Search Results (389)

This study involved the fabrication of poly (vinyl alcohol) (PVA) nanocomposite films using the solution-casting process, which incorporated strontium-coated silver oxide (Sr-Ag₂O) nanoparticles generated by a plant-extract assisted method. Various characterization techniques, such as XRD, SEM, TEM, UV, and FTIR, showed the formation and uniform distribution of Sr-Ag₂O nanoparticles in the PVA film, which are biocompatible nanocomposite films. The presence of hydroxyl groups leads to appreciable mixing and interaction between the Sr-Ag₂O nanoparticles and the PVA polymer. Mechanical and thermal results suggest enhanced tensile strength and increased thermal stability. In addition, the sample of PVA/Sr-Ag₂O (1.94/0.06 wt. ratio) nanocomposite film showed decreased hydrophilicity, lower hemolysis, non-toxicity, and appreciable cell migration activity, with nearly 19.95% cell migration compared to the standard drug, and the presence of Sr-Ag₂O nanoparticles favored the adhesion and spreading of cells, which triggered the reduction in the gaps. These research findings suggest that PVA/Sr-Ag₂O nanocomposite films with good mechanical, antimicrobial, non-toxic, and biocompatible properties could be applied in biological wound-healing applications. Full article

High permeance combined with high salt/dye separation efficiency is a prerequisite for achieving zero-liquid-discharge treatment of saline textile wastewater by membrane technology. Thin-film nanocomposite (TFN) membranes incorporating porous nanoparticles offer a promising route to overcome the permeability–selectivity trade-off of conventional polymer membranes. In this study, a vacuum-assisted method was used to co-blend ZIF-67 and SiO₂ nanoparticles, while branched polyethyleneimine (PEI) served as a cross-linking bridge, resulting in a high-performance TFN membrane for salt/dye separation. Acting as a molecular connector, PEI coordinated with ZIF-67 through metal–amine complexation and simultaneously formed hydrogen bonds with surface hydroxyl groups on SiO₂, thereby linking ZIF-67 and SiO₂. The resulting membrane exhibited good hydrophilicity and excellent dye separation performance (water flux = 359.8 L m⁻² h⁻¹ bar⁻¹; Congo Red rejection = 99.2%) as well as outstanding selectivity in dye/salt mixtures (Congo Red/MgCl₂ selectivity of 1094). The optimal ZIF@SiO₂-PEI membrane maintained stable dye rejection over a wide range of trans-membrane pressures, initial concentrations, and pH values. These results reveal the huge potential of applying the ZIF@SiO₂-PEI TFN membranes for resource recovery in sustainable textile wastewater systems. Full article

This review comprehensively explores natural polymer-based materials, focusing on their characteristics, applications, and innovations across different sectors, including medicine, the environment, energy, textiles, and construction. With increasing concern about resource depletion and pollution, biomaterials offer a sustainable alternative to fossil-derived products. The review highlights polysaccharide-based and protein-based biomaterials, as well as others, such as polyisoprene, rosin, and hyaluronic acid. Emphasis is laid on their compositions and attractive characteristics, including biocompatibility, biodegradability, and functional versatility. Moreover, the review deeply discusses the ability of natural polymers to form hydrogels, aerogels, films, nanocomposites, etc., enhanced by additives for innovative applications. Future development trends of biomaterials in biomedicine, sustainable materials, environmental biotechnology, and advanced manufacturing are also explored. Their growing potential in these sectors is driven by research advances in emerging technologies such as 3D bioprinting, nanotechnology, and hybrid material innovation, which are proven to enhance the performance, functionality, and scalability of biopolymers. The review suggests several strategies, including improvement in processing techniques and material engineering to overcome limitations associated with biomaterials, thereby reinforcing their suitability and role in a circular and sustainable economy. Full article

