Search Results (2,247)

Among numerous atmospheric-pressure plasma jets (APPJs), high industrial acceptability has been reached for the ones based on high-voltage, low-current, vortex-stabilized arc, typically operated with kHz DC-pulses. This review explores the interrelations between the “process” in a chemical–physical sense and “process”, or to better differentiate, “processing” in the sense of technological treatment, with respect to such APPJs. The mutual dependence of the processing requirements (e.g., high processing speed, compatibility with robotic processing, low total cost of ownership, reliability, and long service intervals) and the physical and chemical processes in the plasma jet are analyzed. The focus is on the hybrid character of the produced plasma, comprising a non-equilibrium arc and a diffuse plasma. Different operation modes of the gliding arc discharge (GAD) are discussed. The reviewed chemical processes are the generation of reactive oxygen–nitrogen species (RONS), oxidation and reduction reactions, and interactions with vapors, solids, and liquids. The considered processing examples are established applications, such as surface activation, cleaning, oxide reduction, film removal, and coating, as well as emerging applications for sterilization and plasma-activated water (PAW) production. Full article

The Droplets Triboelectric Nanogenerator (DTENG) possess distinctive merits in harvesting ambient hydropower into usable electricity. Nevertheless, droplet spreading, contact separation behavior, and dynamic interfacial interactions on insulating film surfaces are extremely sensitive to external environmental factors, giving rise to complicated nonlinear output characteristics. Herein, this work reports a droplet-driven TENG based on fluorinated ethylene propylene (FEP) thin films. We systematically explore how electrode geometry, droplet falling height, substrate inclination angle, and droplet flow rate modulate electrical output performance, and further clarify the fluid-triboelectric electron transfer between droplet hydrodynamic evolution and electric signal generation. Notably, we identify the retraction current during droplet recession, a signal largely neglected in previous solid–liquid TENG research, which complements the fundamental mechanism of interfacial charge transfer. This work not only provides a systematic experimental basis for understanding the working mechanism of DTENG, but also lays a theoretical and practical foundation for developing efficient and controllable water energy collection and self-powered sensor systems. Full article

Three-year atmospheric field-exposure tests were conducted on 304 austenitic stainless steel at the Great Wall and Zhongshan Stations in Antarctica to evaluate its corrosion behavior under severe polar conditions. The exposed specimens were dominated by localized corrosion with pronounced pitting characteristics at both sites. Corrosion was more severe at Zhongshan Station, and the mean corrosion rates at Great Wall and Zhongshan Stations were 1.428 and 1.643 μm y⁻¹, respectively. The mean/maximum pit depths were 4.16/5.51 μm at Great Wall Station and 5.85/8.24 μm at Zhongshan Station. Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), grazing-incidence X-ray diffraction (GIXRD), and focused ion beam-transmission electron microscopy (FIB-TEM) showed that the corrosion products consisted mainly of β-FeOOH, α-FeOOH, and γ-Fe₂O₃, and the Antarctic exposure substantially altered the thickness, structure, and electrochemical response of the passive film. Compared with the unexposed specimen, the exposed specimens exhibited markedly lower charge-transfer resistance and higher donor density, indicating degradation of the protective passive film. Combined with the site-specific environmental features, the lower temperature, more intense freeze–thaw cycling, freezing-induced concentration of electrolytes, and stronger irradiation at Zhongshan Station are inferred to promote Cl⁻ enrichment in localized surface liquid films and destabilization of the passive film, thereby accelerating pit initiation and growth. These findings provide a mechanistic basis for material selection and corrosion-protection design for 304 stainless steel in polar engineering environments. Full article

