Search Results (76)

In this paper, a simple hydrothermal approach is employed to prepare nitrogen-doped graphene quantum dots (N-GQDs) with controllable size and structural features, where citric acid and ethylenediamine served as the carbon and nitrogen precursors, respectively. The influence of hydrothermal temperature and duration on the structural features, surface chemistry, and electrochemical behavior of N-GQDs is systematically investigated. The capacitive behavior of N-GQD electrodes exhibits typical pseudocapacitive characteristics, primarily attributed to the surface functional groups. The NG-2 electrode (180 °C, 6 h) demonstrates a specific capacitance of 309.8 F g⁻¹ at 1 A g⁻¹ and maintains 98.1% of its initial capacitance after 8000 cycles, confirming excellent stability. Density functional theory (DFT) results demonstrate that the co-presence of graphitic and pyrrolic nitrogen induces a synergistic modulation of the electronic structure, resulting in improved charge-transfer kinetics and surface reactivity of N-GQDs compared to single-type nitrogen doping. Additionally, NG-2//activated carbon (AC)-asymmetric supercapacitor (ASC) achieves an energy density of 22.5 Wh kg⁻¹ at 500 W kg⁻¹ and maintains outstanding cycling stability. This work provides valuable insights into the design and application of N-GQDs for advanced energy storage devices. Full article

Oil sands drilling frequently contaminates water-based xanthan gels with highly viscous asphaltenes, collapsing their three-dimensional network and causing barite sag, high fluid loss and poor cuttings transport. Nitrogen-functionalized carbon quantum dots (N-CQDs) were hydrothermally synthesised from citric acid and 1-hexadecylamine and characterised by means of FT-IR, TEM and TGA. The concentration-dependent influence of N-CQDs (0–1.2 wt%) on gel viscoelasticity, microstructure and filtration properties was evaluated through rheometry, API and fluid-loss tests. At 0.01 wt% N-CQDs, the viscosity of the adsorbed oil phase dropped by 50% and the mean droplet diameter decreased from 247.7 µm to <100 µm. Consequently, the xanthan gel exhibited a significant enhancement in its mechanical strength and fluid loss performance. Wax-crystal growth was simultaneously inhibited, lowering the pour point by 6 °C. N-CQDs act as nanospacers that disrupt π-stacking of asphaltenes and hydrogen-bond to the polymer backbone, thereby restoring gel strength and sealing capacity. The work provides a sustainable, low-toxicity route to rejuvenate gel-based drilling fluids contaminated by heavy oil and facilitates their reuse in oil sands reservoirs. Full article

The widespread presence of antibiotic residues, particularly norfloxacin (NFX), in food products and the environment has raised concern, underscoring the need for sensitive and selective detection methods. In this study, a novel broccoli-derived nitrogen-doped carbon quantum dots (N-CQDs) was synthesized via a green hydrothermal approach, 4-dimethylaminopyridine (DMAP) as both a nitrogen dopant and a functionalizing agent. The synthesized N-CQDs exhibit an average diameter of approximately ~4.2 nm and emit bright blue fluorescence, with a maximum emission at 445 nm upon excitation at 360 nm. A “Turn-ON” response toward NFX was achieved with a detection limit of 0.30 nM, attributed to hydrogen bonding and π–π stacking interactions that suppressed non-radiative decay. Moreover, the sensor demonstrates high selectivity for NFX, effectively distinguishing it from common interfering substances, including other antibiotics, organic acids, and biomolecules. The N-CQDs also exhibit excellent stability under diverse conditions, such as varying pH levels, high ionic strength, and prolonged irradiation. Finally, the practical applicability of the developed sensor was validated by detecting NFX in spiked broccoli extract and milk samples, with recovery rates ranging from 98.2% to 100.1% and relative standard deviations of less than 2.0%. This work presents a sustainable and efficient N-CQD-based fluorescent sensing platform, offering significant potential for rapid and reliable detection of NFX in food safety and environmental monitoring. Full article

