Search Results (136)

Background: Reconstruction of the maxilla and midface remains one of the most demanding challenges in craniofacial surgery, requiring precise planning and a clear understanding of defect geometry to achieve functional and esthetic restoration. Advances in computer-assisted surgery (CAS) and virtual surgical planning (VSP), based on 3D segmentation of radiologic imaging, have significantly improved the management of maxillary deformities, allowing for further knowledge of patient-specific information, including anatomy, pathology, surgical planning, and reconstructive issues. The integration of computer-aided design and manufacturing (CAD/CAM) and 3D printing has further transformed reconstruction through customized titanium meshes, implants, and surgical guides. Methods:This systematic review, conducted following PRISMA 2020 guidelines, synthesizes evidence from clinical studies on CAD/CAM-assisted reconstruction of maxillary and midfacial defects of congenital, acquired, or post-resection origin. It highlights the advantages and drawbacks of maxillary reconstruction with patient-specific implants (PSISs). Primary outcomes are represented by accuracy in VSP reproduction, while secondary outcomes included esthetic results, functions, and assessment of complications. Results: Of the 44 identified articles, 10 met inclusion criteria with a time frame from April 2013 to July 2022. The outcomes of 24 treated patients are reported. CAD/CAM-guided techniques seemed to improve osteotomy accuracy, flap contouring, and implant adaptation. Conclusions: Although current data support the efficacy and safety of CAD/CAM-based approaches, limitations persist, including high costs, technological dependency, and variable long-term outcome data. This article critically evaluates the role of PSISs in maxillofacial reconstruction and outlines future directions for its standardization and broader adoption in clinical practice. Full article

Background/Objectives: Mini-Screw-Assisted Rapid Skeletal Expansion (MARPE) appliances have been widely used for maxillary skeletal expansion in non-growing subjects and adolescents with a fused midpalatal suture. The current case report describes the immediate 3D cephalometric changes in the skeletal and soft tissue parameters, along with upper airway volume, shape, and dimensions, in a patient with Skeletal Class I anterior underbite. Methods: The pre- and post-expansion full-face Cone-Beam Computed Tomograms (CBCTs) of a 19-year-old patient who underwent 3D-guided midpalatal piezocorticotomy-assisted MARPE were compared and analyzed using 3D cephalometric software. Both CBCT volumes were re-oriented relative to the Frankfurt horizontal plane (FHP) to accommodate postural changes. Results: The total upper airway volume and minimum upper airway cross-section increased after expansion. The nasal base plane (ANS–PNS) rotated in all three spatial planes, including the sagittal plane (anterior downward and posterior upward rotation, with the center of rotation around the maxillary center of rotation) and the vertical plane (upward rotation on the left side). The maxillary canine and molar cant planes rotated around the center of rotation in the midface, with left upward and right downward rotation. The orientation of the ANS–PNS plane changed due to the leftward rotation of the ANS, with the center of rotation approaching the PNS. Cervical curvature improved from kyphotic to lordotic immediately following expansion. Conclusions: Three-dimensionally guided midpalatal piezocorticotomy-assisted MARPE has been shown to produce midfacial changes in all three spatial planes when evaluated via 3D cephalometric analysis. Comprehensive observational studies are necessary to analyze these changes and their effects for different skeletal classifications. Full article

