Search Results (70)

To address the challenge of simultaneously achieving broadband absorption, multi-mechanism tunability, and angular stability in terahertz multifunctional devices, this paper proposes a MoS₂/VO₂ composite terahertz metamaterial absorber based on an asymmetric multi-nested C-shaped structure. The device adopts a three-layer configuration consisting of a MoS₂/VO₂ composite plane–SiO₂ dielectric–Au reflector layer. Unlike conventional symmetric structures, which are limited by selection rules and symmetry-protected dark modes that hinder the excitation of higher-order resonances, this design effectively breaks structural symmetry protection through geometric asymmetry. This induces strong mode hybridization between originally orthogonal dark and bright modes, enabling broadband high absorption exceeding 96.7% across the 1.88–3.52 THz frequency range (61% RBW). Notably, the device demonstrates synergistic tuning advantages: the macroscopic on/off switching of broadband absorption characteristics via the phase transition of VO₂, combined with fine blind-spot compensation and enhancement in absorption peaks using the electrical tunability of MoS₂. Furthermore, thanks to its sub-wavelength unit cell design, the structure maintains excellent performance stability over a wide incident angle range from 0° to 60°. This study reveals a synergistic enhancement mechanism combining the asymmetric unit cell and hybrid materials, providing a systematic physical solution for resolving the trade-off between bandwidth extension and dynamic reconfigurability. Full article

Gel-based materials are emerging as lightweight, mechanically compliant, and electromagnetically tunable platforms for next-generation antennas, electromagnetic interference (EMI) shields, microwave absorbers, and radomes. This review summarizes recent progress in hydrogel-, aerogel-, ionogel-, organohydrogel-, and xerogel-based electromagnetic materials, with emphasis on how network structure, pore architecture, solvent phase, and functional fillers regulate permittivity, conductivity, impedance matching, and attenuation. The device-level roles of gels are discussed in miniaturized and reconfigurable antennas, absorption-dominated shielding systems, broadband microwave absorbers, high-temperature wave-transparent radomes, and metamaterial, energy-harvesting, and bioelectronic systems. Particular attention is paid to the mechanisms of dipolar relaxation, ionic conduction, interfacial polarization, conduction loss, magnetic loss, and multiple scattering. Finally, key challenges are identified, including hydrogel dehydration and freezing, aerogel fragility, ionogel cost and leakage, limited long-term reliability, and the lack of standardized performance metrics. Future directions toward durable, scalable, multifunctional, and device-integrated gel-based electromagnetic materials are proposed. Full article

Low-frequency traffic noise below 500 Hz is difficult to mitigate because its long wavelengths require impractically large conventional resonators. Here, we report an active-learning-guided inverse-design approach for scalable phononic-crystal-based acoustic metamaterial resonators that simultaneously suppress low-frequency noise transmission and harvest acoustic energy. The approach combines Gaussian process regression surrogate modeling with genetic algorithm optimization to efficiently explore high-dimensional cavity geometries. By iteratively retraining the surrogate with FEM-validated designs, the active-learning process guides the search toward high-performance structures while reducing costly FEM evaluations compared with conventional GA optimization. After geometric scaling, the 2.5D prototype derived from the nine-point optimized cavity achieved a pressure amplification factor of approximately 20 near 490 Hz, while the revolved 3D cavity exhibited amplification exceeding 30 and a transmission loss of approximately 14 dB near the target frequency. Integrated with a mass-loaded five-PZT stack, the device generated 5.5 V_pp and 0.25 mW under 100 dB SPL, corresponding to a normalized power density of 0.58 μW Pa⁻² cm⁻³. These results demonstrate a route toward multifunctional piezoelectric acoustic devices for noise mitigation, localized energy harvesting, and self-powered sensing. Full article