Silicon anodes hold great promise in high-energy lithium-ion batteries (LIBs) owing to their ultrahigh theoretical specific capacity, appropriate operating voltage, and low costs. However, the drastic volume expansion, inferior electronic conductivity, and unstable solid electrolyte interphase of Si anodes severely restrict their practical application. Herein, a nest-shaped microporous silicon (NMPSi) is rationally designed via acid–base co-etching and then synergistically regulated by surface thin-film carbon coating and ZIF-67-derived hard carbon nanotemplate (NMPSi@THC) by an in situ liquid-phase coating strategy. The constructed unique architecture is capable of buffering the huge volume expansion of inner NMPSi during cycling and constructing an optimized electron/ion transport network, thereby stabilizing the SEI film and preserving the electrode’s structural integrity. When it is evaluated as a LIB anode, the NMPSi@THC exhibits typically improved initial coulombic efficiency (ICE) and outstanding long-life cyclic stability (622.7 mAh g⁻¹ after 300 cycles at 1 A g⁻¹ and 2 mg cm⁻²). Furthermore, the NMPSi@THC//LiFePO₄ full cell delivers an ultrahigh ICE of 94% and a capacity retention rate of 86%, demonstrating its practical application potential. Compared with most recently reported Si anodes, this report delivers better cycling stability and maintains more intact electrode structure under relatively high current density and areal mass loading in half/full cells after long-term cycling. This research offers a convenient and scalable route to fabricate highly stable microporous Si anodes toward high-energy and long-lifespan LIBs. Full article

The $XY$ model is one of the basic models of statistical mechanics. It is often used for the description of important physical systems like ⁴He films and liquid crystals. In the present work, we consider the Ginzburg–Landau mean-field approximation of the 3D $XY$ model. We study the Lie-point symmetries of the corresponding Ginzburg–Landau Hamiltonian and the associated Euler–Lagrange equations for finite systems with film geometry and establish the variational symmetries among them in the presence of an external ordering field. Then, using the Noether theorem, we find conservation laws that allow us to obtain and present in analytic form, by means of Weierstrass elliptic, zeta, and sigma functions, the general solution of the so-called twisted boundary value problem in the absence of an external ordering field. It should be remarked that exact solutions in the absence of an external ordering field are only known within the so-called $\mathsf{\Psi }$-theory and some other mean-field-like theories. Full article

Accurate multiphase flow measurement in horizontal wells is fundamentally challenged by the antagonistic electrical responses of water and gas: Electrical Resistance Tomography (ERT) loses sensitivity to thin liquid films, while Electrical Capacitance Tomography (ECT) suffers signal saturation in conductive water, preventing either modality from covering the full operating envelope alone. This study proposes a physics-guided hybrid modeling framework that integrates multi-modal ERT/ECT sensing to achieve high-precision flowrate inversion. The framework utilizes a corrected multi-modal fusion algorithm, achieving a liquid holdup MAPE of 2.5 ± 0.5% representing a nearly two-fold improvement over the best single-modality system (Direct ERT, 4.5%). For velocity estimation, an optimized cross-correlation method yields results with ± 3.0% error, incorporating multi-sensor and multi-sequence fusion. A key finding is that deep neural networks exhibit Architectural Phase Specialization: multi-branch architectures (MB-DNN) perform strongly on localized, heterogeneous liquid structures (2.0% liquid error), whereas fully-connected architectures (FC-DNN) excel at capturing the global patterns of the continuous gas core (1.2% gas error). By hybridizing a calibrated drift-flux physical model with these phase-specialized DNNs, the framework achieves overall averaged errors of 1.8% for gas and 1.5% for liquid across the full experimental envelope. The proposed framework was evaluated on 444,313 experimental samples and subsequently validated in a three-month industrial trial at the Puguang gas field under extreme conditions (26 MPa, 80 °C), where it maintained a prediction error of ± 2.3%. This work establishes a scalable, physically consistent paradigm for intelligent hydrocarbon production monitoring. Full article

