Search Results (59,642)

Integrated circuits are the core of a cyber-physical system, where tens of billions of components are integrated into a tiny silicon chip to conduct complex functions. To maximize utilities, the design and manufacturing life cycle of integrated circuits rely on numerous untrustworthy third parties, forming a global supply chain model. At the same time, this model produces unpredictable and catastrophic issues, threatening the security of individuals and countries. As for guaranteeing the security of ultra-highly integrated chips, detecting slight abnormalities caused by malicious behavior in the current and voltage is challenging, as is achieving computability within a reasonable time and obtaining a golden reference chip; however, artificial intelligence can make everything possible. For the first time, this paper presents a systematic review of artificial-intelligence-based integrated circuit security approaches, focusing on the latest attack and defense strategies. First, the security threats of integrated circuits are analyzed. For one of several key threats to integrated circuits, hardware Trojans, existing attack models are divided into several categories and discussed in detail. Then, for summarizing and comparing the numerous existing artificial-intelligence-based defense strategies, traditional and advanced artificial-intelligence-based approaches are listed. Finally, open issues on artificial-intelligence-based integrated circuit security are discussed from three perspectives: in-depth exploration of hardware Trojans, combination of artificial intelligence, and security strategies involving the entire life cycle. Based on the rapid development of artificial intelligence and the initial successful combination with integrated circuit security, this paper offers a glimpse into their intriguing intersection, aiming to draw greater attention to these issues. Full article

The present paper investigates the adoption of green manufacturing approaches among industrial enterprises in Slovakia, emphasizing the interplay between institutional pressures and enterprise-level resources. Based on a survey of 88 enterprises from energy- and material-intensive sectors, the study evaluates how regional context and enterprise size influence the adoption of green practices. Using logistic regression and the chi-squared test, the findings reveal minimal regional variation, suggesting strong isomorphic effects of harmonised European Union environmental regulations. In contrast, enterprise size significantly correlates with the adoption of complex green practices, confirming the relevance of the resource-based view. These results highlight the dominance of internal capabilities over regional factors in green transition pathways within small post-transition economies. The study contributes to cross-national theorising by showing how resource asymmetries, rather than institutional diversity, shape environmental behaviour in uniform regulatory environments. Specifically, the paper examines how institutional pressures, enterprise-level resources, stakeholders, and legitimacy influence the adoption of green manufacturing practices in Slovak industrial enterprises. The study draws on institutional theory, the resource-based view, stakeholder theory, and legitimacy theory to explore the relationship between enterprise size, regional location, and the adoption levels of green manufacturing. Full article

Love wave surface acoustic wave (LSAW) sensors are crystal resonators known for their high potential for biosensing applications due to their high sensitivity, real-time detection, and compatibility with microfluidic systems. Commercial LSAW devices are costly, and manufacturing them is even more expensive, making accessibility a significant challenge. Additionally, their use requires specialized systems, and with only a few manufacturers dominating the market, most available solutions are proprietary, limiting customization and adaptability for specific research needs. In this work, a low-cost open-source LSAW biosensing system prototype was developed based on a commercially acquired resonator. The development integrates microfluidics through a polydimethylsiloxane (PDMS) chip, low-cost electronics, and both 3D printed ultraviolet (UV) resin and polylactic acid (PLA) parts. The instrument used for measurements was a vector network analyzer (VNA) that features open-source software. The code was customized for this study to enable real-time, label-free biosensing. Experimental validation consisted of evaluating the sensitivity and repeatability of the system, from the setup to its use with different fluids. Results demonstrated that the development is able to advance to more complex applications. Full article

Supply chains are increasingly exposed to sudden disruptive events (SDEs) such as natural disasters and trade wars. We develop a multi-stage game-theoretical model to investigate a novel coping mechanism: when a firm is forced to exit the market because of SDEs, the firm can regain profits by licensing its proprietary production tech to a competitor. We find that, compared with the scenario before SDEs, such events can even increase the profit of each manufacturer under certain conditions. Under certain conditions, the cooperative strategy (i.e., supply chain reshaping) yields a higher supply chain system profit than the non-cooperative strategy. After SDEs, the common manufacturer may either accept or reject cooperation, depending on the customer transfer rate and the cooperation cost. Notably, under the cooperation strategy, the high-tech manufacturer extracts part of the common manufacturer’s profit through patent licensing, and the existence of cooperation cost further contributes to a misalignment between the common manufacturer’s optimal decision and the supply chain system optimum. These findings contribute to the literature by identifying a novel supply chain reshaping mechanism driven by patent licensing and offer strategic guidance for firms and policymakers navigating SDE-induced market exits. Full article

