Search Results (28)

Nail cosmetics, such as nail polish or nail conditioners, are considered as safe; however, their use may be accompanied with risks, e.g., related to contact of allergens with the periungual skin or to the transfer of a small amount of cosmetic to other areas of the skin. Therefore, the identification of potentially dangerous ingredients of nail cosmetics is of importance. In this work non-volatile organic compounds present in nail conditioners were analyzed by high-pressure liquid chromatography-mass spectrometry. Unexpectedly, in two samples the esters of phthalic acid with neopentyl glycol and mixed esters of phthalic acid with neopentyl glycol/propylene glycol were detected. Their structures were deduced on the basis of characteristic fragmentation pathways. It is reasonable to suppose that these compounds were formed by the reaction between the ingredients of the analyzed samples. The second group of the detected non-volatile organic compounds were quaternary ammonium salts, which are quite common in cosmetic products. These compounds were most probably transferred to the conditioners from the material from the inside of barrels in which the nail conditioners were stored. Although the presence of detected non-volatile organic compounds in nail conditioners is not particularly dangerous to human health, it is worth knowing that they can occur in the analyzed type of cosmetic products. Full article

The bacterial flagellum, a complex nanomachine composed of numerous proteins, is utilized by bacteria for swimming in various environments and plays a crucial role in their survival and infection. The flagellar motor is composed of a rotor and stator complexes, with each stator unit functioning as an ion channel that converts flow from outside of cell membrane into rotational motion. Paenibacillus sp. TCA20 was discovered in a hot spring, and a structural analysis was conducted on the stator complex using cryo-electron microscopy to elucidate its function. Two of the three structures (Classes 1 and 3) were found to have structural properties typical for other stator complexes. In contrast, in Class 2 structures, the pentamer ring of the A subunits forms a C-shape, with lauryl maltose neopentyl glycol (LMNG) bound to the periplasmic side of the interface between the A and B subunits. This interface is conserved in all stator complexes, suggesting that hydrophobic ligands and lipids can bind to this interface, a feature that could potentially be utilized in the development of novel antibiotics aimed at regulating cell motility and infection. Full article

This report presents the first results on broadband dielectric spectroscopy insights into ODIC-forming neopentyl glycol (NPG) under compression up to the GPa domain. Particular attention was paid to the strongly discontinuous phase transition: orientationally disordered crystal (ODIC)–solid crystal. The insights cover static, dynamic, and energy-related properties, namely evolutions of the dielectric constant, DC electric conductivity, and dissipation factor. Worth stressing are results regarding the pressure-related Mossotti catastrophe-type behavior of the dielectric constant, the novel approach to non-Barus dynamics, and the discussion on fundamentals of dissipation factor changes in NPG. The results presented in the given report also introduce new experimental evidence and model discussions regarding the nature of ODIC mesophase and discontinuous phase transitions. Notable is the significance of understanding the nature of the colossal barocaloric effect in NPG. Full article

Polyester-based polyurethane coatings were widely used in automotive, industrial, construction, and plastics industries due to their excellent mechanical properties, adhesion, and relatively outstanding oil and chemical resistance. In these coatings, the type and ratio of polyester and isocyanate curing agents influenced the cohesion energy, hydrogen bonding, crystallinity, crosslinking density, molecular weight, and morphology of the polyurethane at the microscopic level, thereby affecting the macroscopic mechanical properties, electrical performance, and environmental resistance of the material. However, there was limited systematic research on the effect of crosslinking density on the properties of polyester-based polyurethanes. In this study, an HTP-1 system was composed of neopentyl glycol (NPG) and phthalic anhydride (PA), and an HTP-2 system was composed of neopentyl glycol (NPG), hexahydrophthalic anhydride (HHPA), and adipic acid (AA). A series of polyesters (HTPs) were synthesized by adding polyols with different functional groups and adjusting their proportions in the system. The synthesized polyester was characterized using FT-IR, GPC, and DSC, and then cured with polyisocyanate curing agent N3390 to prepare the coating. The following properties of the films were evaluated: adhesion, impact resistance, pencil hardness, gloss, flexibility, oil resistance, and weather resistance. The results showed that in the HTP-1 system, the introduction of dipentaerythritol resulted in a polyester with a broad molecular weight distribution at high hydroxyl values, with a maximum PDI of 12.66 and a glass transition temperature (Tg) reaching 40.19 °C. The polyesters prepared by introducing three types of multifunctional polyols into the HTP-1 system exhibited good impact resistance, adhesion, and hardness. At low hydroxyl values, the coatings demonstrated good flexibility, but due to the lower crosslinking density, the oil resistance was poor. As the hydroxyl value increased, flexibility decreased, while oil resistance improved. In the HTP-2 system, coatings prepared with three different multifunctional polyols showed good impact resistance, flexibility, and hardness at low hydroxyl values but poor adhesion and oil resistance. As the hydroxyl value increased, adhesion improved from grade 1 to grade 0, and oil resistance improved for coatings prepared with trimethylolpropane and ditrimethylolpropane. However, the oil resistance of coatings prepared with dipentaerythritol decreased. Regarding weather resistance, the HTP-1-series resins primarily exhibited the cleavage of -CH₂ groups, while the HTP-2-series resins showed the cleavage of C-N bonds. Overall, the HTP-2 series resins demonstrated better weather resistance. In the high-hydroxyl-value HTP-2 system, the incorporation of trimethylolpropane or ditrimethylolpropane has been shown to produce coatings that achieve a balance among mechanical properties, flexibility, and oil resistance. This finding provides valuable insights for the design and development of high-performance polyester-based polyurethane coatings. Full article

