Search Results (14)

The electrochemical CO₂ reduction (eCO₂RR) to valuable chemicals offers a promising method to combat global warming by recycling carbon. Among the possible products, syngas—a CO and H₂ mixture—is especially valuable for industrial reactions. The use of Room Temperature Ionic Liquids (RTILs) electrolytes presents a promising pathway for eCO₂RR because of the lower overpotential required and the increased CO₂ solubility with respect to the aqueous ones. Ensuring a constant CO/H₂ production is essential, and it relies on both the catalyst and reactor design. This study explores eCO₂RR in RTIL mixtures of 1-butyl-3-methyl imidazolium trifluoromethanesulfonate (good for CO₂ conversion) and 1-butyl-3-methyl imidazolium acetate (good for CO₂ capture), with various amounts of water as a proton source. We evaluated syngas production stability across different electrochemical cells and ion exchange membranes after determining the appropriate electrolyte mixture for a suitable CO/H₂ ratio near 1:1. The two-chamber cell configuration outperformed single-cell designs by reducing oxidative RTILs degradation and by-products formation. Using a bipolar membrane (BPM) in forward mode led to catholyte acidification, causing an increase of HER relative to eCO₂RR over time, confirmed by Multiphysics modeling. Conversely, an anionic exchange membrane (AEM) maintained constant syngas production over extended periods. This work offers guidelines for syngas generation in RTIL-based systems from waste-CO₂ reduction, which can be useful for other green chemical synthesis processes. Full article

The complex structure of aminobenzylnaphthols can be easily obtained with the useful Betti reaction. These valuable compounds can give rise to chiral intermediates, that found wide application in asymmetric synthesis. 1-[(1S)-(4-Fluorophenyl)-((1′S)-1′-naphthalen-1-yl-ethylamino)-methyl]-naphthalen-2-ol 1 was treated with triflic anhydride to yield the corresponding (S,S)-triflate 2, which is a valuable intermediate in the future synthesis of aminophosphine, to be used in asymmetric catalysis. Preliminarily structural considerations based upon H(1)-NMR spectroscopy are also reported. Full article

Optically active dialkoxyisopropylsulfonium salts were obtained by methylation (ethylation) of optically active alkyl isopropanesulfinates using methyl (ethyl) trifluoromethanesulfonate. Alkaline hydrolysis of a series of methoxy(alkoxy)sulfonium salts afforded the two sulfinate products methyl isopropanesulfinate and alkyl isopropanesulfinate, both formed with a slightly prevailing inversion of configuration at the sulfur atom. DFT calculations revealed that this substitution reaction proceeded stepwise according to an addition-elimination (A–E) mechanism involving the formation of high tetracoordinate S^IV sulfurane intermediates. In addition, the DFT calculations showed that recombination of the hydroxy anion with the methoxy(alkoxy)sulfonium cation—leading to the parallel formation of the two most stable primary sulfuranes, with the hydroxy and alkoxy groups in apical positions and their direct decomposition—is the most energetically favorable pathway. Full article

We investigated the effects of water absorption on the dynamic mechanical properties of poly(methyl methacrylate) doped with various generic lithium salts, such as lithium perchlorate trihydrate (LiClO₄), lithium trifluoromethanesulfonate (LiCF₃SO₃), lithium nonafluorobutanesulfonate (LiC₄F₉SO₃), and lithium bis(trifluoromethanesulfonyl)imide (LiN(CF₃SO₂)). The rates of weight change during water absorption of lithium salt-doped samples were higher in the following order: LiClO₄, LiCF₃SO₃, LiC₄F₉SO₃, and LiN(CF₃SO₂). Interestingly, the aforementioned order was the same as the order of the terminal relaxation times in the flow region of the viscoelastic measurement in the melting-state. This implies that the water absorption of the salt-doped PMMA occurs due to the factors that affect the pinning of the PMMA molecular chains in the places. Full article

