Search Results (34)

Produced water, a typical byproduct of oil and gas extraction, is considered a significant environmental and health problem due to its heavy metals content. The objective of this study is to evaluate and compare the efficiency of seven low-cost, waste-derived adsorbents in removing Cr³⁺, Cu²⁺, Fe²⁺, Zn²⁺, and Pb²⁺ from simulated produced water. The sorbents include gypsum, neem leaves, mandarin peels, pistachio shells, date seed powder, date seed ash, and activated carbon from date seeds. Adsorption experiments were performed using 2.5 and 5 g/L of the adsorbent. SEM and EDX analyses were used to confirm morphological changes and metal deposition after adsorption. Results showed that date seed ash exhibited the highest efficiency (85–100% across all metals), followed by activated carbon (25–98%), with strong Fe and Cu removal but a lower Pb uptake. Neem leaves, mandarin peels, and date seed powder showed moderate efficiencies (30–97%), while gypsum and pistachio shells were the least effective (0–81%). Lignocellulosic peels also showed good results due to the abundance of –OH and –COOH functional groups. Gypsum performed poorly across most metals. Integrating these waste-based adsorbents into secondary or tertiary treatment stages is an economical and sustainable solution for oil wastewater treatment. The results revealed the potential for valorizing agro-industrial and construction waste for circular economic applications in heavy metal pollution control. Full article

In Mexico, an emerging tropical nation, where cities have insufficient vegetation cover and there is little information about their provision of ecosystem services; the study of urban vegetation, as a mitigation strategy, is required. The sidewalk trees in the city of Arriaga (CAR), considered one of the warmest cities in the Mexican southeast, were counted, measured, and assessed for their effect on surface and air temperatures. There are 6239 sidewalk trees, distributed in 11 families and 13 species; 136 trees were sampled concentrating 77% in three species: Neem, Country almond and Benjamina fig. Therefore, a low H’ (1.73 nats) was obtained. The mitigating effect of tree shade on surface temperature went from 7 °C to 23 °C, depending on the day and hour, while there was not a significant refreshing effect of air temperature because the height of sidewalk trees is controlled with severe pruning to prevent damage to public wiring, causing a similar-sized stratum that traps air under the tree canopy. Consequently, an integral solution that includes, but is not limited to, urban trees is required without leaving aside increasing tree diversity, health, and equitable distribution of trees at CAR. Full article

Carbon-based metal-free catalysts, particularly those such as biomass-derived mesoporous activated carbon (AC) nanostructures, hold great promises for cost-effective and sustainable electrocatalysis for enhancing hydrogen evolution reaction (HER) performance in green energy technology. Neem and ginkgo leaves are rich in bioactive compounds and self-doping heteroatoms with naturally porous structures and act as a low-cost, sustainable biomass precursors for high-performance HER catalysts. In this study, mesoporous AC nanoflakes and nanosponges were synthesized using biomass precursors of neem and ginkgo leaves through a KOH activation process. Notably, AC nanosponges derived from ginkgo leaves exhibited outstanding physicochemical characteristics, including a sponge-like porous morphology with a large specific surface area of 1025 m²/g. For electrochemical evaluation in 0.5 M H₂SO₄, the G-AC sample revealed superior electrocatalytic HER performance, with a remarkably low overpotential of 26 mV at −10 mA/cm², a small Tafel slope of 24 mV/dec, and long-term durability over 30 h. These results depict biomass-derived mesoporous AC nanosponges to hold substantial potential for highly efficient hydrogen production, contributing significantly to the advancement of eco-friendly energy solutions. Full article

Soil has the ability to serve as a universal sink, meaning it may absorb contaminants from the environment. Additionally, plant leaves can also be used as indicators of environmental contamination. In our study, the bioaccumulation factor (BAF) was used to assess metal accumulation in the soil and leaves of the neem tree (Azadirachta indica) in Faisalabad, Pakistan. We analyzed the primary physical and chemical characteristics of the surface layer of soil in urban, suburban, and rural areas along an urbanization gradient. The ICP-OES technique was used to analyze the following elements: Ba, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Sr and Zn. The highest concentration of all elements was found in soil samples from urban areas, with an increasing tendency along with the urbanization gradient. A significant difference was found along the urbanization gradient on the plant leaves except for Cd, Cu, and Zn; a high level of pollution was measured for Ba, Pb, Co, Ni, Cr, and Cd in the urban area. We also calculated the bioaccumulation factor (BAF), but no clear pattern was found. Our findings show that high concentrations in soil do not always turn into higher plant uptake for plants. Our findings suggest that traffic and industrial emissions are likely the main cause of the metals in Faisalabad, because their concentration is higher than their background concentration. Our results also suggest that elemental analysis of soil and plant leaves is an appropriate indicator of environmental contamination. Full article

