Search Results (664)

Objective: This study aimed to evaluate the mean age of eruption of permanent teeth and their clinical emergence sequence in a longitudinal sample of children from a multi-ethnic urban population. Methods: A total of 854 children (413 females and 441 males), aged between 4 and 13 years, were examined annually for a minimum of 4 consecutive years, as part of their annual dental screening appointment. The presence of permanent teeth was recorded at each examination. Mean and median ages, with standard deviations, of individual tooth eruption were calculated, in addition to the eruption sequence, and the analysis of the data was performed using the lognormal distribution model. Regarding the error of the method, two examiners reviewed all relevant dental screening forms, and any discrepancies were resolved through consultation with the senior author. Results: The sequence of permanent tooth eruption followed a consistent pattern across sexes, with distinct differences between the maxillary and mandibular arches. In the maxilla, eruption began with the first molar, while in the mandible, it started with the central incisor. Mandibular teeth generally erupted earlier than maxillary teeth, with girls experiencing earlier eruption than boys, with some exceptions, and prolonged eruption periods. No statistically significant differences were found in the timing of eruption between contralateral homologous teeth. Conclusions: Based on the present data, the observed sequence of tooth eruption in a multi-ethnic urban population showed similar patterns across sexes. Mandibular teeth generally erupt earlier than maxillary teeth, with girls experiencing earlier eruption than boys. Full article

Background/Objectives: The expansion of National Health Insurance (NHI) coverage for dental implants in South Korea has substantially increased implant placements among older adults. While implants offer functional and esthetic benefits, their lack of periodontal ligaments alters occlusal force distribution, potentially increasing biomechanical stress on adjacent or opposing teeth. This study aimed to investigate the association between the increased number of dental implants and the incidence of cracked teeth following the introduction of implant insurance. Methods: A retrospective analysis was conducted using the Clinical Data Warehouse of Seoul St. Mary’s Dental Hospital. Patients who underwent molar crown restorations between 2014 and 2022 were included. The incidence and clinical features of cracked teeth were compared before (2014–2015) and after (2016–2022) the introduction of implant insurance. Statistical analyses assessed differences in symptom presentation, pulp status, and treatment outcomes. Results: Among 5044 molars restored with crowns, 1692 were diagnosed with cracks. The incidence of cracked teeth significantly increased after NHI coverage for implants (25.5% vs. 32.6%, p < 0.001). Cases after insurance implementation showed fewer signs and symptoms at initial presentation (67.4% vs. 50.0%, p < 0.001), reduced irreversible pulpitis (37.2% vs. 25.8%, p < 0.001), and increased preservation of pulp vitality (46.9% vs. 57.8%, p < 0.001). These shifts may reflect changes in occlusal adjustment practices and earlier clinical intervention. Conclusions: The findings suggest a temporal link between increased implant placement and the rising incidence of cracked teeth. Implant-induced occlusal changes may contribute to this trend. Careful occlusal evaluation and follow-up are essential after implant placement, and further prospective studies are warranted to confirm causality and refine prevention strategies. Full article

Primary teeth play a crucial role in a child’s development, particularly in maintaining space for permanent teeth. The premature loss of a primary tooth can lead to orthodontic issues, making the use of space maintainers essential to ensure proper growth and development of permanent teeth. To preserve space, the fabrication of a space maintainer is necessary. Since conventional space maintainers do not restore masticatory function, this study presents an innovative solution for space preservation following the extraction of the first primary molar through the design of the functional space maintainer KOS&MET (Key Orthodontic System and Materials Enhanced Therapy). The space maintainer was designed using the 3Shape Dental Designer 2023 version software tool and manufactured via additive 3D printing, utilizing a metal alloy with high resistance to masticatory forces. The crown is supported by the primary canine, while an intraoral window is created to monitor the eruption of the successor tooth. This design does not interfere with occlusion and enables bilateral chewing. Masticatory performance was assessed using two-color chewing gum, and the results showed improvement after cementing the space maintainer. This innovative approach not only preserves space for permanent teeth but also enhances masticatory function, contributing to the proper growth and development of the jaws and teeth. Full article