Background: Naso-orbital-ethmoid (NOE) fractures represent complex midface injuries that challenge aesthetic and functional reconstruction. This study evaluates the efficacy of techniques restoring intercanthal distance following operative repair of NOE fractures. Methods: A retrospective case series was conducted of adults undergoing NOE fracture repair between 2010 and 2022. CPT codes were used to identify patients, with inclusion based on radiographic confirmation of NOE fractures. Demographic data, fracture classification, operative techniques, and pre- and post-operative CT measurements of intercanthal distance were analyzed by fracture type and type of repair. Results: 191 patients were identified, mostly male (80%), with Type I fractures being most common (66%). Intercanthal wiring was used in 14% of cases, most frequently for Type II and III fractures. Of the 100 patients with post-operative comparison imaging, the median intercanthal distance improved from 34 mm to 31 mm. Intercanthal wiring yielded greater median distance correction. All patients achieved restoration of intercanthal distance within normal limits regardless of repair technique. Conclusions: Operative repair of NOE fractures using either plating or intercanthal wiring effectively restores normal intercanthal distance. While intercanthal wiring remains valuable in severe fractures, it may not be universally necessary. Further study is needed to refine the role of these repair techniques. Full article

Background/Objectives: Glucagon-like peptide-1 (GLP-1) and glucose-dependent insulinotropic polypeptide (GIP) receptor agonists have revolutionised obesity and type 2 diabetes management through effective weight loss and metabolic regulation. However, their increasing use has led to reports of adverse aesthetic and functional effects, particularly affecting facial and ocular tissues. Methods: A comprehensive literature review was conducted in October 2025 across PubMed, Embase, and Medline using the terms “GLP-1 receptor agonist,” “Ozempic face,” “facial lipoatrophy,” “ocular surface disease,” “orbital fat,” and related combinations. Studies reporting facial, periorbital, orbital, or ocular surface changes associated with GLP-1 or GLP-1/GIP receptor agonists were included. Reference lists were screened to identify additional sources. Results: Evidence suggests that GLP-1 and dual GLP-1/GIP receptor agonists may contribute to rapid facial volume loss, dermal fat atrophy, and periocular hollowing—collectively termed “Ozempic face.” The mechanism is multifactorial, involving both weight-loss-related fat depletion and potential modulation of adipocyte differentiation. Ocular surface improvements have been observed in some studies. Radiologic data demonstrate preferential superficial midface fat loss, informing potential aesthetic correction strategies. Conclusions: GLP-1-based therapies, while clinically effective, can result in perceptible adnexal and periocular changes with aesthetic and functional implications. Awareness of these effects is crucial for multidisciplinary management. Future prospective studies are warranted to clarify mechanisms and guide individualised reconstructive and rejuvenative interventions. Full article

Background: Facial retaining ligaments are pivotal in maintaining facial structure and are increasingly recognized as critical components in modern facelift procedures. Their age-related laxity contributes to facial sagging, jowling, and volume descent, necessitating a detailed understanding of their anatomy and function to achieve natural and lasting aesthetic outcomes. Despite advances in technique, there remains an ongoing debate regarding whether surgical preservation or release of these ligaments yields superior results. Methods: This narrative review analyzes peer-reviewed literature on various facelift techniques, focusing specifically on how each approach manages retaining ligaments. Techniques assessed include subcutaneous, SMAS, deep plane, composite, subperiosteal, and extended SMAS rhytidectomies, as well as more recent methods such as the MACS lift and PRESTO facelift. Anatomical variations and their surgical implications were evaluated, alongside aesthetic outcomes, recovery profiles, and complication risks. Results: Ligament-releasing techniques, such as the deep plane and extended SMAS facelifts, allow for greater tissue mobilization, improved repositioning of midfacial and cervical tissues. Conversely, ligament-preserving techniques, such as the MACS and PRESTO lifts, offer safer, less invasive, though with more limited correction in severe laxity. The review emphasizes that variability in ligament anatomy requires a patient-specific surgical plan to optimize results. Conclusions: The management of retaining ligaments remains a cornerstone of facial rejuvenation strategies. Surgical success hinges on a tailored approach, balancing the need for comprehensive lift with the preservation of facial identity and anatomical safety. Further clinical research and advancements in imaging and surgical technology are needed to refine technique selection and enhance long-term outcomes. Full article

