Search Results (103)

Recently, the design and fabrication of novel electrode materials for electrochemical and electronic devices have received the widespread attention of the scientific community. In particular, electrochemical sensors and supercapacitors (SCs) involve the use of catalysts, which can enhance the electrochemical reactions at the surface of the electrode. Bismuth tungstate (Bi₂WO₆) is a cost-effective and efficient electrode material with decent optoelectronic properties and stability. The properties of Bi₂WO₆ can be improved by incorporating carbon-based materials, and the resulting composite may be a promising electrode material for electrochemical sensing and SCs. As per the available reports, Bi₂WO₆ has been combined with various nanostructured and conductive materials for electrochemical sensing and SC applications. This review discusses synthetic methods for the preparation of Bi₂WO₆. Progress in the construction of hybrid composites for electrochemical sensing and SC applications is reviewed. The Conclusion section discusses the role of electrode materials and their limitations with future perspectives for electrochemical sensing and SCs. It is believed that the present review may be useful for researchers working on Bi₂WO₆-based materials for electrochemical sensing and SC applications. Full article

Due to its persistence and potential negative effects on ecosystems and human health, microplastic pollution in aquatic environments has become a major worldwide concern. Photocatalytic degradation is a sustainable manner to degrade microplastics to non-toxic by-products. In this review, comprehensive discussion focuses on the synergistic effects of various photocatalytic materials including TiO₂, ZnO, WO₃, graphene oxide, and metal–organic frameworks for producing heterojunctions and involving multidimensional nanostructures. Such mechanisms can include the generation of reactive oxygen species and polymer chain scission, which can lead to microplastic breakdown and mineralization. The advancements of material modifications in the (nano)structure of photocatalysts, doping, and heterojunction formation methods to promote UV and visible light-driven photocatalytic activity is discussed in this paper. Reactor designs, operational parameters, and scalability for practical applications are also reviewed. Photocatalytic systems have shown a lot of development but are hampered by shortcomings which include a lack of complete mineralization and production of intermediary secondary products; variability in performance due to the fluctuation in the intensity of solar light, limited UV light, and environmental conditions such as weather and the diurnal cycle. Future research involving multifunctional, environmentally benign photocatalytic techniques—e.g., doped composites or composite-based catalysts that involve adsorption, photocatalysis, and magnetic retrieval—are proposed to focus on the mechanism of utilizing light effectively and the environmental safety, which are necessary for successful operational and industrial-scale remediation. Full article

The rational design of photoanode materials is pivotal for advancing photoelectrochemical (PEC) water splitting toward sustainable hydrogen production. This review highlights recent progress in the machine learning (ML)-assisted development of nanostructured metal oxide photoanodes, focusing on bridging materials discovery and device-level performance optimization. We first delineate the fundamental physicochemical criteria for efficient photoanodes, including suitable band alignment, visible-light absorption, charge carrier mobility, and electrochemical stability. Conventional strategies such as nanostructuring, elemental doping, and surface/interface engineering are critically evaluated. We then discuss the integration of ML techniques—ranging from high-throughput density functional theory (DFT)-based screening to experimental data-driven modeling—for accelerating the identification of promising oxides (e.g., BiVO₄, Fe₂O₃, WO₃) and optimizing key parameters such as dopant selection, morphology, and catalyst interfaces. Particular attention is given to surrogate modeling, Bayesian optimization, convolutional neural networks, and explainable AI approaches that enable closed-loop synthesis-experiment-ML frameworks. ML-assisted performance prediction and tandem device design are also addressed. Finally, current challenges in data standardization, model generalizability, and experimental validation are outlined, and future perspectives are proposed for integrating ML with automated platforms and physics-informed modeling to facilitate scalable PEC material development for clean energy applications. Full article

In response to escalating global energy demands and environmental challenges, electrochromic (EC) smart windows have emerged as a transformative technology for adaptive solar modulation. Herein, we report the rational design and fabrication of a bilayer WO₃/TiO₂ heterostructure via a synergistic two-step strategy involving the electrochemical deposition of amorphous WO₃ and the controlled hydrothermal crystallization of TiO₂. Structural and morphological analyses confirm the formation of phase-pure heterostructures with a tunable TiO₂ crystallinity governed by reaction time. The optimized WTi-5 configuration exhibits a hierarchically organized nanostructure that couples the fast ion intercalation dynamics of amorphous WO₃ with the interfacial stability and electrochemical modulation capability of crystalline TiO₂. Electrochromic characterization reveals pronounced redox activity, a high charge reversibility (98.48%), and superior coloration efficiency (128.93 cm²/C). Optical analysis confirms an exceptional transmittance modulation (ΔT = 82.16% at 600 nm) and rapid switching kinetics (coloration/bleaching times of 15.4 s and 6.2 s, respectively). A large-area EC device constructed with the WTi-5 electrode delivers durable performance, with only a 3.13% degradation over extended cycling. This study establishes interface-engineered WO₃/TiO₂ bilayers as a scalable platform for next-generation smart windows, highlighting the pivotal role of a heterostructure design in uniting a high contrast, speed, and longevity within a single EC architecture. Full article