In this study, blue fluorescence carbon dots of high quantum yield (42.96%) were successfully synthesized via a one-step hydrothermal method using Pueraria residues as the precursor and urea as the nitrogen source. The preparation process was simple, was environmentally friendly, and did not use toxic chemicals, with the resulting nitrogen-doped Pueraria carbon dots (N-PCDs) exhibiting excellent dispersibility, regular morphology and stable fluorescence performance. Moreover, fluorescence quenching could be induced through electron transfer between N-PCDs and hexavalent chromium (Cr(VI)) in water, which enabled the application of N-PCDs as a fluorescent probe for sensing Cr(VI) in water, with a limit of detection (LOD) and limit of quantitation (LOQ) of 0.078 μM and 0.26 μM, respectively. The effectiveness of the proposed fluorescent probe was also validated in various water matrices, achieving stable recovery rates ranging from 98.7% to 101.5%. Furthermore, experimental investigations and theoretical calculations through density functional theory (DFT) confirmed that the underlying reaction mechanism was photoinduced electron transfer (PET). Above all, this study not only demonstrated the potential of N-PCDs as sensitive probes to sense toxic elements in the environment, but also promotes the green and scalable production of high-value carbon-based products from waste biomass. Full article

Nitrogen-doped carbon dots (NCDs) exhibiting superior fluorescence characteristics were synthesized employing o-phenylenediamine and 2-methylimidazole as precursors. The synthesized NCDs exhibited yellow photoluminescence with an excitation/emission maxima of 410/554 nm with a quantum yield of 28.41%. The presence of pyridinic N, pyrrolic N, graphitic N, and amino N functionalities on the NCDs’ surface provided strong evidence for the successful nitrogen doping of the carbon dots. Upon exposure to hydrogen peroxide (H₂O₂), the NCDs exhibited a significant reduction in fluorescence intensity, which could be restored by the addition of ascorbic acid (AA), demonstrating a quantitative relationship between ascorbic acid and fluorescence efficiency. A novel fluorescence “off–on” system utilizing these NCDs was developed for the quantification of AA. The sensing mechanism relies on H₂O₂-induced fluorescence quenching via the selective oxidation of the NCDs’ surface, followed by fluorescence restoration upon AA addition due to the reduction in surface defects. Meanwhile, further experiments confirmed that the quenching mechanism was static quenching. The NCDs demonstrated a limit of detection (LOD) of 0.605 μM for AA detection. The use of NCDs for AA sensing was validated through the analysis of commercially available beverages. This study aimed to establish a simplified method for ascorbic acid detection. The experimental findings indicated that the developed technique exhibited high accuracy in quantifying ascorbic acid. These findings suggest that the developed NCDs possess considerable potential as a multifunctional sensing tool for various analytical applications. Full article

Fluorescent carbon dots are nontoxic nanoparticles composed of carbon, exhibiting advantageous properties for applications in bioimaging and functional materials. We present a methodology for synthesizing fluorescent nitrogen-doped carbon dots (N-CDs) using starch, a biopolymer, and urea as the sources of nitrogen, via the microwave-assisted hydrothermal method. Furthermore, the dependence of the fluorescence spectra and fluorescence quantum yield of N-CDs on the initial concentration of urea in the reactant solution was examined, thereby providing a comprehensive understanding of the influence of nitrogen doping on the CDs. The fluorescence of N-CDs was tunable by varying the excitation wavelength. Stronger fluorescence intensity was observed for a moist phosphate salt/N-CD composite, in contrast to the weaker fluorescence exhibited by a dried one. Fluorescence lifetime measurements revealed that the change in fluorescence intensity can be attributed to the suppression of the non-radiative deactivation process. This observation highlights the critical importance of the interaction between water molecules and surface functional groups in controlling the photophysics of the excited state of N-CDs. Full article