Background/Objectives: This study retrospectively evaluated maxillary sinus volume changes and linear changes in the craniofacial region after Le Fort I distraction osteogenesis using a rigid external distraction system. Methods: Ten patients who underwent LeFort 1 distraction osteogenesis between 2012 and 2025 were included in the study. Computed tomography scans and lateral cephalograms were obtained before and 12.3 ± 6.98 months after the surgery. The associated volumes of the maxillary left and right sinuses were subsequently measured using the semiautomatic segmentation method in the ITK-SNAP software. Linear measurements of the sinuses and cephalometric analysis were performed before and after the distraction. Results: The Wits appraisal (distance between perpendicular lines drawn from point A (on the maxilla) and point B (on the mandible) to the occlusal plane) presented an increase of 9.33 mm ± 7.93 mm, corresponding to an increase in the ANB angle by 9.88° ± 5.35°. There were statistically significant increases in the total sinus volume, by 3965 mm³ ± 5456 mm³ (n = 10, p = 0.047), and in the single maxillary sinus volume, by 1983 ± 2889 mm³ (n = 20, p = 0.003). A significant increase in height was also observed, with a mean value of 4.46 ± 2.94 mm (n = 20). Conclusions: Extraoral bone-anchored midface distraction osteogenesis led to increases in single sinus volume, total sinus volume and sinus height in the cleft cohort, resulting in improved maxillary retrusion and profile. However, the study group was small and non-uniform with different follow-up periods, indicating a need for further studies with larger, more homogenous cohorts. Full article

The zygomaticus major and minor (ZMa/ZMi) are key determinants of smile dynamics and midface contour, yet they exhibit substantial morphological variability—including bifid or multibellied bellies, accessory slips, and atypical insertions. Such variants can alter force vectors, fat-compartment boundaries, and SMAS planes, increasing the risk of asymmetry, contour irregularities, or “joker smile” following facelifts, fillers, thread lifts, and smile reconstruction. To our knowledge, this is the first review to integrate the Landfald classification of ZMa/ZMi variants with a standardized dynamic imaging-based workflow for aesthetic and reconstructive midface procedures. We conducted a narrative literature synthesis of anatomical and imaging studies. Bifid or multibellied variants have been reported in up to 35% of cadaveric specimens. We synthesize anatomical, biomechanical, and imaging evidence (MRI, dynamic US, 3D analysis) to propose a practical protocol: (1) focused history and dynamic examination, (2) US/EMG mapping of contraction vectors, (3) optional high-resolution MRI for complex cases, and (4) individualized adjustment of surgical vectors, injection planes, and dosing. Procedure-specific adaptations are outlined for deep-plane releases, thread-lift trajectories, filler depth selection, and muscle-transfer orientation. We emphasize that standardizing preoperative dynamic mapping and adopting a “patient-specific mimetic profile” can enhance safety, predictability, and preservation of authentic expression, ultimately improving patient satisfaction across diverse midface interventions. Full article

Background: Hyaluronic acid (HA) fillers are commonly used for midface augmentation because of their biocompatibility and reversibility. Nonetheless, discussions continue about their effectiveness and safety relative to other options. This systematic review and meta-analysis assess the effectiveness, duration, and side effects of HA fillers in midface volume restoration. Methods: Following PRISMA guidelines, a thorough search was performed on PubMed, CENTRAL, Web of Science, Scopus, and EMBASE up to March 2025. The review included randomized controlled trials (RCTs) that compared HA fillers with controls, such as placebo or alternative treatments, for midface augmentation. Results: A total of fourteen studies were included in the review, and five studies in the statistical analysis. Analysis of five RCTs involving 748 participants showed a higher and significant difference in GAIS responder rates between HA and control groups (RR = 3.27, 95% CI: 2.26–4.75, p = 0.79; I² = 95%). GAIS scores at 4, 8, and 24 weeks demonstrated no notable improvements (all p > 0.05). Adverse events were rarely reported, and there was no significant rise in moderate-to-severe adverse events associated with HA fillers (RR = 1.70, 95% CI: 0.08–34.55, p = 0.73). Conclusions: HA fillers used for midface augmentation are generally safe, they have very high midface augmentation and patient satisfaction value, but they might not provide a notable subjective aesthetic benefit over the other fillers. Clinicians need to take into account patient expectations and refine their techniques, all while recognizing the limitations of existing evidence. Future research should include objective volumetric measurements and extend follow-up durations. Full article