Effective absorption in the S-band usually requires relatively thick absorbing materials. However, growing application demands necessitate the development of high-performance materials with subwavelength thickness. This study presents a broadband absorbing metamaterial for the S-band, based on a novel structural design featuring a nested hexagonal metal resonant layer integrated with a carbonyl iron powder (CIP)/charcoal (CH)/epoxy resin (ER) composite slab. This structural innovation enables exceptional S-band absorption within a subwavelength thickness, effectively overcoming the inherent physical limitations of traditional materials. By combining the arch measurement method and simulations over the 2–18 GHz, we demonstrate that the metal resonant layer of the metamaterial plays a key role in controlling the electromagnetic field vector distribution. This work investigates the mechanism for enhancing S-band absorption in metamaterials through the redistribution of electromagnetic field vectors. Additionally, magnetic loss from CIP/CH/ER and dielectric loss from the resonators further enhance absorption performance. The designed absorbing metamaterial exhibits effective absorption at a thickness of only 2.25 mm, with a reflection loss (RL) below −10 dB from 2.2 to 3.8 GHz. Simultaneously, it can maintain a radar cross-section (RCS) below −10 dBm² in a wide-angle range of ±160°. Furthermore, a superhydrophobic coating with a contact angle of 152° was prepared for absorbing metamaterial. This coating allowed the metamaterial to preserve its microwave absorption performance while imparting self-cleaning capability. This study proposes a multifunctional absorbing metamaterial for efficient absorption in the S-band. Full article

This study introduces a switchable and tunable multimodal, multi-peak, perfect terahertz absorber, utilizing a composite structure of graphene and double concentric metal rings. From bottom to top, the absorber consists of a gold substrate, a SiO₂ dielectric layer, a patterned graphene layer, another SiO₂ dielectric layer, and double concentric metal rings on the top. The structure achieves three high-absorption resonance peaks in the far-infrared band: a relatively broad peak with 99.05% absorptance at 38.128 THz, and two extremely narrow peaks with 99.56% and 97.23% absorptance at 47.909 THz and 49.873 THz, respectively. Analysis of the absorption spectra and electric field distributions reveals that the generation mechanism of Peak I is Fabry–Pérot cavity resonance, while Peaks II and III result from the coupling between the high-order localized surface plasmons in the outer ring and the graphene surface plasmon polaritons. Benefiting from graphene’s excellent electrical tunability, the absorption peaks’ positions and intensities can be dynamically tuned by varying the Fermi level. The core innovation of this work lies in the high-level integration of multiple functionalities. By leveraging the sensitive response of Peak III to variations in the Fermi level, a four-input AND logic gate is embedded within the metamaterial absorber in this frequency band. The Fermi levels of four independent graphene regions serve as the binary inputs, while the absorption state of Peak III is defined as the logical output. Additionally, the two narrow peaks display high sensitivity to the surrounding refractive index, with sensitivities of 30.1 THz/RIU and 62.5 THz/RIU, demonstrating significant potential for sensing. This multifunctional integrated device combines tunable absorption, a logic gate, and sensing capabilities, making it promising for terahertz communication systems, intelligent sensing networks, and reconfigurable platforms. Full article

To address the limitations of conventional metamaterials in thermo-mechanical coupling environments, this study proposes a multifunctional metamaterial structure through material selection and structural optimization, demonstrating stable vibration isolation performance under thermal fluctuations. The thermal deformation mechanisms and zero thermal expansion (ZTE) behavior of curved-beam unit cell are systematically examined through the chained beam constraint model (CBCM). A novel dual-zero metamaterial featuring both quasi-zero-stiffness (QZS) and ZTE characteristics is developed using curved-beam unit cell design. A parametric analysis, through finite element modeling, systematically investigated the effects of geometric parameters and material properties on the thermal expansion deformation and mechanical responses in the curved-beam unit cell structure. Furthermore, cylindrical metamaterials featuring dual-zero properties were engineered, and their deformation control mechanisms and vibration characteristic evolution across a broad temperature range were systematically studied. The simulation results indicate that while the Al–Al structure exhibits a significant resonance peak shift of up to 64.32% at 200 °C, the Al–Steel zero-stiffness design restricts this shift to only 7.72%. Furthermore, the Steel–Invar configuration demonstrates exceptional vibrational stability, with its center frequency shifting marginally from 5.58 Hz to 5.61 Hz at 200 °C. This methodology presents a viable solution for engineering metamaterials in extreme-temperature environments. Full article