Carbon quantum dots (CQDs), a distinctive class of fluorescent carbon nanomaterials, exhibit considerable potential for widespread application across several industries due to their safety, environmental sustainability, excellent water solubility, and tunable yet stable fluorescence properties. Nevertheless, the mass field is limited, and the cost of production is higher for the majority of methods. This study examines a cost-effective approach for the hydrothermal synthesis of nitrogen-doped carbon quantum dots (N-CQDs) from wood using NH₃·H₂O as the nitrogen precursor, facilitated by H₂O₂ and ultraviolet light. The produced N-CQDs demonstrate superior crystallinity and solubility in water, with the average particle size of 5.02 nm. After 10 experiments under the same conditions, a significant and stable yield of 5.04 g (42 wt%) was finally obtained by hydrothermal synthesis. The N-CQDs solution exhibits green fluorescence when exposed to ultraviolet light, and its fluorescence performance is influenced by concentration and excitation wavelength. Furthermore, it explores their application in identifying Fe (III) in water. The surface of N-CQDs is abundant in hydrophilic hydroxyl groups, distinctive nitrogen-containing groups, and various oxygen-containing functional groups. Fe (III) can extinguish fluorescence in water. The ratio of fluorescence intensity before and after to the addition of Fe (III) solution to the N-CQDs solution (F₀/F) exhibits the effective linear correlation within the concentration range of 0.1 to 100 μmol/L. Within the concentration range of 100 to 1000 μmol/L, the increase in Fe (III) concentration results in substantial aggregation of Fe (III) and N-CQDs, along with a blue shift in the fluorescence wavelength. This discovery possesses significant potential for the synthesis and application of environmentally friendly, high-yield N-CQDs. Full article

Tramadol is a widely used pain medication detected in wastewater treatment plants, prompting concerns about its impact on the environment and the effectiveness of wastewater treatment. Nitrogen-doped carbon quantum dots (NCQDs) can be used to remove pollutants from the contaminated water sources. However, NCQDs can hardly be recovered after applications, leading to high regeneration costs. Thus, this study aims to explore the use of magnetite nitrogen-doped carbon quantum dots (magnetite NCQDs) fabricated from empty fruit bunches (EFBs) to remove tramadol from wastewater treatment. Various analytical methods were conducted to characterize the magnetite NCQDs. Magnetite NCQDs showed excellent separation and aggregate-free properties. This study investigated the effect of the initial concentration of tramadol, the dosage of magnetite NCQD adsorbent, and the contact time while keeping other parameters constant. Tramadol was efficiently adsorbed within 40 min with an adsorption efficiency of over 85.9% and further photodegraded by 4.5% after being exposed to UV light after undergoing photocatalysis for 50 min. Magnetite NCQDs exhibited outstanding properties in removing tramadol after undergoing five cycles. This research provides a promising approach for developing a highly efficient adsorbent for treating tramadol-contaminated wastewater. Full article

The need for eco-friendly, cost-effective, and scalable methods to synthesize carbon quantum dots (CQDs) remains a critical goal in nanotechnology. In this work, nitrogen-doped carbon quantum dots (N-CQDs) were successfully synthesized using cellulose nanocrystals (CNCs) derived from microcrystalline cellulose (MCC) and urea through a rapid one-step microwave-assisted method. The use of renewable cellulose as a precursor aligns with sustainable practices, offering a pathway to transform agricultural waste into valuable nanomaterials. Characterized by TEM, XRD, Raman, XPS, and PL spectroscopy, the N-CQDs demonstrated outstanding optical properties, including strong excitation-dependent fluorescence with an emission maximum at 420 nm. The N-CQDs exhibited exceptional selectivity and sensitivity toward Fe³⁺, achieving a detection limit of 75 nM. Additionally, the pH-dependent fluorescence and stability in diverse conditions highlight the N-CQDs’ versatility in environmental monitoring. This study establishes a foundation for using agricultural waste to produce high-performance nanostructures for sensing applications, advancing green nanotechnology and environmental solutions. Full article

