Search Results (60)

Several approaches are currently being used by law enforcement to locate the remains of victims. Yet, traditional methods are invasive and time-consuming. Unmanned Aerial Vehicle (UAV)-based remote sensing has emerged as a potential tool to support the location of human remains and clandestine graves. While offering a non-invasive and low-cost alternative, UAV-based remote sensing needs to be tested and validated for forensic case work. To assess current knowledge, a systematic review of 19 peer-reviewed articles from four databases was conducted, focusing specifically on UAV-based remote sensing for human remains and clandestine grave location. The findings indicate that different sensors (colour, thermal, and multispectral cameras), were tested across a range of burial conditions and models (human and mammalian). While UAVs with imaging sensors can locate graves and decomposition-related anomalies, experimental designs from the reviewed studies lacked robustness in terms of replication and consistency across models. Trends also highlight the potential of automated detection of anomalies over manual inspection, potentially leading to improved predictive modelling. Overall, UAV-based remote sensing shows considerable promise for enhancing the efficiency of human remains and clandestine grave location, but methodological limitations must be addressed to ensure findings are relevant to real-world forensic cases. Full article

Non-invasive diagnostics play a crucial role in medicine, and they ensure both contamination safety and patient comfort. The proposed study integrates hyperspectral imaging with advanced image fusion, enabling non-invasive, diagnostic procedure within tissue. It utilizes near-infrared (NIR) wavelength vision that is suitable for reflections from objects within a dispersive layer, enabling the reconstruction of internal tissue layers images. It can detect objects, including cancerous tumors (presented as phantoms), inside human tissue. This involves processing data from multiple images taken in different NIR bands and merging them through image fusion techniques. Our research demonstrates evident data about objects within the diffusive media, visible only in the reconstructed images. The experimental results demonstrate a significant correlation with the samples employed in the study’s experimental design. Full article

Soil salinization poses a significant threat to agricultural productivity, food security, and ecological sustainability in arid and semi-arid regions. Effectively and timely mapping of different degrees of salinized soils is essential for sustainable land management and ecological restoration. Although deep learning (DL) methods have been widely employed for soil salinization extraction from remote sensing (RS) data, the integration of multi-source RS data with DL methods remains challenging due to issues such as limited data availability, speckle noise, geometric distortions, and suboptimal data fusion strategies. This study focuses on the Keriya Oasis, Xinjiang, China, utilizing RS data, including Sentinel-2 multispectral and GF-3 full-polarimetric SAR (PolSAR) images, to conduct soil salinization classification. We propose a Dual-Modal deep learning network for Soil Salinization named DMSSNet, which aims to improve the mapping accuracy of salinization soils by effectively fusing spectral and polarimetric features. DMSSNet incorporates self-attention mechanisms and a Convolutional Block Attention Module (CBAM) within a hierarchical fusion framework, enabling the model to capture both intra-modal and cross-modal dependencies and to improve spatial feature representation. Polarimetric decomposition features and spectral indices are jointly exploited to characterize diverse land surface conditions. Comprehensive field surveys and expert interpretation were employed to construct a high-quality training and validation dataset. Experimental results indicate that DMSSNet achieves an overall accuracy of 92.94%, a Kappa coefficient of 79.12%, and a macro F1-score of 86.52%, positively outperforming conventional DL models (ResUNet, SegNet, DeepLabv3+). The results confirm the superiority of attention-guided dual-branch fusion networks for distinguishing varying degrees of soil salinization across heterogeneous landscapes and highlight the value of integrating Sentinel-2 optical and GF-3 PolSAR data for complex land surface classification tasks. Full article

