Search Results (102)

This study synthesizes and comparatively investigates two squaric acid-based phthalocyanine-like dyes, SNF and its long-chain alkylated derivative LNF, to systematically elucidate the influence of peripheral hydrophobic groups on their third-order nonlinear optical (NLO) properties. The NLO characteristics were comprehensively characterized using femtosecond Z-scan and I-scan techniques at both 800 nm and 900 nm. Both dyes exhibited strong saturable absorption (SA), confirming their potential as saturable absorbers. Critically, the comparative analysis revealed that SNF exhibits a significantly greater nonlinear absorption coefficient (β) compared to LNF under identical conditions. For instance, at 800 nm, the β of SNF was approximately 3–5 times larger than that of LNF. This result conclusively demonstrates that the introduction of long hydrophobic alkyl chains attenuates the NLO response. Furthermore, I-scan measurements revealed excellent SA performance, with high modulation depths (e.g., LNF: 43.0% at 900 nm) and low saturation intensities. This work not only clarifies the structure–property relationship in these D-A-D dyes but also presents a clear strategy for modulating the NLO properties of organic chromophores for applications in near-infrared pulsed lasers. Full article

This fundamental understanding of molecular structure–NLO property relationships provides critical design principles for next-generation optical limiting materials, quantum photonic devices, and ultrafast nonlinear optical switches, addressing the growing demand for high-performance organic optoelectronic materials in laser protection and photonic computing applications. In this study, it was observed that selenophene-incorporated fused D-A-D architectures exhibit a remarkable enhancement in two-photon absorption characteristics. By strategically modifying the heteroatomic composition of the Y6-derived fused-ring core, replacing thiophene (BDS) with selenophene (BDSe), the optimized system achieves unprecedented NLO performance. BDSe displays a nonlinear absorption coefficient (β) of 3.32 × 10⁻¹⁰ m/W and an effective two-photon absorption cross-section (σ_TPA) of 2428.2 GM under 532 nm with ns pulse excitation. Comprehensive characterization combining Z-scan measurements, transient absorption spectroscopy, and DFT calculations reveals that the heavy atom effect of selenium induces enhanced spin–orbit coupling, optimized intramolecular charge transfer dynamics and stabilized excited states, collectively contributing to the superior reverse saturable absorption behavior. It is believed that this molecular engineering strategy establishes critical structure–property relationships for the rational design of organic NLO materials. Full article

Light has been intensively investigated as a computing medium due to its high-speed propagation and large operation bandwidth. Since the invention of the first laser in 1960, the development of optical computing technologies has presented both challenges and opportunities. Recent advances in artificial intelligence over the past decade have opened up new horizons for optical computing applications. This study presents an end-to-end truth table direct mapping approach using on-chip deep diffractive neural network (D²NN) technology to achieve highly parallel optical logic operations. To enable precise logical operations, we propose an on-chip nonlinear solution leveraging the similarity between the hyperbolic tangent (tanh) function and reverse saturable absorption characteristics of quantum dots. We design and demonstrate a 4-bit on-chip D²NN full adder circuit. The simulation results show that the proposed architecture achieves 100% accuracy for 4-bit full adders across the entire dataset. Full article

Femtosecond fiber lasers are widely utilized across various fields and also serve as an ideal platform for studying soliton dynamics. Bound-state solitons, as a significant soliton dynamic phenomenon, attract widespread attention and research interest because of their potential applications in high-speed optical communication, all-optical information storage, quantum computing, optical switching, and high-resolution spectroscopy. We investigate the effects of pump power variations on the formation of mode-locked solitons and bound-state solitons in a femtosecond fiber laser with a Cr₂S₃ saturable absorber (SA) through numerical simulations while observing the transition, formation, and break-up process of bound soliton pulses. By optimizing the cavity structure and adjusting the net dispersion, the mode-locked soliton is obtained based on this SA. This is the narrowest solitons produced by this SA to date, exhibiting the smallest time-bandwidth product. Moreover, stable double-bound solitons and unique (2 + 1) triple-bound solitons are successfully obtained. The diverse bound-state solitons not only demonstrate the excellent nonlinear absorption properties of Cr₂S₃ as a saturable absorber but also expand the scope of applications for Cr₂S₃ saturable absorbers in fiber lasers. Full article