The present study investigated the effect of liquid smoke (LS) on the physicochemical, structural, barrier, and functional properties of okra mucilage–corn starch (OMCS) films. Formulations containing varying concentrations of LS (0–3%) were prepared using the casting method. The incorporation of LS modified the rheological behavior of the film-forming dispersions, as evidenced by increased apparent viscosity and consistency index. In the films, water solubility increased from 43.6 to 53.2%, contact angle increased from 31.9° to 55.6°, and opacity increased from 4.73 to 8.83, while water vapor permeability decreased from 1.05 to 0.88 g·mm·m⁻²·h⁻¹·kPa⁻¹, indicating modifications in matrix organization and surface hydrophobicity. Tensile strength increased from 26.3 to 40.5 MPa at 3% LS, accompanied by a slight reduction in elongation, suggesting enhanced structural rigidity. Structural analyses revealed interactions between the LS phenolic compounds and the polysaccharide hydroxyl groups, resulting in a more cohesive polymeric network. LS was the main contributor to the film’s antioxidant activity owing to its elevated phenolic content and free radical scavenging capacity. The films also showed substantial degradation under soil burial conditions, with mass loss ranging from 61% to 96%. Overall, LS proved to be an effective functional additive, improving the structural and antioxidant performance of OMCS films and expanding their potential for active food packaging applications. Full article

Deep unconventional oil and gas reservoirs are critical to hydrocarbon exploration and development in China. However, their complex geological and petrophysical features, including high temperature, high pressure, high salinity, multiple pressure systems, and intricate pore–fracture structures, make them highly susceptible to formation damage during drilling, completion, stimulation, and production. Effective reservoir protection is therefore essential for minimizing damage and improving development efficiency. This paper systematically reviews recent advances in reservoir protection for deep unconventional reservoirs, with a focus on evaluation methods and protective materials. Laboratory evaluation methods, including permeability recovery, nuclear magnetic resonance, pressure decay, and spontaneous imbibition, together with field-based approaches such as well testing and production decline analysis, are summarized and assessed for their applicability to complex damage characterization. Major damage mechanisms, including liquid-phase trapping, solid invasion, sensitivity damage, stress sensitivity, and wettability alteration, are analyzed with emphasis on working fluid–reservoir interactions under multi-field coupling conditions. Recent progress in protective materials is also reviewed, covering polymer-based materials such as gel sealing agents, delayed-swelling hydrogels, water-/oil-soluble temporary plugging agents, and film-forming polymers, as well as ultrafine CaCO₃ and fiber-based materials. In addition, related protection technologies, including temporary plugging, film-forming fluid-loss control, underbalanced drilling, and low-damage completion fluids, are discussed. Existing models developed for conventional sandstone reservoirs are insufficient for deep unconventional systems. Future research should prioritize integrated evaluation and protection methods tailored to deep tight, shale, and fractured–vuggy carbonate reservoirs. This review provides a basis for understanding complex damage mechanisms, developing functional protective materials, and advancing integrated reservoir protection technologies for the efficient development of deep unconventional resources. Full article

A silk fibroin/cellulose inverse-opal photonic crystal composite with robust mechanical properties was fabricated by blending a silk fibroin solution with methylcellulose, utilizing a 3D poly(methyl methacrylate) (PMMA) photonic crystal array as a template, via sequential infiltration, curing, and etching processes. Leveraging the intrinsic water sensitivity of both silk fibroin and methylcellulose, the resulting composite exhibits exceptional moisture-sensing capabilities across gaseous, liquid, and solid phases. Specifically, for atmospheric humidity, the film delivers a distinct optical response to a relative humidity variation in merely 5%. In liquid systems, owing to the material’s excellent affinity for low-polarity organic solvents and the disruptive effect of highly polar solvents (e.g., water) on the photonic periodic structure, the structural color of the film can sensitively report trace water contents down to 0.025%. Furthermore, in solid matrices, the composite enables the precise detection of not only free water but also water of crystallization. Full article

