Search Results (45)

This study presents the high-speed visualization of the detonation wave structure in a small-scale hydrogen–oxygen rotating detonation combustor. A 68 mm Rotating Detonation Combustor was modified with a quartz-glass ring, such that radial optical access into the annular detonation chamber was realized. The optical access window covers approximately the first 22 mm of the detonation chamber. The modified experiment was hot-fire tested with the propellant combination gaseous hydrogen–oxygen. Simultaneous high-speed imaging from the back-end of the chamber and normal to the chamber axis allows a thorough investigation of the detonation wave characteristics. Both high-speed cameras were operated at 180,000 frames per second in order to resolve and capture the detonation waves. The downstream camera was used in order to investigate the number of waves and the spinning direction. A stable regime of three co-rotating waves was observed. The wave speed achieved 71% of the theoretical CJ-velocity. The second camera recorded the passing detonation waves through a quartz ring via OH* emissions. From the post-processed OH* images, a better understanding of the detonation wave structure, including the filling height of the fresh gas mixture as well as the approximate angles of the detonation and the shock wave, could be gained. The obtained height of the detonation wave is about 11–12 mm or 6–7 detonation cell sizes for the given setup and experimental conditions. Full article

The deployment of 5G networks has transformed the landscape of radiofrequency electromagnetic field (RF-EMF) exposure patterns, shifting from high-power macro base stations to dense networks of small, beamforming cells. This review critically assesses the validity, challenges, and research gaps of low-cost RF-EMF sensors used for 5G exposure monitoring. An analysis of over 60 studies covering Sub-6 GHz and emerging mmWave systems shows that well-calibrated sensors can achieve measurement deviations of ±3–6 dB compared to professional instruments like the Narda SRM-3006, with long-term calibration drift less than 0.5 dB per month and RMS reproducibility around 5%. Typical outdoor 5G FR1 exposure levels range from 0.01 to 0.5 W/m² near small cells, while personal device use can cause transient exposures 10–30 dB higher. Although mmWave (24–100 GHz) and Wi-Fi 7/8 (~60 GHz) are underrepresented due to antenna and component limitations, Sub-6 GHz sensing platforms, including software-defined radio (SDR)-based and triaxial isotropic designs, provide sufficient sensitivity for both citizen and institutional monitoring. Major challenges involve calibration drift, frequency band gaps, data interoperability, and ethical management of participatory networks. Addressing these issues through standardized calibration protocols, machine learning-assisted drift correction, and open data frameworks will allow affordable sensors to complement professional monitoring, improve spatial coverage, and enhance public transparency in 5G RF-EMF exposure governance. Full article

The highly directional narrow-beam operation in mmWave networks, while effective at suppressing interference, lacks adaptability to dynamic traffic variations and blockages compared to D-TDD and JT schemes. D-TDD efficiently mitigates DL–UL cross-interference during asymmetric traffic. At the same time, joint transmission coordinates multiple base stations to deliver phase-aligned signals, converting interference into useful combined power and ensuring stable links under dynamic slot changes. However, these adaptive regimes are often overlooked in recent mmWave designs, leading to degraded communication performance. This work proposes D-TDD-based cooperative caching (DTCC) mmWave networks, where randomly distributed base stations with local caches enhance reliability and reduce backhaul load. Closed-form expressions for the cache hit probability and the average content success probability (ASP) are derived under the proposed DTCC framework. Popularity-based caching strategies with both equal and variable file sizes are analysed to maximise network-level performance. The simulation results validate that the proposed DTCC framework consistently enhances ASP in dense small-cell deployments, offering notable reliability gains over conventional single-BS (SBS) and static TDD (S-TDD)-based cooperative caching approaches. Full article

Traditional PMUT ultrasonic ranging systems usually possess a large measurement blind area under the integrated transmit–receive mode, dramatically limiting its distance measurement in confined spaces, such as when determining the clearance of large bearing components. Here, a broadband PMUT rangefinder was designed by integrating six types of different cells with adjacent resonant frequencies into an array. Through overlapping and coupling of the bandwidths from the different cells, the proposed PMUTs showed a wide –6 dB fractional bandwidth of 108% in silicon oil. Due to the broadening of bandwidth, the device could obtain the maximum steady state with less excitation (5 cycles versus 14 cycles) and reduce its residual ring-down (ca. 6 μs versus 15 μs) compared with the traditional PMUT array with the same cells, resulting in a small blind area. The pulse–echo ranging experiments demonstrated that the blind area was effectively reduced to 4.4 mm in air or 12.8 mm in silicon oil, and the error was controlled within ±0.3 mm for distance measurements up to 250 mm. In addition, a specific ultrasound signal processing circuit with functions of transmitting, receiving, and processing ultrasonic waves was developed. Combining the processing circuit and PMUT device, the system was applied to determine the axial clearance of the main bearing in a tunneling machine. This work develops broadband PMUTs with a small blind area and high resolution for distance measurement in narrow and confined spaces, opening up a new path for ultrasonic ranging technology. Full article

