Search Results (69)

Background/Objectives: Immune cells are integral to bone homeostasis, including the repair and remodeling of bone tissue. Chronic dysregulation within this osteoimmune network can lead to bone marrow defects of the jaw (BMDJ), particularly fatty degenerative osteonecrosis of the jaw (FDOJ). These localized pathologies are implicated in systemic immune dysfunctions. Methods: This study is designed to determine whether BMDJ/FDOJ samples are indicative of medullary bone pathology by evaluating FDOJ gene expression patterns using quantitative real-time PCR. Results: Comparative analyses between pathological and healthy samples evaluated the dysregulation of key molecular pathways. BMDJ/FDOJ samples showed significant upregulation of inflammatory mediators, including CCL5/RANTES, VEGF, IGF and KOR, and downregulation of structural proteins, such as collagen types I, II and IV, and osteogenesis-associated factors, such as SP7. Conclusions: The study provides new insights into the molecular mechanisms of BMDJ/FDOJ by identifying potential molecular changes suggesting a pro-inflammatory state in the affected jawbone which may contribute to systemic immune dysregulation. The findings are consistent with morphologic observations of BMDJ/FDOJ in degenerated jawbone and underscore the need for integrative approaches in dentistry and medicine while highlighting BMDJ/FDOJ as a potential target for therapeutic and preventive strategies against systemic diseases and emphasizing its clinical significance. Full article

Background/Objectives: The objective of this study was to analyze the profiles of sphingosine (Sph), sphinganine (SPA), sphingosine-1-phosphate (S1P), and ceramides (C14 Cer, C16 Cer, C18:1 Cer, C18 Cer, C20 Cer, C22 Cer, C24:1 Cer, and C24 Cer), along with caspases (CAS-3, CAS-6, and CAS-9), in serum and in the periosteum of the maxilla and mandible in patients with dentofacial deformities undergoing treatment with titanium fixations (miniplates and miniscrews). Methods: The study group comprised 20 patients who underwent bilateral jaw osteotomy due to dentofacial deformities. The osteotomy segments were stabilized with titanium alloy miniplates and screws. The control group consisted of 20 patients who had not yet received surgical treatment for maxillofacial defects. Results: Sphinganine (SPA) and ceramide C22 (C22 Cer) were the only compounds found to be significantly elevated in the serum of the study group compared to the control group. The concentrations of Sph, SPA, C14 Cer, C16 Cer, C18 1 Cer, C18 Cer, C22 Cer, C24 1 Cer, C24 Cer, and S1P were significantly lower in the maxillary periosteum of patients in the study group compared to those in the control group. The concentration of C20 Cer was significantly higher in the maxillary periosteum of patients in the study group compared to the control group. In contrast, the concentrations of Sph, SPA, C14 Cer, C16 Cer, C18 1 Cer, C22 Cer, C24 1 Cer, and C24 Cer were significantly lower in the mandibular periosteum of the study group compared to the control group. The concentrations of C20 Cer and S1P were significantly elevated in the mandibular periosteum of patients in the study group compared with the control group. The activity of CAS-3 was significantly higher in the mandibular periosteum of patients in the study group compared to those in the control group. Conclusions: Titanium fixations induce local changes in the sphingolipid profile within the periosteum of the maxilla and mandible, while no systemic impact on this metabolism was observed. Full article