The exploitation of high-performance third-order nonlinear optical (NLO) materials that have a favorable optical limit (OL) threshold is essential due to a rise in the application of ultra-intense lasers. In this study, a Cu-based MOF (denoted as Cu-bpy) was synthesized, and its third-order NLO and OL properties were investigated using the Z-scan technique with the nanosecond laser pulse excitation set at 532 nm. The Cu-bpy exhibits a typical rate of reverse saturable absorption (RSA) with a third-order nonlinear absorption coefficient of 100 cm GW⁻¹ and a favorable OL threshold of 0.75 J cm⁻² (at a concentration of 1.6 mg mL⁻¹), which is lower than that of most NLO materials that have been reported on so far. In addition, a DFT calculation was performed and was in agreement with our experimental results. Furthermore, the mechanism of the third-order NLO properties was illustrated as one-photon absorption (1PA). These results investigate the relationship between the structure and the nonlinear optical properties of Cu-bpy, and provide an experimental and theoretical basis for its use in optical limiting applications. Full article

Background/Objectives: Microneedle(MN)-based drug delivery is one of the potential approaches to overcome the limitations of oral and hypodermic needle delivery. An in silico model has been developed for hollow microneedle (HMN)-based drug delivery in the skin and its subsequent absorption in the blood and tissue compartments in the presence of interstitial flow. The drug’s reversible specific saturable binding to its receptors and the kinetics of reversible absorption across the blood and tissue compartments have been taken into account. Methods: The governing equations representing the flow of interstitial fluid, the transport of verapamil in the viable skin and the concentrations in the blood and tissue compartments are solved using combined Marker and Cell and Immersed Boundary Methods to gain a quantitative understanding of the model under consideration. Results: The viscoelastic skin is predicted to impede the transport of verapamil in the viable skin and, hence, reduce the concentrations of all forms in the blood and the tissue compartments. The findings reveal that a higher mean concentration in the viable skin is not always associated with a longer MN length. Simulations also predict that the concentrations of verapamil in the blood and bound verapamil in the tissue compartment rise with decreasing tip diameters. In contrast, the concentration of free verapamil in the tissue increases with increasing injection velocities. Conclusions: The novelty of this study includes verapamil metabolism in two-dimensional viscoelastic irregular viable skin and the nonlinear, specific, saturable, and reversible binding of verapamil in the tissue compartment. The tip diameter and the drug’s injection velocity are thought to serve as regulatory parameters for the effectiveness and efficacy of MN-mediated therapy if the MN is robust enough to sustain the force needed to penetrate a wider tip into the skin. Full article

As an emerging two-dimensional (2D) Group-VA material, bismuth selenide (Bi₂Se₃) exhibits favorable electrical and optical properties. Here, three distinct morphologies of Bi₂Se₃ were obtained from bulk Bi₂Se₃ through electrochemical intercalation exfoliation. And the morphologies of these nanostructures can be tuned by adjusting solvent polarity during exfoliation. Then, the nonlinear optical and absorption characteristics of the Bi₂Se₃ samples with different morphologies were investigated using open-aperture Z-scan technology. The results reveal that the particle structure of Bi₂Se₃ exhibits stronger reverse saturable absorption (RSA) than the sheet-like structure. This is attributed to the higher degree of oxidation and greater number of localized defect states in the particle structure than in the sheet-like structure. Electrons in these defect states can be excited to higher energy levels, thereby triggering excited-state and two-photon absorption, which strengthen RSA. Finally, with increasing the RSA, the optical limiting threshold of 2D Bi₂Se₃ can also be increased. This work expands the potential applications of 2D Bi₂Se₃ materials in the field of broadband nonlinear photonics. Full article

In recent years, the fabrication of materials with large nonlinear optical coefficients and the investigation of methods to enhance nonlinear optical performance have been in the spotlight. Herein, the bismuth telluride (Bi₂Te₃) thin films were prepared by radio-frequency magnetron sputtering and annealed in vacuum at various temperatures. The structural and optical properties were characterized and analyzed using X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, spectroscopic ellipsometry, and UV/VIS/NIR spectrophotometry. The third-order optical nonlinearities of Bi₂Te₃ thin films were investigated using the Z-scan technique, employing a 100 fs pulse width at an 800 nm wavelength. It is found that the crystallinity and the average grain size of the films increase with the annealing temperature. Meanwhile, the extinction coefficient of the annealed films increased, accompanied by a redshift in the optical bandgap. All samples exhibit pronounced saturable absorption and self-focusing behaviors. The nonlinear absorption coefficient and nonlinear refractive index of Bi₂Te₃ films annealed at 300 °C were found to be 2.44 times and 1.85 times higher than those of the as-deposited films, respectively. These findings demonstrate that annealing treatment is an effective approach to tuning the crystalline structure and linear optical properties of Bi₂Te₃ films while simultaneously enhancing their nonlinear optical performance. Full article

