Search Results (84)

Multi-stable mechanical metamaterials based on the snap-through behavior of cosine beams have been shown to have significant potential in the field of capacity absorption due to their advantages such as reusability and structural simplicity. However, traditional multi-stable metamaterials have exhibited limitations in both energy absorption and trapping ability. Inspired by the bionic multilevel structure, a novel hierarchical multi-stable cylindrical structure (HMCS) based on cosine curved beams is proposed. We investigated the snap-through behaviors and energy absorption capacity of the HMCS. Both finite element simulation results and experimental results show that the hierarchical multi-stable structure exhibits excellent specific energy absorption and energy trapping capabilities compared to traditional multi-stable cylindrical structures (TMCSs). Furthermore, by analyzing the effect of height h and thickness t on the snap-through behavior of the structure, the key parameters determining the mono-stable or bi-stable response are identified. In addition, a gradient-based study of the structure reveals the dominant role of stiffness in the snap-through behavior of multilayer structures. This work provides insights into the application of multi-stable cylindrical structures in energy trapping and absorption and offers a new strategy for designing high-efficiency energy-absorbing metamaterials. Full article

Absorption of electromagnetic waves in a broadband frequency range with polarization insensitivity and wide incidence angles is greatly needed in modern technological applications. Many methods using metamaterials have been suggested to address this requirement; they can be complex multilayer structures or use external electronic components. In this paper, we present a plasmonic metasurface structure that was simply fabricated using the standard printed circuit board technique but provided a high absorption above 90%, also covering a broadband frequency range from 12.30 to 14.80 GHz. This plasmonic metasurface consisted of structural unit cells composed of multiple split rings connected by a copper bar. Analysis, simulation, and measurement results showed that the metasurface also showed polarization-insensitive properties and maintained an absorption above 90% at incident angles up to 45 degrees. The suggested plasmonic metasurface is a fundamental design that can also be used to design the absorber in different frequency ranges and is able to adapt well to being fabricated at various scales. Full article

We study the collective spontaneous emission of two quantum emitters (QEs) placed near a semiconductor hyperbolic metamaterial (HMM) composed of a multilayer quantum well (MQW) and doped n⁺-In_0.53Ga_0.47As. The spontaneous emissions of two identical QEs in reflection and transmission configurations are both investigated in detail. It is found that the collective spontaneous emission is strongly dependent on whether there is strong coupling in the HMM or not. In the reflection configuration, the spontaneous emission changes more intensively with the transition wavelength of QEs when strong coupling is present compared to the situation without strong coupling. In the transmission configuration, the maximum spontaneous emission decay rate of two QEs can be obtained near the HMM for the given transition wavelength. In addition, the thickness of the HMM also has an important effect on the collective spontaneous emission in the transmission configuration. The results in this work have potential applications in the field of light-emitting devices, lasers, and quantum information processing. Full article

The detection of aircraft skin is an important part of the process of aircraft design, manufacturing, and application. This paper proposes a metamaterial sensor for non-destructive detection of aircraft composite skin damage. Firstly, Using the perturbation theory, an electromagnetic nondestructive detection model of aircraft composite skin is established. Then, according to the plasmon theory, a nested multi-layer complementary split resonant ring (CSRR) metamaterial sensor is designed. Simulation using the high frequency structure simulator (HFSS), it shows that it can effectively detect defect with diameters of 2 mm and above and burial depth within 3 mm. Finally, the physical test is carried out, and the 10 mm diameter defect in the aircraft composite skin sample can be detected. Full article

Graphene oxide (GO) has emerged as a carbon-based nanomaterial providing a different pathway to graphene. One of its most notable features is the ability to partially reduce it, resulting in graphene-like sheets through the elimination of oxygen-including functional groups. In this paper, the effect of localized interactions in an Ag/GO/Au multilayer system was studied to explore its potential for photonic applications. GO was dip-coated onto magnetron-sputtered silver, followed by the deposition of a thin gold film to form an Ag/GO/Au structure. Micro-Raman Spectroscopy, SEM and Variable Angle Ellipsometry (VASE) measurements were performed on the Ag/GO/Au structure. An interesting behavior of the GO deposited on magnetron-sputtered silver with the formation of Ag nanostructures on top of the GO layer is reported. In addition to typical GO bands, Micro-Raman analysis reveals peaks such as the 1478 cm⁻¹ band, indicating a transition from sp³ to sp² hybridization, confirming the partial reduction of GO. Additionally, calculations based on effective medium theory (EMT) highlight the potential of Ag/GO structures in hyperbolic metamaterials for photonics. The medium exhibits dielectric behavior up to 323 nm, transitions to type I HMM between 323 and 400 nm and undergoes an Epsilon Near Zero and Pole (ENZP) transition at 400 nm, followed by type II HMM behavior. Full article