Improving the photogenerated carrier separation efficiency of individual semiconductor materials has always been a key challenge in photocatalysis. In this study, we synthesized a novel photocatalytic material, N-CQDs/UBWO, in situ by combining nitrogen-doped carbon quantum dots (N-CQDs) derived from discarded corn stover with ultrathin Bi₂WO₆ nanosheets (UBWO). Detailed characterization indicates that the random distribution of N-CQDs on the UBWO surface increases the specific surface area of UBWO, which is beneficial for the adsorption and degradation of oxytetracycline (OTC). More importantly, N-CQDs act as electron acceptors, promoting the effective separation of photogenerated charges, prolonging the lifetime of charge carriers in UBWO, and thereby enhancing the degradation efficiency of OTC. As a result, the optimized 3wt%N-CQDs/UBWO could degrade 85% of OTC within 40 min under visible light, with a removal rate four times that of pure Bi₂WO₆. The performance of photocatalytic degradation over OTC by 3wt%N-CQDs/UBWO exceeds that of most reported Bi₂WO₆-based photocatalysts. The EPR analysis confirmed that ∙O₂⁻ and ∙OH are the main active species in the photocatalytic degradation of OTC on 3wt%N-CQDs/UBWO. This study provides insight into designing green, low-cost, and efficient photocatalysts using CQDs derived from waste biomass and the degradation of emerging pollutants like antibiotics. Full article

The detection of heavy metal ions and organic pollutants from water sources remains critical challenges due to their detrimental effects on human health and the environment. Herein, a nitrogen and sulfur co-doped carbon quantum dot (NS-CQDs) fluorescent sensor was developed using a microwave-assisted carbonization method for the detection of Fe³⁺ ions and hydroquinone (HQ) in aqueous solutions. NS-CQDs exhibit excellent optical properties, enabling sensitive detection of Fe³⁺ and HQ, with detection limits as low as 3.40 and 0.96 μM. Notably, with the alternating introduction of Fe³⁺ and HQ, NS-CQDs exhibit significant fluorescence (FL) quenching and recovery properties. Based on this property, a reliable “on-off-on” detection mechanism was established, enabling continuous and reversible detection of Fe³⁺ and HQ. Furthermore, the low cytotoxicity of NS-CQDs was confirmed through successful imaging of HeLa cells, indicating their potential for real-time intracellular detection of Fe³⁺ and HQ. This work not only provides a green and rapid synthesis strategy for CQDs but also highlights their versatility as fluorescent probes for environmental monitoring and bioimaging applications. Full article

Accurate water content detection is crucial for optimizing chemical reactions, ensuring product quality in pharmaceutical manufacturing, and maintaining food safety. In this study, nitrogen and sulfur co-doped graphene quantum dots (R-GQDs) were synthesized via a one-step hydrothermal method using o-phenylenediamine as the carbon source. The synthesis conditions, including reaction time, temperature, o-phenylenediamine concentration, and H₂SO₄/water ratio, were optimized using the Box-Behnken response surface methodology. The R-GQDs exhibited excellent fluorescence stability and distinct solvent-dependent characteristics, alongside a broad linear detection range and high sensitivity, making them highly suitable for dual-mode water content detection (colorimetric and fluorescent). To enhance the accuracy of visual detection, R-GQDs were incorporated into portable test strips with smartphone-assisted analysis, compensating for the human eye’s limitations in distinguishing subtle color changes. The sensor’s practical utility was validated through spiked recovery experiments in food samples, and the R-GQDs demonstrated good biocompatibility for in vivo imaging in shrimp. These findings highlight a novel strategy for developing portable, real-time water content sensors with potential applications in both portable detection systems and biological imaging. Full article