Background and Clinical Significance: Granulomatous reactions are rare but clinically significant complications of aesthetic procedures involving dermal fillers, particularly in individuals with underlying immune dysregulation. These reactions present diagnostic and therapeutic challenges, especially when associated with undiagnosed or latent autoimmune diseases. This case illustrates the interaction between filler composition, immune status, and the risk of delayed inflammatory responses, underscoring the need for thorough patient evaluation and individualized management strategies. Case Presentation: A 49-year-old woman developed delayed-onset subcutaneous nodules following midface augmentation with two filler types: a monophasic, cross-linked hyaluronic acid gel (concentration 20 mg/mL, 1.0 mL per side) injected into the deep malar fat pads, and a calcium hydroxyapatite suspension (30% CaHA microspheres in a carboxymethylcellulose carrier, 0.5 mL per side) placed in the subdermal plane along the zygomatic arch. The procedure was performed in a single session using a 22 G blunt cannula, with no immediate adverse events. High-resolution ultrasound demonstrated hypoechoic inflammatory nodules without systemic symptoms. A retrospective review of her medical history revealed a latent, previously undisclosed diagnosis of granulomatosis with polyangiitis (GPA). The immune-adjuvant properties of calcium hydroxyapatite likely triggered a localized pro-inflammatory response in this predisposed patient. A conservative, staged, non-invasive therapeutic protocol—saline infiltration, intradermal polynucleotide injections, and manual lymphatic drainage—achieved complete clinical and radiological resolution without systemic immunosuppression or surgical intervention. Conclusions: This case highlights the critical importance of pre-procedural immunological assessment in aesthetic medicine. Subclinical autoimmune conditions may predispose patients to delayed granulomatous reactions after filler injections. An individualized, conservative management strategy can effectively resolve such complications while minimizing the risks associated with aggressive treatment. Greater awareness of immune-mediated responses to dermal fillers is essential to ensure patient safety and optimize clinical outcomes. Full article

Background/Objectives: While skeletal facial asymmetry is commonly assessed using posteroanterior (PA) cephalometric radiographs, the association between skeletal measurements and volumetric soft tissue asymmetry remains unclear. This study aimed to identify which skeletal parameters are most strongly correlated with soft tissue asymmetry measured using three-dimensional (3D) imaging. Methods: Thirty-three Japanese patients (8 males and 25 females; mean age: 26.85 ± 12.13 years) undergoing orthodontic–orthognathic treatment were included. Three-dimensional facial surface data were acquired using the VECTRA^® H1 imaging system. Soft tissue asymmetry was quantified by calculating the volumetric difference between the original and mirrored 3D facial images, divided into three regions: whole face, midface, and lower face. PA cephalometric radiographs were traced, and 28 skeletal variables were measured. Pearson correlation coefficients were calculated between skeletal variables and asymmetry volumes and squared to obtain R² values. Results: The strongest correlation with whole facial soft tissue asymmetry was found for menton deviation from the midline (R² = 0.630). Similar trends were observed for the lower face. In contrast, only one skeletal variable showed a moderate correlation with midfacial asymmetry (maximum R² = 0.186), and skeletal parameters related to maxillary occlusal cant did not show significant associations. Conclusions: Volumetric soft tissue asymmetry is strongly associated with mandibular skeletal deviation, particularly menton displacement, whereas midfacial skeletal morphology may have a limited impact. Further studies including more patients with pronounced midfacial soft tissue asymmetry are warranted. Full article