Metasurfaces are opening promising flexibilities to reshape the wavefront of electromagnetic waves. Notable optical phenomena are observed with the tailored surface plasmon, which is excited by metallic components in the visible spectrum. However, metamaterial or metasurface devices utilizing metallic materials encounter the challenge of low transmission efficiency, particularly within the visible spectrum. This study proposes a multilayer design strategy to enhance their transmission efficiency. By incorporating additional metal layers for improvements in the transmission efficiency and dielectric layers as spacers, cavities are formed along the propagation direction, enabling the modulation of transmittance and reflection through a process mimicking destructive interference. An analytical model simplified with the assumption of deep-subwavelength-thick metal layers is proposed to predict the structural parameters with optimized transmittance. Numerical studies employing the rigorous coupled wave analysis method confirmed that the additional metal layers significantly improve the transmittance. The introduction of the extra metal and dielectric layers enhances the transmission efficiency in specific spectral regions, maintaining a controllable passband and transmittance. The results indicate that the precise control over the layers’ thicknesses facilitates the modulation of peak-to-valley ratios and the creation of comb-like filters, which can be further refined through controlled random variation in the thickness. Furthermore, when the thickness of the silver layer followed an arithmetic sequence, a multilayer structure with a transmittance of approximately 80% covering the entire visible spectrum could be achieved. Significantly, the polarization extinction ratio and the phase delay of the incident beams could still be modulated by adjusting the geometrical structure and parameters of the multilayer metamaterial for diversified functionalities. Full article

In recent years, absorbers related to metamaterials have been heavily investigated. In particular, VO₂ materials have received focused attention, and a large number of researchers have aimed at multilayer structures. This paper presents a new concept of a three-layer simple structure with VO₂ as the base, silicon dioxide as the dielectric layer, and graphene as the top layer. When VO₂ is in the insulated state, the absorber is in the closed state, Δf = 1.18 THz (absorption greater than 0.9); when VO₂ is in the metallic state, the absorber is open, Δf = 4.4 THz (absorption greater than 0.9), with ultra-broadband absorption. As a result of the absorption mode conversion, a phenomenon occurs with this absorber, with total transmission and total reflection occurring at 2.4 THz (A = 99.45% or 0.29%) and 6.5 THz (A = 90% or 0.24%) for different modes. Due to this absorption property, the absorber is able to achieve full-transmission and full-absorption transitions at specific frequencies. The device has great potential for applications in terahertz absorption, terahertz switching, and terahertz modulation. Full article

Nowadays, metamaterial absorbers still suffer from limited bandwidth, poor bandwidth scalability, and insufficient modulation depth. In order to solve this series of problems, we propose a metamaterial absorber based on graphene, VO₂, gallium silver sulfide, and gold-silver alloy composites with dual-control modulation of temperature and electric field. Then we further investigate the optical switching performance of this absorber in this work. Our proposed metamaterial absorber has the advantages of broad absorption bandwidth, sufficient modulation depth, and good bandwidth scalability all together. Unlike the single inspired layer of previous designs, we innovatively adopted a multi-layer excitation structure, which can realize the purpose of absorption and bandwidth width regulation by a variety of means. Combined with the finite element analysis method, our proposed metamaterial absorber has excellent bandwidth scalability, which can be tuned from 2.7 THz bandwidth to 12.1 THz bandwidth by external electrothermal excitation. Meanwhile, the metamaterial absorber can also dynamically modulate the absorption from 3.8% to 99.8% at a wide incidence angle over the entire range of polarization angles, suggesting important potential applications in the field of optical switching in the terahertz range. Full article

