Search Results (33)

Multifunctional membranes capable of simultaneously separating oil–water emulsions and removing organic dyes from complex aqueous systems have garnered considerable attention in recent years. However, the facile fabrication of high-performance membranes that integrate both separation and adsorption functions remains a significant challenge. Herein, we report the fabrication of a polyacrylonitrile/polyvinyl alcohol–chitosan (PAN/PVA-CS) bilayer membrane with asymmetric wettability via electrospinning. The micro/nanostructures and surface wettability of the as-prepared membranes were precisely tailored by modulating the chitosan (CS) concentration. The resultant PAN/PVA-CS membrane exhibited an overall separation efficiency exceeding 97.5% for mechanically emulsified samples. Notably, the PVA-CS layer demonstrated superhydrophilicity and excellent underwater oleophobicity, enabling the gravity-driven simultaneous separation of oil-in-water emulsions and adsorption of water-soluble Congo red dye without requiring external pressure. The maximum adsorption capacity for Congo red reached 61.3 mg g⁻¹, surpassing that of numerous reported membrane-based and adsorbent materials. Concurrently, the hydrophobic PAN layer in the bilayer structure enabled the separation of water-in-oil emulsions. Overall, this work provides a promising strategy for the rational design of asymmetrically wettable multifunctional membranes with great potential for practical application in the purification of complex industrial wastewater containing both emulsified oils and soluble organic dyes. Full article

The most recent research has demonstrated that oscillatory nano-structures found on the lumenal walls of deep cerebral veins likely contribute significantly to the regulation of the function of deep cerebral veins. The oscillatory nano-structures consist of very small, intricately organized “nanoflaps,” each consisting of a hinge element with an attached lipid bilayer architecture. These nanoflaps have distinct mechanical properties, are in close proximity to mechanically sensitive protein assemblies, and therefore it is hypothesized that the nanoflaps generate rhythmic oscillations that control the distribution of both pressure and fluid flow through the veins and also regulate the metabolic condition of the surrounding tissue. In addition, the behavior of the nanoflaps indicate that there exists a hitherto unappreciated level of venous biomechanics at the nanometer scale that regulates the hydraulic stability of the veins and may also contribute to the structural integrity of the surrounding tissues. The purpose of this review is to provide a theoretical framework for understanding the recent discoveries of the structure, oscillation and hydrodynamic effects of nanoflaps, including resonance drift, waveform irregularity, and multi-scale biomechanical interactions. Additionally, this review will present the idea that disruption of the normal oscillatory processes that occur in the nanoflaps may lead to the development of abnormal micro-environments in the early stages of neurodegenerative diseases, abnormalities of compliance, dysautonomic states, traumatic injury and micro-circulatory stress. Finally, this review will describe several pharmacological strategies that may be used to stabilize the oscillations generated by the nanometer-scale oscillatory nano-structure by modifying the torque applied to the hinge, the viscoelasticity of the membrane and the feedback pathways for mechanotransduction. Full article

Access to clean water remains a critical global challenge, particularly in arid and fog-rich regions where conventional resources are limited. Fog water harvesting has emerged as a low-energy alternative; however, the performance of traditional collectors (typically 3–10 L m⁻² day⁻¹) remains constrained by inefficient droplet capture and transport. This review provides a systematic and critical analysis of recent advances in membrane-based fog harvesting technologies, focusing on material design, surface engineering, and structural optimization. The analysis shows that nanostructured and electrospun membrane systems can enhance water collection rates to ~20–60 L m⁻² day⁻¹, representing up to a 5–6 times improvement over conventional meshes. Furthermore, biomimetic and Janus wettability designs significantly improve droplet nucleation and directional transport, while hierarchical micro/nanostructures accelerate coalescence and runoff dynamics. At the structural level, optimized collector geometries (vertical harp designs) demonstrate ~3–4 times higher collection efficiency compared to traditional Raschel mesh due to reduced clogging and enhanced drainage. Despite these advances, key challenges remain, including material durability, fouling resistance, lack of standardized testing protocols, and limited large-scale validation. This review identifies critical design–performance relationships and proposes a framework linking surface wettability, morphology, and environmental parameters to harvesting efficiency. Future directions emphasize the development of durable, scalable membrane systems and the integration of fog harvesting with hybrid water supply technologies. Full article