This paper presents a highly linear two-stage InGaP/GaAs power amplifier integrated circuit (PAIC) using a dynamic predistorter for 5G small-cell applications. The proposed predistorter, based on a diode-connected transistor, utilizes a supply voltage to accurately control the linearization characteristics by adjusting its dc current. It is connected in parallel with an inter-stage of the two-stage PAIC through a series configuration of a resistor and an inductor, and features a shunt capacitor at the base of the transistor. These passive components have been optimized to enhance the linearization performance by managing the RF signal’s coupling to the diode. Using these optimized components, the AM−AM and AM−PM nonlinearities arising from the nonlinear resistance and capacitance in the diode can be effectively used to significantly flatten the AM−AM and AM−PM characteristics of the PAIC. The proposed predistorter was applied to the 2.6 GHz two-stage InGaP/GaAs HBT PAIC. The IC was tested using a 5 × 5 mm² module package based on a four-layer laminate. The load network was implemented off-chip on the laminate. By employing a continuous-wave (CW) signal, the AM−AM and AM−PM characteristics at 2.55–2.65 GHz were improved by approximately 0.05 dB and 3°, respectively. When utilizing the new radio (NR) signal, based on OFDM cyclic prefix (CP) with a signal bandwidth of 100 MHz and a peak-to-average power ratio (PAPR) of 9.7 dB, the power-added efficiency (PAE) reached at least 11.8%, and the average output power was no less than 24 dBm, achieving an adjacent channel leakage power ratio (ACLR) of −40.0 dBc. Full article

This paper presents a new approach to measuring eyelid movement using millimeter wave (mmW) radar technology. A two-step method is proposed, involving the observation of a small resolution cell corresponding to the monitored eye and the evaluation of the phase evolution over the measurement period. Simulations are conducted to support radar system optimization and data interpretation with a focus on detecting eyelid movement patterns and compensating for interference from other parts of the body. The feasibility of using this method with eyeglasses is also explored. The proposed technique’s advantages and limitations are discussed in comparison with existing measurement alternatives. The characteristics of eyelid dynamics, including blink frequency, regularity, duration, and velocity can be used to assess neurological conditions and driver drowsiness. Full article

In this paper, a 3D conformal meta-lens designed for manipulating electromagnetic beams via height-to-phase control is proposed. The structure consists of a 40 × 20 array of tunable unit cells fabricated using 3D printing, enabling full 360° phase compensation. A novel automatic synthesizing method (ASM) with an integrated optimization process based on genetic algorithm (GA) is adopted here to create the meta-lens. Simulation using CST Microwave Studio and MATLAB reveals the antenna’s beam deflection capability by adjusting phase compensations for each unit cell. Various beam scanning techniques are demonstrated, including single-beam, dual-beam generation, and orbital angular momentum (OAM) beam deflection at different angles of 0°, 10°, 15°, 25°, 30°, and 45°. A 3D-printed prototype of the dual-beam feature has been fabricated and measured for validation purposes, with good agreement between both simulation and measurement results, with small discrepancies due to 3D printing’s low resolution and fabrication errors. This meta-lens shows promise for low-cost, high-gain beam deflection in mm-wave wireless communication systems, especially for sensing applications, with potential for wider 2D beam scanning and independent beam deflection enhancements. Full article

Integrated sensing and communication (ISAC) is emerging as a main feature for 5G/6G communications. To enhance spectral and energy efficiencies in wireless environments, reconfigurable intelligent surfaces (RISs) will play a significant role in beyond-5G/6G communications. Multi-functional RISs, capable of not only reflecting or transmitting the beam in desired directions but also sensing the signal, wirelessly transferring power to nearby devices, harvesting energy, etc., will be highly beneficial for beyond-5G/6G applications. In this paper, we propose a nearly 2-bit unit cell of RISs integrated with sensing capabilities in the millimeter wave (mmWave) frequency band. To collect a very small fraction of the impinging signals through vias, we employed substrate integrated waveguide (SIW) technology at the bottom of the unit cell and a via. This enabled the sensing of incoming signals, requiring only a small amount of the impinging signal to be collected through SIW. Initially, we utilized Floquet ports and boundary conditions to obtain various parameters of the unit cells. Subsequently, we examined 1 × 3-unit cells, placing them on the waveguide model to obtain the required parameters of the unit cell. By using the waveguide and 1 × 3-unit cell arrays, the sensing amount was also determined. Full article