In this study, an ultra-wideband absorber spanning from UV-B to middle-IR was designed and analyzed using a novel structure. The multilayer metamaterial, arranged from bottom to top, consisted of an Al metal layer, a lower SiO₂ layer, a graphite layer, another SiO₂ layer, a thin Ti layer, and a top SiO₂ layer. The top layer of SiO₂ had a 200 nm square cavity etched out, and then a square Ti nanopillar and a square Ti hollow outside a Ti nanopillar were embedded. This specific arrangement was chosen to maximize the absorption properties across a broad spectrum. The absorption spectrum of the designed absorber was thoroughly analyzed using the commercial finite element analysis software COMSOL Multiphysics^® (version 6.0). This analysis confirmed that the combination of these various components achieved perfect absorption and an ultra-wideband response. The synergistic interaction between the layers and the nanopillars structure contributed significantly to the absorber’s efficiency, making it a promising candidate for applications requiring broad-spectrum absorption. The comprehensive analyses of the parameters for different structures demonstrated that the effects of guided-mode resonance, coupling resonance, optical impedance matching, and propagating surface plasmon resonance existed in the investigated structure. The optimal model, determined through analyses using COMSOL Multiphysics^®, showed that the broadband absorption in the range of 270 to 3600 nm, spanning from UV-B to middle-IR, exceeded 90.0%. The average absorption rate within this range was 0.967, with the highest reaching a near-perfect absorptivity of 99.9%. We also compared three absorption spectra in this study: the t1–t6 flat structure, the t1–t5 flat structure with t6 featuring a square cavity, and the structure proposed in this study. This demonstrates that a square nanopillar and a square hollow embedded in a square cavity can enhance the absorptive properties of the absorber. Full article

This study presents a systematic optimization of wide-angle metamaterial long-pass (LP) edge filters based on silicon nanospheres (SiNP). Multi-layered configurations incorporating SiNP-meta-films and anti-reflection coating (ARC) elements not previously considered in the literature are explored to enhance their filter performance in both stop and pass bands. This research has successfully developed an accurate model for the effective refractive index using Kramers–Kronig relations, enabling the use of classical thin-film design software for rapid device performance optimization, which is verified by full-wave numerical software. This systematic optimization has produced highly efficient, near-shift-free long-pass metamaterial filters, evidenced by their high optical density (OD = 2.55) and low spectral shift across a wide angular range (0°–60°). These advancements herald the development of high-efficiency metamaterial optical components suitable for a variety of applications that require a consistent performance across diverse angles of incidence. Full article

We introduce a groundbreaking plasmonic metamaterial, the Nano-Hemisphere on Hyperbolic Metamaterial (NHoHMM), which involves the fabrication of Ag nano-hemispheres on a multilayered Ag/SiO₂ structure, achieved solely through sputtering and heat treatment. Finite Difference Time Domain (FDTD) simulations unveil the intriguing slow propagation of the localized electric field, where light travels at only 1/40th of its usual speed within this structure. These simulations reveal distinctive sharp absorption peaks in the visible spectrum, attributed to surface plasmon resonance. In practical experiments, the NHoHMM structure, characterized by random Ag nano-hemispheres, exhibits broad absorption peaks spanning the visible range, rendering it a versatile broadband optical absorber. For comparison, the optical properties of the Ag nano-hemispheres on a nanocermet (NHoNC) structure were analyzed through simultaneous sputtering of Ag and SiO₂ followed by heat treatment. Simulations employing effective medium theory and the transfer matrix method demonstrate variable optical properties dependent on the Ag filling ratio in the nanocermet structure. The results obtained differ from the spectra of the NHoHMM structure; thus, it is concluded that in the NHoHMM structure, the calculated multi-peaks are broadened due to the inhomogeneity of the nano-hemispherical structure’s size, rather than the metal/dielectric multilayer structure being altered by the heat treatment. Full article

Silicon nitride (Si₃N₄) is an ideal candidate for the development of low-loss photonic integrated circuits. However, efficient light coupling between standard optical fibers and Si₃N₄ chips remains a significant challenge. For vertical grating couplers, the lower index contrast yields a weak grating strength, which translates to long diffractive structures, limiting the coupling performance. In response to the rise of hybrid photonic platforms, the adoption of multi-layer grating arrangements has emerged as a promising strategy to enhance the performance of Si₃N₄ couplers. In this work, we present the design of high-efficiency surface grating couplers for the Si₃N₄ platform with an amorphous silicon (α-Si) overlay. The surface grating, fully formed in an α-Si waveguide layer, utilizes subwavelength grating (SWG)-engineered metamaterials, enabling simple realization through single-step patterning. This not only provides an extra degree of freedom for controlling the fiber–chip coupling but also facilitates portability to existing foundry fabrication processes. Using rigorous three-dimensional (3D) finite-difference time-domain (FDTD) simulations, a metamaterial-engineered grating coupler is designed with a coupling efficiency of −1.7 dB at an operating wavelength of 1.31 µm, with a 1 dB bandwidth of 31 nm. Our proposed design presents a novel approach to developing high-efficiency fiber–chip interfaces for the silicon nitride integration platform for a wide range of applications, including datacom and quantum photonics. Full article

