Search Results (34)

Nanotechnology offers innovative approaches to improve ruminant nutrition by enhancing feed efficiency, nutrient utilization, animal health, and environmental sustainability. This review highlights the use of nano-minerals, nano-encapsulated bioactives, enzyme nano-particles, and nano-sensors to optimize rumen function, digestion, and immunity. Nano-minerals provide high bioavailability at lower doses and may replace antibiotics. Encapsulated compounds like essential oils, probiotics, and vitamins improve rumen fermentation and product quality. Nanotechnology allows precise nutrient delivery through encapsulation, chelation, and nano-packaging without affecting feed sensory properties. Nano-particles are classified as inorganic, organic, or complex nano-structures and are synthesized using physical, chemical, or biological methods. While promising, nanotechnology adoption must address concerns related to safety, environmental impact, and cost. Robust risk assessments and regulatory frameworks are essential. Overall, nanotechnology represents a powerful tool for advancing sustainable and profitable ruminants, and continued multidisciplinary research is needed to fully realize its benefits and ensure its responsible application in animal agriculture. Full article

This study aimed to evaluate the effects of dietary nano-selenium (Se-NP), nano-zinc (Zn-NP), and their combination, on the performance of Ossimi ewes and their offspring. Twenty-eight pregnant Ossimi ewes were randomly allotted to one of four equal experimental groups. The ewes were fed a basal diet with the addition of 0.3 mg selenium nanoparticles (Se-NP), 30 mg zinc (Zn-NP), or 0.3 mg Se-NP plus 30 mg Zn-NP (SZ-NP)/kg DM. The results showed that nutrient digestibility, nutritive values, milk yield, and fat corrected milk, as well as milk constituents yields, were improved (p < 0.05) for ewes fed Se-NP, Zn-NP, or SZ-NP vs. the control one. As well, lambs’ birth weight, final body weight, and average daily gain were increased (p < 0.05). Serum immunoglobulin G, total protein, albumin, globulin, and glucose values were higher (p < 0.05); however, serum cholesterol level tended to be decreased. Ewes and their respective lambs in the Se-NP, Zn-NP, or SZ-NP groups had lower (p < 0.05) urea concentrations and liver enzyme activity than the control. Thyroid hormones, total antioxidant capacity, and glutathione peroxidase activity were higher (p < 0.05) in the Se-NP-, Zn-NP-, or SZ-NP-fed groups. This improvement was accompanied by favored growth performance, immune function, and overall health in their suckling lambs, with selenium being more effective than zinc. In conclusion, the dietary inclusion of selenium, zinc nanoparticles, or their combination can be an effective strategy to enhance productivity and health in ewes and their offspring. Full article

Xuanwei and the neighboring Fuyuan (XF) counties in Yunnan Province have the highest lung cancer incidence rates in China. Previous studies suggest that the nano-minerals released during the combustion of locally sourced “smoky” (bituminous) coal are the primary contributors to these elevated cancer rates. The coal ash generated during combustion predominantly consists of nano-minerals, which can be resuspended into the atmosphere during routine ash-handling activities. In this study, coal ash samples from XF counties and four additional provinces with lower lung cancer incidence rates were resuspended to simulate ash-handling activities and subsequently collected using a cascade PM_2.5 sampler. Individual particles were analyzed using a high-resolution scanning electron microscope coupled with energy-dispersive X-ray spectroscopy (SEM-EDX). Based on their morphology and elemental composition, the particles were categorized into five major types: quartz, Si- and Al-rich (SiAl-rich), Ca-rich, Ca- and Mg-rich (CaMg-rich), and Fe-rich particles. The relative abundance of crystalline quartz particles was significantly higher in Xuanwei (22.2%) and Fuyuan (13.7%) compared to the other provinces, where quartz was also detected in lower concentrations. Similarly, the proportion of Fe-rich particles was notably higher in Xuanwei (10.9%) and Fuyuan (5.1%) than in other regions. These findings highlight the potential role of quartz and Fe-rich particles in contributing to the high lung cancer rates observed in XF counties. Further research is warranted to elucidate the toxicological mechanisms underlying the health effects of these particle types. Full article