Introduction: Dental caries and molar–incisor hypomineralisation (MIH) are prevalent conditions affecting children’s oral health, with functional, aesthetic, and psychosocial implications. In Spain, previous studies have highlighted geographic and sociodemographic disparities in their distribution, particularly among rural and migrant populations. Objective: To characterise oral health status, in terms of caries and MIH, among 6–7-year-old children from the towns of Palos de la Frontera, Mazagón, and San Bartolomé. Methods: A cross-sectional study was conducted involving 229 children recruited from public primary schools. Sociodemographic, anthropometric, and behavioural data were collected through clinical examination and interview. Statistical analysis included univariate and multivariate logistic regression. The study protocol was approved by the Ethics Committee of Huelva. Results: The prevalence of caries (DMFT ≥ 1) was 53.3%, with mean DMFT and dft indices of 1.78 and 0.31, respectively. MIH affected 32.8% of the cohort, with a predominance in the first permanent molars (teeth 36 and 26). Multivariate analysis identified independent predictors of caries: African (OR = 7.47; 95% CI: 2.84–23.8) and European (OR = 4.56; 95% CI: 1.26–22.3) parental origin, poor oral hygiene (OR = 3.07; 95% CI: 1.60–6.03), and the presence of MIH (OR = 3.20; 95% CI: 1.64–6.42). The municipality of San Bartolomé was associated with a higher risk of MIH (OR = 2.90; 95% CI: 1.21–7.45). Conclusions: The high prevalence of caries and MIH in the Condado-Campiña district, exceeding national averages, reflects oral health inequities linked to social determinants (migrant origin, locality) and clinical factors (MIH, oral hygiene). Targeted preventive interventions are urgently needed in high-risk populations, including culturally tailored education and policies ensuring equitable access to dental care services. Full article

This study aims to evaluate the feasibility and accuracy of 3D printing-guided endodontics in the maxillary teeth of dogs. CT data from a Beagle dog were processed to create a 3D model of the maxilla, and virtual root canal pathways were established using SOLIDWORKS software (version 29.0.0.5028). Guided endodontic templates were 3D printed and tested in vitro on 20 maxillary teeth (excluding the third molars), with 36 root canals treated using both guided and conventional methods. Results indicated that 3D printing-guided endodontics provided accurate root canal pathways, with minimal deviations in length (average 3.08 ± 1.75%) and angular alignment (average 2.06° ± 0.5°) compared to conventional methods. This research represents a significant step forward in the application of 3D printing technology in veterinary endodontics, offering a promising alternative to traditional methods for treating complex dental conditions in dogs. Full article

Background: Dental eruption pathways could be influenced by several factors, both general and local, with different prevalence and morbidity. This study aims to report our experience of pediatric impacted teeth due to local factors, with the exclusion of the third molars, illustrating their prevalence, diagnostic and therapeutic pathways, and treatment outcomes. Methods: The inclusion criteria were minor age (<18 years) and the presence of impacted teeth due to a local cause, excluding wisdom teeth. The complete diagnostic and therapeutic procedures and their outcomes were described. The relationship between the treatment and the outcomes was assessed with a chi-square test. Results: One hundred twelve patients with a single impaction were included in the study. The local causes of single impaction were: 63 odontogenic cysts (57%), 24 supernumerary teeth (21%), 17 odontogenic tumors (15%), and eight primary bone lesions (7%). During the follow-up period, 83 teeth erupted spontaneously 12–36 months following surgery (74%), 12 were extracted during surgery (11%), and 17 needed orthodontic traction to achieve their aesthetic and functional position (15%). The relationship between mini-invasive surgery and spontaneous eruption was significant (p < 0.00001). Conclusions: Within the limitations of this study, mini-invasive surgical treatment preceded by a correct diagnosis may lead to a spontaneous eruption of permanent teeth, avoiding further orthodontic intervention and premature loss of permanent teeth. Full article

Background/Objectives: Anterior open bite (AOB) is a complex malocclusion characterized by the lack of vertical overlap between the upper and lower teeth during maximum intercuspation. It often results in functional impairments and aesthetic concerns. Traditional treatments for adult patients, including orthognathic surgery, are effective but invasive. Temporary anchorage devices (TADs) have emerged as a minimally invasive alternative. The aim of this systematic review and meta-analysis was to evaluate the effectiveness of TADs for molar intrusion in the correction of AOB. Methods: A systematic review was conducted according to the PRISMA 2020 guidelines. An electronic search was performed in PubMed and Scopus until March 2025. The inclusion criteria comprised clinical studies in humans published in English or Spanish in the last 10 years. The risk of bias was assessed using RoB 2, ROBINS-I, and the Joanna Briggs Institute tools. A random-effects meta-analysis was carried out to estimate pooled intrusion values, and heterogeneity was evaluated using Cochran’s Q test and the I² statistic. Results: Twelve studies were included. Molar intrusion using TADs achieved significant overbite improvements, with a pooled mean intrusion of 1.70 mm (95% CI: 0.53–2.87 mm). The heterogeneity among studies was high (I² = 88.5%). Despite variability in force magnitude and TAD type, lighter forces were generally associated with similar outcomes and fewer adverse effects. Conclusions: TADs offer a predictable and less invasive alternative to orthognathic surgery for AOB correction. When appropriately indicated and biomechanically managed, they provide effective vertical control and short- to medium-term stability in adult patients. Full article