Fluorescent nanoparticles known as quantum dots (QDs) have unique properties that make them useful in biomedicine. Specifically, CdSe/ZnS QDs, while good at fluorescing, show toxicity. Due to this, safer alternatives have been developed. This study uses a tetrazolium dye (XTT) viability assay, reactive oxygen species (ROS) fluorescent imaging, and apoptosis to investigate the effect of QD alternatives InP/ZnS, CuInS₂/ZnS, and nitrogen-doped carbon dots (NCDs) in liver cells. The liver is a possible destination for the accumulation of QDs, making it an appropriate model for testing. A cancerous liver cell line known as HepG2 and an immortalized liver cell line known as THLE-2 were used. At a nanomolar range of 10–150, HepG2 cells demonstrated no reduced cell viability after 24 h. The XTT viability assay demonstrated that CdSe/ZnS and CuInS₂/ZnS show reduced cell viability in THLE-2 cells with concentrations between 50 and 150 nM. Furthermore, CdSe/ZnS- and CuInS₂/ZnS-treated THLE-2 cells generated ROS as early as 6 h after treatment and elevated apoptosis after 24 h. To further corroborate our results, apoptosis assays revealed an increased percentage of cells in the early stages of apoptosis for CdSe/ZnS-treated (52%) and CuInS₂/ZnS-treated (38%) THLE-2. RNA transcriptomics revealed heavy downregulation of cell adhesion pathways such as wnt, cadherin, and integrin in all QDs except NCDs. In conclusion, NCDs show the least toxicity toward these two liver cell lines. While demonstrating less toxicity than CdSe/ZnS, the metallic QDs (InP/ZnS and CuInS₂/ZnS) still demonstrate potential concerns in liver cells. This study serves to explore the toxicity of QD alternatives and better understand their cellular interactions. Full article

Trace elements such as cobalt (Co), molybdenum (Mo), and zinc (Zn) play necessary roles in different biological functions. Co is a microelement that influences the vascular system. Mo works as an enzymatic cofactor of three enzymes (aldehyde oxidase, sulfite oxidase, and xanthine oxidase dehydrogenase). However, these elements are difficult to detect, since the analytical methods developed have a high cost, which restrict their applicability. In this sense, fluorescent sensors are an alternative for detecting trace elements, such as Mo⁴⁺ ions. Herein, a new multichannel trace elements sensor has been proposed to detect Mo entities. In this sense, two different N-CQDs were synthesized and fully characterized. The N-CQDs presented quantum yield values of 25.93% and 6.02% and excellent solubility in water. Also, a mixture of these two carbon-based nanoparticles was used to identify and to quantify Mo in water between seven different trace elements. The method was found to reach 1.28 and 3.88 ppm for limit of detection (LOD) and quantification (LOQ), respectively. To further verify the potential of the detection platform, the multichannel sensor was applied to identify the different concentrations of metal ions (Fe²⁺, Co²⁺, Mn²⁺, Cu²⁺, Zn²⁺, Mg²⁺, and Mo⁴⁺) in water. The data matrix was treated using different algorithms, such as K-Means and Discriminant Analysis (DA). The detection strategy has successfully identified the molybdenum ions at 5 ppm. This result shows the potential application of a multichannel sensor toward the detection of Mo entities, since it is comparable with the molybdenum test already available on the market. Full article

Carbon quantum dots (CQDs) have been investigated for biomedical applications in medical imaging due to their fluorescent properties, overall long-term stability, and excellent cytocompatibility and biocompatibility. Lignin is an organic polymer in the tissues of woody plants. It is also considered a byproduct of the wood and pulp industries. Hence, it presents as a renewable source of carbon nanoparticles. In this study, we report the synthesis and material and biological characterization of two colloidal suspensions of CQDs in water derived from lignin-based carbon. One was the native form of CQDs derived from lignin carbon, and the second was doped with nitrogen to evaluate material differences. Material characterization was carried out using various commonly used techniques, including Fourier transform infrared spectroscopy (FTIR), emission and absorbance spectra, zeta potential, transmission electron microscopy (TEM), and scanning electron microscopy (SEM). Thin films of CQDs were formed on glass and silicon substrates to assess the in vitro cytocompatibility with human mesenchymal stem cells (hMSCs). Observations suggest that the two forms of CQDs promote cell attachment within 24 h and sustain it for at least 7 days. The overall structure and shape of cells suggest a lack of any adverse or toxic effects of CQDs. The data lay down the novel foundation to support the use of lignin-derived CQDs in tissue engineering applications. Full article