Search Results (526)

This review investigates recent developments in cardiac mechano-electrical-fluid interaction (MEFI) modeling, with a focus on multiphysics simulation platforms and digital twin frameworks developed between 2015 and 2025. The purpose of the study is to assess how computational modeling methods—particularly finite element and immersed boundary techniques, monolithic and partitioned coupling schemes, and artificial intelligence (AI)-enhanced surrogate modeling—capture the integrated dynamics of cardiac electrophysiology, tissue mechanics, and hemodynamics. The goal is to evaluate the translational potential of MEFI models in clinical applications such as cardiac resynchronization therapy (CRT), arrhythmia classification, atrial fibrillation ablation, and surgical planning. Quantitative results from the literature demonstrate <5% error in pressure–volume loop predictions, >0.90 F1 scores in machine-learning-based arrhythmia detection, and <10% deviation in myocardial strain relative to MRI-based ground truth. These findings highlight both the promise and limitations of current MEFI approaches. While recent advances improve physiological fidelity and predictive accuracy, key challenges remain in achieving multiscale integration, model validation across diverse populations, and real-time clinical applicability. The review concludes by identifying future milestones for clinical translation, including regulatory model certification, standardization of validation protocols, and integration of patient-specific digital twins into electronic health record (EHR) systems. Full article

XSPICE models for a generic transmission line, a microstrip line, and coupled microstrips are presented. The developed models extend general-purpose circuit simulation tools using RF circuits design features. The models could be used for circuit simulation in frequency, DC, and time domains for any active or passive RF or microwave schematic (including microwave monolithic integrated circuits—MMICs) involving transmission lines. The presented models could be used with any circuit simulation backend supporting XSPICE extensions and could be integrated without patching the core simulator code. The presented XSPICE models for microstrip lines take into account the frequency dependency of characteristic impedance and dispersion. The models were designed using open-source circuit simulation software. This study provides a practical example of the low-noise RF amplifier (LNA) design with Ngspice simulation backend using the proposed models. Full article

Background and Clinical Significance: The retreatment of failed dental implants remains a challenging clinical scenario, particularly when complicated by peri-implantitis and as sociated bone loss. Successful management requires a comprehensive and predictable approach that addresses both hard and soft tissue deficiencies. Case Presentation: This case report illustrates a fully digital, prosthetically driven workflow for the rehabilitation of a posterior mandibular site following implant failure. A 44-year-old female patient underwent removal of a failing implant and adjacent tooth due to advanced peri-implantitis and periodontitis. After healing, a digital workflow—including intraoral scanning, cone-beam computed tomography (CBCT), and virtual planning—was employed to design and fabricate a customized CAD/CAM titanium mesh for vertical guided bone regeneration. The grafting procedure utilized a composite mixture of autogenous bone and anorganic bovine bone (A-Oss). After nine months of healing, two implants with a hydrophilic surface (SOI) were placed using a fully guided surgical protocol (OneGuide system). Subsequent soft tissue grafting and final prosthetic rehabilitation with monolithic zirconia restorations resulted in stable functional and aesthetic outcomes. Conclusions: This case highlights how the integration of modern digital technologies with advanced regenerative procedures and innovative implant surfaces can enhance the predictability and long-term success of implant retreatment in compromised posterior sites. Full article