This paper proposes a knowledge graph (KG) construction method for a part machining process in response to the low degree of structuring of historical process data association relationships within the enterprise in the field of part machining, which makes it difficult to reuse effectively. The part types are mainly shafts, gears, boxes and other common parts. First, the schema layer of the process knowledge graph was constructed using a top-down approach. Second, deep learning techniques were employed for entity extraction, while knowledge fusion and ontology relationship establishment methods were combined to build the data layer of the process knowledge graph (PKG) from the bottom up. Third, the mapping between the schema layer and data layer was implemented in the Neo4j graph database. Based on the constructed process KG, process route recommendation and rapid retrieval of process information were thus accomplished. Finally, a shaft part was used as the target part to verify the effectiveness of the proposed method. In over 300 trials, the similarity-based recommendation model achieved a hit rate of 91.7% (the target part’s route appeared in the recommended list in 91.7% of cases). These results indicate that the proposed machining PKG construction is feasible and can assist in process planning, potentially improving the efficiency of retrieving and reusing machining knowledge. Full article

It is recognized that boats which intervene in dangerous situations are characterized by high maneuverability, have good governance properties, and must be equipped with high-speed propellers. This paper proposes a computerized analysis, using Computational Fluid Dynamics modeling, of a high-speed propeller, in open water, from the perspective of velocity and pressure manifested on the propeller blades. The use of numerical methods allows to determine the thrust forces on the propellers, to highlight the areas in the propeller blade where the maximum and minimum pressures occur, to identify the cavitation zone and to visualize the degree of turbulence of the fluid flow on the propeller blades in rotational motion. The analysis proves to be an efficient procedure in determining the characteristics of a high-speed propeller before deciding its production/manufacture. The Shear Stress Transport method was used for fluid turbulence analysis and the “Thrust–Propeller RPM” diagram and “Torque–propeller RPM” diagram finalized this study, the mentioned diagrams being the most important in choosing an efficient propeller for a given boat. Full article

We experimentally demonstrate high-resolution imaging using micro-objectives fabricated by two-photon polymerization (2PP) lithography, highlighting its potential as a flexible and precise fabrication method. The 2PP manufacturing process offers the ability to develop micro-optics with customized geometries and material properties, including tailored refractive indices. This flexibility introduces new degrees of freedom in optical system design and expands the applicability of micro-optics to advanced imaging tasks where other materials and fabrication methods are insufficient. For our study, bi-convex micro-optics with different geometries with radii of curvature of <15 $\mathsf{\mu }$m and minimized contact areas (<1 $\mathsf{\mu }$m${}^2$) to ensure easy release from the substrate were fabricated with 2PP and investigated for their optical performance. With these micro-optics, the tracks with a pitch of 320 nm and the pits and lands as small as 130 nm were successfully resolved on a BluRay disc surface, demonstrating for the first time the high-resolution imaging capabilities of bi-convex spherical micro lenses. Full article

Background/Objectives: The pain associated with invasive procedures is one of the most common experiences in the pediatric population. Its management remains insufficient due to gaps in healthcare training and knowledge. The aim of this study was to analyze the attitudes, beliefs, care practices, and training of healthcare professionals in relation to pediatric pain, through the development and application of the questionnaire ‘Humanisation of Pediatric Care in Pain Management with a Non-Pharmacological Approach (HUPEDCARE-Q)’. Methods: A cross-sectional, observational, and descriptive study with a quantitative approach was conducted to validate a questionnaire. The process was carried out in three phases: (1) design and initial development of the instrument; (2) evaluation of content validity through expert judgment, using the Content Validity Coefficient (CVC); (3) administration of the questionnaire to a large sample of healthcare professionals to assess its internal consistency and psychometric structure. Results: The evaluation involved five experts, and the items were assessed using the Content Validity Coefficient (CVC), with the overall CVC of the questionnaire exceeding 0.80. The average item scores given by the experts ranged from 0.88 to 0.95, indicating a high level of agreement in their evaluations. The results showed statistically significant positive correlations among most items (p < 0.001), indicating adequate internal consistency. Conclusions: The content validation and pilot study confirmed the theoretical relevance and appropriateness of the HUPEDCARE-Q questionnaire items in the Spanish context. The results support its usefulness as a valid and reliable tool to identify attitudes, beliefs, knowledge, and training needs in the humanized management of pediatric pain. Full article