Biofilms currently represent the most prevalent bacterial lifestyle, enabling them to resist environmental stress and antibacterial drugs. Natural antibacterial agents could be a safe solution for controlling bacterial biofilms in food industries without affecting human health and environmental safety. A methanolic extract of Azadirachta indica (neem) leaves was prepared and analyzed using gas chromatography–mass spectrometry for the identification of its phytochemical constituents. Four food-borne bacterial pathogens (Bacillus cereus, Novosphingobium aromaticivorans, Klebsiella pneumoniae, and Serratia marcescens) were tested for biofilm formation qualitatively and quantitatively. The antibacterial and antibiofilm properties of the extract were estimated using liquid cultures and a microtiter plate assay. The biofilm inhibition mechanisms were investigated using a light microscope and molecular docking technique. The methanolic extract contained 45 identified compounds, including fatty acids, ester, phenols, flavonoids, terpenes, steroids, and antioxidants with antimicrobial, anticancer, and anti-inflammatory properties. Substantial antibacterial activity in relation to the extract was recorded, especially at 100 μg/mL against K. pneumoniae and S. marcescens. The extract inhibited biofilm formation at 100 μg/mL by 83.83% (S. marcescens), 73.12% (K. pneumoniae), and 54.4% (N. aromaticivorans). The results indicate efficient biofilm formation by the Gram-negative bacteria S. marcescens, K. pneumoniae, and N. aromaticivorans, giving 0.74, 0.292, and 0.219 OD at 595 nm, respectively, while B. cereus was found to have a low biofilm formation potential, i.e., 0.14 OD at 595 nm. The light microscope technique shows the antibiofilm activities with the biofilm almost disappearing at 75 μg/mL and 100 μg/mL concentrations. This antibiofilm property was attributed to DNA gyrase inhibition as illustrated by the molecular docking approach. Full article

Water stress on crops can severely disrupt crop growth and reduce yields, requiring the accurate and prompt diagnosis of crop water stress, especially in semiarid regions. Infrared thermal imaging cameras are effective tools to monitor the spatial distribution of canopy temperature (Tc), which is the basis of the daily water stress index (DWSI) calculation. This research aimed to evaluate the variability of plant water stress under different soil cover conditions through geostatistical techniques, using detailed thermographic images of Neem canopies in the Brazilian northeastern semiarid region. Two experimental plots were established with Neem cropped under mulch and bare soil conditions. Thermal images of the leaves were taken with a portable thermographic camera and processed using Python language and the OpenCV database. The application of the geostatistical technique enabled stress indicator mapping at the leaf scale, with the spherical and exponential models providing the best fit for both soil cover conditions. The results showed that the highest levels of water stress were observed during the months with the highest air temperatures and no rainfall, especially at the apex of the leaf and close to the central veins, due to a negative water balance. Even under extreme drought conditions, mulching reduced Neem physiological water stress, leading to lower plant water stress, associated with a higher soil moisture content and a negative skewness of temperature distribution. Regarding the mapping of the stress index, the sequential Gaussian simulation method reduced the temperature uncertainty and the variation on the leaf surface. Our findings highlight that mapping the Water Stress Index offers a robust framework to precisely detect stress for agricultural management, as well as soil cover management in semiarid regions. These findings underscore the impact of meteorological and planting conditions on leaf temperature and baseline water stress, which can be valuable for regional water resource managers in diagnosing crop water status more accurately. Full article