The monolithic integration of III-V semiconductors with silicon (Si) is a critical step toward advancing optoelectronic and photonic devices. In this work, we present GaAs nanoheteroepitaxy (NHE) on Si nanotips using gas-source molecular beam epitaxy (GS-MBE). We discuss the selective growth of fully relaxed GaAs nanoislands on complementary metal oxide semiconductor (CMOS)-compatible Si(001) nanotip wafers. Nanotip wafers were fabricated using a state-of-the-art 0.13 μm SiGe Bipolar CMOS pilot line on 200 mm wafers. Our investigation focuses on understanding the influence of the growth conditions on the morphology, crystalline structure, and defect formation of the GaAs islands. The morphological, structural, and optical properties of the GaAs islands were characterized using scanning electron microscopy, high-resolution X-ray diffraction, and photoluminescence spectroscopy. For samples with less deposition, the GaAs islands exhibit a monomodal size distribution, with an average effective diameter ranging between 100 and 280 nm. These islands display four distinct facet orientations corresponding to the {001} planes. As the deposition increases, larger islands with multiple crystallographic facets emerge, accompanied by a transition from a monomodal to a bimodal growth mode. Single twinning is observed in all samples. However, with increasing deposition, not only a bimodal size distribution occurs, but also the volume fraction of the twinned material increases significantly. These findings shed light on the growth dynamics of nanoheteroepitaxial GaAs and contribute to ongoing efforts toward CMOS-compatible Si-based nanophotonic technologies. Full article

This paper presents a 17–38 GHz wideband low-noise amplifier (LNA) designed in a 150-nm GaAs pHEMT process. The proposed amplifier adopts a cascode topology with an interstage inductor between the common-source (CS) and common-gate (CG) stages, and a series inductor at the source node of the CS stage for source degeneration. By incorporating these inductors in the amplification stage, simultaneous noise and input matching is facilitated, while achieving flat gain characteristics over a broad frequency range and ensuring stability. In addition, the amplification stage with inductors achieves input matching using only a shunt component in the DC bias path, without any series matching elements. This approach allows the amplifier to achieve simultaneous noise and input matching (SNIM), ensuring low-noise performance over a wide bandwidth. The simulation results show a flat gain of 20–23 dB and a low noise figure of 1.1–2.1 dB over the 17–38 GHz band. Full article

Metasurface display, a kind of unique imaging technique with subwavelength scale, plays a key role in data storage, information processing, and optical imaging due to the superior performance of high resolution, miniaturization, and integration. Recent works about grayscale imaging as a typical metasurface display have showcased an excellent performance for optical integrated devices in the near field. However, chiral grayscale imaging has been rarely elucidated, especially using a single structure. Here, a novel method is proposed to display a continuously chiral grayscale imaging that is adjusted by a metasurface consisting of a single chiral structure with optimized geometric parameters. The simulation results show that the incident light can be nearly converted into its cross-polarized reflection when the chiral structural variable parameters are α = 80° and β = 45°. The versatile metasurface can arbitrarily and independently realize the spin-selective manipulation of wavelength and amplitude of circularly polarized light. Due to the excellent manipulation ability of the versatile metasurface, a kind of circularly polarized light detection and a two-channel encoded display with different operating wavelengths are presented. More importantly, this versatile metasurface can also be used to show high-resolution chiral grayscale imaging, which distinguishes it from the results of previous grayscale imaging studies about linearly polarized incident illumination. The proposed versatile metasurface of spin-selective manipulation, with the advantages of high resolution, large capacity, and monolithic integration, provides a novel way for polarization detection, optical display, information storage, and other relevant fields. Full article

Purpose: The aim of this study was to compare the effect of rotary (air-driven, electric-driven) and oscillating (piezoelectric ultrasonic) handpieces on the quality of crown preparation, marginal integrity, and internal adaptation of monolithic zirconia crowns. Materials and Methods: Seventy-two standardized premolar preparations were performed using the air-driven handpiece with a guide pin-ended tapered fissure diamond bur on a modified dental surveyor. The finishing process utilized three handpiece types (n = 24/group) with fine/superfine diamond burs under controlled force with a fixed number of rotations and controlled advancement time. Marginal/internal adaptation was evaluated via the triple-scan technique; defects (marginal, axial, and occlusal) were quantified based on predefined criteria through the inspection of the Standard Tessellation Language (STL) file. Results: One-way ANOVA with Tukey HSD and Kruskal–Wallis with Dunn–Bonferroni tests were utilized. The marginal gap showed no significant differences (p > 0.05, η² = 0.04). The electric handpiece outperformed the ultrasonic (p = 0.023, η² = 0.105) in internal adaptation, while the air-driven showed no differences (p > 0.05). The ultrasonic handpiece produced fewer marginal defects than the air-driven (p = 0.039, ε² = 0.132), but more axial defects (median 9 vs. 6, p = 0.014, ε² = 0.168) than the electric handpiece and occlusal defects (5 vs. 3, 4 p = 0.007, p = 0.015, ε² = 0.227) than rotary handpieces. The air-driven handpiece exhibited comparable defect numbers to the electric handpiece without statistical significance (p > 0.05). Conclusions: Handpiece selection had a small effect on marginal adaptation but more pronounced effects on overall defect formations and internal adaptation. The ultrasonic handpiece’s decreased marginal defects but variable axial/occlusal results reveal technological constraints, whereas rotary handpieces’ consistency reflects their operator-dependent nature. Full article