Background: Midfacial trauma involving the zygomatic-maxillary-orbital (ZMO) complex poses significant reconstructive challenges due to anatomical complexity and the necessity for high-precision alignment. Traditional manual reduction techniques often result in inconsistent outcomes, necessitating revisions. Methods: This feasibility study presents two clinical cases treated using a novel, fully digital workflow incorporating computer-aided design and manufacturing (CAD/CAM) of patient-specific osteosynthesis plates and surgical drill guides. Following virtual fracture reduction and implant design, drill guides and implants were fabricated using selective laser melting. Surgical procedures included intraoral and transconjunctival approaches with intraoperative 3D imaging (mobile C-arm CT) to verify implant positioning. Postoperative results were compared to the virtual plan through image fusion. Results: Both cases demonstrated precise fit and anatomical restoration. The “one-position-fits-only” orbital implant design enabled highly accurate orbital wall reconstruction. Key procedural refinements between cases included enhanced interdisciplinary collaboration and improved guide designs, resulting in decreased planning-to-surgery intervals (<7 days) and seamless intraoperative application. Image fusion confirmed near-identical congruence between planned and achieved outcomes. Conclusions: The presented method demonstrates that fully digital, CAD/CAM-based midface reconstruction is feasible in the primary trauma setting. The technique offers reproducible precision, reduced intraoperative time, and improved functional and aesthetic outcomes. It may represent a paradigm shift in trauma care, particularly for complex ZMO fractures. Broader clinical adoption appears viable as production speed and workflow integration continue to improve. Full article

Background: Bicycles constitute a primary means of transportation, particularly within the scope of urban micromobility. However, the use of this mode of transport is associated with the risk of traffic accidents and subsequent maxillofacial trauma. Cyclists are classified as vulnerable road users, among whom the assessment of injury patterns is a significant issue. This study aimed to identify the most common maxillofacial fractures resulting from bicycle-related traffic accidents. Methods: A retrospective analysis was conducted on the medical records of patients treated at the Clinic of Maxillofacial Surgery at the University Clinical Hospital in Poznan, who sustained maxillofacial injuries as a result of bicycle-related accidents between 2019 and 2023. Results: A total of 99 patients met the inclusion criteria. Most of the study population was males (70.7%), with a median age of 38. Accidents most frequently occurred during the summer months and on Fridays and weekends. The most common fracture site was the mandible (40.4%), with double fractures being the predominant type. Additionally, zygomatic-orbital fractures were frequently observed (30.3%). In terms of treatment, surgical intervention was predominant, and the mean duration of hospitalisation was 6 days. Only 5.1% of patients were under the influence of alcohol at the time of the incident. Furthermore, it was found that isolated mandibular fractures occurred more frequently in younger patients, whereas midface fractures of the Le Fort II and III types were more commonly observed in individuals under the influence of alcohol at the time of the event. Moreover, accidents involving alcohol consumption were associated with a higher incidence of concomitant cranio-cerebral injuries. Conclusions: Defining the profile of maxillofacial fractures resulting from bicycle accidents constitutes a clinically relevant issue. Additionally, identifying the main risk factors and developing preventive measures is of critical importance. Full article