Neem leaves have long been used in traditional medicine for promoting longevity. However, the precise mechanisms underlying their anti-aging effects remain elusive. In this study, we investigated the impact of neem leaf extract (NLE) extracted from a 50% ethanol solution on the chronological lifespan of Saccharomyces cerevisiae, revealing an extension in lifespan, heightened oxidative stress resistance, and a reduction in reactive oxygen species. To discern the active compounds in NLE, LC/MS and the GNPS platform were employed. The majority of identified active compounds were found to be flavonoids. Subsequently, compound-target pharmacological networks were constructed using the STP and STITCH platforms for both S. cerevisiae and Homo sapiens. GOMF and KEGG enrichment analyses of the predicted targets revealed that “oxidoreductase activity” was among the top enriched terms in both yeast and human cells. These suggested a potential regulation of oxidative stress response (OSR) by NLE. RNA-seq analysis of NLE-treated yeast corroborated the anti-oxidative effect, with “oxidoreductase activity” and “oxidation-reduction process” ranking high in enriched GO terms. Notably, CTT1, encoding catalase, emerged as the most significantly up-regulated gene within the “oxidoreductase activity” cluster. In a ctt1 null mutant, the enhanced oxidative stress resistance and extended lifespan induced by NLE were nullified. For human cells, NLE pretreatment demonstrated a decrease in reactive oxygen species levels and senescence-associated β-galactosidase activity in HeLa cells, indicative of anti-aging and anti-oxidative effects. This study unveils the anti-aging and anti-oxidative properties of NLE while delving into their mechanisms, providing novel insights for pharmacological interventions in aging using phytochemicals. Full article

The current study aims to assess the effectiveness of three essential oils derived from neem, citrus, and garlic against papaya mealybug. Papaya seedlings were transplanted in the field in a completely randomized block design with eight treatments with four replications. The treatments included neem, citrus, and garlic oils in combination with isopropyl alcohol or paraffin oil as an adjuvant. Results from this study showed that neem oil at 1.5% + 0.2% isopropyl alcohol was effective against papaya mealybug by 93.0% equivalent to the positive control (imidacloprid) (99.4%), followed by citrus oil at 1.5% + isopropyl alcohol (76.3%) and citrus oil at 1.5% + paraffin oil (68.8%), compared with the untreated 0.01%. Similarly, application of the plant-derived essential oils and adjuvants resulted in positive effects on plant parameters (plant height, number of leaves, flower buds, number of fruits, and fruit weight) and, hence, increased papaya yield from an average of 38 to 90 fruits/plant at first harvest. The finding from this study provides an understanding of papaya farmers towards the use of natural plant products, particularly plant-derived essential oils, and their benefits, which may encourage farmers to increase papaya production and minimize the usage of synthetic pesticides to avoid pest resistance. Full article

A huge amount of textile dyes are released as industrial waste into the environment each year, which alters the water’s natural appearance and causes toxicity and carcinogenicity in the human body. Peanut husk is considered an agro-waste and contains many valuable compounds, such as cellulose. Different concentrations of cellulose were extracted from peanut husk and then loaded with bio-silver nanoparticles, which were fabricated using neem leaves (Azadirachta indica) as a reducing agent to form Ag-cellulose nanocomposites (Ag-Cell-NCMs). Different devices were used to characterize Ag-Cell-NCMs. The TEM images displayed that the size of Ag-Cell-NCMs ranged between 13.4 and 17.4 nm after dye adsorption. The Ag-Cell-NCMs were used to adsorb toxic dyes such as crystal violet (CV). Different parameters were applied, such as the ratio of cellulose to Ag-NPs, pH, contact time, adsorbent dose, dye concentration, and the temperature required to reach the optimization conditions to remove CV dye from the aqueous solution. Different kinetics and isotherm models were applied to the experimental data to explain the mechanism of the adsorption process. The adsorption of CV on Ag-Cell-NCMs follows the pseudo-second order, and the best-fit isotherm was the Langmuir isotherm. The new composite was tested for the possibility of dye desorption and ability to be reused several times, and we found that the new nanocomposite can be reused for multiple adsorptions and there is a possibility of dye desorption. Full article