Methyl trifluoromethanesulfonate was found to catalyze the reaction of the nucleophilic substitution of the hydroxyl group of alcohols by N-heterocycles followed by X- to N- alkyl group migration (X = O, S) to obtain N-functionalized benzoxazolone, benzothiazolethione, indoline, benzoimidazolethione and pyridinone derivatives. A high degree of solvent dependency on the yield of the products was observed during optimization of the reaction parameters. The yield of the product was found to be 0%, 48% and 70% in acetonitrile, 1,2-dichloroethane and chloroform, respectively. The mechanism of the reaction was established through experiments as well as DFT calculations. The functional B3LYP and 6-311++G(d) basis function sets were used to optimize the molecular geometries. D3 Grimme empiric dispersion with Becke–Johnson dumping was employed, and harmonic vibrational frequencies were calculated to characterize the stationary points on the potential energy surface. To ensure that all the stationary points were smoothly connected to each other, intrinsic reaction coordinate (IRC) analyses were performed. The influence of solvents was considered using the solvation model based on density (SMD). The free energy profiles of the mechanisms were obtained with vibrational unscaled zero-point vibrational energy (ZPE), thermal, enthalpy, entropic and solvent corrections. Full article

Herein, we report the first synthesis of covalent triazine-based frameworks (CTFs) based on a hexanitrile monomer, namely the novel pseudo-octahedral hexanitrile 1,4-bis(tris(4′-cyano-phenyl)methyl)benzene 1 using both ionothermal reaction conditions with ZnCl₂ at 400 °C and the milder reaction conditions with the strong Brønsted acid trifluoromethanesulfonic acid (TFMS) at room temperature. Additionally, the hexanitrile was combined with different di-, tri-, and tetranitriles as a second linker based on recent work of mixed-linker CTFs, which showed enhanced carbon dioxide captures. The obtained framework structures were characterized via infrared (IR) spectroscopy, elemental analysis, scanning electron microscopy (SEM), and gas sorption measurements. Nitrogen adsorption measurements were performed at 77 K to determine the Brunauer-Emmett-Teller (BET) surface areas range from 493 m²/g to 1728 m²/g (p/p₀ = 0.01–0.05). As expected, the framework CTF-hex6 synthesized from 1 with ZnCl₂ possesses the highest surface area for nitrogen adsorption. On the other hand, the mixed framework structure CTF-hex4 formed from the hexanitrile 1 and 1,3,5 tricyanobenzene (4) shows the highest uptake of carbon dioxide and methane of 76.4 cm³/g and 26.6 cm³/g, respectively, at 273 K. Full article

The synthesis of naproxen-containing diaryliodonium salts has been realized from naproxen methyl ester and ArI(OH)OTs activated by trimethylsilyl trifluoromethanesulfonate (TMSOTf) in a solvent mixture comprising dichloromethane and 2,2,2-trifluoroethanol (TFE). Those iodonium salts have been successfully used in the functionalization of an aromatic ring of naproxen methyl ester, including fluorination, iodination, alkynylation, arylation, thiophenolation, and amination and esterification reactions. Moreover, further hydrolysis of the obtained 5-iodo-naproxen methyl ester afforded 5-iodo-naproxen. Full article

Composites of montmorillonite K10 (MMT K10) and ionic liquid (IL) containing a 1-butyl-3-methyl-imidazolium cation ([BMIm]⁺) and various anions, such as bis (trifluoromethylsulfonyl) imide ([NTf₂]⁻), trifluoromethanesulfonate ([OTf]⁻), and dicyanamide ([DCA]⁻) have been obtained in this work. A number of methods, such as dynamic light scattering (DLS), scanning electron microscopy (SEM), X-ray diffraction (XRD), thermal gravimetry (TG), differential scanning calorimetry (DSC), Fourier-transform infrared (FTIR) spectroscopy, and nitrogen adsorption–desorption have been used to characterize clay, and to study the structure and thermal behaviour of the composites. It has been found that the MMT K10 powder has a narrow particle size distribution with a peak at 246 nm and a mesoporous structure (S_BET=195 m²/g). According to the FTIR spectra, MMT K10/IL interaction depends on the IL type. It has been identified that confined ionic liquid interacts with both clay and adsorbed water in accordance with the hydrophilicity and size of the anion, in the following order: [DCA]⁻ > [OTf]⁻ > [NTf₂]⁻. Characteristic temperatures of glass transition, crystallization, and melting have been determined for the ionic liquids under study and their MMT K10 composites. It has been revealed that when IL is adsorbed on the surface of clay, the phase transitions in IL change. The greatest changes are observed in the case of BMImNTf₂. By applying the method of thermogravimetric analysis, it is shown that composite formation is accompanied by a decrease in the IL thermal stability. Apparently, the highly developed surface of montmorillonite K10, obtained by acid treatment, plays a major role in the decrease in the IL’s thermal stability. The influence of the IL anion on the thermal and spectral characteristics of an MMT K10/IL composite was studied for the first time. Full article