Heterogeneous Mg-Fe oxide/biochar (MgFeO@BC) nanocomposites were synthesized by a co-precipitation method and used as biochar-based catalysts to activate peroxymonosulfate (PMS) for sulfamethoxazole (SMX) removal. The optimal conditions for SMX degradation were examined as follows: pH 7.0, MgFeO@BC of 0.4 g/L, PMS concentration of 0.6 mM and SMX concentration of 10.0 mg/L at 25 ℃. In the MgFeO@BC/PMS system, the removal efficiency of SMX was 99.0% in water within 40 min under optimal conditions. In the MgFeO@BC/PMS system, the removal efficiencies of tetracycline (TC), cephalexin (CEX), ciprofloxacin (CIP), 4-chloro-3-methyl phenol (CMP) and SMX within 40 min are 95.3%, 98.4%, 98.2%, 97.5% and 99.0%, respectively. The radical quenching experiments and electron spin resonance (ESR) analysis suggested that both non-radical pathway and radical pathway advanced SMX degradation. SMX was oxidized by sulfate radicals (SO₄^•−), hydroxyl radicals (•OH) and singlet oxygen (¹O₂), and SO₄^•− acted as the main active species. MgFeO@BC exhibits a higher current density, and therefore, a higher electron migration rate and redox capacity. Due to the large number of available binding sites on the surface of MgFeO@BC and the low amount of ion leaching during the catalytic reaction, the system has good anti-interference ability and stability. Finally, the intermediates of SMX were detected. Full article

In this work, rice-husk-derived biochar (RBC) was synthesized by using simple one-step pyrolysis strategies and served as catalysts to activate peroxymonosulfate (PMS) for degrading sulfamethoxazole (SMX). When the annealing temperature (T) = 800 °C, RBC₈₀₀ exhibits the typical hardwood structure with several micropores and mesoporous. Furthermore, RBC₈₀₀ obtains more defect sites than RBC₆₀₀, RBC₇₀₀, and RBC₉₀₀. In the RBC₈₀₀/PMS system, the removal rate of the SMX reached 92.0% under optimal conditions. The kinetic reaction rate constant (k_obs) of the RBC₈₀₀/PMS system was 0.009 min⁻¹, which was about 1.50, 1.28, and 4.50 times that of the RBC₆₀₀/PMS (k_obs = 0.006 min⁻¹), RBC₇₀₀/PMS (k_obs = 0.007 min⁻¹), and RBC₉₀₀/PMS (k_obs = 0.002 min⁻¹) systems, respectively. In the RBC₈₀₀/PMS system, sulfate radical (SO₄^•−) is the main active species. Compared with other active sites, the hydroxyl group (C-OH) on the surface of RBC₈₀₀ interacts more strongly with PMS, which is more likely to promote the stretching of the O-O bond of the PMS, thus breaking into the activated state and significantly reducing the activation energy required for reaction. The degradation intermediates of SMX were speculated, and the toxicity analysis was conducted. Generally, this work reveals in depth the interaction between reactive sites of biochar-based catalysts and PMS at the molecular level. Full article

In this study, Fe, N co-doped biochar (Fe@N co-doped BC) was synthesized by the carbonization–pyrolysis method and used as a carbocatalyst to activate peroxymonosulfate (PMS) for sulfamethoxazole (SMX) removal. In the Fe@N co-doped BC/PMS system, the degradation efficiency of SMX (10.0 mg·L⁻¹) was 90.2% within 40 min under optimal conditions. Radical quenching experiments and electron spin resonance (ESR) analysis suggested that sulfate radicals (SO₄^•−), hydroxyl radicals (^•OH), and singlet oxygen (¹O₂) participated in the degradation process. After the reaction, the proportion of pyrrolic N decreased from 57.9% to 27.1%. Pyrrolic N served as an active site to break the inert carbon network structure and promote the generation of reactive oxygen species (ROS). In addition, pyrrolic N showed a stronger interaction with PMS and significantly reduced the activation energy required for the reaction (∆G = 23.54 kcal/mol). The utilization potentiality of Fe@N co-doped BC was systematically evaluated in terms of its reusability and selectivity to organics. Finally, the intermediates of SMX were also detected. Full article