Background and Objectives: Conventional methods for removing cemented fixed prosthetic restorations (FPRs) are unreliable and lead to unsatisfactory outcomes. At their best, they allow the tooth to be saved at the expense of a laborious process that also wears down rotating tools and handpieces and occasionally results in abutment fractures. Restorations are nearly never reusable in any of these situations. Erbium-doped yttrium-aluminum-garnet (Er:YAG) and erbium-chromium yttrium-scandium-gallium-garnet (Er,Cr:YSGG) lasers casafely and effectively remove FPRs, according to scientific studiesre. This study sets out to examine the impact of Er:YAG laser radiation on the debonding of different ceramic restorations, comparing the behavior of various ceramic prosthetic restoration types under laser radiation action and evaluating the integrity of prosthetic restorations and dental surfaces exposed to laser radiation. Materials and Methods: The study included a total of 16 removed teeth, each prepared on opposite surfaces as abutments.y. Based on the previously defined groups, four types of ceramic restorations were included in the study: feldspathic (F), lithium disilicates (LD), layered zirconia (LZ), and monolithic zirconia (MZ). The thickness of the prosthetic restorations was measured at three points, and two different materials were used for cementation. The Er:YAG Fotona StarWalker MaQX laser was used to debond the ceramic FPR at a distance of 10 mm using an R14 sapphire tip with 275 mJ, 20 Hz, 5.5 W, with air cooling (setting 1 of 9) and water. After debonding, the debonded surface was visualized under electron microscopy. Results: A total of 23 ceramic FPRs were debonded, of which 12 were intact and the others fractured into two or three pieces. The electron microscopy images showed that debonding took place without causing any harm to the tooth structure. The various restoration types had the following success rates: 100% for the LZ and F groups, 87% for the LD group, and 0% for the MZ group. In terms of cement type, debonding ceramic FPRs cemented with RELYX was successful 75% of the time, compared to Variolink DC’s 69% success rate. Conclusions: In summary, the majority of ceramic prosthetic restorations can be successfully and conservatively debonded with Er:YAG radiation. Full article

Piezoelectric energy harvesting in roadways can power distributed sensors and electronics by capturing underutilized mechanical energy from traffic. In this research, 1-3 stacked piezocomposites were developed and evaluated to determine optimal designs for multiple applications. The design of these transducers aimed at operating in a multitude of scenarios, under compressive loads (1–10 kN) at low-frequency (10 Hz) applications, intended to simulate vehicular forces. Power comparison was utilized between numerous transducers to determine the most efficient configuration for electromechanical energy conversion. Design guidelines were based on mechanical integrity, output power, active piezoelectric volume percentage, aspect ratio, and geometric factors. The forces applied in this study were reliant on the average vehicle weight. An intermediate PZT volume fraction and moderate pillar aspect ratios were found to yield the highest power output, with the stacked 1-3 composite significantly outperforming a monolithic PZT of a similar size. Full article