Fish-process wastewater industries are a significant source of environmental pollutions and biohazard to humans and other living organisms due to suspended organics, phosphorus, and nitrate that causes environmental damage. In this study, the treatment of two types of fish wastewater was examined by applying chemical and physical methods. The chemical treatments using positive polyelectrolyte with a concentration of 25 ppm reduced the turbidity of fish wastewater by 50%; conductivity was reduced by 50% and pH was reduced from 8 to 7.2. Meanwhile, using negative polyelectrolyte and mixed polymers reduced the turbidity of fish wastewater by 30%. For applying natural material as a physical adsorbent, several natural materials were examined: ocimum leaves, Boswellia sacra leaves, Al-Shakher leaves, tephrosia leaves, neem leaves, mentha leaves, jand peel, neem wood, ocimum fruit, olive fruit peel, and palm anguish for the treatment of the fish wastewater. The initial tests indicated that the best material was palm anguish. FTIR, SEM, and EDS were used for the characterization of palm anguish. The selected material was treated with 1 M of NaOH solution. Different bed heights (10, 20, and 30 cm) of Palm anguish were applied. The results showed 80% and 85% reduction in the turbidity in both types of fish wastewater, especially with a bed height of 30 cm of the fish wastewater treated with NaOH, respectively. Notably, this study distinguishes itself by utilizing polyacrylamide flocculants of varying densities and by employing palm anguish as a natural adsorbent, which can sufficiently improve the treatment of fish-processing wastewater. Full article

Azadirachta indica has several medicinal uses, especially its leaves. Over 4000 years ago, Ayurvedic medicine used it for its therapeutic benefits. This study examined the biological activity of Neem crude extracts and green-chemically produced Ag-NPs. TPCs and TFCs were measured for polyphenolic burden in consecutive extracts. DPPH, ABTS, and FRAP experiments measured antioxidant and antimicrobial activity against seven strains of food-borne pathogenic bacteria and eight mycotoxigenic fungi. At 1000 μg/mL, ethanolic and aqueous extracts of Neem leaves had 80.10% and 69.41% in DPPH and 71.42% and 74.61% in ABTS assays for the antioxidant activity, compared to 93.58% for BHT. At 800 μg/mL, both extracts showed antioxidant activity with 57.52 and 57.87 μM in the FRAP assay, compared to 139.97 μM for Ascorbic acid. Both extracts demonstrated antimicrobial activity with 0.02 to 0.35 mg/mL as antibacterials, 0.03 to 2.17 mg/mL as antifungals, and 0.04 to 0.42 mg/mL as antibacterials. Compared to Neem crude extract, Neem Ag-NPs had the lowest MIC values as antibacterials and antifungals at 0.05 to 0.07 mg/mL and 0.07 to 0.20 mg/mL, respectively. Neem Ag-NPs and crude extract boost antioxidant and antibacterial properties. Full article

Tomato plants are among the most widely cultivated and economically important crops worldwide. Farmers’ major challenge when growing tomatoes is early blight disease caused by Alternaria solani, which results in significant yield losses. Silver nanoparticles (AgNPs) have gained popularity recently due to their potential antifungal activity. The present study investigated the potential of green synthesized silver nanoparticles (AgNPs) for enhancing the growth and yield of tomato plants and their resistance against early blight disease. AgNPs were synthesized using leaf extract of the neem tree. Tomato plants treated with AgNPs showed a significant increase in plant height (30%), number of leaves, fresh weight (45%), and dry weight (40%) compared to the control plants. Moreover, the AgNP–treated plants exhibited a significant reduction in disease severity index (DSI) (73%) and disease incidence (DI) (69%) compared to the control plants. Tomato plants treated with 5 and 10 ppm AgNPs reached their maximum levels of photosynthetic pigments and increased the accumulation of certain secondary metabolites compared to the control group. AgNP treatment improved stress tolerance in tomato plants as indicated by higher activities of antioxidant enzymes such as PO (60%), PPO (65%), PAL (65.5%), SOD (65.3%), CAT (53.8%), and APX (73%). These results suggest that using green synthesized AgNPs is a promising approach for enhancing the growth and yield of tomato plants and protecting them against early blight disease. Overall, the findings demonstrate the potential of nanotechnology-based solutions for sustainable agriculture and food security. Full article