A majority of hyperspectral super-resolution methods aim to enhance the spatial resolution of hyperspectral imaging data (HSI) by integrating high-resolution multispectral imaging data (MSI), leveraging rich spectral information for various geospatial applications. Key challenges include spectral distortions from high-frequency spatial data, high computational complexity, and limited training data, particularly for new-generation sensors with unique noise patterns. In this contribution, we propose a novel parallel patch-wise sparse residual learning (P²SR) algorithm for resolution enhancement based on fusion of HSI and MSI. The proposed method uses multi-decomposition techniques (i.e., Independent component analysis, Non-negative matrix factorization, and 3D wavelet transforms) to extract spatial and spectral features to form a sparse dictionary. The spectral and spatial characteristics of the scene encoded in the dictionary enable reconstruction through a first-order optimization algorithm to ensure an efficient sparse representation. The final spatially enhanced HSI is reconstructed by combining the learned features from low-resolution HSI and applying an MSI-regulated guided filter to enhance spatial fidelity while minimizing artifacts. P²SR is deployable on a high-performance computing (HPC) system with parallel processing, ensuring scalability and computational efficiency for large HSI datasets. Extensive evaluations on three diverse study sites demonstrate that P²SR consistently outperforms traditional and state-of-the-art (SOA) methods in both quantitative metrics and qualitative spatial assessments. Specifically, P²SR achieved the best average PSNR (25.2100) and SAM (12.4542) scores, indicating superior spatio-spectral reconstruction contributing to sharper spatial features, reduced mixed pixels, and enhanced geological features. P²SR also achieved the best average ERGAS (8.9295) and Q2n (0.5156), which suggests better overall fidelity across all bands and perceptual accuracy with the least spectral distortions. Importantly, we show that P²SR preserves critical spectral signatures, such as Fe²⁺ absorption, and improves the detection of fine-scale environmental and geological structures. P²SR’s ability to maintain spectral fidelity while enhancing spatial detail makes it a powerful tool for high-precision remote sensing applications, including mineral mapping, land-use analysis, and environmental monitoring. Full article

Accurate cloud detection is a critical preprocessing step in remote sensing applications, as cloud and cloud shadow contamination can significantly degrade the quality of optical satellite imagery. In this paper, we propose CDWMamba, a novel dual-domain neural network that integrates the Mamba-based state space model with discrete wavelet transform (DWT) for effective cloud detection. CDWMamba adopts a four-direction Mamba module to capture long-range dependencies, while the wavelet decomposition enables multi-scale global context modeling in the frequency domain. To further enhance fine-grained spatial features, we incorporate a multi-scale depth-wise separable convolution (MDC) module for spatial detail refinement. Additionally, a spectral–spatial bottleneck (SSN) with channel-wise attention is introduced to promote inter-band information interaction across multi-spectral inputs. We evaluate our method on two benchmark datasets, L8 Biome and S2_CMC, covering diverse land cover types and environmental conditions. Experimental results demonstrate that CDWMamba achieves state-of-the-art performance across multiple metrics, significantly outperforming deep-learning-based baselines in terms of overall accuracy, mIoU, precision, and recall. Moreover, the model exhibits satisfactory performance under challenging conditions such as snow/ice and shrubland surfaces. These results verify the effectiveness of combining a state space model, frequency-domain representation, and spectral–spatial attention for cloud detection in multi-spectral remote sensing imagery. Full article

Land surface temperature (LST) is an important environmental parameter in many fields. However, many studies require high-spatial- and high-temporal-resolution LST products to improve the coarse spatial resolution of moderate-resolution imaging spectroradiometer (MODIS) LSTs. Numerous approaches have downscaled MODIS LST images to a finer spatial resolution using pixel-based image analysis (PBA). Meanwhile, object-based image analysis (OBIA) methods, which have developed rapidly in the analysis of high-spatial-resolution visible and near-infrared (VNIR) band data, have received little attention in the LST downscaling field. In this paper, we propose an object-based downscaling (OBD) method for MODIS LST using high-spatial-resolution multispectral images (e.g., Landsat Thematic Mapper (TM), Enhanced Thematic Mapper Plus (ETM+), and Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER)) as auxiliary data. The fundamental principle of this method is to preserve the thermal radiance of the “object”, which is composed of several MODIS LST pixels (partly or entirely) and is unchanged after disaggregation into subpixels in the resulting LST image. The decomposition process consists of two key parts: the thermal radiance (TR) estimation of the object from MODIS LST products and the weight calculation of sub-objects or subpixels. Objects were generated from VNIR data and remote sensing indices (e.g., the normalized difference vegetation index (NDVI), the normalized difference built-up index (NDBI), and fractions of different endmembers) using a multiscale segmentation method. The radiance of subpixels or sub-objects was calculated based on the weights of their parent objects, which were estimated by the relationships between the remote sensing indices and the LST. The accuracy and the efficiency of the OBD method were validated using a pair of ASTER and MODIS datapoints that were acquired at the same time. The decomposed LST results showed that the spatial distribution of the downscaled LST image closely resembled the true LST of the ASTER, with an RMSE of 2.5 K for the entire image. A comparison with PBA methods for pixel downscaling also indicated that the OBD method achieves the lowest root mean square error (RMSE) across different landcovers, including urban areas, water bodies, and natural terrain. Therefore, the proposed OBD method significantly enhances the capability of increasing the spatial resolution of coarse MODIS LST, providing an alternative for improving the spatial resolution of MODIS LST images and expanding their applicability to studies that require high-temporal- and high-spatial-resolution LST products. Full article