RNA-based interventions are particularly promising for next-generation therapeutic strategies and hold significant potential when integrated with diagnostic modalities. Among noncoding RNAs, microRNAs (miRNAs) regulate gene expression post-transcriptionally and represent compelling targets for cancer therapy. However, their clinical translation remains hindered by instability, off-target effects, and limited delivery efficiency. Here, we report the microfluidic synthesis of hybrid lipid–polymer nanoparticles (LiPoNs) that co-deliver an AntimiR-21 and the magnetic resonance imaging contrast agent gadolinium diethylenetriamine penta-acetic acid (Gd-DTPA). The LiPoNs were obtained using coupled Hydrodynamic Flow Focusing (cHFF), enabling precise control over lipid–polymer self-assembly and surpassing the compositional limitations reported with conventional micromixers. The resulting AntimiR-21–Gd-DTPA–LiPoNs exhibited an average hydrodynamic diameter of 124 nm, narrow polydispersity (PDI < 0.2), and encapsulation efficiency up to 60%. In MDA-MB-231 breast cancer cells, treatment with AntimiR-21–LiPoNs induced suppression of miR-21 and a corresponding decrease in migratory capacity, demonstrating effective functional delivery and gene expression modulation. These findings establish a versatile microfluidic platform for engineering multifunctional lipid–polymer nanostructures whose hybrid architecture combines the biocompatibility and membrane fusion capability of lipids with the structural robustness and controlled release properties of polymers, thereby advancing RNA-based theranostic design for precision oncology and related applications. Full article

Antibacterial surfaces inspired by biological micro- and nanostructures, such as those found on the wings of cicadas and dragonflies, have attracted interest due to their ability to inhibit bacterial adhesion and damage microbial membranes without relying on chemical agents. However, conventional fabrication techniques like photolithography or nanoimprinting are limited by substrate shape, size, and high operational costs. In this study, we developed a scalable method using atmospheric-pressure low-temperature plasma (APLTP) to fabricate sharp-edged nanospikes on solvent-cast polymethyl methacrylate (PMMA) films. The nanospikes were formed through plasma-induced modification of pores in the film, followed by annealing to control surface wettability while maintaining structural sharpness. Atomic force microscopy confirmed the formation of micro/nanostructures, and contact angle measurements revealed reversible hydrophilicity. Antibacterial performance was evaluated against Escherichia coli using ISO 22196 standards. While the film with only plasma treatment reduced bacterial colonies by 30%, the film annealed after plasma treatment achieved an antibacterial activity value greater than 5, with bacterial counts below the detection limit (<10 CFU). These findings demonstrate that APLTP offers a practical route for large-area fabrication of biomimetic antibacterial coatings on flexible polymer substrates, holding promise for future applications in healthcare, packaging, and public hygiene. Full article

The increasing prevalence of antibiotic-resistant bacteria has intensified the need for innovative antibacterial surfaces, particularly in biomedical applications. Traditional approaches often rely on chemical agents alone, which may lead to diminishing efficacy over time. To address this, we investigated the development of a novel antibacterial surface by combining the inherent antimicrobial properties of copper with an engineered surface topography on a biopolymer matrix. A copper–poly-L-lactic acid (Cu-PLLA) composite system was fabricated using sputtering deposition followed by controlled thermal treatment to induce wrinkle-like micro- and nanostructures on the surface. The surface morphology was characterized using scanning electron microscopy (SEM) and atomic force microscopy (AFM), confirming the formation of hierarchical wrinkle patterns. The chemical composition and distribution of copper were analyzed via energy-dispersive X-ray spectroscopy (EDS). Antibacterial performance was assessed against both Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus using standard colony count reduction assays. The Cu-PLLA wrinkled surfaces demonstrated significantly enhanced bactericidal activity compared with flat PLLA and copper-free controls, a finding attributed to a synergistic effect of mechanical membrane disruption and copper-mediated chemical toxicity. These findings suggest that biopolymer–metal hybrid surfaces with engineered topography offer a promising strategy for developing next-generation antibacterial materials suitable for biomedical and clinical use. Full article

