensor maintains high measurement accuracy over a wide angular range, facilitating precise measurement of droplet surface tension at large inclination angles. Full article

Heavy metals are major toxic anthropogenic contaminants released into the environment mainly through wastewater discharges. Adsorption is one of the most effective and widely applied methods for their removal from aqueous systems. However, although activated carbon is commonly used, its high cost and limited regenerability motivate the search for cheaper and more environmentally friendly alternatives. In this study, selected natural and waste-derived materials were evaluated for Cu²⁺ removal from both model solutions and atypical textile wastewater. Coffee grounds, chestnut seeds, acorns, potato peels, eggshells, marine shells, and poultry bones were tested and compared with commercial activated carbon. Their structural and functional properties were characterised using specific surface area measurements, optical microscopy, SEM-EDS, and FTIR analyses. Two adsorption isotherm models (Langmuir and Freundlich) were used to analyse the experimental data for the selected adsorbents, and model parameters were determined by linear regression. Based on model solution tests, two materials showed the highest Cu²⁺ sorption potential: coarse poultry bones (97.0% at 24 h) and fine cockle shells (96.2% at 24 h). When applied to real textile wastewater, the bone-derived material achieved the highest Cu²⁺ removal efficiency (79.4%). Although this efficiency is lower than typical values obtained in laboratory solutions, it demonstrates the feasibility of waste-derived materials as low-cost adsorbents and suggests that further optimisation could further improve their performance. Full article

This paper examines the contrasting yet complementary approaches of the Constrained Disorder Principle (CDP) and Stefan Hell’s deterministic optical nanoscopy for managing noise in complex systems. The CDP suggests that controlled disorder within dynamic boundaries is crucial for optimal system function, particularly in biological contexts, where variability acts as an adaptive mechanism rather than being merely a measurement error. In contrast, Hell’s recent breakthrough in nanoscopy demonstrates that engineered diffraction minima can achieve sub-nanometer resolution without relying on stochastic (random) molecular switching, thereby replacing randomness with deterministic measurement precision. Philosophically, these two approaches are distinct: the CDP views noise as functionally necessary, while Hell’s method seeks to overcome noise limitations. However, both frameworks address complementary aspects of information extraction. The primary goal of microscopy is to provide information about structures, thereby facilitating a better understanding of their functionality. Noise is inherent to biological structures and functions and is part of the information in complex systems. This manuscript achieves integration through three specific contributions: (1) a mathematical framework combining CDP variability bounds with Hell’s precision measurements, validated through Monte Carlo simulations showing 15–30% precision improvements; (2) computational demonstrations with N = 10,000 trials quantifying performance under varying biological noise regimes; and (3) practical protocols for experimental implementation, including calibration procedures and real-time parameter optimization. The CDP provides a theoretical understanding of variability patterns at the system level, while Hell’s technique offers precision tools at the molecular level for validation. Integrating these approaches enables multi-scale analysis, allowing for deterministic measurements to accurately quantify the functional variability that the CDP theory predicts is vital for system health. This synthesis opens up new possibilities for adaptive imaging systems that maintain biologically meaningful noise while achieving unprecedented measurement precision. Specific applications include cancer diagnostics through chromosomal organization variability, neurodegenerative disease monitoring via protein aggregation disorder patterns, and drug screening by assessing cellular response heterogeneity. The framework comprises machine learning integration pathways for automated recognition of variability patterns and adaptive acquisition strategies. Full article

Secchi disk depth (SDD) is a widely critical indicator of water transparency. However, existing retrieval models often suffer from limited transferability and biased predictions when applied to optically diverse waters. Here, we compiled a dataset of 6218 paired in situ SDD and remote sensing reflectance (R_rs) measurements to evaluate model generalization. We benchmarked nine machine learning (ML) models (RF, KNN, SVM, XGB, LGBM, CAT, RealMLP, BNN-MCD, and MDN) under three validation scenarios with progressively decreasing training-test overlap: Random, Waterbody, and Cross-Optical Water Type (Cross-OWT). Furthermore, SHAP analysis was employed to interpret feature contributions and relate model behaviors to optical properties. Results revealed a distinct scenario-dependent generalization gradient. Random splits yielded minimal bias. In contrast, Waterbody transfer consistently shifted predictions toward underestimation (SSPB: −16.9% to −3.8%). Notably, Cross-OWT extrapolation caused significant error inflation and a bias reversal toward overestimation (SSPB: 10.7% to 88.6%). Among all models, the Mixture Density Network (MDN) demonstrated superior robustness with the lowest overestimation (SSPB = 10.7%) under the Cross-OWT scenario. SHAP interpretation indicated that engineered indices, particularly NSMI, functioned as regime separators, with substantial shifts in feature attribution occurring at NSMI values between 0.4 and 0.6. Accordingly, feature sensitivity analysis showed that removing band ratios and indices improved Cross-OWT robustness for several classical ML models. For instance, KNN exhibited a significant reduction in Median Symmetric Accuracy (MdSA) from 96% to 40% after feature reduction. These findings highlight that model applicability must be evaluated under scenario-specific conditions, and feature engineering strategies require rigorous testing against optical regime shifts to ensure generalization. Full article

Information on crop planting structure serves as a key reference for crop growth monitoring and agricultural structural adjustment. Mapping the spatial distribution of crops through feature-based classification serves as a fundamental component of sustainable agricultural development. However, current crop classification methods often face challenges such as the discontinuity of optical data due to cloud cover and the limited discriminative capability of traditional SAR backscatter intensity for spectrally similar crops. In this case study, we assess multi-temporal Sentinel-1 and Sentinel-2 Satellite images for crop classification in a paddy rice growing region in Helonghu Town, located in the central region of Xiangyin County, Yueyang City, Hunan Province, China (28.5° N–29.0° N, 112.8° E–113.2° E). We systematically investigate three key aspects: (1) the classification performance using optical time-series Sentinel-2 imagery; (2) the time-series classification performance utilizing polarimetric SAR decomposition features from Sentinel-1 dual-polarimetric SAR images; and (3) the classification performance based on a combination of Sentinel-1 and Sentinel-2 images. Optimal classification results, with the highest overall accuracy and Kappa coefficient, are achieved through the combination of Sentinel-1 (SAR) and Sentinel-2 (optical) data. This case study evaluates the time-series classification performance of Sentinel-1 and Sentinel-2 data to determine the optimal approach for crop classification in Helonghu Town. Full article