The interfacial interactions between ionic liquids (1,3-dimethylimidazolium methyl sulfate and 1-ethyl-3-methylimidazolium trifluoromethanesulfonate) and solid surfaces (mesoporous aluminum oxide and mica) have been studied by infrared spectroscopy at high pressures (up to 2.5 GPa). Under ambient pressure, the spectroscopic features of pure ionic liquids and mixtures of ionic liquids/solid particles (Al₂O₃ and mica) are similar. As the pressure is increased, the cooperative effect in the local structure of pure 1,3-dimethylimidazolium methyl sulfate becomes significantly enhanced as the imidazolium C–H absorptions of the ionic liquid are red-shifted. However, this pressure-enhanced effect is reduced by adding the solid particles (Al₂O₃ and mica) to 1,3-dimethylimidazolium methyl sulfate. Although high-pressure IR can detect the interactions between 1,3-dimethylimidazolium methyl sulfate and particle surfaces, the difference in the interfacial interactions in the mixtures of Al₂O₃ and mica is not clear. By changing the type of ionic liquid to 1-ethyl-3-methylimidazolium trifluoromethanesulfonate, the interfacial interactions become more sensitive to the type of solid surfaces. The mica particles in the mixture perturb the local structure of 1-ethyl-3-methylimidazolium trifluoromethanesulfonate under high pressures, forcing 1-ethyl-3-methylimidazolium trifluoromethanesulfonate to form into an isolated structure. For Al₂O₃, 1-ethyl-3-methylimidazolium trifluoromethanesulfonate tends to form an associated structure under high pressures. Full article

A series of compounds, featuring an ethenylic bridge and quinoline and isoquinoline end capping units possessing systematically varied substitution patterns, were prepared as molecular materials for electrochromic applications. The different structures were optimized in order to maximize the electrochromic contrast in the visible region, mostly by achieving a completely UV-absorbing oxidized state. Density functional theory (DFT) calculations are exploited in order to rationalize the correlation between the molecular structure, the functional groups’ electronic properties, and the electrochemical behavior. It is shown that the molecular planarity (i.e. ring/ring π conjugation) plays a major role in defining the mechanism of the electrochemical charge transfer reaction, while the substituent’s nature has an influence on the LUMO energy. Among the compounds here studied, the (E)-10-methyl-9-(2-(2-methylisoquinolinium-1-yl)-vinyl)-1,2,3,4-tetrahydroacri-dinium trifluoromethanesulfonate derivative shows the most interesting properties as an electrochromophore. Full article

The trimethylsilyl trifluoromethanesulfonate (TMSOTf)-catalyzed reaction of methyl 6-hydroxyhexanoate with 3-O-benzyl-4-(2,4-di-O-acetyl-3-deoxy-L-glycero-tetronamido)-4,6-dideoxy-2-O-levulinoyl-α-d-mannopyranosyl trichloroacetimidate followed by a two-step deprotection (hydrogenolysis over Pd/C catalyst and Zemplén deacylation, to simultaneously remove the acetyl and levulinoyl groups) gave 5-(methoxycarbonyl)pentyl 4-(3-deoxy-L-glycero-tetronamido)-4,6-dideoxy-α-D-mannopyranoside. The structure of the latter, for which crystals were obtained in the analytically pure state for the first time, followed from its NMR and high-resolution mass spectra and was confirmed by X-ray crystallography. The molecule has two approximately linear components; a line through the aglycon intersects a line through the mannosyl and tetronylamido groups at 120°. The crystal packing separates the aglycon groups from the tetronylamido and mannosyl groups, with only C-H…O hydrogen bonding among the aglycon groups and N-H…O, O-H…O and C-H…O links among the tetronylamido and mannosyl groups. A carbonyl oxygen atom accepts the strongest O-H…O hydrogen bond and two strong C-H…O hydrogen bonds. The geometric properties were compared with those of related molecules. Full article

A solvent- and halogen-free synthesis of high purity triflate ionic liquids via direct alkylation of organic bases (amines, phosphines or heterocyclic compounds) with methyl and ethyl trifluoromethanesulfonate (methyl and ethyl triflate) has been developed. Cheap and non-toxic dimethyl and diethyl carbonate serve as source for the methyl and ethyl groups in the preparation of methyl and ethyl triflate by this invented process. The properties of ionic liquids containing the triflate anion are determined and discussed. Full article