Background/Objectives: The use of titanium meshes in bone regeneration is a clinical procedure that regenerates bone defects by ensuring graft stability and biocompatibility. The aim of the present investigation was to evaluate the clinical effectiveness of titanium mesh procedures in terms of vertical bone gain and the exposure rate. Methods: The product screening and eligibility analysis were performed using the Pubmed/MEDLINE, EMBASE, and Google Scholar electronic databases by two authors. The selected articles were classified based on the study design, regenerative technique, tested groups and materials, sample size, clinical findings, and follow-up. A risk of bias calculation was conducted on the selected randomized controlled trials (RCTs) and non-randomized trials and a series of pairwise meta-analysis calculations were performed for the vertical bone gain (VBG) and exposure rate. A significantly lower exposure rate was observed using coronally advanced lingual flaps (p < 0.05). No difference was observed between the titanium mesh and GBR techniques in terms of VBG (p > 0.05). Results: The initial search output 288 articles, and 164 papers were excluded after the eligibility analysis. The descriptive synthesis considered a total of 97 papers and 6 articles were considered for the pairwise comparison. Conclusions: Within the limits of the present investigation, the titanium mesh procedure reported high VBG values after the healing period. The mesh exposure rate was drastically lower with passive management of the surgical flap. Full article

Maxillofacial bone defects can have a profound impact on both facial function and aesthetics. While various biomaterial scaffolds have shown promise in addressing these challenges, regenerating bone in this region remains complex due to its irregular shape, intricate structure, and differing cellular origins compared to other bones in the human body. Moreover, the significant and variable mechanical loads placed on the maxillofacial bones add further complexity, especially in cases of difficult-to-treat medical conditions. This review provides a brief overview of medication-related osteonecrosis of the jaw (MRONJ), highlighting the medication-induced adverse reactions and the associated clinical challenges in treating this condition. The purpose of this manuscript is to emphasize the role of biotechnology and tissue engineering technologies in therapy. By using scaffold materials and biofactors in combination with autologous cells, innovative solutions are explored for the repair of damaged facial bones. The ongoing search for effective scaffolds that can address these challenges and improve in vitro bone preparation for subsequent regeneration in the maxillofacial region remains critical. The primary purpose of this review is to spotlight current research trends and novel approaches in this area. Full article

Background/Objectives: Defects in maxillary and mandibular continuity are common in maxillofacial practice. They can occur after trauma, osteonecrosis, congenital jaw deformities, or surgical resection of benign or malignant tumours. Reconstruction with microvascular bone flaps and subsequent prosthetic rehabilitation is considered the contemporary first line treatment. This study assessed the extent to which the underlying disease influences the treatment course of microvascular segmental jaw reconstruction. Methods: A retrospective review of prospectively collected data from all patients who underwent microvascular segmental jaw reconstruction from January 2011 to December 2020 was completed. The course of treatment as well as the process of dental rehabilitation was assessed. Results: Two hundred patients were included in the study. A total of 15.5% of patients were fitted with a conventional removable prosthesis, and implant-supported prosthetic restoration could be realized in 53.5% of patients. However, dental rehabilitation was not possible in 31.0% of patients. The outcomes of prosthetic restoration showed a statistically significant difference between the different underlying diseases (p < 0.0001). About 50% of patients with malignant diseases and osteonecrosis remained without dental rehabilitation. In contrast, more than 90% of patients with jaw continuity defects, due to benign diseases or malformations, were able to receive an implant-supported prosthesis. Among the diagnostic groups, there was a significant difference regarding the number of implants placed (p < 0.0001). There was a significant correlation between increased incidence of complications and the size of the bone flaps. Conclusions: The underlying disease influenced significantly the treatment course and the outcome of dental rehabilitation after microvascular jaw reconstruction. Full article

Background/Objectives: Extensive and closely coordinated remodeling processes take place in the periodontal ligament (PDL) and the adjacent bone during orthodontic tooth movement. In complex orthodontic cases, it is necessary to move teeth into an augmented bony defect, for example, in patients with cleft lip, alveolus, and palate. The important role of the PDL during tooth movement is well accepted but not fully understood. Therefore, the present study investigated the PDL after 23 weeks of tooth movement into an augmented critical-sized defect. Methods: The second molars of four beagle dogs were moved into a critical-sized defect, which was filled with bovine xenograft or nanocrystalline hydroxyapatite. Autogenous bone served as control. After 23 weeks, histological samples were microscopically analyzed, and the dimension of the PDL was measured. For statistical calculations, a Wilcoxon–Mann–Whitney test was used. Results: The PDL was significantly wider on the tension side compared with the compression side for all replacement materials analyzed (p ≤ 0.05). These results apply to both the mesial and distal roots. Conclusions: The remodeling processes reached equilibrium within 23 weeks, resulting in a wider gap on the tension side, which contrasts with the situation a few days after the initial force application. Full article