In the current environmental scenario, the proposal of alternatives for petroleum-based products has considerably increased, with the aim of looking for bioproducts with interesting properties such as biodegradability, sustainability and efficiency, among others. In this sense, the role of biolubricants is promising, offering a wide range of possibilities through different methods and operating conditions. Specifically, double transesterification could be a suitable process in a biorefinery context. The aim of this work was to produce a biolubricant through double transesterification with methanol and neopentyl glycol (NPG) under different reaction conditions by using homogeneous catalysis (sodium methoxide). Different catalyst concentrations, among other changes in reaction conditions (temperature ranging between 100 and 140 °C and NPG/FAME ratios between 0.5 and 2), were used, obtaining high conversion values (96%) and a final product with a high viscosity (20.7 cSt), which allows for its use as engine oil (SAE 5W). In conclusion, biodiesel and biolubricant production was feasible through homogeneous catalysis, proving the feasibility of this process at the laboratory scale. Further studies, including the use of different heterogeneous catalysts, as well as the implementation of this process at a semi-industrial scale, are recommended. Full article

The paper presents the ‘progressive review’ for high pressure preservation/processing (HPP) (cold pasteurization) of foods and the next-generation high-pressure and high temperature (HPHT, HPT) food sterilization technologies. It recalls the basics of HPP and HPT, showing their key features and advantages. It does not repeat detailed results regarding HPP and HPT implementations for specific foods, available in numerous excellent review papers. This report focuses on HPP and HPT-related issues that remain challenging and can hinder further progress. For HPP implementations, the reliable modeling of microorganisms’ number decay after different times of high pressure treatment or product storage is essential. This report indicates significant problems with model equations standard nonlinear fitting paradigm and introduces the distortion-sensitive routine enabling the ultimate validation. An innovative concept based on the barocaloric effect is proposed for the new generation of HPT technology. The required high temperature appears only for a strictly defined short time period controlled by the maximal pressure value. Results of the feasibility test using neopentyl glycol as the barocaloric medium are presented. Attention is also paid to feedback interactions between socioeconomic and technological issues in the ongoing Industrial Revolution epoch. It indicates economic constraints for HPP and HPT developments and emerging business possibilities. The discussion recalls the inherent feedback interactions between technological and socioeconomic innovations as the driving force for the Industrial Revolution epoch. Full article

This report presents the low-frequency (LF), static, and dynamic dielectric properties of neopentyl glycol (NPG), an orientationally disordered crystal (ODIC)-forming material important for the barocaloric effect applications. High-resolution tests were carried out for $173\mathrm{K}<T<440K$, in liquid, ODIC, and solid crystal phases. The support of the innovative distortion-sensitive analysis revealed a set of novel characterizations important for NPG and any ODIC-forming material. First, the dielectric constant in the liquid and ODIC phase follows the Mossotti Catastrophe-like pattern, linked to the Clausius–Mossotti local field. It challenges the heuristic paradigm forbidding such behavior for dipolar liquid dielectrics. For DC electric conductivity, the prevalence of the ‘critical and activated’ scaling relation is evidenced. It indicates that commonly applied VFT scaling might have only an effective parameterization meaning. The discussion of dielectric behavior in the low-frequency (LF) domain is worth stressing. It is significant for applications but hardly discussed due to the cognitive gap, making an analysis puzzling. For the contribution to the real part of dielectric permittivity in the LF domain, associated with translational processes, exponential changes in the liquid phase and hyperbolic changes in the ODIC phase are evidenced. The novelty also constitutes $tg\mathit{\delta }$ temperature dependence, related to energy dissipation. The results presented also reveal the strong postfreezing/pre-melting-type effects on the solid crystal side of the strongly discontinuous ODIC–solid crystal transition. So far, such a phenomenon has been observed only for the liquid–solid crystal melting transition. The discussion of a possible universal picture of the behavior in the liquid phase of liquid crystalline materials and in the liquid and ODIC phases of NPG is particularly worth stressing. Full article

