Search Results (621)

The growing integration of solar, wind and battery energy storage (BES) of the microgrids (MGs) has increased the necessity of real-time energy management, especially in the multi-microgrid (multi-MG) setting, where the generation and the load change stochastically. This paper presents a Java Agent DEvelopment (JADE)-based Multi-Agent System (MAS) for real-time energy management of a low-voltage hybrid multi-MG system incorporating solar photovoltaic (PV), wind generation, and battery energy storage (BES). The proposed framework’s novelty lies in its physical campus-scale hardware deployment—validated across four operating scenarios (single MG off-grid, single MG on-grid, dual MG off-grid, and dual MG on-grid)—combined with autonomous inter-MG power sharing, which distinguishes it from existing simulation-only MAS-based microgrid studies. The suggested framework facilitates decentralized communication between interconnected MGs and the utility AC grid to facilitate the proper management of power flow, its exchange, and the reliability of the system. The intelligent agents are used to coordinate solar, wind, BES, and load changes in order to adjust to changing demand conditions. The system is physically implemented on a campus rooftop with two 1 kW solar PV arrays and two 1.5 kW wind turbine generators, each paired with a 24 V, 150 Ah battery bank, operating on a 24 V DC bus. Results across 24 h real operational profiles demonstrate effective power balance maintenance, renewable energy maximization, and constraint-compliant battery operation (SOC is bounded within 20–90%). A direct comparison with a conventional centralized JavaScript-based EMS confirms equivalent dispatch accuracy while demonstrating superior scalability, fault tolerance, and modularity of the proposed JADE MAS architecture. Full article

The increasing integration of renewable energy resources into modern microgrids requires reliable scheduling methods capable of managing uncertainty, seasonal variability, operating cost, and environmental impact. This study proposes a stochastic day-ahead scheduling approach for a representative grid-connected multi-energy microgrid comprising photovoltaic generation, wind generation, a microturbine, a fuel cell, an energy storage system, and utility-grid exchange. The proposed model was implemented and simulated in a MATLAB (2024b) environment. The Birds of Prey-Based Optimization algorithm is applied to determine the optimal 24 h dispatch schedule by minimizing a weighted objective function that combines operating and emission costs. Uncertainties in solar irradiance, wind speed, electrical load, ambient temperature, and electricity prices are modeled using probabilistic distributions and Monte Carlo simulations. To improve computational efficiency, 1000 generated scenarios are reduced to 10 representative scenarios using Fast Forward Selection based on Kantorovich distance. Seasonal case studies for winter, spring, summer, and autumn are used to evaluate the proposed method. Compared with five metaheuristic algorithms, the proposed approach achieves the lowest fitness value in all seasons, with reductions of 15.2%, 26.5%, 6.8%, and 23.9%, respectively. The results confirm improved economic and environmental microgrid operation under seasonal renewable uncertainty. Full article

The large-scale integration of renewable energy and electric vehicles introduces grid-connected power fluctuations in microgrids. To address this, this paper proposes a novel two-stage optimization scheduling strategy that balances economic efficiency and grid compatibility. In the first stage, a multi-objective optimization model is formulated to minimize both operating costs and power fluctuations, and the Improved Multi-Objective Grey Wolf Optimization algorithm—incorporating the Bernoulli chaotic map—is employed to solve it efficiently. In the intra-day phase, a rolling tracking strategy based on model predictive control is proposed to address ultra-short-term forecasting errors, and a multi-unit hierarchical error compensation mechanism is designed. This mechanism prioritizes the use of supercapacitors to absorb high-frequency fluctuations, followed by the coordinated use of batteries, electric vehicle clusters, and micro gas turbines to mitigate residual deviations, thereby effectively reducing the operational burden on individual energy storage devices. Finally, a comparative analysis of six simulation cases was conducted using a weighted evaluation metric that integrates average power deviation values and interconnection line power fluctuations. The results confirm that this strategy not only significantly smooths grid-connected power fluctuations but also demonstrates exceptional robustness and adaptability under extreme forecast error scenarios. Full article