Soil salinization significantly impacts global agricultural productivity, contributing to desertification and land degradation; thus, rapid regional monitoring of soil salinization is crucial for agricultural production and sustainable management. With advancements in artificial intelligence, the efficiency and precision of deep learning classification models applied to remote sensing imagery have been demonstrated. Given the limited feature learning capability of traditional machine learning, this study introduces an innovative deep fusion U-Net model called MSA-U-Net (Multi-Source Attention U-Net) incorporating a Convolutional Block Attention Module (CBAM) within the skip connections to improve feature extraction and fusion. A salinized soil classification dataset was developed by combining spectral indices obtained from Landsat-8 Operational Land Imager (OLI) data and polarimetric scattering features extracted from RADARSAT-2 data using polarization target decomposition. To select optimal features, the Boruta algorithm was employed to rank features, selecting the top eight features to construct a multispectral (MS) dataset, a synthetic aperture radar (SAR) dataset, and an MS + SAR dataset. Furthermore, Support Vector Machine (SVM), Random Forest (RF), K-Nearest Neighbor (KNN), and deep learning methods including U-Net and MSA-U-Net were employed to identify the different degrees of salinized soil. The results indicated that the MS + SAR dataset outperformed the MS dataset, with the inclusion of the SAR band resulting in an Overall Accuracy (OA) increase of 1.94–7.77%. Moreover, the MS + SAR MSA-U-Net, in comparison to traditional machine learning methods and the baseline model, improved the OA and Kappa coefficient by 8.24% to 12.55% and 0.08 to 0.15, respectively. The results demonstrate that the MSA-U-Net outperformed traditional models, indicating the potential of integrating multi-source data with deep learning techniques for monitoring soil salinity. Full article

In satellite remote sensing, mixed pixels commonly arise in medium- and low-resolution imagery, where surface reflectance is a combination of various land cover types. The widely adopted linear mixing model enables the decomposition of mixed pixels into constituent endmembers, effectively bridging spectral resolution gaps by retrieving the spectral properties of individual land cover types. This study introduces a method to enhance multispectral surface reflectance data by reconstructing additional spectral information, particularly in the visible spectral range, using the TROPOMI BRDF product generated by the Generalized Retrieval of Atmosphere and Surface Properties (GRASP) algorithm. Employing non-negative matrix factorization (NMF), the approach extracts spectral basis vectors from reference spectral libraries and reconstructs key spectral features using a limited number of wavelength bands. The comprehensive test results show that this method is particularly effective in supplementing surface reflectance information for specific wavelengths where gas absorption is strong or atmospheric correction errors are significant, demonstrating its applicability not only within the 400–800 nm range but also across the broader spectral range of 400–2400 nm. While not a substitute for hyperspectral observations, this approach provides a cost-effective means to address spectral resolution gaps in multispectral datasets, facilitating improved surface characterization and environmental monitoring. Future research will focus on refining spectral libraries, improving reconstruction accuracy, and expanding the spectral range to enhance the applicability and robustness of the method for diverse remote sensing applications. Full article

Unmanned Aerial Vehicle (UAV) high-resolution remote sensing imagery has been used for unprecedented coastal environment monitoring with ground sampling distance and time intervals of a few centimeters and seconds, respectively. However, high spatial-time resolutions of UAV remote sensing data consist of unexpected signals from water surface level changes induced by wind-driven currents and waves. This leads to non-linear and non-stationary forms of sun and sky glints in the UAV sea surface image. Consequently, these surface glints interfere with the detection of water body reflections and objects, reducing the accuracy and usability of the measurements. This study employed Fast and Adaptive Multidimensional Empirical Mode Decomposition (FA-MEMD) to separate the spatial periodicity of time-continuous multispectral images of the sea surface from the original data and retain non-oscillatory signals called residual images. The residual images effectively represented the spatial-temporal radiance and flow variations in the water body by correcting the regions of surface glint. This study presents three key findings: First, homogeneous surface radiance data with surface glint removed from the raw image sequence was acquired using FA-MEMD. Second, the continuous surface glint removal effect is validated through water-leaving radiance (L_w-SBA) measurements obtained via the Skylight-Blocked Approach (SBA) method. Comparisons showed that R² values for the data obtained from clear water before and after surface glint removal were 0.02 and 0.56 with RMSE values of 8.37 × 10⁻⁵ and 5.51 × 10⁻⁵ W·m⁻²·sr⁻¹, respectively, indicating an improvement rate of 34.19%. Third, a comparative analysis with previous study methods demonstrated that our approach yielded spatially and temporally uniform homogeneous surface radiance data with less variability than traditional methods. The spatially and temporally synchronized residual images and the L_w-SBA data showed high similarity, confirming that the FA-MEMD technique effectively removed the surface glint from wave-induced roughness, enhancing the reliability of high-resolution UAV sea color observations. Full article