This research focuses on creating CuO/PANI nanocomposite films by electrodepositing copper oxide nanoparticles into a polyaniline matrix on ITO substrates. The CuO nanoparticle content was adjusted between 7% and 21%. These nanocomposites are promising for various applications, such as optoelectronic devices, gas sensors, electromagnetic interference shielding, and electrochromic devices. We utilized UV-Vis spectroscopy to examine the nanocomposites’ interaction with light, allowing us to ascertain their refractive indices and absorption coefficients. The Scherrer formula facilitated the determination of the average crystallite size, shedding light on the material’s internal structure. Tauc plots indicated a reduction in the energy-band gap from 3.36 eV to 3.12 eV as the concentration of CuO nanoparticles within the PANI matrix increased, accompanied by a rise in electrical conductivity. The incorporation of CuO nanoparticles into the polyaniline matrix appears to enhance the conjugation length of PANI chains, as evidenced by shifts in the quinoid and benzenoid ring vibrations in FTIR spectra. SEM analysis indicates that the nanocomposite films possess a relatively smooth and homogeneous surface. Additionally, FTIR and XRD analyses demonstrate an increasing degree of interaction between CuO nanoparticles and PANI chains with higher CuO concentrations. At lower concentrations, interactions were minimal. In contrast, at higher concentrations, more significant interactions were observed, which facilitated the stretching of polymer chains, improved molecular packing, and facilitated the formation of larger crystalline structures within the PANI matrix. The incorporation of CuO nanoparticles resulted in nanocomposites with electrical conductivities ranging from 1.2 to 17.0 S cm⁻¹, which are favorable for optimum performance in optoelectronic devices. These results confirm that the nanocomposite films combine pronounced crystallinity, markedly enhanced electrical conductivity, and tunable band-gap energies, positioning them as versatile candidates for next-generation optoelectronic devices. Full article

Restricted by the inherent low sensitivity of materials and complex integration technology, it is difficult for existing soft actuators (s-actuators) to simultaneously possess the advantages of flexibility, fast response, and simple manufacturing, which greatly limits their practical applications. Herein, a stretchable (ε = 200%) nanocomposite film capable of deformation and motion driven by near infrared light (NIR) was developed using multi-walled carbon nanotubes (MWCNTs) as the light absorption–photothermal conversion nanonetwork, and liquid crystal polymer (LCP) as an elastic matrix featured reversible phase transition. Furthermore, s-actuators with various deformation and motion modes have been realized employing MWCNT/LCP nanocomposite film. Based on the mechanism that photothermal-effect-regulated liquid crystal–isotropic phase transition in LCP can induce macroscopic deformation of nanocomposites, MWCNT/LCP s-actuators have completed a series of complex deformation and motion tasks such as opening the knot, “V”-shape reversible deformation (30 s per cycle), the “spring” rotating and unfolding, imitating a “caterpillar” walking in a straight line (the average speed is 13 s/mm), etc. This work provides an effective strategy for the intelligent development of s-actuators. Full article

Diblock copolymers (BCP) consisting of poly(methyl methacrylate) (PMMA) and poly(1H,1H,2H,2H-perfluorodecyl methacrylate) (PsfMA) blocks are employed as templates for controlled dispersion and localization of multi-walled carbon nanotubes (MWCNT). Short MWCNT are modified with perfluoroalkyl groups to increase the compatibility between MWCNT and the semifluorinated (PsfMA) phase and to promote a defined arrangement of MWCNT in the BCP morphology. Thin BCP and BCP/MWCNT composite films are prepared by dip-coating using tetrahydrofuran as solvent with dispersed MWCNT. Atomic force microscopy, scanning and transmission electron microscopy reveal a strong tendency of the BCP to form micelle-like domains consisting of a PMMA shell and a semifluorinated PsfMA core, embedded in a soft phase, containing also semifluorinated blocks. MWCNT preferentially localized in the embedding phase outside the micelles. Perfluoroalkyl-modification leads to significant improvement in the dispersion of MWCNT, both in the polymer solution and the resulting nanocomposite film due to increased interaction of MWCNT with the semifluorinated side chains in the soft phase outside the micelle domains. As a result, reliable electrical conductivity is observed in contrast to films with non-modified MWCNT. Thus, well-dispersed, modified MWCNT provide a defined electrical conduction path at the micrometer level, which is interesting for applications in electronics and vapor sensing. Full article