Polymers with micro- and mesoporous structure are promising as materials for gas storage and separation, encapsulating agents for controlled drug release, carriers for catalysts and sensors, precursors of nanostructured carbon materials, carriers for biomolecular immobilization and cellular scaffolds, as materials with a low dielectric constant, filtering/separating membranes, proton exchange membranes, templates for replicating structures, and as electrode materials for energy storage. Sol–gel technologies, track etching, and template synthesis are used for their production, including in micelles of surfactants and microemulsions and sublimation drying. The listed methods make it possible to obtain pores with variable shapes and sizes of 5–50 nm and achieve a narrow pore size distribution. However, all these methods are technologically multi-stage and require the use of consumables. This paper presents a review of the use of macromolecular architecture in the synthesis of micro- and mesoporous polymers with extremely high surface area and hierarchical porous polymers. The synthesis of porous polymer frameworks with individual functional capabilities, the required chemical structure, and pore surface sizes is based on the unique possibilities of developing the architecture of the polymer matrix. Full article

With the inherent demand for hydrophobic materials in processes such as membrane distillation and unidirectional moisture conduction, the preparation and application development of profiles such as modified cellulose acetate membranes that have both hydrophobic functions and biological properties have become a research hotspot. Compared with the petrochemical polymer materials used in conventional hydrophobic membrane preparation, cellulose acetate, as the most important cellulose derivative, exhibits many advantages, such as a high natural abundance, good film forming, and easy modification and biodegradability, and it is a promising polymer raw material for environmental purification. This paper focuses on the research progress of the hydrophobic cellulose acetate preparation process and its current application in the water-treatment and resource-utilization fields. It provides a detailed introduction and comparison of the technical characteristics, existing problems, and development trends of micro- and nanostructure and chemical functional surface construction in the hydrophobic modification of cellulose acetate. Further review was conducted and elaborated on the applications of hydrophobic cellulose acetate membranes and other profiles in oil–water separation, brine desalination, water-repellent protective materials, and other separation/filtration fields. Based on the analysis of the technological and performance advantages of profile products such as hydrophobic cellulose acetate membranes, it is noted that key issues need to be addressed and urgently resolved for the further development of hydrophobic cellulose acetate membranes. This will provide a reference basis for the expansion and application of high-performance cellulose acetate membrane products in the environmental field. Full article

The progress in polymer science and nanotechnology yields new colloidal and macromolecular objects and their combinations, which can be defined as complex polymer materials. The complexity may include a complicated composition and architecture of macromolecular chains, specific intermolecular interactions, an unusual phase behavior, and a structure of a multi-component polymer-containing material. Determination of a relation between the structure of a complex material, the structure and properties of its constituent elements, and the rheological properties of the material as a whole is the subject of structural rheology—a valuable tool for the development and study of novel materials. This work summarizes the author’s structural–rheological studies of complex polymer materials for determining the conditions and rheo-manifestations of their micro- and nanostructuring. The complicated chemical composition of macromolecular chains and its role in polymer structuring via block segregation and cooperative hydrogen bonds in melt and solutions is considered using tri- and multiblock styrene/isoprene and vinyl acetate/vinyl alcohol copolymers. Specific molecular interactions are analyzed in solutions of cellulose; its acetate butyrate; a gelatin/carrageenan combination; and different acrylonitrile, oxadiazole, and benzimidazole copolymers. A homogeneous structuring may result from a conformational transition, a mesophase formation, or a macromolecular association caused by a complex chain composition or specific inter- and supramolecular interactions, which, however, may be masked by macromolecular entanglements when determining a rheological behavior. A heterogeneous structure formation implies a microscopic phase separation upon non-solvent addition, temperature change, or intense shear up to a macroscopic decomposition. Specific polymer/particle interactions have been examined using polyethylene oxide solutions, polyisobutylene melts, and cellulose gels containing solid particles of different nature, demonstrating the competition of macromolecular entanglements, interparticle interactions, and adsorption polymer/particle bonds in governing the rheological properties. Complex chain architecture has been considered using long-chain branched polybutylene-adipate-terephthalate and polyethylene melts, cross-linked sodium hyaluronate hydrogels, asphaltene solutions, and linear/highly-branched polydimethylsiloxane blends, showing that branching raises the viscosity and elasticity and can result in limited miscibility with linear isomonomer chains. Finally, some examples of composite adhesives, membranes, and greases as structured polymeric functional materials have been presented with the demonstration of the relation between their rheological and performance properties. Full article