The application of polyesters as food contact materials is an alternative to epoxy resin coatings, which can be a source of endocrine migrants. By using high-pressure liquid chromatography/electrospray ionization–mass spectrometry (HPLC/ESI-MS) with cone voltage-induced fragmentation in-source, a number of polyester-derived migrants were detected in the extracts of inner coatings of metallic cans. The polyester-derived migrants were detected in each inner coating of fish product-containing cans (5/5) and in one inner coating of meat product-containing can (1/5). They were not detected in the inner coatings of vegetable/fruit product-containing cans (10 samples). The respective detected parent and product ions enabled differentiation between cyclic and linear compounds, as well as unambiguous identification of diol and diacid units. Most of the detected compounds, cyclic and linear, were composed of neopentyl glycol as diol and two diacid comonomers, namely isophthalic acid and hexahydrophthalic acid. The other detected oligoesters were composed of neopentyl glycol or propylene glycol and adipic acid/isophthalic acid as comonomers. The compounds containing propylene glycol as diol were found to be exclusively linear cooligoesters. On the basis of abundances of [M+Na]⁺ ions, the relative contents of cyclic and linear oligoesters were evaluated. Full article

In this paper, urethane-based acrylates (UA) were prepared via an environmentally friendly non-isocyanate route. Isophorone diamine (IPDA) reacted with ethylene carbonate (EC), producing carbamate containing amine and hydroxyl groups, which further reacted with neopentyl glycol diacrylate (NPGDA) by aza Michael addition, forming UA. The structures of the obtained intermediates and UA were characterized by ¹H NMR and electrospray ionization high-resolution mass spectrometry (ESI-HRMS). The photopolymerization kinetics of UA were investigated by infrared spectroscopy. The composite with obtained UA can be UV cured quickly to form a transparent film with a tensile strength of 21 MPa and elongation at break of 16%. After UV curing, the mono-functional urethane acrylate was copolymerized into the cross-linked network in the form of side chains. The hydroxyl and carbamate bonds on the side chains have high mobility, which make them easy to form stronger dynamic hydrogen bonds during the tensile process, giving the material a higher tensile strength and elongation at break. Therefore, the hydrogen bonding model of a cross-linked network is proposed. The composite with UA can be 3D printed into models. Full article

Membrane proteins constitute about 20% of the human proteome and play crucial roles in cellular functions. However, a complete understanding of their structure and function is limited by their hydrophobic nature, which poses significant challenges in purification and stabilization. Detergents, essential in the isolation process, risk destabilizing or altering the proteins’ native conformations, thus affecting stability and functionality. This study leverages single-particle cryo-electron microscopy to elucidate the structural nuances of membrane proteins, focusing on the SLAC1 bacterial homolog from Haemophilus influenzae (HiTehA) purified with diverse detergents, including n-dodecyl β-D-maltopyranoside (DDM), glycodiosgenin (GDN), β-D-octyl-glucoside (OG), and lauryl maltose neopentyl glycol (LMNG). This research not only contributes to the understanding of membrane protein structures but also addresses detergent effects on protein purification. By showcasing that the overall structural integrity of the channel is preserved, our study underscores the intricate interplay between proteins and detergents, offering insightful implications for drug design and membrane biology. Full article

Recently, photocurable coatings are being used frequently. However, it is worth mentioning that the use of photopolymerization has its drawbacks, especially in the case of curing coatings on three-dimensional surfaces and in places that are difficult to access for UV radiation. However, it is possible to develop a system in which UV technology and thermal methods for curing coatings can be combined. Moreover, the obtained resins are derived from low-viscosity epoxy resins or diglycidyl ethers, making them an ideal building material for photopolymerization-based three-dimensional printing techniques. Due to the need to improve this method, a series of epoxy (meth)acrylates containing both epoxy and (meth)acrylate groups were obtained via the addition of acrylic or methacrylic acid to epoxy resin, diglycydylether of bisphenol A epoxy resin (DGEBA), cyclohexane dimethanol diglycidyl ether (CHDMDE) and neopentyl glycol diglycidyl ether (NPDE). The structures of the synthesized copolymers were confirmed through spectroscopic analysis (FTIR) and studied regarding their nonvolatile matter content (NV) and acid values (PAVs), as well as their epoxy equivalent values (EEs). Due to the presence of both epoxy and double carbon–carbon pendant groups, two distinct mechanisms can be applied: cationic and radical. Hence, the obtained resins can be cured using UV radiation with thermally appropriate conditions and initiators. This type of method can be used as a solution to many problems currently encountered in using UV technology, such as failure to cure coatings in underexposed areas as well as deformation of coatings. Synthesized epoxy (meth)acrylate prepolymers were employed to formulate photocurable coating compositions. Furthermore, the curing process and properties of cured coatings were investigated regarding some structural factors and parameters. Among the synthesized materials, the most promising are those based on epoxy resin, characterized by their high glass transition temperature values and satisfactory functional properties. Full article