Graphene oxide (GO) and reduced graphene oxide (rGO) have emerged as robust materials in the development of SAs for erbium-doped fiber lasers (EDFLs). Their exceptional optical properties, such as broadband absorption and fast recovery times, make them ideal candidates for achieving ultrashort pulse operation in EDFLs. With its higher oxygen content, GO offers greater nonlinearity and a tunable absorption spectrum, while rGO, yielded through chemical reduction, exhibits enhanced electrical conductivity and higher saturable absorption. These properties facilitate the generation of ultrashort pulses in EDFLs, which are highly desired for various medical imaging, telecommunications, and material processing applications. This review paper comprehensively analyzes the advancements in GO and rGO SAs in the context of EDFLs for mode-locking and Q-switching applications. The performance of EDFLs utilizing GO and rGO SAs is critically evaluated, focusing on key parameters, such as modulation depth, pulse duration, repetition rate, average power, pulse energy, peak power, and signal-to-noise ratio. Additionally, this review delves into the various synthesis methods of GO and rGO thin film, highlighting their impact on the optical properties and performance of SAs. The discussion on techniques to integrate the SAs into laser cavities includes direct deposition of nanoparticles/thin-film-based SAs, tapered-fiber-based SAs, and D-shaped SAs. Furthermore, the paper explores the challenges encountered during the fabrication of ideal GO and rGO SAs, with issues related to uniformity, stability, and tunability, along with proposed solutions to address these challenges. The insights provided offer valuable guidance for future research aimed at enhancing the performance of EDFLs using GO/rGO SAs. Full article

Palladium (Pd) nanocubes, a type of metallic nanostructure, have demonstrated remarkable optoelectronic properties, garnering significant attention. However, their nonlinear optical characteristics and related device applications remain underexplored. In this study, we report the fabrication of a novel saturable absorber (SA) by depositing Pd nanocubes onto a D-shaped fiber (DF). The Pd nanocubes, with an average size of 12 nm, were synthesized and integrated with a DF, resulting in a highly robust SA with broadband saturable absorption characteristics. When incorporated into Er³⁺-doped laser cavities, the Pd-DF SA enabled the generation of ultrafast pulses with a central wavelength of 1560 nm, a corresponding repetition rate of 26.7 MHz, and a temporal width of 1.85 ps. Our findings highlight the strong potential of the Pd-DF device as a versatile SA for constructing high-energy ultrafast fiber lasers. Full article

Owing to their remarkable characteristics, two-dimensional (2D) layered, MAX phase materials have garnered significant attention in the field of optoelectronics in recent years. Herein, a novel MAX phase ceramic material (Mo₂TiAlC₂) was prepared into a saturable absorber (SA) by the spin-coating method for passively Q-switching (PQS), and its nonlinear optical absorption properties were characterized with a Tm:YAlO₃ (Tm:YAP) nanosecond laser. The structure characteristics and composition analysis revealed that the Mo₂TiAlC₂ material exhibits a well-defined and stable structure, with a uniform thin film successfully obtained through spin coating. In this study of a PQS laser by employing a Mo₂TiAlC₂-based SA, an average output power of 292 mW was achieved when the absorbed pump power was approximately 4.59 W, corresponding to a central output wavelength of 1931.2 nm. Meanwhile, a stable pulse with a duration down to 242.9 ns was observed at a repetition frequency of 47.07 kHz, which is the narrowest pulse width recorded among PQS solid-state lasers using MAX phase materials as SAs. Our findings indicate that the Mo₂TiAlC₂ MAX phase ceramic material is an excellent modulator and has promising potential for ultrafast nonlinear photonic applications. Full article

In this work, the nonlinear optical (NLO) properties of CuO nanoparticles (CuO NPs) were studied experimentally using the pulsed laser ablation (PLA) technique. A nanosecond Nd: YAG laser was employed as the ablation excitation source to create CuO NPs in distilled water. Various CuO NPs samples were prepared at ablation periods of 20, 30, and 40 min. Utilizing HR-TEM, the structure of the synthesized CuO NPs samples was verified. In addition, a UV–VIS spectrophotometer was used to investigate the linear features of the samples. The Z-scan technique was utilized to explore the NLO properties of CuO NPs samples, including the nonlinear absorption coefficient ($\beta$) and nonlinear refractive index ($n_2$). An experimental study on the NLO features was conducted at a variety of excitation wavelengths (750–850 nm), average excitation powers (0.8–1.2 W), and CuO NPs sample concentrations and sizes. The reverse saturable absorption (RSA) behavior of all CuO NPs samples differed with the excitation wavelength and average excitation power. In addition, the CuO NPs samples demonstrated excellent optical limiters at various excitation wavelengths, with limitations dependent on the size and concentration of CuO NPs. Full article