Multispectral reconstruction is an important way to acquire spectral images with a high spatial resolution as snapshots. Current deep learning-based multispectral reconstruction models perform well under symmetric conditions, where the exposure of training and testing images is consistent. However, further research has shown that these models are sensitive to exposure changes. When the exposure symmetry is not maintained and testing images are input into the multispectral reconstruction model under different exposure conditions, the reconstructed multispectral images tend to deviate from the real ground truth to varying degrees. This limitation restricts the robustness and applicability of the model in practical scenarios. To address this challenge, we propose an exposure estimation multispectral reconstruction model of EFMST++ with data augmentation and optimized deep learning architecture, where Retinex decomposition and a wavelet transform are introduced into the proposed model. Based on the currently available dataset in this field, a comprehensive comparison is made between the proposed and existing models. The results show that after the current multispectral reconstruction models are retrained using the augmented datasets, the average MRAE and RMSE of the current most advanced model of MST++ are reduced from 0.570 and 0.064 to 0.236 and 0.040, respectively. The proposed method further reduces the average MRAE and RMSE to 0.229 and 0.037, with the average PSNR increasing from 27.94 to 31.43. The proposed model supports the use of multispectral reconstruction in open environments. Full article

An effective satellite observation system is developed to retrieve the diatom concentration in freshwater ecosystems that could be utilized for understanding aquatic biogeochemical cycles. Although the singular value decomposition-based retrieval model can reflect the complicated diatom dynamics, the spatial distribution and temporal trend in diatom concentration on a large scale, as well as its driving mechanism, remain prevalently elusive. Based on the Google Earth Engine platform, this study uses Sentinel-2 MultiSpectral Instrument imagery to track the comprehensive diatom dynamics in a large reservoir, i.e., the Three Gorges Reservoir, in China during the years 2019–2023. The results indicate that a synchronous diatom distribution is found between the upstream and downstream artificial lakes along the primary tributary in the Three Gorges Reservoir, and the causal relationships between the declining diatom trend and hydrological/meteorological drivers on the monthly and yearly scales are highlighted. Moreover, the Sentinel-derived diatom concentration can be used to ascertain whether the dominant algae are harmful during bloom periods and aid in distinguishing algal blooms from ship oil spills. This study is a significant step forward in tracking the diatom dynamics in a large-scale freshwater ecosystem involving complex coupling drivers. Full article

With the development of remote sensing technology, the estimation of the chlorophyll content (CHLC) of vegetation via satellite data has become an important means of monitoring vegetation health, and high-precision estimation has been the focus of research in this field. In this study, we used larch affected by Yarl’s larch looper (Erannis jacobsoni Djak) in the boundary region of Mongolia as the research object, simulated the multispectral reflectance, downscaled Sentinel-2A satellite data, performed mixed-pixel decomposition, analyzed the potential of Sentinel-2A satellite data for estimating the chlorophyll content by calculating the spectral indices (SIs) and spectral derivatives (SDFs) of images, and then extracted sensitive spectral features as the model training set. Spectral features sensitive to the chlorophyll content were extracted to establish the training set, and, finally, the chlorophyll content estimation model for larch was constructed on the basis of the partial least squares algorithm (PLSR). The results revealed that SI and SDF based on simulated remote sensing data were highly sensitive to the chlorophyll content under the influence of pests, with the SAVI and EVI2 spectral indices as well as the D_B2 and D_B5 spectral derivatives being the most sensitive to the chlorophyll content. The estimation models based on simulated data performed significantly better than models without simulated data in terms of accuracy, especially those based on SDF-PLSR. The simulated spectral reflectance well reflected the spectral characteristics of the larch canopy and was sensitive to damaged larch, especially in the green light, red edge, and near-infrared bands. The proposed approach improves the accuracy of chlorophyll content estimation via Sentinel-2A data and enhances the ability to monitor changes in the chlorophyll content under complex forest conditions through simulations, providing new technical means and a theoretical basis for forestry pest monitoring and vegetation health management. Full article