Both tungsten trioxide (WO₃) nanosheet arrays and tungsten trioxide/zinc oxide (WO₃/ZnO) nanocomposites were grown on fluorine-doped tin oxide (FTO) coated glass slides using a hydrothermal method to develop a visible-light-driven photocatalyst with easy reusability. Field emission scanning electron microscopy (FE-SEM) observations confirmed the formation of irregular oxide nanosheet arrays on the FTO surfaces. X-ray diffraction (XRD) analysis revealed the presence of hexagonal WO₃ and wurtzite ZnO crystal phases. UV-Vis diffuse reflectance spectroscopy showed that integrating ZnO nanostructures with WO₃ nanosheets resulted in a blue shift of the absorption edge and a reduced absorption capacity in the visible-light region. Photoluminescence (PL) spectra indicated that the WO 0.5/ZnO 2.0 sample exhibited the lowest electron-hole recombination rate among the WO₃/ZnO nanocomposite sample. Photocatalytic degradation tests demonstrated that all WO₃/ZnO nanocomposite samples had higher photodegradation rates for a 10 ppm methylene blue (MB) aqueous solution under visible-light irradiation compared to pristine WO₃ nanosheet arrays. Among them, the WO 0.5/ZnO 2.0 sample showed the highest photocatalytic efficiency. Furthermore, it exhibited excellent recyclability and high photodegradation stability over three cycles. Full article

CO₂ photoreduction technology offers significant potential for addressing energy and environmental challenges, though its practical application is hindered by insufficient photo-absorption and rapid carrier recombination. Herein, we constructed the WO₃/In₂S₃ S-scheme heterojunction through hydrothermal assembly of two-dimensional WO₃ nanosheets and scale-like In₂S₃ nanoflakes. Systematic characterization via XRD, XPS, SEM, and TEM verified the successful preparation of hierarchical nanostructures with optimized interfacial contact in the WO₃/In₂S₃ composites. UV-Vis DRS analysis showed that the photo-absorption range of the catalyst was significantly widened. Photoelectrochemical investigations (EIS, TPR, PL, and LSV) revealed enhanced carrier separation efficiency and reduced recombination kinetics in the heterojunction system. The optimized WO₃/In₂S₃ (WI-60) catalyst had a CO evolution efficiency of 55.14 μmol·g⁻¹ under the UV-Vis light, representing a 3.9-fold enhancement over the pure In₂S₃ (14.08 μmol·g⁻¹). Mechanistic studies through the XPS and band-structure analysis confirmed the establishment of an S-scheme carrier’ transfer pathway, which simultaneously preserved strong redox potentials and promoted the separation process of carriers. This research provides a validated strategy for developing efficient S-scheme photocatalytic systems for solar fuel generation. Full article

WO₃ electrochromic films have emerged as potential candidates for smart windows due to their cost-effectiveness, fast switching speed, and strong chemical stability. However, the inherent contradiction between the high coloring efficiency of amorphous WO₃ and the cycling durability of crystalline WO₃ remains a critical challenge in practical applications. This study proposes an innovative heterostructure engineering strategy, achieving precise control of the amorphous/crystalline bilayer WO₃ heterointerface (148 nm a-WO₃/115 nm c-WO₃) for the first time through phase boundary regulation, using well-controlled magnetron sputtering and post-deposition thermal annealing processes. Multimodal characterization using XRD, XPS, and SEM indicates that the heterointerface optimizes performance through a dynamic charge transfer mechanism and structural synergistic effects: the optimized bilayer structure achieves 76.57% optical modulation (at 630 nm) under −1.0 V and maintains a ΔT retention rate of 45.02% after 600 cycles, significantly outperforming single amorphous (8.34%) and crystalline films (14.34%). XPS analysis reveals a dynamic equilibrium mechanism involving W⁵⁺/Li⁺ at the interface, and the Li⁺ diffusion coefficient (D₀ = 4.29 × 10⁻¹⁰ cm²/s) confirms that the amorphous layer dominates rapid ion transport, while the crystalline matrix enhances structural stability through its ordered crystalline structure. This study offers a new paradigm for balancing the efficiency and longevity of electrochromic devices, with the compatibility of magnetic sputtering promoting the industrialization process of large-area smart windows. Full article