This study investigates the interplay between infill structure and surface texture in Fused Deposition Modeling (FDM)-printed polymer specimens and their combined influence on tribological and mechanical performance. Unlike previous works that focus on single-variable analysis, this work offers a comparative evaluation of Shore D hardness and coefficient of friction (COF) for PLA and Iglidur materials, incorporating diverse infill patterns. The results reveal that specific combinations (e.g., grid infill with 90% density) optimize hardness and minimize friction, offering practical insights for design optimization in functional parts. Our aim is to provide design insights for enhanced wear resistance and hardness through tailored structural configurations. Carbon Fiber-reinforced PLA (PLA CF), aramid fiber-reinforced Acrylonitrile Styrene Acrylate (Kevlar), and Iglidur I180-BL tribofilament. Disc specimens were fabricated with gyroid infill densities ranging from 10% to 100%. Experimental methodologies included Ball-on-Disc tests conducted under dry sliding conditions (5 N normal load, 150 mm/s sliding speed) to assess friction and wear characteristics. These tribological evaluations were complemented by profilometric and microscopic analyses and Shore D hardness testing. The results show that Iglidur I180-BL achieved the lowest friction coefficients (0.141–0.190) and negligible wear, while PLA specimens with 90% infill demonstrated a polishing-type wear with minimal material loss and a friction coefficient (COF) of ~0.108. In contrast, PLA CF and Kevlar exhibited higher wear depths (up to 154 µm for Kevlar) and abrasive mechanisms due to fiber detachment. Shore hardness values increased with infill density, with PLA reaching a maximum of 82.7 Shore D. These findings highlight the critical interplay between infill architecture and surface patterning and offer actionable guidelines for the functional design of durable FDM components in load-bearing or sliding applications. Full article

Dental implant components are typically fabricated using subtractive manufacturing, often involving metal materials that can be costly, inefficient, and time-consuming. This study explores the use of additive manufacturing (AM) with zirconia for dental implant overdenture bars, focusing on mechanical performance, stress distribution, and fit. Solid and lattice-structured bars were designed in Fusion 360 and produced using LithaCon 210 3Y-TZP zirconia (Lithoz GmbH, Vienna, Austria) on a CeraFab 8500 printer. Post-processing included cleaning, debinding, and sintering. A 3D-printed denture was also fabricated to evaluate fit. Thermography and optical imaging were used to assess adaptation. Custom fixtures were developed for flexural testing, and fracture loads were recorded to calculate stress distribution using finite element analysis (ANSYS R2025). The FEA model assumed isotropic, homogeneous, linear-elastic material behavior. Bars were torqued to 15 Ncm on implant analogs. The average fracture loads were 1.2240 kN (solid, n = 12) and 1.1132 kN (lattice, n = 5), with corresponding stress values of 147 MPa and 143 MPa, respectively. No statistically significant difference was observed (p = 0.578; α = 0.05). The fracture occurred near high-stress regions at fixture support points. All bars demonstrated a clinically acceptable fit on the model; however, further validation and clinical evaluation are still needed. Additively manufactured zirconia bars, including lattice structures, show promise as alternatives to conventional superstructures, potentially offering reduced material use and faster production without compromising mechanical performance. Full article

The rapid development of digital technology is reshaping the global economic landscape. However, its impact on firms’ capacity utilization rate (CUR), particularly through technological innovation, remains unclear. This study investigates this issue by developing an endogenous growth model that connects digital technology to CUR. The empirical analysis is based on data from Chinese A-share manufacturing firms. The methods employed include quantile regression, instrumental variable techniques, and various tests to explore underlying mechanisms. CUR is calculated using a special model that looks at random variations, and digital transformation is assessed using text analysis powered by machine learning. The findings indicate that digital transformation significantly enhances CUR, especially for firms with average capacity utilization levels, but has a limited effect on low- and high-end firms. Moreover, technological innovation mediates this relationship; however, factors like “double arbitrage” (involving policy and capital markets) and “herd effects” tend to prioritize quantity over quality, which constrains innovation potential. Improvements in CUR lead to enhanced firm performance and productivity, generating industry spillovers and demonstrating the broader economic externalities of digitalization. This study uniquely applies endogenous growth theory to examine the role of digital transformation in optimizing CUR. It introduces the “quantity-quality” technology innovation paradox as a crucial mechanism and highlights industry spillovers to address overcapacity while offering insights for fostering sustainable economic and social development in emerging markets. Full article