Composite thin film absorbers show superior performance and have a wide range of applications. Obtaining a broadband composite thin film absorber is a challenge. In this work, we proposed a modeling of a broadband microwave composite thin film absorber based on the impedance matching theory and equivalent circuit model of the square loop. The unit cell of the absorber was composed of metal square loops with high magnetic conductivity deposited on the polyethylene substrate, and an FR-4 (epoxy glass cloth) substrate was the spacer substrate layer. The simulation results show that the absorptivity of the absorber reached more than 90% in the frequency range of 8.7–18 GHz for TE and TM waves under normal incidence. The thickness of the designed absorber was 2.05 mm (0.059 λ_max, λ_max corresponds to the maximum absorption wavelength). The simulation results show that the energy distribution in the proposed absorber was mainly localized in the top metal FSS layer due to the ohmic loss of metal, and the dielectric loss played a small role in the absorption of the absorber. Our work provides a design approach to improve the efficiency of optoelectronic devices and thermal detectors and has application prospects in radar and aircraft stealth applications. Full article

Follicular fluid (FF) ensures a safe environment for oocyte growth and maturation inside the ovarian follicle in mammals. In each cycle, the large dominant follicle (LF) contains the oocyte designated to be ovulated, whereas the small subordinate follicles (SFs) of the same wave will die through atresia. In cows, the oocytes from the SF, being 2 mm in size, are suitable for in vitro reproduction biotechnologies, and their competence in developing an embryo depends on the size of the follicles. FF contains proteins, metabolites, fatty acids, and a multitude of extracellular vesicles (ffEVs) of different origins, which may influence oocyte competence through bidirectional exchanges of specific molecular cargo between follicular cells and enclosed oocytes. FF composition evolves along with follicle growth, and the abundance of different lipids varies between the LF and SF. Here, significant differences in FF lipid content between the LFs and SFs within the same ovary were demonstrated by MALD-TOF mass spectrometry imaging on bovine ovarian sections. We then aimed to enlighten the lipid composition of FF, and MALDI-TOF lipid profiling was performed on cellular, vesicular, and liquid fractions of FF. Differential analyses on the abundance of detected lipid features revealed specific enrichment of phospholipids in different ffEV types, such as microvesicles (MVs) and exosomes (Exo), compared to depleted FF. MALDI-TOF lipid profiling on MVs and Exo from the LF and SF samples (n = 24) revealed that more than 40% of detected features were differentially abundant between the groups of MVs and Exo from the different follicles (p < 0.01, fold change > 2). Glycerophospholipid and sphingolipid features were more abundant in ffEVs from the SFs, whereas different lysophospholipids, including phosphatidylinositols, were more abundant in the LFs. As determined by functional analysis, the specific lipid composition of ffEVs suggested the involvement of vesicular lipids in cell signaling pathways and largely contributed to the differentiation of the dominant and subordinate follicles. Full article

The effect of microchannel height on acoustic streaming velocity and capacitive micromachined ultrasound transducer (CMUT) cell damping was investigated. Microchannels with heights ranging from 0.15 to 1.75 mm were used in experiments, and computational microchannel models with heights varying from 10 to 1800 micrometers were simulated. Both simulated and measured data show local minima and maxima of acoustic streaming efficiency associated with the wavelength of the `bulk acoustic wave excited at 5 MHz frequency. Local minima occur at microchannel heights that are multiples of half the wavelength (150 μm), which are caused by destructive interference between excited and reflected acoustic waves. Therefore, microchannel heights that are not multiples of 150 μm are more favorable for higher acoustic streaming effectiveness since destructive interference decreases the acoustic streaming effectiveness by more than 4 times. On average, the experimental data show slightly higher velocities for smaller microchannels than the simulated data, but the overall observation of higher streaming velocities in larger microchannels is not altered. In additional simulation, at small microchannel heights (10–350 μm), local minima at microchannel heights that are multiples of 150 μm were observed, indicating the interference between excited and reflected waves and causing acoustic damping of comparatively compliant CMUT membranes. Increasing the microchannel height to over 100 μm tends to eliminate the acoustic damping effect as the local minima of the CMUT membrane swing amplitude approach the maximum value of 42 nm, which is the calculated amplitude of the freely swinging membrane under the described conditions. At optimum conditions, an acoustic streaming velocity of over 2 mm/s in a 1.8 mm-high microchannel was achieved. Full article