In integrated crop–livestock systems (ICLSs), grazing intensity and crop rotation influence residue dynamics, making it essential to assess shoot and root contributions to soil carbon (C) and nitrogen (N) inputs. This study aimed to assess the shoot and root biomass of Italian ryegrass, soybean, and maize; the distribution of roots within the soil profile; and the contributions of shoot and root biomass to soil C and N under varying winter grazing intensities and summer crop rotations. The experiment was conducted within a long-term (12-year) field protocol, arranged in a randomized complete block design with split plots and four replicates. Grazing intensity was defined as the following: (i) moderate grazing—forage allowance equivalent to 2.5 times the potential dry matter intake of sheep, and (ii) low grazing—forage allowance equivalent to 5.0 times the intake potential. Grazing intensities (moderate and low) were allocated to the main plots, while cropping systems—monoculture (soybean/soybean) and crop rotation (soybean/maize)—were assigned to the subplots. Soil depth layers (0–10, 10–20, 20–30, and 30–40 cm) were treated as sub-subplots. Root samples of Italian ryegrass, soybean, and maize were collected using the soil monolith method. Low grazing intensity (8.6 Mg ha⁻¹) promoted greater aboveground biomass production of Italian ryegrass compared to moderate intensity (6.6 Mg ha⁻¹). Maize exhibited a higher capacity for both root and shoot biomass accumulation, with average increases of 85% and 120%, respectively, compared to soybean. Root biomass was primarily concentrated in the surface soil layer, with over 70% located within the top 10 cm. Italian ryegrass showed a more uniform root distribution throughout the soil profile compared to soybean and maize. Carbon inputs were higher under crop rotation (17.2 Mg ha⁻¹) than under monoculture (15.0 Mg ha⁻¹), whereas nitrogen inputs were greater in soybean monoculture (0.23 Mg ha⁻¹) than in crop rotation (0.16 Mg ha⁻¹). Low grazing intensity in winter and summer crop rotation with high-residue and quality species enhance the balance between productivity and soil C and N inputs, promoting the sustainability of ICLSs. Full article

We present THz direct detectors based on an AlGaN/GaN high electron mobility transistor (HEMT), featuring excellent optical sensitivity and low noise-equivalent power (NEP). These detectors are monolithically integrated with various antenna designs and exhibit state-of-the-art performance at room temperature. Their architecture enables straightforward scaling to two-dimensional formats, paving the way for terahertz focal plane arrays (FPAs). In particular, for one detector type, a fully realized THz FPA has been demonstrated in this paper. Theoretical and experimental characterizations are provided for both single-pixel detectors (0.1–1.5 THz) and the FPA (0.1–1.1 THz). The broadband single detectors achieve optical sensitivities exceeding 20 mA/W up to 1 THz and NEP values below 100 pW/$\sqrt{\mathrm{Hz}}$. The best optical NEP is below 10 pW/$\sqrt{\mathrm{Hz}}$ at 175 GHz. The reported sensitivity and NEP values were achieved including antenna and optical coupling losses, underlining the excellent overall performance of the detectors. Full article

Data integration (DI) and semantic interoperability (SI) are critical in healthcare, enabling seamless, patient-centric data sharing across systems to meet the demand for instant, unambiguous access to health information. Federated information systems (FIS) highlight auspicious issues for seamless DI and SI stemming from diverse data sources or models. We present a hybrid ontology-based design science research engineering (ODSRE) methodology that combines design science activities with ontology engineering principles to address the above-mentioned issues. The ODSRE constructs a systematic mechanism leveraging the Ontop virtual paradigm to establish a state-of-the-art federated virtual knowledge graph framework (FVKG) embedded virtualized knowledge graph approach to mitigate the aforementioned challenges effectively. The proposed FVKG helps construct a virtualized data federation leveraging the Ontop semantic query engine that effectively resolves data bottlenecks. Using a virtualized technique, the FVKG helps to reduce data migration, ensures low latency and dynamic freshness, and facilitates real-time access while upholding integrity and coherence throughout the federation system. As a result, we suggest a customized framework for constructing ontological monolithic semantic artifacts, especially in FIS. The proposed FVKG incorporates ontology-based data access (OBDA) to build a monolithic virtualized repository that integrates various ontological-driven artifacts and ensures semantic alignments using schema mapping techniques. Full article