In this nanotechnology era, nanostructures play a crucial role in the investigation of novel functional nanomaterials. Complex nanostructures and their corresponding fabrication techniques provide powerful tools for the development of high-performance functional materials. In this study, advanced micro-nanomanufacturing technologies and composite micro-nanostructures were applied to the development of a new type of pharmaceutical formulation, aiming to achieve rapid hemostasis, pain relief, and antimicrobial properties. Briefly, an approach combining a electrohydrodynamic atomization (EHDA) technique and reversed-phase solvent was employed to fabricate a novel beaded nanofiber structure (BNS), consisting of micrometer-sized particles distributed on a nanoscale fiber matrix. Firstly, Zein-loaded Yunnan Baiyao (YB) particles were prepared using the solution electrospraying process. Subsequently, these particles were suspended in a co-solvent solution containing ciprofloxacin (CIP) and hydrophilic polymer polyvinylpyrrolidone (PVP) and electrospun into hybrid structural microfibers using a handheld electrospinning device, forming the EHDA product E3. The fiber-beaded composite morphology of E3 was confirmed through scanning electron microscopy (SEM) images. Fourier-transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) analysis revealed the amorphous state of CIP in the BNS membrane due to the good compatibility between CIP and PVP. The rapid dissolution experiment revealed that E3 exhibits fast disintegration properties and promotes the dissolution of CIP. Moreover, in vitro drug release study demonstrated the complete release of CIP within 1 min. Antibacterial assays showed a significant reduction in the number of adhered bacteria on the BNS, indicating excellent antibacterial performance. Compared with the traditional YB powders consisting of Chinese herbs, the BNS showed a series of advantages for potential wound dressing. These advantages include an improved antibacterial effect, a sustained release of active ingredients from YB, and a convenient wound covering application, which were resulted from the integration of Chinese herbs and Western medicine. This study provides valuable insights for the development of novel multiscale functional micro-/nano-composite materials and pioneers the developments of new types of medicines from the combination of herbal medicines and Western medicines. Full article

The electrocatalytic oxidation of glycerol by metal electrocatalysts is an effective method of low-energy-input hydrogen production in membrane reactors in alkaline conditions. The aim of the present study is to examine the proof of concept for the gamma-radiolysis-assisted direct growth of monometallic gold and bimetallic gold–silver nanostructured particles. We revised the gamma radiolysis procedure to generate free-standing Au and Au-Ag nano- and micro-structured particles onto a gas diffusion electrode by the immersion of the substrate in the reaction mixture. The metal particles were synthesized by radiolysis on a flat carbon paper in the presence of capping agents. We have integrated different methods (SEM, EDX, XPS, XRD, ICP-OES, CV, and EIS) to examine in detail the as-synthesized materials and interrogate their electrocatalytic efficiency for glycerol oxidation under baseline conditions to establish a structure–performance relationship. The developed strategy can be easily extended to the synthesis by radiolysis of other types of ready-to-use metal electrocatalysts as advanced electrode materials for heterogeneous catalysis. Full article