This study analyzes the impact of thermal and electrical storage solutions coupled with Photovoltaic (PV) and Concentrating Solar Power (CSP) plants, proposing an innovative model to test a Hybrid Energy Storage System (HESS). The work presents an innovative Mixed Integer Linear Programming (MILP) model to determine the optimal configuration and operational strategy of a HESS within a grid-connected Microgrid (MG). The research focuses on the synergistic integration of PV with Lithium-ion Electrical Energy Storage (EES) and CSP with Thermal Energy Storage (TES). The MG includes dynamic residential, commercial, and hospital loads. The MILP model is optimized over a 24 h horizon across four season-representative days, utilizing a multi-criteria objective function that balances economic performance and CO₂ emissions via a weighting factor ω ∈ [⁰,¹]. Three distinct CSP options such as Parabolic Trough Collectors with varying Heat Transfer Fluids (molten salt or thermal oil) and TES types (direct and indirect dual-tank, or Phase Change Material) are analyzed, each coupled with a Rankine or Organic Rankine Cycle. Key constraints address energy balances, component efficiencies, power limits, and storage dynamics. The comprehensive results identify the most suitable technology portfolio mix and optimal hour-by-hour operational rules, providing transparent decision-making criteria based on storage size, process temperatures, and specific demand profiles. Full article

High penetration of distributed photovoltaic (PV) systems has significantly increased microgrid net load volatility and uncertainty, posing challenges for conventional point forecasting methods that fail to provide sufficient operational risk information. To address this, this study proposes a multi-step net load forecasting framework that explicitly accounts for renewable energy fluctuations and system dynamics. A multi-quantile model generates 90% confidence prediction intervals for 1 and 4 h horizons at 15 min resolution. To mitigate under-coverage caused by cumulative errors, a stepwise conformal calibration strategy is applied to adjust each forecasting step independently, enhancing interval reliability and consistency. Net load volatility scenarios derived from PV ramping intensity are used to analyze uncertainty evolution under low, medium, and high fluctuation conditions. Case studies based on a high-PV microgrid dataset from eastern China demonstrate that calibrated intervals improve coverage, particularly in high-volatility scenarios, and, when integrated into rolling energy management, enhance battery state-of-charge safety margins and reduce peak grid import with minimal additional cost. The approach maintains point forecast accuracy while providing interpretable net load risk bounds, supporting informed scheduling and demand management in high-renewable microgrids. Full article

The rapid proliferation of artificial intelligence (AI) has pushed hyperscale data center rack densities beyond 100 kW, driving facility power requirements to the gigawatt scale. As developers attempt to deploy these massive Zettascale compute loads across US wholesale electricity markets, they encounter severe transmission planning bottlenecks, multi-year interconnection delays, and escalating grid transient stability risks. This paper presents a generalizable techno-economic framework for evaluating grid-tied, behind-the-meter (BTM) energy architectures as a means of bypassing these constraints. The framework is demonstrated through a detailed case study in the Electric Reliability Council of Texas (ERCOT), selected for its rapid data center growth and evolving large-load regulatory environment. Using a scenario-based comparative approach, this study models the feasibility of transitioning from pure-grid reliance to hybrid, on-site generation across a three-phase deployment pathway scaling from 25 MW to 250 MW. Six distinct microgrid configurations are evaluated, integrating baseload technologies—including Enhanced Geothermal Systems (EGSs), Small Modular Reactors (SMRs), and Reciprocating Internal Combustion Engines (RICEs)—with a tiered-performance Battery Energy Storage System (BESS) combining high C-rate lithium-ion units and repurposed electric vehicle batteries. System viability is assessed through two primary metrics: the Levelized Cost of Energy (LCOE) and the Avoided Loss of Load Probability (ALOLP). The results indicate that the blended LCOE scenario ranges from $64.50/MWh (Geothermal + Solar PPA) to $94.20/MWh (SMR-anchored), compared to a $75.00/MWh pure-grid baseline. The 100% Geothermal configuration achieves a scenario-dependent ALOLP exceeding 99.9%, while gas-dependent configurations range from 58.0% to 91.2%. These findings suggest that geographic siting co-optimized with localized generation offers a viable pathway for balancing regulatory compliance, capital cost, and Uptime Tier IV operational resilience in early-stage data center development across constrained grid environments. Full article