Branched-chain esters (BCEs) have found a large number of applications in cosmetics. Among them, neopentyl glycol dilaurate (NPGDL) stands out as an emollient, emulsifier, and skin-conditioning agent. This work presents the synthesis of NPGDL in a solvent-free medium using the two most common immobilized lipases: Novozym^® 40086 (Rml) and Novozym^® 435 (CalB). Results proved that the former biocatalyst has lower activity and certain temperature deactivation, although conversions ≥ 90% were obtained at 60 °C and 7.5% of catalyst. On the other hand, optimal reaction conditions for Novozym^® 435 are 3.75% w/w of the immobilized derivative at 80 °C. Under optimal conditions, the process productivities were 0.105 and 0.169 kg NPGDL/L h, respectively. In order to select the best conditions for NPGDL production, studies on the reuse of the derivative and cost estimation have been performed. Economic study shows that biocatalytic processes can be competitive when lipases are reused for five cycles, yielding biocatalyst productivities of 56 and 122 kg NPGDL/kg biocatalyst using Novozym^® 40086 and Novozym^® 435, respectively. The final choice will be based on both economic and sustainability criteria. Green metric values using both biocatalysts are similar but the product obtained using Novozym^® 40086 is 20% cheaper, making this alternative the best option. Full article

Cu-based catalysts, modified by gallium addition via the stepwise co-precipitation method, were studied for the liquid phase hydrogenation of hydroxypivalaldehyde (HPA) to neopentyl glycol (NPG). Through physico-chemical techniques, the effects of gallium introduction on the Cu trimetallic catalyst performance and the reaction mechanism of HPA hydrogenation were discussed. The characterization results showed that gallium introduction can influence the dispersion, reduction, and distribution of active Cu species, as well as their reactivity. Herein, the catalyst with 2 wt% gallium addition exhibited excellent catalytic performance with HPA conversion rate and NPG selectivity of 93.5% and 95.5%, at a reaction pressure of 3 MPa, temperature of 110 °C, hydrogen-aldehyde ratio (molar ratio) 10:1, and liquid space-time at a speed of 8.4 h⁻¹. The good performance could be attributed to gallium doping tending to dynamically tune the interaction between the components, increasing Cu dispersion and the distributions of Cu⁺ and Cu⁰ species on the catalyst surfaces. Full article

Lignocellulosic waste-streams are resources worth investigating to produce value-added bioproducts due to their low-cost, renewability, versatility, and abundance. This study evaluated five Zygomycota strains as potential oleaginous microorganisms for direct bioconversion of cakes derived from the vegetable-oil-milling industry into microbial oil. Solid-state fermentation (SSF) conditions in tray bioreactors revealed that temperature, moisture content, and substrate affected lipid production and fatty acids composition. Employing SSF, under optimal conditions (30 °C, 65% initial moisture content), and substrate supplementation with nitrogen sources increased lipid productivity 1.1-fold on palm kernel cake (PKC) substrate. Supplementation strategies using glycerol, molasses, or mineral solution did nοt favor lipid production. When cotton seed cake (CoSC) was applied, C. echinulata was able to produce 304.1 mg/gfs of biomass with a lipid content of 40.2% (w/w) in tray bioreactors. Scaling-up SSF using CoSC in packed bed reactors led to the highest biomass production (320.5 mg/gfs), while lipids production was unaffected. Then, microbial oil was enzymatically converted into polyol esters achieving the highest conversion yield of 80% after 2 h. Physicochemical properties of polyol esters demonstrated their potential utilization as biolubricants. The present study showed the perspective of bioconverting industrial side streams into microbial oil and a route for sustainable synthesis of oleochemicals. Full article

Deep eutectic solvents (DESs) are a class of green and tunable solvents that can be formed by mixing constituents having very low melting entropies and enthalpies. As types of materials that meet these requirements, plastic crystalline materials (PCs) with highly symmetrical and disordered crystal structures can be envisaged as promising DES constituents. In this work, three PCs, namely, neopentyl alcohol, pivalic acid, and neopentyl glycol, were studied as DES constituents. The solid–plastic transitions and melting properties of the pure PCs were studied using differential scanning calorimetry. The solid–liquid equilibrium phase diagrams of four eutectic systems containing the three PCs, i.e., L-menthol/neopentyl alcohol, L-menthol/pivalic acid, L-menthol/neopentyl glycol, and choline chloride/neopentyl glycol, were measured. Despite showing near-ideal behavior, the four studied eutectic systems exhibited depressions at the eutectic points, relative to the melting temperatures of the pure constituents, that were similar to or even larger than those of strongly nonideal eutectic systems. These findings highlight that a DES can be formed when PCs are used as constituents, even if the eutectic system is ideal. Full article