Membrane distillation (MD) is attractive for water reclamation due to the fact of its unique characteristics. However, membrane wetting becomes an obstacle to its further application. In this paper, a novel hydrophobic polyvinylidene fluoride/poly(vinyl pyrrolidone) (PVDF/PVP) membrane was fabricated by electrospinning and solvothermal treatment. The electrospun membranes prepared by electrospinning showed a multilevel interconnected nanofibrous structure. Then, a solvothermal treatment introduced the micro/nanostructure to the membrane with high roughness (Ra = 598 nm), thereby the water contact angle of the membrane increased to 158.3 ± 2.2°. Owing to the superior hydrophobicity, the membrane presented high resistance to wetting in both NaCl and SDS solutions. Compared to the pristine PVDF membrane, which showed wetting with a flux decline (120 min for 0.05 mM surfactant solution treatment), the prepared membrane showed outstanding stability over 600 min, even in 0.2 mM surfactant solutions. These results confirm a simple method for anti-wetting hydrophobic membrane preparation, which presented universal significance to direct contact membrane distillation (DCMD) for industrial application. Full article

Poly(ionic liquid)-based membranes have been the subject of intensive research in the last 15 years due to their potential for the separation of CO₂ from other gases. In this short review, different types of PIL-based membranes for CO₂ separation are described (neat PIL membranes; PIL-IL composite membranes; PIL-polymer blend membranes; PIL-based block copolymer membranes, and PIL-based mixed matrix membranes), and their state-of-the-art separation results for different gas pairs (CO₂/N₂, CO₂/H₂, and CO₂/CH₄) are presented and discussed. This review article is focused on the most relevant research works performed over the last 5 years, that is, since the year 2017 onwards, in the field of poly(ionic liquid)-based membranes for CO₂ separation. The micro- and nano-morphological characterization of the membranes is highlighted as a research topic that requires deeper study and understanding. Nowadays there is an array of advanced structural characterization techniques, such as neutron scattering techniques with contrast variation (using selective deuteration), that can be used to probe the micro- and nanostructure of membranes, in length scales ranging from ~1 nm to ~15 μm. Although some of these techniques have been used to study the morphology of PIL-based membranes for electrochemical applications, their use in the study of PIL-based membranes for CO₂ separation is still unknown. Full article

Odor detection and discrimination in mammals is known to be initiated by membrane-bound G-protein-coupled receptors (GPCRs). The role that the lipid membrane may play in odor discrimination, however, is less well understood. Here, we used model membrane systems to test the hypothesis that phospholipid bilayer membranes may be capable of odor discrimination. The effect of S-carvone, R-carvone, and racemic lilial on the model membrane systems was investigated. The odorants were found to affect the fluidity of supported lipid bilayers as measured by fluorescence recovery after photobleaching (FRAP). The effect of odorants on surface-supported lipid multilayer microarrays of different dimensions was also investigated. The lipid multilayer micro- and nanostructure was highly sensitive to exposure to these odorants. Fluorescently-labeled lipid multilayer droplets of 5-micron diameter were more responsive to these odorants than ethanol controls. Arrays of lipid multilayer diffraction gratings distinguished S-carvone from R-carvone in an artificial nose assay. Our results suggest that lipid bilayer membranes may play a role in odorant discrimination and molecular recognition in general. Full article

Antibacterial properties of engineered materials are important in the transition to a circular economy and societal security, as they are central to many key industrial areas, such as health, food, and water treatment/reclaiming. Nanocoating and electrospinning are two versatile, simple, and low-cost technologies that can be combined into new advanced manufacturing approaches to achieve controlled production of innovative micro- and nano-structured non-woven membranes with antifouling and antibacterial properties. The present study investigates a rational approach to design and manufacture electrospun membranes of polysulfone (PSU) with mechanical properties optimized via combinatorial testing from factorial design of experiments (DOE) and endowed with antimicrobial silver (Ag) nanocoating. Despite the very low amount of Ag deposited as a conformal percolating nanocoating web on the polymer fibers, the antimicrobial resistance assessed against the Gram-negative bacteria E. coli proved to be extremely effective, almost completely inhibiting the microbial proliferation with respect to the reference uncoated PSU membrane. The results are relevant, for example, to improve antifouling behavior in ultrafiltration and reverse osmosis in water treatment. Full article