Scenario generation and reduction based on a single variable (e.g., photovoltaic power or load forecasting) is a mainstream approach in current power system planning. However, such methods often overlook the temporal correlation between source and load, which can compromise the credibility of the generated scenarios and lead to suboptimal planning outcomes. To address this issue, this paper proposes an integrated model for microgrid energy storage planning and operation that explicitly considers the joint distribution of source–load scenarios. First, a comprehensive similarity metric is developed by combining dynamic time warping (DTW) distance, slope distance, and source–load correlation distance. An improved K-medoids clustering algorithm is then employed to cluster the joint source–load time series, generating a set of typical scenarios that effectively preserve the coupling characteristics between photovoltaic generation and load demand. Subsequently, a bi-level optimization model is formulated, with energy storage capacity as the primary decision variable. The upper-level planning problem aims to maximize the return on investment (ROI) under energy storage investment constraints, determining the optimal capacity configuration. The lower-level operational problem maximizes the daily net revenue by optimizing the charging and discharging strategies of the energy storage system. Through iterative interaction between the two levels, the model achieves optimal coordination between investment decisions and economic dispatch. Case studies on a campus microgrid demonstrate that the proposed joint scenario generation method effectively captures the temporal correlation between source and load, enhancing both the credibility of the scenarios and the economic rationality of the integrated planning and operation framework. Full article

This paper presents a unified, data-driven optimization framework for the planning and operation of an arbitrary number N of grid-connected microgrids connected to a distribution feeder. Each microgrid is represented as a controllable energy entity comprising local loads, battery energy storage systems (BESS) modeled through their State of Energy (SOE), and optional local generation. The microgrids are embedded explicitly in a radial distribution network subject to hosting-capacity and ramp-rate constraints at the point of common coupling (PCC). Unlike many existing studies that rely on synthetic or stylized demand profiles, this work employs real, open-access hourly load data from the Electricity Load Measurements and Analysis (ELMAS) dataset (France) to construct heterogeneous residential, commercial, and industrial microgrid instances. A plug-and-play integration rule is formulated at the planning level: the connection of an additional microgrid is admissible if and only if the enlarged optimization problem remains feasible and all reliability, network, and safety-oriented constraints are satisfied. The deterministic formulation is extended to handle uncertainty via scenario-based stochastic modeling of load variability. A comprehensive case study based on real French load profiles illustrates how feeder hosting capacity can be quantified in terms of the maximum number of microgrids that can be safely integrated. The results demonstrate that coordinated planning significantly improves PCC behavior, reduces operational stress, and provides a clear quantitative criterion for plug-and-play microgrid integration in distribution networks. Full article

As the global response to climate change and energy crises accelerates, the large-scale integration of heterogeneous distributed energy resources (DERs) is rapidly transforming traditional passive distribution networks into active distribution networks. However, the massive quantity and high stochasticity of these underlying devices trigger a severe “curse of dimensionality,” creating significant computational and communication bottlenecks for coordinated system dispatch. To overcome these challenges, the “clustering followed by equivalence” aggregation modeling paradigm has emerged as a critical technical pathway. This paper reviews the state-of-the-art clustering and aggregation methodologies for distribution networks with high DER penetration. The review begins by synthesizing multi-dimensional feature extraction techniques and cutting-edge clustering algorithms that establish the foundation for dimensionality reduction. It then delves into refined aggregation models tailored to heterogeneous resources, including dynamic data-driven equivalence for renewable generation, Minkowski sum-based boundary approximations for energy storage, and thermodynamic alongside Markov chain mapping methods for flexible loads. Building upon these models, the paper comprehensively discusses the practical applications of generalized aggregators, such as microgrids and virtual power plants, in feasible region error evaluation, coordinated network control, multi-agent market games, and privacy-preserving architectures. Finally, the review outlines future research trajectories, emphasizing hybrid data-model-driven architectures for real-time dispatch, distributionally robust optimization (DRO) for enhancing grid resilience and self-healing, and decentralized trading ecosystems to ensure equitable system-level surplus allocation. This review aims to provide a systematic theoretical reference for the coordinated management and aggregated trading of flexibility resources in novel power systems. Full article