Copper (Cu) nanoparticles, known for their high electrical conductivity and cost-effectiveness, have emerged as essential materials in various applications from flexible electronics to antimicrobial agents. This work focuses on the synthesis and characterization of semiconductive nanostructured films composed of polyvinyl alcohol (PVA) with embedded Cu nanoparticles. The study provides a comprehensive analysis of the structural, optical, electrical, and dielectric properties of the resulting nanocomposites. The results indicate a significant reduction in optical band gap, from 4.82 eV in pure PVA to 2.6–2.8 eV in the nanocomposites, alongside enhanced electrical conductivities reaching 1.20 S/cm for films with 5 wt.% Cu. Dielectric assessments further reveal high dielectric constants, underscoring the potential of these materials for flexible electronic applications. This work highlights the effectiveness of incorporating Cu nanoparticles into polymer matrices, paving the way for advanced materials that meet the demands of next-generation electronics. Full article

As the global plastic pollution crisis intensifies, the development of sustainable food packaging materials has become a priority. Starch-based films present a viable, biodegradable alternative to petroleum-derived plastics but face challenges such as poor moisture resistance and mechanical fragility. This review comprehensively examines state-of-the-art advancements in starch-based packaging, including polymer modifications, bio-nanocomposite incorporation, and innovative processing techniques that enhance functionality. Furthermore, the role of advanced analytical tools in elucidating the structure–performance relationships of starch films is highlighted. In particular, we provide an in-depth exploration of advanced characterization techniques, not only to assess starch-based food packaging but also to monitor starch retrogradation, including Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), nuclear magnetic resonance (NMR), and iodine binding (Blue Value). We also explore cutting-edge developments in active and intelligent packaging, where starch films are functionalized with bioactive compounds for antimicrobial protection and freshness monitoring. While substantial progress has been made, critical challenges remain in upscaling these technologies for industrial production. This review provides a roadmap for future research and the industrial adoption of starch-derived packaging solutions. Full article

To address the environmental hazards posed by oil spills and the limitations of conventional hydrocarbon monitoring techniques, a cost-effective and user-friendly gas sensor system was developed for the real-time detection and quantification of hydrocarbon contaminants in soil. This system utilizes carbon black (CB)-filled poly(methyl methacrylate) (PMMA) and poly(vinyl chloride) (PVC) nanocomposites to create chemoresistive sensors. The CB-PMMA and CB-PVC composites were synthesized and deposited as thin films onto interdigitated electrodes, with their morphologies characterized using scanning electron microscopy. The composites, optimized at a composition of 10% w/w CB and 90% w/w polymer, exhibited a sensitive response to hydrocarbon vapors across a tested range from C₂₀ (99 ppmV) to C₈ (8750 ppmV). The sensor’s response mechanism is primarily attributed to the swelling-induced resistance change of the amorphous polymer matrix in hydrocarbon vapors. These findings demonstrate the potential use of CB–polymer composites as field-deployable gas sensors, providing a rapid and efficient alternative to traditional gas chromatography methods for monitoring soil remediation efforts and mitigating the environmental impact of oil contamination. Full article

The low energy density (U_d) of polymeric dielectrics is unfavorable for the integration and miniaturization of electronics, thus limiting their application prospects. Introducing high-ε_r (dielectric constant) ceramic nanofillers to polymer matrices is the most common strategy to enhance their ε_r, and hence their U_d. By comparison, enhancing breakdown strength (E_b) is a more effective strategy to enhance U_d. Herein, 0.6BaTiO₃-0.4Bi(Mg_0.5Ti_0.5)O₃ and 0.85BaTiO₃-0.15Bi(Mg_0.5Zr_0.5)O₃ nanofibers coated with SiO₂ were utilized as fillers in PVDF-based nanocomposites. The combination of experimental and simulation results suggests that the intrinsic properties of nanofillers are the determining factor of the E_b of polymer-based nanocomposites, and SiO₂ coating and film structure design are effective strategies to enhance their E_b, and consequently their U_d. As a result, the sandwich-structured PVDF/6 wt% 0.85BaTiO₃-0.15Bi(Mg_0.5Zr_0.5)O₃@SiO₂ nanofiber within PVDF/PVDF nanocomposite films achieved a maximum U_d of 11.1 J/cm³ at an E_b of 458 MV/m, which are 2.15 and 1.40 times those of pristine PVDF, respectively. Full article