Future networks would be dense, reducing the link length between users and the base stations (BSs). Moreover, a higher frequency spectrum, such as millimeter wave (mmWave) will be employed for providing high data rates and capacity but at the cost of increased path loss and blockage. The challenges in a dense network are two-fold: firstly, small link lengths require taking into account the BS height for optimum coverage performance; secondly, to mitigate signal loss at high frequencies, the BS and users must be equipped with antenna arrays. In this work, we derive mathematical expressions for signal-to-interference-plus-noise (SINR) coverage probability for a three-dimensional mmWave network by considering the height of BS and the buildings’ blockage. Uniform cylindrical antenna arrays are employed at BS and user equipment. Results show that there exists a certain BS height for a particular BS density and cell radius at which the coverage probability could be maximized. Full article

Millimeter-wave (mmWave) communication is considered a promising technology for fifth-generation (5G) wireless communications systems since it can greatly improve system throughput. Unfortunately, because of extremely high frequency, mmWave transmission suffers from the signal blocking problem, which leads to the deterioration of transmission performance. In this paper, we solve this problem by the combination of ultra-dense network (UDN) and user-centric virtual cell architecture. The deployment of dense small base stations (SBSs) in UDN can reduce transmission distance of signals. The user-centric virtual cell architecture mitigates and exploits interference to improve throughput by using coordinated multipoint (CoMP) transmission technology. Nonetheless, the backhaul burden is heavy and interbeam interference still severe. Therefore, we propose a novel iterative backhaul capacity-limited joint user association and power allocation (JUAPA) scheme in ultra-dense mmWave networks under user-centric virtual cell architecture. To mitigate interference and satisfy quality of service (QoS) requirements of users, a nonconvex system throughput optimization problem is formulated. To solve this intractable optimization problem, we divide it into two alternating optimization subproblems, i.e., user association and power allocation. During each iteration, a many-to-many matching algorithm is designed to solve user association. Subsequently, we perform power allocation optimization using a successive convex approximation (SCA) algorithm. The results confirm that the performance of the proposed scheme is close to that of the exhaustive searching scheme, which greatly reduces complexity, and clearly superior to that of traditional schemes in improving system throughput and satisfying QoS requirements. Full article

Millimeter-wave (mmWave) communications are a critical technique with next-generation network characteristics such as ultra-dense small cells can meet the skyrocketing demand for mobile data. Hybrid precoding, which combines analog and digital processing to provide both spatial diversity gains and beamforming, is commonly studied for mmWave communications to lower the power and cost consumption of radio frequency (RF) networks. However, the combination of ultra-dense small cells and ever-increasing data traffic results in massive interference. In this paper, we propose a minimum mean square error (MMSE)-based hybrid beamforming strategy for downlink mmWave MIMO two-tier heterogeneous networks (HetNets). The analog beamforming is generalized by an orthogonal matching pursuit technique. The analog beamforming problem is formulated as a sparse signal recovery problem. An MMSE-based digital beamforming algorithm is proposed to minimize the sum MSE of the user-intended data streams so that the inter- and intra-tier interferences are mitigated iteratively. The simulation results demonstrate the advantageous performance of the proposed hybrid beamforming schemes under different cellular cooperation and data transmission scenarios when hardware constraints are taken into account. Full article

Driven by growing mobile traffic, millimeter wave (mmWave) communications have recently been developed to enhance wireless network capacity. Due to insufficient coverage and the lack of support for mobility, mmWave is often deployed in the ultra-dense small cells of the 5G heterogeneous network. In this article, we first summarize the characteristics of the 5G heterogeneous network from the viewpoints of devices, spectra, and networks. We then propose a triple-band network structure which incorporates licensed bands, sub-6GHz unlicensed bands, and mmWave bands to support various types of mobile users. Based on the novel network structure, we further propose a self-optimizing traffic steering strategy which can intelligently steer traffic to specific networks and spectra according to the dynamic network and traffic environments. Several use cases are also discussed to facilitate the implementation of our proposals. Finally, we present numerical results to demonstrate that the proposed network structure and strategy can effectively enhance the system throughput and energy efficiency. Full article