This paper offers a critical review of cutting-edge research on multi-energy microgrids (MEMs), with a novel exploration of their potential role in supporting urban air mobility (UAM), specifically electric vertical takeoff and landing (eVTOL) aircraft. While extensive research has focused on improving the economic performance and emission reductions of MEMs, particularly in the context of electric vehicle (EV) charging, there remains a significant gap in understanding how microgrids can support the decarbonization of UAM. The paper examines the opportunities and challenges of integrating microgrids with UAM operations, highlighting the need for more research to optimize energy management systems that balance renewable energy use with the growing demand for aerial transport. Thermal energy storage systems are emphasized as a critical component for addressing transportation energy needs, offering a promising solution to reduce carbon emissions while enhancing system efficiency. This review aims to provide new insights into how the coupling of microgrids and UAM can contribute to the development of economically and environmentally sustainable smart cities. Full article

The global energy transition toward decarbonization and digitalization is profoundly reshaping modern power systems. Smart grids and microgrids have become core enabling technologies for accommodating high-penetration renewable energy, facilitating flexible source–load interaction, and enhancing system efficiency, reliability, and resilience. Based on the Special Issue “Advances in Smart Grids and Microgrids: Distributed Generation and Energy Storage Systems” and recent state-of-the-art progress, this paper systematically reviews key research advances in four core areas: planning and design paradigms, operation optimization and control under uncertainty, economic and market mechanism design, and resilience and cyber–physical security. Emphasis is placed on the synergistic optimization between distributed renewable generation and advanced energy storage (ES) systems in both single-energy and multi-energy architectures. Typical applications in urban areas, remote islands, and hardware-in-the-loop validation are summarized. Furthermore, major challenges and future trends are highlighted, including cross-scale interoperability, resilient control, cyber–physical security, advanced ES, electricity–carbon integrated markets, and so on. It is demonstrated that the transition from deterministic centralized frameworks to stochastic distributed multi-energy integrated systems has become an inevitable trend, and interdisciplinary collaboration will further promote the development of clean, resilient, cost-effective, and equitable smart grids and microgrids. Full article

This paper proposes a collaborative optimal scheduling strategy based on asymmetric Nash bargaining for the integrated electricity–heat–hydrogen multi-microgrid system, which can minimize the overall system operation cost while guaranteeing the dynamic fairness of multi-microgrids energy transactions with full consideration of wind–solar uncertainty. First, a scenario generation method based on temporally correlated Latin hypercube sampling and Wasserstein probability distance-based scenario reduction is adopted to construct representative wind–solar uncertainty scenarios, which effectively mitigates the operational risks arising from wind and solar power output fluctuations in the coordinated dispatch of multi-microgrids. Then, an asymmetric Nash bargaining-based cooperative game model for energy trading is established, with each microgrid’s optimal independent operation cost as the negotiation breakdown point. The alternating direction method of multipliers is used for a distributed solution to obtain the optimal scheme that balances total system cost and trading fairness. Simulation results verify that the proposed strategy can effectively suppress operation risks from renewable uncertainty, significantly cut total system cost by 36.85%, and fully ensure trading fairness among multi-microgrid entities, with favorable engineering application value. Full article