Background: Newborns with Pierre Robin Sequence (PRS) usually show varying degrees of upper airway obstruction and difficulty feeding due to severe micrognatia. Mandibular distraction osteogenesis has become popular as an alternative treatment option when other medical or surgical techniques are unsatisfactory. The aim of this study is to test a three-dimensional (3D) cephalometric method in computed tomography (CT) to measure effective mandibular and midface length, and maxillomandibular ratio (Md/Mx ratio), as a mode of growth normalization expression in PRS patients before and after Fast and Early Mandibular Osteo-distraction (FEMOD), for assessing the diagnostic method and the efficacy of surgical treatment. Methods: In this retrospective pilot study, six PRS patients treated via the FEMOD surgical protocol were included. The measurements of effective maxillary and mandibular length were performed on 3D reconstructions from pre-surgical (T1) and post-surgical CT (T2). The growth disparity between the mandible and the maxilla was verified in T1 and was compared with the measurements obtained from the adaptation of the McNamara Norms; the correction of growth disproportion after FEMOD was assessed. Results: In T1, the PRS patients’ mandibular length and the Md/Mx ratio were smaller than the expected mandibular length (p = 0.029) and the expected Md/Mx ratio (p = 0.028). In T2, the PRS patients’ mandibular length and the Md/Mx ratio did not show significant differences from the expected results (p = 0.461 and p = 0.400). Conclusions: The 3D cephalometric analysis identifies the disproportion in pre-surgical maxillomandibular growth between PRS and reference measurements, and demonstrates that FEMOD allows the achievement of proportionality in the growth of the maxillomandibular complex in PRS patients. Full article

Background: Treacher Collins Syndrome (TCS) is a rare, congenital craniofacial syndrome. Its most characteristic feature is mandibular and midface hypoplasia. Due to malformations of the facial skeleton, airway abnormalities can also be observed, predisposing individuals to obstructive sleep apnoea (OSA). OSA in TCS may contribute to significant morbidity, including developmental delays, cardiovascular disorders and reduced quality of life. Objectives: This narrative review aims to present the true prevalence of OSA and the treatment options for TCS patients. Additionally, the pathophysiology and diagnostic tools for this condition were briefly outlined. Methods: The literature search included publications from PubMed, Scopus, Web of Science and Cochrane Library. The chosen period of time for these publications was 2000–2024. Results: The results showed that OSA is a serious problem among TCS patients. Although there is no standardised treatment protocol, the primary methods often include mandibular distraction osteogenesis (MDO) and continuous positive airway pressure (CPAP). Approaches such as hypoglossal nerve stimulation (HNS) need further investigation, especially with longitudinal observations. Conclusions: The development of treatment options seems to be promising, suggesting a favourable outlook for standardising the treatment protocols. Full article

Background/Objectives: Patients with syndromic craniosynostosis (SC) pose a significant challenge for post-operational outcomes due to the variability in craniofacial deformities and gain-of-function characteristics. This study aims to develop validated predictive tools using stable cranial base variables to predict changes in the midfacial region and explore the craniofacial morphology among patients with SC. Methods: This study involved 17 SC patients under 12 years old, 17 age-matched controls for morphological analysis, and 21 normal children for developing craniofacial predictive models. A stable cranial base and changeable midfacial variables were analyzed using the Mann–Whitney U test. Pearson correlation identified linear relationships between the midface and cranial base variables. Multicollinearity was checked before fitting the data with multiple linear regression for growth prediction. Model adequacy was confirmed and the 3-fold cross-validation ensured results reliability. Results: Patients with SC exhibited a shortened cranial base, particularly in the middle cranial fossa (S-SO), and a sharper N-S-SO and N-SO-BA angle, indicating a downward rotation and kyphosis. The midface length (ANS-PNS) and zygomatic length (ZMs-ZTi) were significantly reduced, while the midface width (ZFL-ZFR) was increased. Regression models for the midface length, width, and zygomatic length were given as follows: ANS-PNS = 23.976 + 0.139 S-N + 0.545 SO-BA − 0.120 N-S-BA + 0.078 S-SO-BA + 0.051 age (R² = 0.978, RMSE = 1.058); ZFL-ZFR = −15.618 + 0.666 S-N + 0.241 N-S-BA + 0.155 S-SO-BA + 0.121 age (R² = 0.903, RMSE = 3.158); and ZMs-ZTi = −14.403 + 0.765 SO-BA + 0.266 N-S-BA + 0.111 age (R² = 0.878, RMSE = 3.720), respectively. Conclusions: The proposed models have potential applications for midfacial growth estimation in children with SC. Full article