Metamaterials possess unique and desirable multiphysical behaviors derived from deliberately arranging conventional materials into designed structural topologies. Multifunctional mechanical metamaterials that can both carry load and provide in situ state awareness are increasingly needed for applications such as structural health monitoring and soft robotic systems. To address the demand for multifunctional metamaterials, this study reports a scalable fabrication strategy for self-sensing lattice metamaterials by conformally dip-coating 3D-printed flexible cells with a carbon nanotube (CNT)–styrene–ethylene–butylene–styrene (SEBS) nanocomposite. Scanning electron microscopy shows that the coating conforms closely to the printed struts with well-dispersed CNT networks. The electromechanical behavior of coated Octet, Kelvin, and auxetic unit cells was characterized under quasi-static cyclic uniaxial compression (0–40% strain). All the coated structures exhibited highly stable, reversible, and repeatable piezoresistive response, with a near-linear relationship between resistance change and strain. Among the tested geometries, the auxetic unit cell achieved the highest strain sensitivity that was approximately four times that of the Octet cell and six times that of the Kelvin cell. To evaluate scalability, auxetic lattices containing eight scaled auxetic unit cells were shown to retain high sensitivity and remained statistically similar to the unit cell. This study demonstrates that the strain sensing performance of nanocomposites can be engineered through lattice topology using a simple dip-coating functionalization approach, enabling scalable self-sensing metamaterials for large-scale and conformal sensing applications. Full article

Polymer-based systems have been shown to have a particular combination of characteristics that make them desirable in technological sectors, such as lightness, insulating properties, and easy molding during processing, as well as mechanical versatility, which is greatly due to their molecular microstructure. Nevertheless, they still present limitations in mechanical performance and use at moderate/high temperatures, considerably restricting their range of applications. Thus, great efforts have been directed towards developing strategies intended to enhance said characteristics and predict their complex mechanical behavior, with the main goal of adapting their properties to the end-use application. The present review considers the most recent developments, focusing on the research published in 2025 and early 2026, and future challenges in the mechanical behavior of polymer-based materials, being structured according to material considerations, more specifically the development of advanced (nano)composites based on high-performance matrices and functional nanoparticles, as well as bio-based polymer (nano)composites obtained from renewable sources and multifunctional smart and meta-materials for monitoring and long-term use; the development of new processing methods, focusing on advanced additive manufacturing; and the use of artificial intelligence and machine learning. All in all, the final objective is generating knowledge that will enable the preparation of components with tailor-made mechanical characteristics and functional properties, covering material design and processing. Full article

Magnetic metals are of considerable importance for stealth technology and electromagnetic pollution control. However, they suffer from inherent limitations, such as the Snoek limit and narrow absorption bandwidth, which restrict their applications in complex scenarios. To address these challenges, this review systematically summarizes the recent advances of magnetic metal-based microwave-absorbing materials (MAMs), focusing on four core directions: alloy design, composite engineering, structural regulation, and preparation technology. The intensity and frequency bands of absorption in alloys are dictated by the material’s composition as well as its structural attributes. Moreover, composite systems incorporating carbon materials, MXenes, oxides, ceramics, and conductive polymers are discussed, where the synergistic design of components optimizes impedance matching and loss mechanisms. Key structural design strategies include core-shell structures, interface engineering, self-assembled hierarchical structures, and macroscopic structural design. These structures achieve the synergistic improvement of thin, lightweight, broadband, and strong absorption performance by enhancing interface polarization, multiple scattering, and resonance effects, while endowing materials with excellent environmental stability. Notably, metamaterial-based designs can further achieve an ultrawide bandwidth spanning 0.3–18 GHz. Additionally, preparation processes are crucial for regulating the microstructure and activating loss mechanisms. This review aims to offer theoretical and practical insights for developing high-performance, multifunctional magnetic MAMs. Full article