The Xuanwei Formation’s claystones in the Dian-Qian District of Southwest China are rich in rare-earth elements (REEs), suggesting their potential as a source of medium and heavy rare earths. However, the REE content in these rocks is lower than other types of rare-earth deposits, and the interrelationship among clay minerals is intricate. There is no direct evidence indicating the mineralization of REEs, limiting their beneficiation and extraction. The objective of this study is the characterization of REE distribution in the Dian-Qian District. The sedimentary rocks in this district are mainly composed of kaolinite, boehmite, quartz, rutile, and pyrite. The results of continuous chemical extraction of REE-rich claystone and transmission electron microscope (TEM) observations have confirmed that REEs occurred as florencite in the rocks, and that the ion-absorption state makes only a negligible contribution to the REE content. A close relationship between florencite and kaolinite makes traditional mineral processing operations very difficult. Combined with the properties of kaolinite, roasting-acid leaching was the efficacious approach for rare-earth resources extracted from the rare earth-rich clay rocks of the Xuanwei Formation. Full article

Temperature plays a critical role in the efficiency and stability of industrial wastewater treatment plants (WWTPs). This study focuses on the effects of temperature on activated sludge (AS) communities within the A²O process of 19 industrial WWTPs in the Yangtze River Delta, a key industrial region in China. The investigation aims to understand how temperature influences AS community composition, functional assembly, and carbon transformation processes, including CO₂ emission potential. Our findings reveal that increased operating temperatures lead to a decrease in alpha diversity, simplifying community structure and increasing modularity. Dominant species become more prevalent, with significant decreases in the relative abundance of Chloroflexi and Actinobacteria, and increases in Bacteroidetes and Firmicutes. Moreover, higher temperatures enhance the overall carbon conversion potential of AS, particularly boosting CO₂ absorption in anaerobic conditions as the potential for CO₂ emission during glycolysis and TCA cycles grows and diminishes, respectively. The study highlights that temperature is a major factor affecting microbial community characteristics and CO₂ fluxes, with more pronounced effects observed in anaerobic sludge. This study provides valuable insights for maintaining stable A²O system operations, understanding carbon footprints, and improving COD removal efficiency in industrial WWTPs. Full article

Nano-minerals are employed to enhance mineral bioavailability thus promoting the growth and well-being of animals. In recent times, nano-selenium (nano-Se) has garnered significant attention within the scientific community owing to its potential advantages in the context of poultry. This study was conducted to explore the impact of using variable levels of nano-Se on the growth performance, carcass characteristics, serum constituents, and gene expression in growing Japanese quails under both thermoneutral and heat stress conditions. A randomized experimental design was used in a 2 × 3 factorial, with 2 environmental conditions (thermoneutral and heat stress) and 3 nano-Se levels (0, 0.2, and 0.5 mg/kg of diet. The findings revealed that heat stress negatively affected the growth and feed utilization of quails; indicated by the poor BWG and FCR. Additionally, oxidative stress was aggravated under heat stress condition; indicated by increased lipids peroxidation and decreased antioxidant enzymes activities. The addition of nano-Se, especially at the level of 0.2 mg/kg of diet, significantly improved the performance of heat stressed quails and restored blood oxidative status. The expression profile of inflammatory and antioxidant markers was modulated by heat stress and/or 0.2 and 0.5 nano-Se in conjunction with environmental temperature in quail groups. In comparison to the control group, the heat stress-exposed quails’ expression profiles of IL-2, IL-4, IL-6, and IL-8 showed a notable up-regulation. Significantly lower levels of the genes for IL-2, IL-4, IL-6, and IL-8 and higher levels of the genes for SOD and GPX as compared to the heat stress group demonstrated the ameliorative impact of 0.2 nano-Se. The expression profiles of IL-2, IL-4, IL-6, and IL-8 are dramatically elevated in quails exposed to 0.5 nano-Se when compared to the control group. SOD and GPX markers, on the other hand, were markedly down-regulated. It was concluded that nano-Se by low level in heat stressed growing quails provides the greatest performance and its supplementation can be considered as a protective management practice in Japanese quail diets to reduce the negative impact of heat stress. Full article