Objectives: Titanium miniplates and screws are commonly used in the surgical management of dentofacial deformities. Despite the opinion of the biocompatibility of these bone fixations, some patients experience symptoms of chronic inflammation around titanium implants even many years after their application. The aim of this study was to examine the levels of cytokines, chemokines, and growth factors released from the maxilla and mandible periosteum surrounding titanium fixations 11 months after the implantation procedure. Methods: From the study group (n = 20) consisting of patients with maxillofacial defects who underwent bimaxillary osteotomy, fragments of the periosteum of the maxilla and mandible adjacent to the titanium miniplates and screws were taken during routine bone fixation removal procedures. From the control group subjects (n = 20), fragments of healthy maxillary and mandibular periosteum were taken prior to surgical treatment of dentofacial deformities. The examination of cytokines, chemokines, and growth factors levels released from the periosteum of jaws was performed using the Bio-Plex Pro Human Cytokine Screening Panel (48-Plex). Results: The study group was characterized by a significant increase in the concentration of most of the tested-for proinflammatory cytokines/chemokines/growth factors compared to the control group, with greater amounts of inflammatory factors released from the periosteum covering the titanium implants in the mandible than from the periosteal cells surrounding the titanium implants in the maxilla. Conclusions: Prolonged exposure to titanium miniplates and screws leads to a disturbance of immune homeostasis in the periosteal cells of the maxilla and mandible. The data obtained indicate the need to remove fixations after the bone fragments have healed. Full article

Objectives: The objective of this study was to compare the trueness and precision of three intraoral scanners (IOSs) for the digitization of dentate and edentulous maxillectomy and mandibulectomy defects in artificial models. Methods: Four representative defect models—a dentate and an edentulous maxillectomy model and a dentate and an edentulous mandibulectomy model—were used for digital scanning. After a reference scan of each model, they were scanned with three IOSs: CEREC AC Omnicam, True Definition, and cara TRIOS 3. For comparison, five conventional impressions with a polysiloxane material were taken and digitized with a laboratory scanner. The obtained data were evaluated with three-dimensional (3D) inspection software and superimposed with the reference scan data by using a best-fit algorithm. The mean absolute 3D deviations of the IOS compared to the reference data (trueness) and when comparing the datasets within the IOS (precision) were analyzed. Linear mixed models and multiple pairwise comparisons were used for statistical analyses. Results: The overall comparison of the four evaluated procedures for data acquisition showed a significant difference in trueness (p < 0.0001) and precision (p < 0.0001). The average mean trueness of the IOSs ranged from 32.17 to 204.43 µm, compared to 32.07 to 64.85 µm for conventional impressions. Here, the conventional impression and cara TRIOS 3 performed the most precisely with no significant difference. CEREC AC Omnicam achieved the worst precision. Conclusions: Using a suitable intraoral scanner, defective jaws even without teeth could be captured in satisfying accuracy. This shows the possibility to use an intraoral scanner for maxillofacial defect patients and gives a vision of using digital technology in maxillofacial prosthetics. Full article