To reveal the nonlinear instability mechanism by which the three-degree-of-freedom rotor system of a magnetic-liquid double suspension bearing transforms from stable suspension to periodic vibration, a nonlinear dynamic model considering electromagnetic suspension force, hydrostatic supporting force, rotor unbalance force, and liquid film resistance is established. The equilibrium point of the system is linearized, and the Hopf bifurcation boundary is determined using the Routh–Hurwitz criterion. Numerical simulations are then carried out to investigate the effects of the initial current i₀, supply flow rate q₀, and different initial disturbances on the displacement time histories, phase trajectories, and spatial phase trajectories of the rotor. The results show that, under the given system parameters, the Hopf bifurcation boundary is 0.61 A for the initial current and 9.62 × 10⁻⁵ m³/s for the supply flow rate. Current variation mainly affects electromagnetic stiffness and nonlinear electromagnetic force, whereas flow rate variation primarily changes the hydrostatic load capacity and oil film damping characteristics. Under different initial disturbances, the system may exhibit amplitude attenuation, recovery to stable suspension, or finite amplitude periodic vibration. Experimental results show good agreement with numerical simulations in terms of frequency spectra, displacement time histories, and phase trajectories, thereby verifying the effectiveness of the proposed three-degree-of-freedom dynamic model and Hopf bifurcation analysis method. The results can provide theoretical guidance for parameter matching, stability evaluation, and self-excited vibration suppression of magnetic-liquid double suspension bearings. Full article

Accelerated carbonation of cement-based materials offers a promising route for CO₂ sequestration driven by waste heat co-emitted from cement and power plants; however, existing kinetic models typically describe the low-temperature gas–liquid–solid regime near 100 °C and the high-temperature gas–solid regime near 600 °C in isolation, limiting their applicability to plant-scale reactor design. This study proposes a unified dual-regime kinetic framework spanning 20–700 °C. The low-temperature branch couples Henry’s-law CO₂ solubility, a sigmoidal water-film stability function, and an Arrhenius ionic reaction term, whereas the high-temperature branch integrates shrinking-core surface reaction and product-layer diffusion with an attenuation term near the CaCO₃ decomposition onset. Seven parameters were calibrated by bounded least squares against a 51-point temperature dataset compiled from the author’s previously published carbonation experiments. The calibrated model reproduced the bimodal temperature dependence of the carbonation degree (R² = 0.62; RMSE = 0.083), with peaks near 100 °C and 640 °C, and predicted reactor volumes of order-of-magnitude 150–200 m³ for a 1 Mt/y cement plant under three waste-heat operating points. The framework bridges particle-scale kinetic and plant-scale design, and identifies mixing as the dominant operational sensitivity at the clinker-cooler condition. Full article

The valorization of lignocellulosic residues into bioactive and biodegradable materials offers a sustainable route for functional food packaging. In this study, hazelnut shells were exploited through an integrated process enabling the integrated recovery of polyphenols and cellulose. Polyphenols were extracted via hot water, liquid–liquid partitioning, and column chromatography, yielding a purified bioactive fraction. The residual biomass after polyphenol recovery was used for cellulose extraction (approximately 23% w/w) and converted into carboxymethyl cellulose (CMC) with a degree of substitution (DS) of 0.77. Active CMC films incorporating polyphenolic extracts exhibited improved mechanical performance, reaching tensile strengths of about 78 MPa and elongation at break values above 20%, while reducing water solubility to approximately 31%. The addition of carnauba wax further enhanced water resistance while modulating flexibility and stiffness. Attenuated Total Reflectance-Fourier Transform Infrared spectroscopy (ATR-FTIR) and scanning electron microscopy (SEM) analyses confirmed the conversion of crystalline cellulose into amorphous CMC and the successful incorporation of additives within the polymer matrix. The resulting films showed tunable mechanical, optical, and barrier properties, along with UV-blocking and antioxidant activity. These findings demonstrate that hazelnut shell-derived CMC films enriched with polyphenols and carnauba wax represent promising candidates for a sustainable platform for active food packaging applications, supporting a circular waste-to-value approach. Full article