Ferromanganese (Fe-Mn) polymetallic nodules are significant marine mineral resources containing various metal elements of substantial economic and scientific research value. Previous studies have primarily focused on the mineralogy and geochemistry of the nodules, while research on their nano-mineralogy is still lacking. In this study, we conducted scanning electron microscopy (SEM), X-ray powder diffraction (XRD), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FT-IR), Brunauer–Emmett–Teller (BET) porous structure gas adsorption/desorption, and specific surface area analysis to examine the nano-mineralogy and mineralization of the polymetallic nodules from the interbasin of seamounts in the western Pacific Ocean (IBSWP). The results indicate that the growth profiles of the IBSWP polymetallic nodules exhibit microstructural features such as laminated, stromatolithic, columnar, and mottled structures. The mineral compositions are primarily composed of Fe-Mn minerals and detritus, including quartz; minerals from the feldspar group; and minerals from the clay group. The Fe-Mn phase minerals are relatively poorly crystallized. The Mn-phase minerals contain vernadite and small amounts of todorokite, buserite, and birnessite, while the Fe-phase minerals are mainly comprised of amorphous FeOOH. The main ore-forming minerals consist of nano-minerals, and the nanostructures of the polymetallic nodules endow them with unusually large specific surface areas and pore volumes, resulting in strong adsorption properties. The unique nano-properties and surface/interface adsorption effects of Fe-Mn minerals play a crucial role in controlling the enrichment of ore-forming elements. Full article

Sulfamethoxazole (SMX) is a widely used antibiotic to treat bacterial infections prevalent among humans and animals. SMX undergoes several transformation pathways in living organisms and external environments. Therefore, the development of efficient remediation methods for treating SMX and its metabolites is needed. We fabricated a photo-Fenton catalyst using an UIO-66 (Zr) metal–organic framework (MOF) dispersed in diatomite by a single-step solvothermal method for hydroxylation (HO-UIO-66). The HO-UIO-66-0/DE-assisted Fenton-like process degraded SMX with 94.7% efficiency; however, HO-UIO-66 (Zr) is not stable. We improved the stability of the catalyst by introducing a calcination step. The calcination temperature is critical to improving the catalytic efficiency of the composite (for example, designated as HO-UIO-66/DE-300 to denote hydroxylated UIO-66 dispersed in diatomite calcined at 300 °C). The degradation of SMX by HO-UIO-66/DE-300 was 93.8% in 120 min with 4 mmol/L H₂O₂ at pH 3 under visible light radiation. The O1s XPS signatures signify the stability of the catalyst after repeated use for SMX degradation. The electron spin resonance spectral data suggest the role of h⁺, •OH, •O₂⁻, and ¹O₂ in SMX degradation routes. The HO-UIO-66/DE-300-assisted Fenton-like process shows potential in degrading pharmaceutical products present in water and wastewater. Full article