Background/Objectives: Among the paranasal sinuses, the maxillary antrum holds unique clinical relevance due to its proximity to the alveolar process of the maxilla, which houses the teeth. This study aimed to evaluate the position of the root apices of the maxillary canines and posterior teeth relative to the maxillary sinus floor in Romanian subjects. Methods: Data for the study were retrospectively obtained from cone-beam computed tomography (CBCT) scans. The evaluation considered the pattern of proximity to the sinus floor for each tooth type, comparisons of the sinus relationships of teeth within the same dental hemiarch, as well as those of homologous teeth, and variation in root-to-sinus distance in relation to sex and age. Nonparametric tests were used for statistical analysis, and multiple comparisons were performed using Bonferroni post hoc correction. Results: The study included 70 individuals aged 20 to 60 years. The distance to the sinus floor decreased progressively from the first premolar to the second molar, with median values of 3.68 mm (first premolar), 1.45 mm (second premolar), 0.50 mm (first molar), and 0.34 mm (second molar) (p < 0.01). Stronger correlations were observed between adjacent teeth than between non-adjacent ones. The distances to the sinus floor were greater on the right side compared to the left; however, these differences were not statistically significant (p > 0.05 for all teeth). Concordance between left and right dental hemiarches regarding the closest tooth to the sinus floor was found in 70% of cases (n = 49), most frequently involving the second molars (n = 38; 54.3%). On average, the distance from the sinus floor was smaller in males compared to females, with statistically significant differences observed only for the second molar. Increased age was associated with a greater distance to the sinus floor. Conclusions: Of all the teeth investigated, the second molar showed the highest combined prevalence of penetrating and tangential relationships with the maxillary sinus. At the dental hemiarch level, the second molar was most frequently the closest tooth to the sinus floor, and in the majority of cases, at least one posterior tooth was located within 0.3 mm. Accurate preoperative assessment of tooth position relative to the sinus floor is essential when performing non-surgical or surgical root canal therapy and extractions of maxillary molars and premolars. CBCT provides essential three-dimensional imaging that improves diagnostic precision and supports safer treatment planning for procedures involving the posterior maxilla. Full article

The success of adhesive restorations largely depends on the optimal bond strength between the tooth structure and the restorative material. The aim of this study was to evaluate the shear bond strength (SBS) of four different adhesives applied to mandibular molars on deep and superficial dentin. The total of 56 teeth used in the study were randomly divided into 2 subgroups of superficial dentin and deep dentin participants (n = 28). Superficial and deep dentin groups were randomly divided into 4 subgroups (n = 7) for application with different adhesive agents. We formed the following groups: Group 1 (G1)—deep dentin and GC bonding agent (G-Premio BOND); Group 2 (G2)—superficial dentin and GC bonding agent; Group 3 (G3)—deep dentin and Clearfil S3 bond bonding agent (Clearfil TM S3 BOND); Group 4 (G4)—superficial dentin and Clearfil S3 bond bonding agent; Group 5 (G5)—deep dentin and KerrOptibond bonding agent (KerrOptibond^TM Universal); Group 6 (G6)—superficial dentin and Kerr Optibond bonding agent; Group 7 (G7)—deep dentin and 3M-ESPE universal bonding agent (3M ESPE); Group 8 (G8)—superficial dentin and 3M-ESPE universal bonding agent. The silicone block with a diameter of 3 mm and a thickness of 1 mm was placed in the middle of the occlusal surface and the test composite was loaded. All prepared specimens were aged in thermal cycles at 5–55 °C for 5000 cycles. The teeth were subjected to SBS (shear bond strength) tests at a crosshead speed of 1 mm/min in a universal testing machine. In all adhesive systems, deep dentin showed a higher bond strength than superficial dentin and the bond strength value was statistically significant (p = 0.05). The bond strength in all tested adhesive systems was observed to be significantly higher in deep dentin than in superficial dentin. Full article