This study focused on synthesizing polyvinyl alcohol (PVA) utilizing glutaraldehyde (GA) as a crosslinking agent and silicon dioxide (SiO₂) nanopowder with titanium dioxide (TiO₂) nanopowder to reduce or prevent the hydrophilic property of PVA. Integrating SiO₂ and TiO₂ into the PVA boosted the hydrophobicity, thermal properties, and self-cleaning of the PVA film. The characteristic properties of PVA/GA, PVA/SiO₂/GA, and PVA/SiO₂/TiO₂/GA nanocomposites polymer membranes were investigated by gel content, swelling capacity, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction patterns (XRD), scanning electron microscope (SEM), thermal gravimetric analysis (TGA), and contact angle. The resulting PVA/5%SiO2/1%TiO₂/GA nanocomposite exhibits much better physical properties than PVA/GA hydrogel (water absorbency from 3.1 g/g to 0.07 g/g and contact angel from 0° to 125°). In addition, the nanocomposite retains very low swelling properties. These prepared nanocomposites are promising in a variety of applications such as sand soil stabilizers, construction, and building works where they exhibit excellent water resistance performance. This study introduces a novel approach for creating hydrophobic polymeric membranes from hydrophilic polymeric materials to stabilize sandy soil effectively. Full article

Bacterial cellulose nanocrystals (BCNCs) extracted from cellulose residues, resulting from film-cutting operations used for the commercial production of dressings, were studied as reinforcement for films based on gelatin, pectin, and hydroxypropylmethyl cellulose (HPMC). The biopolymer matrices differ in their monomer and functional group (gelatin: -COOH and -NH; pectin: -COOH and HPMC -OH). The addition of BCNCs into a polymer matrix for biopolymeric nanocomposite formulation was based on values around the theoretical percolation threshold. The results of this study showed that the BCNCs had a diameter and mean length range of (27 ± 1) nm and (180 ± 10) nm, respectively, producing films reaching 120.13 MPa of tensile strength, 10.9 GPa of Young’s modulus, and a toughness of 335.17 × 10⁶ J/m³. All films showed good transparency and a smooth surface. Surface micrographs (SEM) revealed homogeneous, compact, smooth regions, and no macropores. The crystallinity index of the BCNCs produced was 68.69%. The crystallinity of the gelatin, pectin, and HPMC films improved from 10.25 to 44.61%, from 29.79 to 53.04%, and from 18.81 to 39.88%, respectively. These results show the possibility of using films for freeze-dried food packaging. Full article

With the constantly escalating demand for safe food packaging, the utilization of biodegradable polysaccharide-based nanocomposite films is being explored as an alternative to traditional petrochemical polymer films (polyvinyl alcohol, polybutylene succinate, etc.). Polysaccharide-based films have excellent mechanical properties, water vapor transmission rates, and other physical characteristics. Films can fulfill numerous demands for fruit packaging in daily life. Additionally, they can be loaded with various types of non-toxic and non-biocidal materials such as bioactive substances and metal nanomaterials. These materials enhance bacterial inhibition and reduce oxidation in fruits while maintaining fundamental packaging functionality. The article discusses the design and preparation strategies of polysaccharide-based nanocomposite films and their application in fruit preservation. The types of films, the addition of materials, and their mechanisms of action are further discussed. In addition, this research is crucial for fruit preservation efforts and for the preparation of polysaccharide-based films in both scientific research and industrial applications. Full article