In order to break the limitation of metamaterials used in the vibration and sound reduction field, this work designed a two-dimensional metamaterial based on the re-entrant honeycomb lattice and using the fractal technique. The first, second, and third-order fractal re-entrant honeycomb metamaterials are analyzed, respectively, within the established numerical models responsible for predicting the effective Poisson’s ratio, the real band structure, and the attenuation diagram. The effects of the fractal order, fractal ratio, and geometrical characteristics on these multiple functionalities are investigated simultaneously. Through adjusting the proposed fractal metamaterials, the results show that the transformation of auxetic performance, the number and location of multiple stop bands, the attenuation level inside the stop bands, and the wave decaying directionality can be flexibly tuned. This demonstrates that the compatibility of mechanical features and wave motion characteristics is successfully achieved in the present work. It provides a theoretical and technical basis for the development of multi-functional design methods of metamaterials in solving engineering problems. Full article

Seismic metamaterial-inspired periodic foundations have emerged as promising vibration-mitigation concepts capable of attenuating seismic wave propagation within specific frequency bands. This study presents an experimental investigation on the dynamic response of periodic foundation configurations, with and without embedded piezoelectric layers, to evaluate their vibration-attenuation characteristics. The experimental program employed a shake table driven by a 0.75 kW servo motor and included excitation step counts of 3000, 4000, and 5000. Accelerometers mounted on the specimen surfaces recorded vibration data at 80 ms intervals. Three foundation configurations were tested: (i) a conventional reinforced concrete block, (ii) a one-dimensional periodic foundation composed of alternating concrete and rubber layers, and (iii) a periodic foundation incorporating piezoelectric modules. Time-domain and frequency-domain analyses showed that the periodic foundations achieved notable reductions in both peak and RMS accelerations, especially near resonance frequencies. The configuration, including piezoelectric layers, exhibited similar attenuation performance while also generating measurable instantaneous voltage outputs under vibration. However, these voltage peaks—reaching a maximum of 1.64 V—represent only a laboratory-scale, proof-of-concept demonstration of electromechanical coupling rather than a practical or continuous form of energy harvesting, given the inherently sporadic nature of seismic excitation. Overall, the results confirm that the tested system is not a full metamaterial in the classical sense but rather a metamaterial-inspired periodic arrangement capable of inducing band-gap-based vibration attenuation. The inclusion of piezoelectric elements provides auxiliary sensing and micro-energy-generation capabilities, offering a preliminary foundation for future multifunctional seismic-protection concepts. Full article

Vibration energy harvesting from ambient mechanical sources offers a sustainable alternative to batteries for powering low-power electronics in remote environments, yet challenges persist in achieving broadband efficiency, low-frequency operation, and concurrent vibration suppression. Here, we introduce a pyramidal piezoelectric sandwich beam (PPSB) with periodic elastic constraints, leveraging homogenized lattice truss cores for enhanced electromechanical coupling. Using Lagrange equations, we derive the coupled dynamics, validated against finite element simulations with resonant frequency errors below 3%. Compared to equivalent-stiffness uniform beams, the PPSB exhibits 3.42-fold higher voltage and 11.68-fold greater power output, attributed to optimized strain distribution and resonance amplification. Parametric analyses reveal trade-offs: increasing core thickness or spring stiffness elevates resonant frequencies but reduces voltage peaks due to stiffness–strain imbalances; conversely, a larger beam length, truss radius or tilt angle will reduce the natural frequency while increasing the output through inertia and shear enhancement. Piezoelectric constants and load resistance minimally affect mechanics but optimize electrical impedance matching. This single-phase, geometrically tunable design bridges gaps in multifunctional metamaterials, enabling self-powered sensors with vibration attenuation for aerospace, civil infrastructure, and biomedical applications, paving the way for energy-autonomous systems. Full article