Background/Objectives: The aim of this study was to identify and assess the independent risk factors and potential predictors for endo-periodontal lesions (EPLs) in endodontically treated teeth with periapical pathology. Methods: The study group included 90 patients (35 men, 55 women; mean age 47.96 ± 13.495 years) with 126 endodontically treated teeth. Following clinical examinations and radiologic evaluation, 50 patients were diagnosed with endo-periodontal lesions (EPLs) in 64 molars (test group); the control group included 62 endodontically treated teeth without EPLs diagnosed in 40 patients. The independent variables were assessed as risk factors for EPLs. The relationship between patients’ demographic and clinical features and endo-periodontal status was assessed using Chi-squared tests for categorical variables and Student’s t- or Mann–Whitney tests for continuous variables, depending on data distribution. The potential risk factors were characterized by calculating Odds Ratios (ORs) with 95% confidence intervals. The variables included in the multivariate logistic regression model were selected based on their clinical relevance and statistical significance in the univariate analysis. To evaluate the combined effect of the identified risk factors, a binary logistic regression model was constructed using the Enter method. Results: Out of the 126 endodontically treated molars with periapical pathology, 64 teeth (50.8%) were diagnosed with endo-periodontal lesions (EPLs). Patients aged ≥60 years were significantly more represented in the EPL group (32.8%) compared to the control group (12.9%) (p = 0.024). Probing pocket depth ≥ 4 mm was present in 85.9% of teeth with EPLs versus only 30.6% in teeth without EPLs (p < 0.001). Probing pocket depth (PPD) ≥ 4 mm was the strongest predictor (OR = 13.830) and remained significant after adjustment in multivariate analysis (OR = 6.585). PPD ≥ 3.625 mm showed a strong association in univariate analysis (OR = 12.587) and preserved significance in the multivariate model (OR = 6.163). Conclusions: This study highlights age ≥ 60 years and PPD ≥ 4 mm as the most significant independent risk factors for EPLs, emphasizing the need for early periodontal assessment in endodontically treated teeth with periapical pathology. While PPD greater than 3.625 mm is a strong indicator of the presence of EPLs, other factors such as MBL (marginal bone loss) and occlusal considerations appear to have indirect roles in EPL development in endodontically treated teeth with periapical lesions. Full article

The accurate identification and protection of the lingual nerve during oral surgery are critical to avoid complications such as a loss of taste or sensation and chronic pain. While numerous studies have described the nerve’s anatomy and injury outcomes, no consensus exists on the optimal method to trace its full course. This narrative review systematically examined the literature from 2010 to 2024, using databases like PubMed, MEDLINE, Embase, and Google Scholar. Keywords included “Lingual nerve,” “Course,” “Anatomy,” and “Clinical implications,” combined with Boolean operators. Studies were selected based on defined criteria, and findings were synthesized to highlight key challenges in diagnosing the nerve’s path. This review identifies difficulties at multiple anatomical sites: the foramen ovale, infratemporal fossa, pterygomandibular space, third molar and retromolar regions, premolar/molar areas, floor of the mouth, and anterior gingiva and tongue. Lingual nerve injury, especially during lower third molar surgeries, remains a major concern, often exacerbated by factors like patient age, unerupted teeth, and lingual surgical approaches. Effective prevention hinges on precise anatomical knowledge and meticulous surgical technique. Microsurgical repair remains the primary treatment but often yields unpredictable outcomes. Emerging regenerative therapies show early promise but require further clinical validation. Imaging tools such as magnetic resonance imaging (MRI) and ultrasound may enhance diagnostic accuracy and surgical planning; however, each has limitations in everyday practice. Ultimately, early identification, careful surgical handling, and appropriate imaging support are vital for improving patient outcomes and minimizing the risks of lingual nerve injury. Full article