Acne vulgaris is a common skin disorder with a complicated etiology. Papules, lesions, comedones, blackheads, and other skin lesions are common physical manifestations of Acne vulgaris, but the individual who has it also regularly has psychological repercussions. Natural oils are being utilized more and more to treat skin conditions since they have fewer negative effects and are expected to provide benefits. Using network pharmacology, this study aims to ascertain if neem oil has any anti-acne benefits and, if so, to speculate on probable mechanisms of action for such effects. The neem leaves (Azadirachta indica) were collected, verified, authenticated, and assigned a voucher number. After steam distillation was used to extract the neem oil, the phytochemical components of the oil were examined using gas chromatography–mass spectrometry (GC-MS). The components of the oil were computationally examined for drug-likeness using Lipinski’s criteria. The Pharm Mapper service was used to anticipate the targets. Prior to pathway and protein–protein interaction investigations, molecular docking was performed to predict binding affinity. Neem oil was discovered to be a potential target for STAT1, CSK, CRABP2, and SYK genes in the treatment of Acne vulgaris. In conclusion, it was discovered that the neem oil components with PubChem IDs: ID_610088 (2-(1-adamantyl)-N-methylacetamide), ID_600826 (N-benzyl-2-(2-methyl-5-phenyl-3H-1,3,4-thiadiazol-2-yl)acetamide), and ID_16451547 (N-(3-methoxyphenyl)-2-(1-phenyltetrazol-5-yl)sulfanylpropanamide) have strong affinities for these drug targets and may thus be used as therapeutic agents in the treatment of acne. Full article

The objective of the present work was to optimize the microencapsulation conditions of neem (Azadirachta indica A. Juss) leaf extracts for the biocontrol of Tenebrio molitor. The complex coacervation method was used for the encapsulation of the extracts. The independent factors considered were the pH (3, 6, and 9), pectin (4, 6, and 8% w/v), and whey protein isolate (WPI) (0.50, 0.75, and 1.00% w/v). The Taguchi L9 (3³) orthogonal array was used as the experimental matrix. The response variable was the mortality of T. molitor after 48 h. The nine treatments were applied by immersion of the insects for 10 s. The statistical analysis revealed that the most influential factor on the microencapsulation was the pH (73% of influence), followed by the pectin and WPI (15% and 7% influence, respectively). The software predicted that the optimal microencapsulation conditions were pH 3, pectin 6% w/v, and WPI 1% w/v. The signal-to-noise (S/N) ratio was predicted as 21.57. The experimental validation of the optimal conditions allowed us to obtain an S/N ratio of 18.54, equivalent to a T. molitor mortality of 85 ± 10.49%. The microcapsules had a diameter ranging from 1–5 μm. The microencapsulation by complex coacervation of neem leaf extract is an alternative for the preservation of insecticidal compounds extracted from neem leaves. Full article

This study looks at how incorporating nanofiller into sisal/flax-fibre-reinforced epoxy-based hybrid composites affects their mechanical and water absorption properties. The green Al₂O₃ NPs are generated from neem leaves in a proportion of leaf extract to an acceptable aluminium nitrate combination. Both natural fibres were treated with different proportions of NaOH to eliminate moisture absorption. The following parameters were chosen as essential to achieving the objectives mentioned above: (i) 0, 5, 10, and 15% natural fibre concentrations; (ii) 0, 2, 4, and 6% aluminium powder concentrations; and (iii) 0, 1, 3, and 5% NaOH concentrations. Compression moulding was used to create the hybrid nanocomposites and ASTM standards were used for mechanical testing such as tension, bending, and impact. The findings reveal that combining sisal/flax fibre composites with nanofiller improved the mechanical features of the nanocomposite. The sisal and flax fibre hybridised successfully, with 10% fibres and 4% aluminium filler. The water absorption of the hybrids rose as the fibre weight % increased, and during the next 60 h, all of the specimens achieved equilibrium. The failed samples were examined using scanning electron Microscopic (SEM) images better to understand the composite’s failure in the mechanical experimentations. Al₂O₃ NPs were confirmed through XRD, UV spectroscope and HPLC analysis. According to the HPLC results, the leaf’s overall concentrations of flavonoids (gallocatechin, carnosic acid, and camellia) are determined to be 0.250 mg/g, 0.264 mg/g, and 0.552 mg/g, respectively. The catechin concentration is higher than the phenolic and caffeic acid levels, which could have resulted in a faster rate of reduction among many of the varying configurations, 4 wt.% nano Al₂O₃ particle, 10 wt.% flax and sisal fibres, as well as 4 h of NaOH with a 5 wt.% concentration, producing the maximum mechanical properties (59.94 MPa tension, 149.52 Mpa bending, and 37.9 KJ/m² impact resistance). According to the results, it can be concluded that botanical nutrients may be used effectively in the manufacturing of nanomaterials, which might be used in various therapeutic and nanoscale applications. Full article