Background/Objectives: Head and neck free-flap reconstructions are often required to treat tumors or extensive post-traumatic jaw defects. The facial artery is the standard receiving vessel for intraoral microvascular anastomoses. However, its use is associated with several disadvantages, such as lesions of buccal nerve branches of the facial nerve or the parotid duct, as well as variability in course and diameter. The aim of this study is to investigate whether branches of the sublingual artery can be considered as an alternative intraoral supply vessel to the facial artery to avoid these drawbacks. Methods: Twelve formalin-fixed cadaveric heads with 24 sides (n = 24) were dissected. The origin, course, branching pattern, and distribution of the sublingual artery were examined. In addition, the diameters of the branches of the sublingual artery were assessed to identify potential supply vessels for anastomoses. Results: In ten of the twenty-four cases (41.7%), the sublingual artery originated from the lingual artery, and in nine cases (37.5%), the lingual artery originated from the facial artery. The main trunk of the sublingual artery was present in the floor of the mouth in all cases (100%), with a diameter of ≥0.9 mm in vitro (1 mm in vivo). In 15 of the 24 half heads (62.5%), branches of the sublingual artery with ≥0.9 mm were identified in this space, with the main branch being considerably stronger. Conclusions: The large diameter of the sublingual artery in the floor of the mandible suggests that this vessel or its branches could be considered as alternative pedicles for intraoral anastomoses in mandibular microvascular free-flap grafts. Full article

Medication-Related Osteonecrosis of the Jaw (MRONJ) is characterized by bone exposure in the oral and maxillofacial region for more than eight weeks in patients treated with anti-resorptive agents, immunosuppressants, or anti-angiogenic agents, without prior radiation therapy or metastatic disease to the jaws. Conservative treatments can control infection in mild cases, but surgical intervention is necessary for patients with severe symptoms. A 78-year-old female with a history of bisphosphonate treatment for osteoporosis presented with persistent pain, swelling, and malodor following implant placement in the upper right maxilla. SPECT/CT imaging revealed a high-risk hot spot in the right maxillary region. BIS-guided surgery using the Qray pen-C was performed, selectively removing red fluorescent bone tissue. The defect was grafted with HuBT incorporated with rhBMP-2. Postoperative follow-ups at 4, 7, and 14 months showed successful bone healing, transforming into a corticocancellous complex, and implant placement without MRONJ recurrence. Allogeneic demineralized dentin matrix (DDM) incorporated with rhBMP-2 demonstrates effective bone healing and implant placement following BIS-guided MRONJ surgery. This case supports the use of DDM/rhBMP-2 for tissue regeneration in MRONJ treatment, enabling successful prosthetic restoration without recurrence. Full article

An urgent issue is the preservation or reconstruction of the volume of bone tissue in planning and surgical treatment in the fields of medicine, such as traumatology, orthopedics, maxillofacial surgery and dentistry. After tooth extraction, resorption of the bone tissue of the alveolar crest of the jaws occurs, which must either be further eliminated by performing additional operations or using osteoplastic material for socket preservation at the extraction stage. Background and Objectives: The aim of the study was a comparative analysis of various osteoplastic materials used to preserve the volume of bone tissue in the preimplantation period. Materials and Methods: As part of the study, 80 patients were treated, who underwent socket preservation using xenografts, plasma enriched with growth factors, an autologous dentin matrix (ADM) and hydroxyapatite. Results: The results of the treatment 16 weeks after removal were comprehensively analyzed using a morphometric analysis of the bone’s volume, cone beam tomography and morphological examination of burr biopsy specimens, as well as by determining the stability of the installed implant at different stages of treatment. Conclusions: The lowest level of bone tissue resorption according to the CBCT data was noted in the ADM and xenograft groups. It should be noted that the use of osteoplastic material in jaw surgery when reconstructing alveolar defects is an essential procedure for preventing the atrophy of bone tissue. Full article