Natural limonite, which contains mainly nano-sized iron and manganese oxides, is widely distributed worldwide. This study investigated the kinetics, thermodynamics, and the effects of pH, ion strength, and anions on the adsorption of Sb(III) via limonites sampled from Xinqiao and Yeshan (Tongling, China). Results show that adsorption equilibrium is achieved after 24 h for all experiments. Under initial Sb(III) = 200 mg/L, pH = 3.0, and temperature = 25 °C, Sb adsorption quantities for X1 (Mn-free limonite from Xinqiao), X2 (Mn-containing limonite from Xinqiao), Y1 (Mn-free limonite from Yeshan), and Y2 (Mn-containing limonite from Yeshan) are 10.92, 12.97, 27.12, and 89.34 mg/g, respectively. Manganese oxides in limonites promote Sb removal through oxidizing Sb(III) to Sb(V). The adsorption processes for all four limonites are fitted with a pseudo-second-order model. All adsorptions except for X1 fit with the Freundlich model; for X1, the Langmuir adsorption model is better. All adsorptions are spontaneous reactions (ΔG < 0). All adsorptions except for Y1 (ΔH < 0, exothermic reaction) are endothermic reactions (ΔH > 0). Antimony adsorption is independent of solution pH for Mn-free limonites but is negatively related to solution pH for Mn-containing limonites. Generally, ion strength has a weak positive effect on Sb adsorption. The effects of anions on Sb adsorption are grouped into three types: weak negative (NO₃⁻ and SO₄²⁻), negative (CO₃²⁻, SiO₄⁴⁻, and PO₄³⁻), and equivocal (humic acid). This study indicates that due to a much higher surface area, Yeshan (124.8 m²/g for X1 and 171.7 m²/g for X2) rather than Xinqiao (13.7 m²/g for Y1 and 12.8 m²/g for Y2) limonites are better materials for Sb(III) removal in an aqueous solution. The key factors for the better use of limonite as an Sb(III) treatment material include temperature, pH, ion strength, and Mn content. Full article

Composites made from carbon and nanominerals show great potential for thermal phase change materials, environmental water treatment, and biomass conversion. In 2019, a micro and nano-quartz-carbon ore was discovered in Feng-cheng City, Jiangxi Province. The study of the structural and physicochemical changes of quartz-carbon ore (QZC) during calcination is essential for the preparation of QZC-based composites and to broaden their application areas. Firstly, the SiO₂ crystal structure evolution of QZC during calcination was investigated using in-situ X-ray diffraction (XRD), ²⁹Si magic-angle sample spinning nuclear magnetic resonance (MAS NMR), and Fourier transform infrared FTIR spectroscopy. Then, the changes in carbon during calcination were investigated using Raman spectroscopy, ¹³C MAS NMR, and X-ray photoelectron spectroscopy (XPS). In addition, changes in the QZC morphology were observed using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques. Finally, the evolution of the physicochemical properties of QZC during calcination was revealed using thermogravimetric (TG), Brunauer–Emmet–Teller (BET), resistivity, thermal conductivity, and zeta potential techniques. Full article

Uncontrolled coal fires present a nearly unparalleled environmental and human health disaster. These fires can cause the destruction of the ecosystem, ignite forest fires, become a source of windblown dust and siltation of streams, and pollute surface water, ground water, and crops. They can cause significant disruption of families and communities resulting from physical hazards of collapse or explosion, excessive heat, visual blight and loss of potentially valuable acreage, deterioration of cultural infrastructure, personal and public property, and loss of a valuable energy resource. The emission of CO₂ and other greenhouse gases presents a significant health hazard due to respiration of dust and aerosols, and exposure to acidic gases, potentially toxic trace elements, and organic compounds. Numerous studies have described many dozens of phases that have condensed from the effluents of these fires. However, many of these studies may have overlooked the nano- and ultra-fine particles that exist beside, in, and under the brightly colored, often spectacular crystalline macro phases. Using a scanning electron microscope with an energy dispersive X-ray detector we examined a small (30 mm × 10 mm) piece of condensate from an uncontrolled coal fire in the Jharia region of India and found more than 30 different phases in this one small piece. The phases included ammonium, copper, iron, lead, bismuth chlorides; bismuth, lead, and ammonium silici-fluorides; ammonium and lead iodates; iron, barium, lead, copper, and zinc sulfides; iron and silicon oxides; and others. Broken fragments revealed multiple generations of phases. Though not strictly nanoparticles (smaller than 0.1 μm), many of these particles are in the micrometer to sub-micron range and it is likely that there are phases present in the nanoparticle size range. Certainly, particulates in the nanoparticle and ultra-fine particle range are being released from the uncontrolled coal fires and may be impacting the environment and the health of the mine workers and nearby residents, an issue that should be investigated. Full article