Controlling low-frequency noise and achieving multi-band sound insulation remain significant challenges and have long been hot topics in industrial research. This study introduces a novel multifunctional device based on the principles of acoustic metamaterials, which not only offers high-performance sound insulation but also converts low-frequency acoustic energy into electrical energy. Through an innovative design featuring multiple local resonance design, the proposed device effectively mitigates the impact of pre-tension on the membrane, while enabling efficient multi-band sound insulation that can be finely tuned by adjusting structural parameters. Experimental results demonstrate that the device achieves a maximum sound insulation of 40 dB and an average sound insulation exceeding 25 dB within the 1000 Hz frequency range. Moreover, by utilizing its local resonance property, a triboelectric nanogenerator (TENG) is specifically designed for low-frequency acoustic–electric conversion, maintaining high performance low-frequency sound insulation while simultaneously powering small scale electronic devices. This work provides a promising approach for multi-band sound insulation and low-frequency acoustic–electric conversion, offering broad potential for industrial applications. Full article

This study presents an analytical investigation of the thermomechanical stability of hyperbolic doubly curved shells reinforced with graphene origami auxetic metamaterials (GOAMs) and resting on a Pasternak elastic foundation. The proposed model integrates shell geometry, thermal–mechanical loading, and architected auxetic reinforcement to capture their coupled influence on buckling behavior. Stability equations are derived using the First-Order Shear Deformation Theory (FSDT) and the principle of virtual work, while the effective thermoelastic properties of the GOAM phase are obtained through micromechanical homogenization as functions of folding angle, mass fraction, and spatial distribution. Closed-form eigenvalue solutions are achieved with Navier’s method for simply supported boundaries. The results reveal that GOAM reinforcement enhances the critical buckling load at low folding angles, whereas higher folding induces compliance that diminishes stability. The Pasternak shear layer significantly improves buckling resistance up to about 46% with pronounced effects in asymmetrically graded configurations. Compared with conventional composite shells, the proposed GOAM-reinforced shells exhibit tunable, folding-dependent stability responses. These findings highlight the potential of origami-inspired graphene metamaterials for designing lightweight, thermally stable thin-walled structures in aerospace morphing skins and multifunctional mechanical systems. Full article

This review summarizes recent advances in multifunctional metamaterials (MF-MMs) for electromagnetic (EM) wave absorption. MF-MMs overcome the key limitations of conventional absorbers—such as narrow bandwidth, limited functionality, and poor environmental adaptability—offering enhanced protection against EM security threats in radar, aerospace, and defense applications. This review focuses on an integrated structure-material-function co-design strategy, highlighting advances in three-dimensional (3D) lattice architectures, composite laminates, conformal geometries, bio-inspired topologies, and metasurfaces. When synergized with multicomponent composites, these structural innovations enable the co-regulation of impedance matching and EM loss mechanisms (dielectric, magnetic, and resistive dissipation), thereby achieving broadband absorption and enhanced multifunctionality. Key findings demonstrate that 3D lattice structures enhance mechanical load-bearing capacity by up to 935% while enabling low-frequency broadband absorption. Composite laminates achieve breakthroughs in ultra-broadband coverage (1.26–40 GHz), subwavelength thickness (<5 mm), and high flexural strength (>23 MPa). Bio-inspired topologies provide wide-incident-angle absorption with bandwidths up to 31.64 GHz. Metasurfaces facilitate multiphysics functional integration. Despite the significant potential of MF-MMs in resolving broadband stealth and multifunctional synergy challenges via EM wave absorption, their practical application is constrained by several limitations: limited dynamic tunability, incomplete multiphysics coupling mechanisms, insufficient adaptability to extreme environments, and difficulties in scalable manufacturing and reliability assurance. Future research should prioritize intelligent dynamic response, deeper integration of multiphysics functionalities, and performance optimization under extreme conditions. Full article