This study examines the influence of different printing orientations and infill settings on the strength and flexibility of components produced using resin-based 3D printing, particularly with masked stereolithography (MSLA). Using a common photopolymer resin and a widely available desktop MSLA printer, we produced and tested a series of samples with varying tilt angles and internal structures. To understand their mechanical behavior, we applied a custom bending test combined with high-precision deformation tracking through the GOM ARAMIS digital image correlation system. The results obtained clearly show that both the angle of printing and the density of the internal infill structure play a significant role in how much strain the printed parts can handle before breaking. Notably, a 75° orientation provided the best deformation performance, and infill rates between 60% and 90% offered a good balance between strength and material efficiency. These findings highlight how adjusting print settings can lead to stronger parts while also saving time and resources—an important consideration for practical applications in engineering, design, and manufacturing. Full article

Background: The growing complexity of production processes in the metal–mechanical industry demands ever more effective strategies for managing machine and equipment maintenance, as unexpected failures can incur high operational costs and compromise productivity by interrupting workflows and delaying deliveries. However, few studies have combined end-to-end data analytics and data mining methods to proactively predict and mitigate such failures. This study aims to develop and validate a comprehensive framework combining data analytics and data mining to prevent machine failures and support decision-making in a metal–mechanical manufacturing environment. Methods: First, exploratory data analytics were performed on the sensor and logistics data to identify significant relationships and trends between variables. Next, a preprocessing pipeline including data cleaning, data transformation, feature selection, and resampling was applied. Finally, a decision tree model was trained to identify conditions prone to failures, enabling not only predictions but also the explicit representation of knowledge in the form of decision rules. Results: The outstanding performance of the decision tree (82.1% accuracy and a Kappa index of 78.5%), which was modeled from preprocessed data and the insights produced by data analytics, demonstrates its ability to generate reliable rules for predicting failures to support decision-making. The implementation of the proposed framework enables the optimization of predictive maintenance strategies, effectively reducing unplanned downtimes and enhancing the reliability of production processes in the metal–mechanical industry. Full article

Background: Thallium is a metal that is ubiquitous in our natural environment. Despite its potential for high toxicity, thallium is understudied and not regulated in food. The California Department of Public Health was alerted to a household cluster of elevated urine thallium levels noted among a mother (peak 5.6 µg/g creatinine; adult reference: ≤0.4 µg/g creatinine) and her three young children (peak 10.5 µg/g creatinine; child reference: ≤0.8 µg/g creatinine). Objectives: This case report identifies questions raised after a public health investigation linked a household’s thallium exposure to a commercially available food product. We provide an overview of the public health investigation. We then explore concerns, such as gaps in toxicological data and limited surveillance of thallium in the food supply, which make management of individual and population exposure risks challenging. Methods: We highlight findings from a cross-agency investigation, including a household exposure survey, sampling of possible environmental and dietary exposures (ICP-MS analysis measured thallium in kale chips at 1.98 mg/kg and 2.15 mg/kg), and monitoring of symptoms and urine thallium levels after the source was removed. We use regulatory and research findings to describe the challenges and opportunities in characterizing the scale of thallium in our food supply and effects of dietary exposures on health. Discussion: Thallium can bioaccumulate in our food system, particularly in brassica vegetables like kale. Thallium concentration in foods can also be affected by manufacturing processes, such as dehydration. We have limited surveillance data nationally regarding this metal in our food supply. Dietary reviews internationally show increased thallium intake in toddlers. Limited information is available about low-dose or chronic exposures, particularly among children, although emerging evidence shows that there might be risks associated at lower levels than previously thought. Improved toxicological studies are needed to guide reference doses and food safety standards. Promising action towards enhanced monitoring of thallium is being pursued by food safety agencies internationally, and research is underway to deepen our understanding of thallium toxicity. Full article

This paper presents a disaster detection framework based on aerial imagery, utilizing a Branch Convolutional Neural Network (B-CNN) to enhance feature learning efficiency. The B-CNN architecture incorporates branch training, enabling effective training and inference with reduced model parameters. To further optimize resource usage, the framework integrates DoReFa-Net for weight quantization and fixed-point parameter representation. An early exit mechanism is introduced to support low-latency, energy-efficient predictions. The proposed B-CNN hardware accelerator is implemented using TSMC 16 nm CMOS technology, incorporating power gating techniques to manage memory power consumption. Post-layout simulations demonstrate that the proposed hardware accelerator operates at 500 MHz with a power consumption of 37.56 mW. The system achieves a disaster prediction accuracy of 88.18%, highlighting its effectiveness and suitability for low-power, real-time applications in aerial disaster monitoring. Full article