Decentralized sustainable microgrids are emerging as a promising approach for addressing the increasing complexity of modern power systems while ensuring reliable and efficient operation. A fundamental driver of this transition is the partitioning of distribution networks into self-sufficient microgrids supported by the effective integration of Distributed Energy Resources (DERs) and Energy Storage Systems (ESSs), enabling improved power flow management and enhanced voltage stability. In this regard, this paper proposes a tri-stage optimization framework designed to segment power distribution systems into multiple self-sustaining microgrids while maintaining optimal network performance. In the first stage, the distribution grid is partitioned into microgrid clusters based on electrical distance metrics and bus correlation analysis. The second stage focuses on the optimal sizing and operational management of DERs and ESSs within each identified microgrid to ensure energy self-sufficiency and minimize greenhouse gas (GHG) emissions. In the third stage, an optimal resource allocation strategy is implemented, where the resources determined in the previous stage are optimally placed within the distribution network to achieve optimal power flow, reduce system losses, and maintain voltage stability under worst-case operating conditions. The proposed framework is validated using the IEEE 33-bus test system. Simulation results demonstrate its effectiveness in multi-microgrid classification, coordinated planning, and resource allocation, highlighting its superiority in enhancing system performance and resilience. Full article

This study presents a comprehensive and systematic integrative review of Neighborhood-Level Energy Hubs (NLEHs) as pivotal enablers of sustainable and resilient urban energy systems. In response to accelerating climate pressures, rapid urbanization, and the decentralization of energy production, NLEHs are conceptualized as multi-carrier platforms that enable coordinated energy generation, storage, conversion, and exchange at the neighborhood scale. Utilizing a PRISMA-informed methodology to synthesize 125 core studies, the review systematically evaluates recent advances across five interconnected dimensions: conceptual foundations, system typologies, energy flow architectures, urban integration, and optimization paradigms. Unlike conventional reviews, this study explicitly bridges the critical gap between techno-economic optimization and socio-environmental priorities. A key novelty is the proposed mathematical integration of energy justice and Social Life Cycle Assessment (S-LCA) directly into optimization algorithms (e.g., MILP and MPC) as dynamic constraints and penalty terms. Particular emphasis is placed on participatory governance models, lifecycle sustainability metrics, and digitalization tools such as AI-driven energy management systems and urban digital twins. The analysis further reveals critical research gaps, highlighting a stark geographic dichotomy between high-tech, market-driven NLEHs in the Global North and resilience-oriented hybrid microgrids in the Global South, alongside the lack of adaptive regulatory frameworks. By proposing a unified Cyber–Physical–Social perspective, this study provides actionable insights for planners, policymakers, and researchers to support the development of scalable, inclusive, and context-sensitive NLEH implementations. Ultimately, the paper contributes to redefining neighborhood-scale energy systems as not only efficient and low-carbon infrastructures, but also as socially equitable, globally scalable, and institutionally adaptive components of future smart cities. Full article

With the widespread adoption of electric vehicles (EVs), the deep integration of transportation and power grids has emerged as a significant trend. EV charging stations, acting as dynamic loads, present challenges to real-time power balance and economic dispatch in microgrids, while EVs serving as mobile energy storage units offer new opportunities for system flexibility. To address these issues, this paper proposes a hardware-in-the-loop (HIL) co-design method for vehicle–grid-integrated microgrid energy management systems, covering the entire workflow from simulation to embedded deployment. This method resolves the core challenges of multi-objective optimization algorithm deployment on embedded platforms (i.e., high computational complexity, strict real-time constraints, and heterogeneous communication protocol integration) via deployability analysis, hybrid code generation, real-time task restructuring, and consistency validation. A prototype microgrid system integrating photovoltaic panels, wind turbines, diesel generators, an energy storage system, and EV charging loads was built on the RK3588 embedded platform. An improved multi-objective particle swarm optimization (MOPSO) algorithm is employed to optimize operational costs. Experimental results verify the effectiveness of the proposed co-design method. Compared with traditional rule-based control strategies, the MOPSO algorithm reduces the total daily operating cost of the VGIM system by approximately 50%. After integrating vehicle-to-grid (V2G) scheduling, the operating cost is further reduced. In addition, this method ensures the consistency of algorithm functionality and performance during the migration from HIL simulation to embedded deployment, and the RK3588-based embedded system can complete a single optimization iteration within 60 s, which fully satisfies the real-time requirements of industrial applications. This work provides a feasible technical pathway for the reliable deployment of vehicle–grid-integrated microgrids in practical industrial scenarios. Full article