Background/Objectives: Currently, clear aligners are preferred to conventional appliances, especially among adult patients. However, the use of aligners for treating maxillary constriction is still debated in the literature. Therefore, the purpose of this study was to assess maxillary dentoalveolar expansion following clear aligner therapy in adults using CBCT scans. Methods: The study sample encompassed 50 non-growing patients (27 females and 23 males) aged 20 to 42 undergoing clear aligner orthodontics without dental extractions or auxiliaries. Transverse linear distances were measured on initial and final CBCTs and, subsequently, analysed through paired t-test and ANOVA. We considered alveolar bone measurements and interdental widths measured at the buccal apices and cusps from canines to second molars. Results: The buccal alveolar ridge width showed the greatest expansion (1.01 ± 0.38 mm), followed by the palatal alveolar ridge and maxillary alveolar bone. Statistically significant improvements were observed for all interdental measurements. The most considerable changes occurred in the interpremolar cusp distances, while the least changes were seen in the intermolar apex distances. At the cusp level, the average interpremolar widths increased by 3.44 ± 0.22 mm for the first premolars and 3.14 ± 0.27 mm for the second ones. Conclusions: Clear aligner treatment can effectively manage a constricted maxillary arch. We found significant changes in the maxillary alveolar bone. Both inter-apex and inter-cusp widths increased in all teeth, with the highest values in the premolars. Moreover, the increases in interdental distances at both apex and cusp levels were related to tooth position. Full article

Background/Objectives: Recently, a novel magnetic attachment system was introduced to improve performance. Using the same technology, a new ultra-thin magnetic attachment (UTMA) was possible to produce. This study aimed to evaluate the feasibility of a magnet-retained telescopic partial denture (MTPD) utilizing the new UTMA. Methods: This in vitro study was performed using a titanium master model representing prepared lower first-premolar and second-molar abutment teeth. The inner crowns (ICs) (h: 4 mm, 4° taper) and four-unit MTPDs were fabricated via computer-aided design/computer-aided manufacturing (CAD/CAM) using zirconia. A Ø4 mm UTMA system (magnet assembly and keeper thickness: 0.6 mm and 0.4 mm, respectively) was cemented into the MTPD and the ICs using dual-cure resin cement. A load of 100 N was applied along with 10,000 insertion–removal cycles. The MTPD retentive force was measured before and after every set of 1000 cycles. Stability tests and surface morphology evaluations were conducted before and after cycling. A paired t-test (α = 0.05) was used to observe statistical differences. Results: The average retentive force of the MTPD was 6.86 ± 0.63 N and did not change significantly (p > 0.05) following the load cycles (6.66 ± 0.79 N). The MTPD demonstrated adequate stability under the occlusal load. Minimal deformations were observed on the magnet assemblies, keepers, ICs, and MTPD surfaces after the load tests. Conclusions: Considering the limitations of this study, an MTPD utilizing novel UTMAs fabricated through a digital workflow demonstrated adequate retentive force, stability, and durability for clinical use. Full article

Surgical extraction of the third molars is frequently performed because they often do not have enough space to erupt properly, resulting in partial or complete impaction and causing pain, infection, cysts, and damage to adjacent teeth. The decision to remove third molars is based on clinical and radiographic evaluations, considering factors such as angulation, depth of impaction, and presence of symptoms. In some cases, general anesthesia or sedation is required. The post-operative period may include swelling, pain, and bleeding, managed with pain relievers and antibiotics. Possible complications include infection, nerve damage, and the formation of a dry socket. Full article

Background: Dental radiographs play a crucial role in diagnosis and treatment planning. With the rise in digital imaging, there is growing interest in leveraging artificial intelligence (AI) to support clinical decision-making. AI technologies can enhance diagnostic accuracy by automating tasks like identifying and locating dental structures. The aim of the current study was to assess and validate the accuracy of an AI-powered application in the detection and numbering of primary teeth on panoramic radiographs. Methods: This study examined 598 archived panoramic radiographs of subjects aged 4–14 years old. Images with poor diagnostic quality were excluded. Three experienced clinicians independently assessed each image to establish the ground truth for primary teeth identification. The same radiographs were then evaluated using EM2AI, an AI-based diagnostic software for the automatic detection and numbering of primary teeth. The AI’s performance was assessed by comparing its output to the ground truth using sensitivity, specificity, predictive values, accuracy, and the Kappa coefficient. Results: EM2AI demonstrated high overall performance in detecting and numbering primary teeth in mixed dentition, with an accuracy of 0.98, a sensitivity of 0.97, a specificity of 0.99, and a Kappa coefficient of 0.96. Detection accuracy for individual teeth ranged from 0.96 to 0.99. The highest sensitivity (0.99) was observed in detecting upper right canines and primary molars, while the lowest sensitivity (0.79–0.85) occurred in detecting lower incisors and the upper left first molar. Conclusions: The AI module demonstrated high accuracy in the automatic detection of primary teeth presence and numbering in panoramic images, with performance metrics exceeding 90%. With further validation, such systems could support automated dental charting, improve electronic dental records, and aid clinical decision-making. Full article