Metallic nanoparticles have gained attention in technological fields, particularly photonics. The creation of silver/gold (Ag/Au) alloy NPs upon laser exposure of an assembly of these NPs was described. First, using the Nd: YAG pulsed laser ablation’s second harmonic at the same average power and exposure time, Ag and Au NPs in distilled water were created individually. Next, the assembly of Ag and Au NP colloids was exposed again to the pulsed laser, and the effects were examined at different average powers and exposure times. Furthermore, Ag/Au alloy nanoparticles were synthesized with by raising the average power and exposure time. The absorption spectrum, average size, and shape of alloy NPs were obtained by using an ultraviolet-visible (UV–Vis) spectrophotometer and transmission electron microscope instrument. Ag/Au alloy NPs have been obtained in the limit of quantum dots (<10 nm). The optical band gap energies of the Ag/Au alloy colloidal solutions were assessed for different Ag/Au alloy NP concentrations and NP sizes as a function of the exposure time and average power. The experimental data showed a trend toward an increasing bandgap with decreasing nanoparticle size. The nonlinear optical characteristics of Ag/Au NPs were evaluated and measured by the Z-scan technique using high repetition rate (80 MHz), femtosecond (100 fs), and near-infrared (NIR) (750–850 nm) laser pulses. In open aperture (OA) Z-scan measurements, Ag, Au, and Ag/AuNPs present reverse saturation absorption (RSA) behavior, indicating a positive nonlinear absorption (NLA) coefficient. In the close-aperture (CA) measurements, the nonlinear refractive (NLR) indices (n₂) of the Ag, Au, and Ag/Au NP samples were ascribed to the self-defocusing effect, indicating an effective negative nonlinearity for the nanoparticles. The NLA and NLR characteristics of the Ag/Au NPs colloids were found to be influenced by the incident power and excitation wavelength. The optical limiting (OL) effects of the Ag/Au alloy solution at various excitation wavelengths were studied. The OL effect of alloy NPs is greater than that of monometallic NPs. The Ag/Au bimetallic nanoparticles were found to be more suitable for optical-limiting applications. Full article

Two-dimensional (2D) violet phosphorus (VP) plays a significant role in the applications of photonic and optoelectronic devices due to its unique optical and electrical properties. The ultrafast carrier dynamics and nonlinear optical absorption properties were systematically investigated here. The intra- and inter-band ultrafast relaxation times of 2D VP nanosheets were measured to be ~6.83 ps and ~62.91 ps using the pump–probe method with a probe laser operating at 1.03 μm. The nonlinear absorption coefficient βeff, the saturation intensity Is, the modulation depth ΔR, and the nonsaturable loss were determined to be −2.18 × 10⁴ cm/MW, 329 kW/cm², 6.3%, and 9.8%, respectively, by using the Z-scan and I-scan methods, indicating the tremendous saturable absorption property of 2D VP nanosheets. Furthermore, the passively Q-switched Nd:YVO₄ laser was realized with the 2D VP nanosheet-based SA, in which the average output power of 700 mW and the pulse duration of 478 ns were obtained. These results effectively reveal the nonlinear optical absorption characteristics of VP nanosheets, demonstrating their outstanding light-manipulating capabilities and providing a basis for the applications of ultrafast optical devices. Our results verify the excellent saturable absorption properties of 2D VP, paving the way for its applications in pulsed laser generation. Full article

Although laser technology brings convenience to production and daily life, it also causes high-energy damage. Therefore, there is an urgent need to develop optical limiting materials for laser protection. In this study, a novel nonlinear optical material, red/black phosphorus lateral heterojunction, is successfully prepared through solvothermal and ultrasonic treatment. Using the Z−scan method, the nonlinear optical properties of the red/black phosphorus heterojunction are determined at wavelengths of 532 and 1064 nm. These results indicate that the red/black phosphorus heterojunction exhibits reverse saturable absorption properties in 1.2.3-glycerol. Interestingly, the red/black phosphorus heterojunction shows an enhanced performance over red phosphorus by introducing the black phosphorus phase. Moreover, the red/black phosphorus heterojunction is doped into organically modified silicate gel glass with excellent broadband optical limiting performance. This study highlights the promising prospect of the red/black phosphorus heterojunction in the nonlinear optical and optical limiting fields. Full article