WO₃ nanoflowers were synthesized via anodization and subsequently calcined in air at different temperatures (200–700 °C) to evaluate their photocatalytic activity. The samples were characterized in terms of their morphological, crystallite, and optical properties. Anodization produced WO₃ hydrate with a layer thickness of ~1.2 µm, which was transformed into WO₃ after heating. All samples exhibited monoclinic phase, with Raman shift intensity increasing with the calcination temperature. Some residual WO₃·H₂O was detected at certain temperatures. The calculated bandgap energy ranged from 2.49 to 2.67 eV, with higher calcination temperatures leading to lower absorbance in the UV region. The photodegradation of phenol under UV-Vis radiation reached 35% in 60 min for WO₃_700 °C, where the photocatalyst suffered a morphological transformation from a nanoflower to nanogranular structure, accompanied by increased crystallinity. Under visible light, the phenol abatement was limited, achieving 1–3% degradation. The WO₃ surface is likely negatively charged at the solution’s pH (5.6), which may explain the low phenol adsorption (~1%). Full article

In this work, WO₃/TiO₂ core–shell (C-S) nanowires (NWs) were successfully synthesized by the coaxial electrospinning method and subsequent high-temperature calcination treatment. After some microscopic structural characterizations, although the prepared WO₃–TiO₂ and TiO₂–WO₃ C-S NWs displayed quite different surface morphologies, both of the shell coatings were uniform and their typical shell thicknesses were extremely close, with mean values of 22 and 20 nm, respectively. In gas sensing tests, WO₃/TiO₂ C-S NWs exhibited good selectivity towards triethylamine (TEA) without significant interfering gases. Compared with bare WO₃ and TiO₂ NWs, WO₃/TiO₂ C-S NWs showed better gas sensing performance. Specifically, the optimal operating temperature and response of TiO₂–WO₃ C-S NWs to 100 ppm TEA were 130 °C and 106, which were reduced by 70 °C and increased by 5.73 times compared to bare WO₃, respectively. Obviously, the C-S nanostructures contributed to improving the gas sensing performance of materials towards TEA. Finally, some hypothetical sensing mechanisms were proposed, which were expected to have important reference significance for the design of target products applied to TEA sensing. Full article

Currently, semiconductor gas sensors are being actively studied and used in various fields, including ecology, industry, and medical diagnostics. One of the major challenges is to reduce their operating temperature to room temperature. To address this issue, sensor layers based on WO_3−x/WS₂ nanostructures synthesized by the hydrothermal method have been proposed. In this paper, the morphology of the material’s surface and its elemental composition were investigated, as well as the optical band gap. Additionally, changes in the resistance of the WO_3−x/WS₂ sensor layers under the influence of alcohol vapors at room temperature were analyzed. The results showed that the layers exhibited a significant response, with short response and recovery times. The achieved response value to 1000 ppm of isopropanol was 1.25, with a response time of 13 s and a recovery time of 12 s. The response to 1000 ppm of ethanol was 1.35, and the response and recovery times were 20 s. This indicates that these sensor layers have promising potential for various applications. Full article

The development of state-of-the-art gas sensors based on metal oxide semiconductors (MOS) to monitor hazardous and greenhouse gas (e.g., methane, CH₄, and carbon dioxide, CO₂) has been significantly advanced. Moreover, the morphological and topographical structures of MOSs have significantly influenced the gas sensors by means of surface catalytic activities. This work examines the impact of morphological and topological networked assembly of zinc oxide (ZnO) nanostructures, including microparticles and nanoparticles (0D), nanowires and nanorods (1D), nanodisks (2D), and hierarchical networks of tetrapods (3D). Gas sensors consisting of vertically aligned ZnO nanorods (ZnO–NR) and topologically interconnected tetrapods (T–ZnO) of varying diameter and arm thickness synthesized using aqueous phase deposition and flame transport method on interdigitated Pt electrodes are evaluated for methane detection. Smaller-diameter nanorods and tetrapod arms (nanowire-like), having higher surface-to-volume ratios with reasonable porosity, exhibit improved sensing behavior. Interestingly, when the nanorods’ diameter and interconnected tetrapod arm thickness were comparable to the width of the depletion layer, a significant increase in sensitivity (from 2 to 30) and reduction in response/recovery time (from 58 s to 5.9 s) resulted, ascribed to rapid desorption of analyte species. Additionally, nanoparticles surface-catalyzed with Pd (~50 nm) accelerated gas sensing and lowered operating temperature (from 200 °C to 50 °C) when combined with UV photoactivation. We modeled the experimental findings using a modified general formula for ZnO methane sensors derived from the catalytic chemical reaction between methane molecules and oxygen ions and considered the structural surface-to-volume ratios (S/V) and electronic depletion region width (L_d) applicable to other gas sensors (e.g., SnO₂, TiO₂, MoO₃, and WO₃). Finally, the effects of UV light excitation reducing detection temperature help to break through the bottleneck of ZnO-based materials as energy-saving chemiresistors and promote applications relevant to environmental and industrial harmful gas detection. Full article