In order to improve the accuracy of multispectral image inversion of soil and plant analytical development (SPAD) of the cotton canopy, image segmentation methods were utilized to remove the background interference, such as soil and shadow in UAV multispectral images. UAV multispectral images of cotton bud stage canopies at three different heights (30 m, 50 m, and 80 m) were acquired. Four methods, namely vegetation index thresholding (VIT), supervised classification by support vector machine (SVM), spectral mixture analysis (SMA), and multiple endmember spectral mixture analysis (MESMA), were used to segment cotton, soil, and shadows in the multispectral images of cotton. The segmented UAV multispectral images were used to extract the spectral information of the cotton canopy, and eight vegetation indices were calculated to construct the dataset. Partial least squares regression (PLSR), Random forest (FR), and support vector regression (SVR) algorithms were used to construct the inversion model of cotton SPAD. This study analyzed the effects of different image segmentation methods on the extraction accuracy of spectral information and the accuracy of SPAD modeling in the cotton canopy. The results showed that (1) The accuracy of spectral information extraction can be improved by removing background interference such as soil and shadows using four image segmentation methods. The correlation between the vegetation indices calculated from MESMA segmented images and the SPAD of the cotton canopy was improved the most; (2) At three different flight altitudes, the vegetation indices calculated by the MESMA segmentation method were used as the input variable, and the SVR model had the best accuracy in the inversion of cotton SPAD, with R² of 0.810, 0.778, and 0.697, respectively; (3) At a flight altitude of 80 m, the R² of the SVR models constructed using vegetation indices calculated from images segmented by VIT, SVM, SMA, and MESMA methods were improved by 2.2%, 5.8%, 13.7%, and 17.9%, respectively, compared to the original images. Therefore, the MESMA mixed pixel decomposition method can effectively remove soil and shadows in multispectral images, especially to provide a reference for improving the inversion accuracy of crop physiological parameters in low-resolution images with more mixed pixels. Full article

Earth observation imaging technologies, particularly multispectral sensors, produce extensive high-dimensional data over time, thus offering a wealth of information on global dynamics. These data encapsulate crucial information in essential climate variables, such as varying levels of soil moisture and temperature. However, current cutting-edge machine learning models, including deep learning ones, often overlook the treasure trove of multidimensional data, thus analyzing each variable in isolation and losing critical interconnected information. In our study, we enhance conventional convolutional neural network models, specifically those based on the embedded temporal convolutional network framework, thus transforming them into models that inherently understand and interpret multidimensional correlations and dependencies. This transformation involves recasting the existing problem as a generalized case of N-dimensional observation analysis, which is followed by deriving essential forward and backward pass equations through tensor decompositions and compounded convolutions. Consequently, we adapt integral components of established embedded temporal convolutional network models, like encoder and decoder networks, thus enabling them to process 4D spatial time series data that encompass all essential climate variables concurrently. Through the rigorous exploration of diverse model architectures and an extensive evaluation of their forecasting prowess against top-tier methods, we utilize two new, long-term essential climate variables datasets with monthly intervals extending over four decades. Our empirical scrutiny, particularly focusing on soil temperature data, unveils that the innovative high-dimensional embedded temporal convolutional network model-centric approaches markedly excel in forecasting, thus surpassing their low-dimensional counterparts, even under the most challenging conditions characterized by a notable paucity of training data. Full article

The study of ancient irrigation is crucial in the archaeological research of arid regions. It covers a wide range of topics, with the Near East being the focus for decades. However, political instability and limited data have posed challenges to these studies. The primary objective is to establish a standardised method applicable to different arid environments using the Google Earth Engine platform, considering local relief of terrain and seasonal differences in vegetation. This study integrates multispectral data from LANDSAT 5, Sentinel-2, SAR imagery from Sentinel 1, and TanDEM-X (12 m and 30 m) DSMs. Using these datasets, calculations of selected vegetation indices such as the SMTVI and NDVSI, spectral decomposition methods such as TCT and PCA, and topography-based methods such as the MSRM contribute to a comprehensive understanding of landscape irrigation. This paper investigates the influence of modern environmental conditions on the visibility of features like levees and palaeo-channels by testing different methods and parameters. This study aims to identify the most effective approach for each case study and explore the possibility of applying a consistent method across all areas. Optimal results are achieved by combining several methods, adjusting seasonal parameters, and conducting a comparative analysis of visible features. Full article