Metamaterials, recognized as advanced artificial materials endowed with distinctive properties, have found diverse applications in everyday life, military endeavors, and scientific research. Starting from monolayer metamaterials, multilayer ones are increasingly researched, especially in the field of electromagnetic wave absorption. In this article, we propose a multilayer metamaterial-absorber (MA) structure comprising two resonant layers crafted with copper and FR-4 dielectric. The presented multilayer MA structure exhibited an absorption greater than 90% in a frequency range from 4.84 to 5.02 GHz, with two maximum absorption peaks at 4.89 and 4.97 GHz. The bandwidth of the multilayer MA surpassed that of the individual single-layer MAs, with extension fractions reaching 360% and 257%, respectively. Through the simulation and calculation, the field distribution and equivalent circuit model elucidated that both individual magnetic resonances and their interplay contribute significantly to the absorption behavior of the multilayer MA. The absorption of the proposed multilayer MA structure was also investigated for the oblique incidence in the transverse electric (TE) and transverse magnetic (TM) modes. In the TE mode, the absorption intensity of two maximum peaks was maintained at over 93% up to an incident angle of 40 degrees and dropped to below 80% at an incident angle of 60 degrees. In the TM mode, the absorption was more stable and not significantly affected by the incident angle, ranging from 0 to 60 degrees. An absorption greater than 97% was observed when the incident angle increased from 0 to 60 degrees in the TM mode. Additionally, the approach in our work was further demonstrated by adding more resonant layers, making 3- and 4-layer structures. The results indicated that the absorption bandwidths of the 3- and 4-layer structures increased by 16% and 33%, respectively, compared to the bilayer structure. Furthermore, we analyzed the thermal distribution within the MA to understand the dissipation of absorbed electromagnetic energy. This research offers valuable insight into the augmented MA through a multilayer structure, presenting the implications for microwave applications like electromagnetic shielding, as well as in the design of MAs for terahertz devices and technologies, including emission and thermal imaging. These findings contribute to the advancement of knowledge in enhancing the absorption capabilities across various frequency ranges, expanding the potential applications of metamaterials. Full article

Infrared polarization imaging holds significant promise for enhancing target recognition in both civil and defense applications. The Division of Focal Plane (DoFP) scheme has emerged as a leading technology in the field of infrared polarization imaging due to its compact design and absence of moving parts. However, traditional DoFP solutions primarily rely on micro-polarizer arrays, necessitating precise alignment with the focal plane array and leading to challenges in alignment and the introduction of optical crosstalk. Recent research has sought to augment the performance of infrared detectors and enable polarization and spectral selection by integrating metamaterial absorbers with the pixels of the detector. Nevertheless, the results reported so far exhibit shortcomings, including low polarization absorption rates and inadequate polarization extinction ratios. Furthermore, there is a need for a comprehensive figure of merit to systematically assess the performance of polarization-selective thermal detectors. In this study, we employ the particle swarm optimization algorithm to present a multilayer, multi-sized metamaterial absorber capable of achieving a remarkable polarization-selective absorption rate of up to 87.2% across the 8–14 μm spectral range. Moreover, we attain a polarization extinction ratio of 38.51. To elucidate and predict the resonant wavelengths of the structure, we propose a modified equivalent circuit model. Our analysis employs optical impedance matching to unveil the underlying mechanisms responsible for the high absorption. We also introduce a comprehensive figure of merit to assess the efficacy of infrared polarization detection through the integration of metamaterials with microbolometers. Finally, drawing on the proposed figure of merit, we suggest future directions for improving integrated metamaterial absorber designs, with the potential to advance practical mid-infrared polarization imaging technologies. Full article

It is known that the dielectric layer (resonator) located behind the conducting plate of the bolometer system can significantly increase its sensitivity near the resonance frequencies. In this paper, the possibility of receiving broadband electromagnetic signals in a multilayer bolometric meta-material made of alternating conducting (e.g., silicon semiconductor) and dielectric layers is demonstrated both experimentally and numerically. It is shown that such a multilayer structure acts as a lattice of resonators and can significantly increase the width of the frequency band of efficient electromagnetic energy absorption. The parameters of the dielectric and semiconductor layers determine the frequency bands. Numerical modeling of the effect has been carried out under the conditions of our experiment. The numerical results show acceptable qualitative agreement with the experimental data. This study develops the previously proposed technique of resonant absorption of electromagnetic signals in bolometric structures. Full article