Tellurene has a wide bandwidth and low propagation loss at near-infrared wavelengths due to its nonlinear absorption coefficient. Therefore, we prepared tellurene–polyvinyl alcohol (Te-PVA) film as a saturable absorber in an Er-doped fiber laser by liquid phase exfoliation and spin-coating. The modulation depth was 5.25% and the saturation intensity was 17.02 MW/cm. The nonlinear optical properties of the film and its application in high-stability mode-locked operation were studied. A mode-locked pulse with a fundamental frequency of 8.48 MHz and a central wavelength of 1560.10 nm was obtained, with a signal-to-noise ratio which was greater than 75 dB. A traditional soliton mode-locked operation with a pulse width of 1.41 ps was achieved. In addition, eighth- and 19^th-harmonic mode-locked operations were obtained by adjusting the pump power and polarization controller. Our results show that Te-PVA film functioned as a saturable absorber which enabled harmonic mode-locking with an SNR of 75 dB in an Er-doped fiber laser. It is thus an excellent ultra-fast photonics material. Full article

This study investigated the impact of cobalt/nickel-silicate loadings on graphitic carbon nitride at 10% and 20% doses, designated (CoNiSi-10) and (CoNiSi-20), for the removal of ciprofloxacin (CPF), a hazardous, bioaccumulative antibiotic. The synthesized composites were characterized in detail using SEM, EDX, TEM, N₂ adsorption–desorption, XRD, and FTIR techniques. The CoNiSi-10 and CoNiSi-20 exhibited CPF q_t values of 64 and 107 mg g⁻¹, respectively, which were consistent with the surface area results. Adsorption kinetics indicated that CPF uptake on CoNiSi-10 and CoNiSi-20 fitted the Lagergren model, with the liquid-film and intraparticle-diffusion mechanisms co-governing CPF sorption. The isotherm investigations indicated CPF adsorption on CoNiSi-10 and CoNiSi-20 aligned with the Langmuir model, suggesting a homogeneous surface, while the Dubinin-Radushkevich results primarily indicated physisorption-based CPF removal. The thermodynamic analyses supported the physisorption outcome and indicated that CPF sorption onto CoNiSi-10 and CoNiSi-20 was endothermic. A five-cycle reusability test yielded average efficiencies of 94% and 96% for CoNiSi-10 and CoNiSi-20, respectively, and an after-sorption analysis indicated their stability and robustness. The ease of synthesis and excellent sorption performance may nominate CoNiSi-10 and CoNiSi-20 as promising adsorbents for treating pharmaceutically contaminated wastewater. Full article

Brewer’s spent grain (BSG), the main by-product of the brewing industry, is an abundant lignocellulosic residue that remains underused. In this study, antioxidant-rich extracts were obtained from BSG using pressurized liquid extraction (PLE) and subsequently incorporated into thermoplastic starch (TPS) films for sustainable food packaging applications. The phenolic profile analysis revealed 13 compounds, with caffeic acid and its hexoside as the most abundant. Extraction conditions were optimized using response surface methodology (RSM) to maximize yield and total phenolic content, showing that temperature had a significant positive effect. The selected extract had a total phenolic content of 3.19 mg/g dw and exhibited notable antioxidant activity. It was then incorporated into the polymer matrix, and the resulting films were analyzed for their structural, thermal, and antioxidant properties. The incorporation of BSG extracts improved the film antioxidant activity. Additionally, the release of phenolic compounds was evaluated and successfully described using a diffusion model based on Fick’s law, which allowed the calculation of a diffusion coefficient D = 2.63 × 10⁻⁸ cm²/s. Overall, the findings indicate that BSG-based extracts may represent promising functional additives for biodegradable polymer films, and the developed TPS films serve as proof-of-concept active packaging materials from renewable agro-industrial residues. Full article