In recent decades, nanoscience has experienced rapid global advancements due to its focus on materials and compounds at the nanoscale with high efficiency across diverse applications. WO₃ nanostructures have proven to be a unique material in the development of new technologies due to their electrical, optical, and catalytic properties. They have been used as raw materials for the fabrication of electrochromic devices, optoelectronic devices, hydrogenation catalysts, gas sensors, adsorbents, lithium-ion batteries, solar driven-catalysts, and phototherapy. One of the most striking characteristics of WO₃ is its morphological diversity, spanning from 0D to 2D, encompassing nanoparticles, nanowires, nanofibers, nanorods, nanosheets, and nanoplates. This review discusses common synthesis methods for WO₃ nanostructures, including hydrothermal and solvothermal methods, microwave-assisted synthesis, sol-gel, electrospinning, co-precipitation, and solution combustion, with emphasis on the advantages and challenges of each of them. The processes involved, the obtained morphologies, and the resulting applications are also presented. As evidenced here, the fine control of the synthesis parameters allows the production of nanostructures with controlled phase, morphology, and size, essential aspects for the production of high-performance WO₃-based devices. Full article

WO₃ and silicone rubber (SR)-based gasochromic composites were fabricated to detect hydrogen leaks at room temperature. WO₃ rod-like nanostructures were uniformly distributed in the SR matrix, with a particle size of 60–100 nm. The hydrogen permeability of these composites reached 1.77 cm³·cm/cm²·s·cm_Hg. At a 10% hydrogen concentration, the visible light reflectance of the composite decreased 49% during about 40 s, with a color change rate of 6.4% s⁻¹. Moreover, the composite detected hydrogen concentrations as low as 0.1%. And a color scale was obtained for easily assessing hydrogen concentrations in the environment based on the color of composites. Finally, the composite materials as disposable sensors underwent testing at several Sinopec hydrogen refueling stations. Full article

The present communication reports on the effect of the sprayed solution volume variation (as a thickness variation element) on the detailed Raman spectroscopy for WO₃ thin films with different thicknesses grown from precursor solutions with two different concentrations. Walls-like structured monoclinic WO₃ thin films were obtained by the spray deposition method for further integration in gas sensors. A detailed analysis of the two series of samples shows that the increase in thickness strongly affects the films’ morphology, while their crystalline structure is only slightly affected. The Raman analysis contributes to refining the structural feature clarifications. It was observed that, for 0.05 M precursor concentration series, thinner films (lower volume) show less intense peaks, indicating more defects and lower crystallinity, while thicker films (higher volume) exhibit sharper and more intense peaks, suggesting improved crystallinity and structural order. For higher precursor concentration 0.1 M series, films at higher precursor concentrations show overall more intense and sharper peaks across all thicknesses, indicating higher crystallinity and fewer defects. Differences in peak intensity and presence reflect variations in film morphology and structural properties due to increased precursor concentration. Further studies are ongoing. Full article

Contamination by pharmaceuticals adversely affects the quality of natural water, causing environmental and health concerns. In this study, target drugs (oxazepam, OZ, 17-α-ethinylestradiol, EE2, and drospirenone, DRO), which have been extensively detected in the effluents of WWTPs over the past decades, were selected. We report here a new photoactive system, operating under visible light, capable of degrading EE2, OZ and DRO in water. The photocatalytic system comprised glass spheres coated with nanostructured, solvothermally treated WO₃ that improves the ease of handling of the photocatalyst and allows for the implementation of a continuous flow process. The photocatalytic system based on solvothermal WO₃ shows much better results in terms of photocurrent generation and photocatalyst stability with respect to state-of-the-art WO₃ nanoparticles. Results herein obtained demonstrate that the proposed flow system is a promising prototype for enhanced contaminant degradation exploiting advanced oxidation processes. Full article