In this research work, two distinct types of three-dimensional (3D) capacitors were successfully fabricated, each with its own unique features and advantages. The first type of capacitor is centered around a 3D nanoporous structure. This structure is formed on a nickel substrate through anodic oxidation. After undergoing high-temperature thermal oxidation, a monolithic Ni-NiO-Pt metal–insulator–metal (MIM) capacitor with a nanoporous dielectric architecture is achieved. Structurally, this innovative design brings about several remarkable benefits. Due to the nanoporous structure, it has a significantly increased surface area, which can effectively store more charges. As a result, it exhibits an equivalent capacitance density of 69.95 nF/cm², which is approximately 18 times higher than that of its planar, non-porous counterpart. This high capacitance density enables it to store more electrical energy in a given volume, making it highly suitable for applications where miniaturization and high energy storage in a small space is crucial. The second type of capacitor makes use of Through-Glass Via (TGV) technology. This technology is employed to create an interdigitated blind-via array within a glass substrate, attaining an impressively high aspect ratio of 22.5:1 (with a via diameter of 20 μm and a depth of 450 μm). By integrating atomic layer deposition (ALD), a conformal interdigital electrode structure is realized. Glass, as a key material in this capacitor, has outstanding insulating properties. This characteristic endows the capacitor with a high breakdown field strength exceeding 8.2 MV/cm, corresponding to a withstand voltage of 5000 V. High breakdown field strength and withstand voltage mean that the capacitor can handle high-voltage applications without breaking down easily, which is essential for power-intensive systems like high-voltage power supplies and some high-power pulse-generating equipment. Moreover, due to the low-loss property of glass, the capacitor can achieve an energy conversion efficiency of up to 95%. Such a high energy conversion efficiency ensures that less energy is wasted during the charge–discharge process, which is highly beneficial for energy-saving applications and systems that require high-efficiency energy utilization. Full article

The integration of new technologies across scientific disciplines, including rock slope engineering, is increasingly essential. The use of drones and advanced software tools for mapping and analyzing large rocky slopes in detail has become indispensable and highly beneficial. In this context, this paper examines the process and key parameters involved in generating a high-resolution 3D terrain model and evaluating rock-mass stability using advanced software tools (UgCS version 5.5.0, ArcGIS version 3.4.3, Drone2Map version 2024.2.1, DSE version 3.02, and Rocfall3D version 1.014). These technologies facilitate the identification of hazard zones on rocky slopes in monuments of archaeological interest. The evaluation of this modeling approach is conducted at the monolithic rock of Ancient Corinth (Acrocorinth), one of Greece’s most significant archaeological sites. This study focuses on assessing its vulnerability to rockfalls and identifying hazard zones. This methodology involves the development of a 3D rockfall analysis system and the implementation of a specialized hazard matrix for the quantitative assessment of rockfall risk. This approach enables the development of a decisive model for mitigating rockfall hazards, ensuring the safety of visitors in high-traffic areas such as major archaeological sites. Full article

Technological evolution has driven the integration of computing devices in various domains, giving rise to heterogeneous and dynamic intelligent environments; together with market pressure, these pose challenges in formulating an architecture that takes advantage of contextual knowledge. In terms of architectural design, we are witnessing a transition from a centralised, monolithic view of systems to a decentralised view that incorporates the vertical and horizontal dimensions of the production environment. Therefore, this review aimed to (i) identify the requirements, (ii) find out about the representation models and context inference techniques, and (iii) identify architectural technologies, norms, models, and standards. The results observed in 25 articles made it possible to identify interoperability, automation, and decision-making as convergence points and observe the adoption of ontologies as a research area for context representation. In contrast, the discussion of context inference techniques remains open. Finally, this study presents recommendations for the design of a context-aware systems architecture that incorporates the principles of Industry 4.0 and facilitates the development of applications. Full article