Background: Amniotic membrane (AM) holds significant promise in various medical fields due to its unique properties and minimal ethical concerns. This study aims to explore the diverse applications of the human amniotic membrane (HAM) in maxillofacial surgery. Methodology: A comprehensive search was conducted on databases, namely Google Scholar, PubMed, and Scopus, from January 1985 to March 2024. Articles in English, Polish, and Spanish were included, focusing on keywords related to amniotic membrane and oral surgery. Results: Various preservation methods for HAM were identified, namely fresh, decellularized, cryopreserved, lyophilized, and air-dried formats. Clinical studies demonstrated the efficacy of HAM in repairing oral mucosal defects, vestibuloplasty, oronasal fistula closure, cleft palate treatment, bone defect repair, and medication-related osteonecrosis of the jaw (MRONJ). Surgeon evaluations highlighted the ease of handling but noted challenges in suturing and stability during application. Conclusions: Amniotic membranes offer a versatile and effective option in maxillofacial surgery, promoting wound healing, reducing inflammation, and providing a scaffold for tissue regeneration. Further research, including randomized trials and comparative studies, is warranted to validate the efficacy and optimize the utilization of HAM in clinical practice. Full article

Cherubism is nowadays classified as an autoimmune disease and was first described in 1933. Although suspected at that time to be the result of defective tooth development, it was primarily classified as a bone disease caused by a mutation in the SH3BP2 gene. Despite a knock-in mouse model, phenotypic signs in the jaw area were not reproducible in this model. The features of classical cherubism can be attributed to a disturbed formation of the dental placode of the second molar. Since 2019, it has become clear that inhibition of the WNT pathway leads to the accumulation of SH3BP2 via tankyrase inhibition. As the dental placode is triggered via WNT (in epithelia) and MSX1 (in mesenchyme), aplasia of the second and third molars occurs due to a block in the WNT pathway. The mesenchymal part, which occurs prior to the body plan regulation of the WNT/MSX1 pathway, remains unaffected and provides the substrate for the giant cell granuloma. Considering macrophage polarization and the role of the extracellular matrix in general, cherubism is situated in the field of tension between autoimmune diseases and cancer. In this sense, we see the cause of cherubism in a WNT-related dysregulation, which can be proven postnatally in the neural crest-related tooth development of the replacement tooth ridge, both genotypically and phenotypically. Full article

Periodontal defects’ localization affects wound healing and bone remodeling, with faster healing in the upper jaw compared to the lower jaw. While differences in blood supply, innervation, and odontogenesis contribute, cell-intrinsic variances may exist. Few studies explored cell signaling in periodontal ligament stem cells (PDLSC), overlooking mandible-maxilla disparitiesUsing kinomics technology, we investigated molecular variances in PDLSC. Characterization involved stem cell surface markers, proliferation, and differentiation capacities. Kinase activity was analyzed via multiplex kinase profiling, mapping differential activity in known gene regulatory networks. Upstream kinase analysis identified stronger EphA receptor expression in the mandible, potentially inhibiting osteogenic differentiation. The PI3K-Akt pathway showed higher activity in lower-jaw PDLSC. PDLSC from the upper jaw exhibit superior proliferation and differentiation capabilities. Differential activation of gene regulatory pathways in upper vs. lower-jaw PDLSC suggests implications for regenerative therapies. Full article

Defects and bone loss in the maxilla and mandible pose significant challenges for dental rehabilitation. This paper focuses on complex cases of bimaxillary dental rehabilitation, where traditional dental implant protocols were not feasible in at least one jaw. Four patients were examined conceptually, where conventional dental implant placement (n = 20) was combined in either the same or opposite jaw with a patient-specific subperiosteal implant (n = 5). This study evaluates aspects such as primary stability, prosthodontic restoration, complications, and soft tissue management over the observation period. None of the five patient-specific subperiosteal implants (IPS Implants^® Preprosthetic; KLS-Martin Group, Tuttlingen, Germany) experienced failure or showed any loosening of screws, with the longest observation period extending to 68 months. These implants were securely fixated away from the posts, without any biomechanical restrictions on loading from the time of insertion. Planning and manufacturing, including the initial suprastructure, followed a fully digital workflow. The number of screws required for multivector fixation ranged from 13 to 22. All dental implants placed remain functional, definitive prosthodontic restoration has been performed, and no stability loss or peri-implantitis has been observed. The IPS Implants^® Preprosthetic emerges as a valuable consideration when conventional implant dentistry protocols encounter limitations. Full article