Flexible polymer-based piezoelectric nanogenerators (PENGs) have gained significant interest due to their ability to deliver clean and sustainable energy for self-powered electronics and wearable devices. Recently, the incorporation of fillers into the ferroelectric polymer matrix has been used to improve the relatively low piezoelectric properties of polymer-based PENGs. In this study, we investigated the effect of various nanofillers such as titania (TiO₂), zinc oxide (ZnO), reduced graphene oxide (rGO), and lead zirconate titanate (PZT) on the PENG performance of the nanocomposite thin films containing the nanofillers in poly(vinylidene fluoride-co-trifluoro ethylene) (P(VDF-TrFE)) matrix. The nanocomposite films were prepared by depositing molecularly thin films of P(VDF-TrFE) and nanofiller nanoparticles (NPs) spread at the air/water interface onto the indium tin oxide-coated polyethylene terephthalate (ITO-PET) substrate, and they were characterized by measuring their microstructures, crystallinity, β-phase contents, and piezoelectric coefficients (d₃₃) using SEM, FT-IR, XRD, and quasi-static meter, respectively. Multiple PENGs incorporating various nanofillers within the polymer matrix were developed by assembling thin film-coated substrates into a sandwich-like structure. Their piezoelectric properties, such as open-circuit output voltage (V_OC) and short-circuit current (I_SC), were analyzed. As a result, the PENG containing 4 wt% PZT, which was named P-PZT-4, showed the best performance of V_OC of 68.5 V with the d₃₃ value of 78.2 pC/N and β-phase content of 97%. The order of the maximum V_OC values for the PENGs of nanocomposite thin films containing various nanofillers was PZT (68.5 V) > rGO (64.0 V) > ZnO (50.9 V) > TiO₂ (48.1 V). When the best optimum PENG was integrated into a simple circuit comprising rectifiers and a capacitor, it demonstrated an excellent two-dimensional power density of 20.6 μW/cm² and an energy storage capacity of 531.4 μJ within 3 min. This piezoelectric performance of PENG with the optimized nanofiller type and content was found to be superior when it was compared with those in the literature. This PENG comprising nanocomposite thin film with optimized nanofiller type and content shows a potential application for a power source for low-powered electronics such as wearable devices. Full article

It has been well known for the past decade that the accumulation of food E-preservatives in the human body has harmful consequences for human health. Furthermore, scientists have realized that despite the convenience offered by petrochemical-derived polymers, a circular economy and sustainability are two current necessities; thus, the use of biodegradable alternative materials is imposed. The food packaging sector is one of the most rapidly changing sectors in the world. In recent years, many studies have focused on the development of active packaging films to replace old non-ecofriendly techniques with novel environmentally friendly methods. In this study, a novel self-healable, biodegradable active packaging film was developed using poly(lactic acid) (PLA) as a biopolymer, which was incorporated with a nanohybrid solid material as a natural preservative. This nanohybrid was derived via the absorption of carvacrol (CV) essential oil in an activated carbon (AC) nanocarrier. A material with a high carvacrol load of 71.3%wt. into AC via a vacuum-assisted adsorption method, functioning as a natural antioxidant and an antibacterial agent. The CV@AC nanohybrid was successfully dispersed in a PLA/triethyl citrate (TEC) matrix via melt extrusion, and a final PLA/TEC/xCV@AC nanocomposite film was developed. The study concluded that x = 10%wt. CV@AC was the optimum nanohybrid amount incorporated in the self-healable PLA/TEC and exhibited 277% higher ultimate strength and 72% higher water barrier compared to the pure PLA/TEC. Moreover, it remained ductile enough to show the slowest CV release rate, highest antioxidant activity, and significant antibacterial activity against Staphylococcus aureus and Salmonella enterica ssp. enterica serovar Typhimurium. This film extended the shelf life of fresh minced pork by four days, according to total viable count measurements, and decreased its lipid oxidation rate. Finally, this novel film preserved the nutritional value of porkby maintaining a higher heme iron content and showed a higher level of sensory characteristics compared to commercial packaging paper. Full article