Search Results (895)

To mitigate the effects of climate change, the world must significantly reduce its reliance on fossil fuels to lower greenhouse gas emissions. The nuclear power and renewable energy sources, such as solar, wind, water, waste, and geothermal energy, emit minimal to no greenhouse gases or pollutants during operation. These sources are considered crucial for combating climate change and supporting sustainable development. However, the production of electricity, like most industries, generates waste. Comparisons show clear differences: fossil fuel plants produce the largest total waste mass (primarily combustion ash, flue gas desulfurization residues, and wastewater sludge), while nuclear facilities generate a minimal volume but high-activity spent fuel and long-lived radioactive materials. Solar PV systems generate significant end-of-life electronic waste and glass encapsulant, and wind turbines yield moderate composite blade residues. Hydropower sediment management and geothermal scaling contribute unique waste streams of local concern. Regardless of the energy source, responsible waste management is critical to minimize environmental impacts. This article explores the sustainability of low-carbon energy sources, specifically focusing on waste management with the aim of highlighting the need of implementing targeted strategies such as advanced recycling and material substitution in order to minimize environmental impacts and enhance the circularity of low-carbon energy systems. Full article

The accelerating generation of waste streams is observed globally. Spanning lignocellulosic biomass, plastic waste, sewage sludge, and industrial residues, this review presents both an urgent management challenge and a compelling materials opportunity. Carbon materials derived from these waste streams offer a sustainable route to functional carbons applicable in electrochemical energy storage, adsorption, heterogeneous catalysis, and high-temperature applications. Yet their rational design remains constrained by incomplete understanding of the relationships between feedstock composition, processing pathway, structural characteristics, and functional performance. This review provides an integrated analysis of waste-derived carbon materials from processing pathways to structure–property–function relationships. The principal feedstock categories are examined for their compositional characteristics and implications for carbon yield and structure. Five primary processing routes are assessed. The five routes examined are pyrolysis, hydrothermal carbonisation, physical and chemical activation, and microwave-assisted processing. They are assessed comparatively with emphasis on structural outcomes and governing parameters. The resulting structural characteristics are discussed. These are morphology, hierarchical pore architecture, surface chemistry, heteroatom doping, and crystallinity. They are discussed alongside their characterisation methods and known limitations as performance predictors. Structure–property relationships are examined quantitatively. Heteroatom-doped hierarchical porous carbons achieve 612 F/g specific capacitance. Turbostratic hard carbons deliver 450 mAh/g sodium storage with over 90% retention. Hierarchical porous carbons demonstrate CO₂ uptake of 5.0 mmol/g and dye adsorption exceeding 9000 mg/g under optimised laboratory conditions; these values reflect individual studies and are not directly comparable across systems. Biomass-derived sulfonated carbon catalysts sustain biodiesel yields above 90% over multiple cycles. Challenges of feedstock variability, process scalability, environmental compliance, and economic feasibility are addressed, and machine learning-guided design, standardised characterisation methodology, and circular economy policy frameworks are identified as key enablers for translating laboratory performance into industrial reality. Full article

While there is some agreement on estimating construction cost contingency for “known unknowns,” there is little consensus on estimating management reserves for “unknown unknowns.” Definitions of risk and uncertainty also differ between the economics and finance literature and the cost engineering literature. This paper examines how cost engineering guidance on estimating management reserves is applied in government-sponsored project cost estimates. This lack of consensus is evident in a specific program: the management, treatment, and disposal of 212,000 cubic meters of mixed radioactive and hazardous chemical waste generated by plutonium production at the Hanford Nuclear Site. Over $30 billion has been invested in treatment facilities, vitrification plants, and laboratories analyzing gases, liquids, sludges, and salt cake from 177 aging storage tanks. The remaining construction and operating costs are highly uncertain, with estimates ranging from $300 billion to $640 billion. Analyses of alternatives for constructing Hanford waste treatment facilities assume 15% contingencies and 40% management reserves. A method is presented to compute the implicit moments of Extreme Value distributions of cost estimates for different options, helping determine whether one alternative’s cost estimate stochastically dominates others. Adopting industry definitions of contingency and management reserves by federal government agencies could improve construction cost estimation in government-financed programs. Full article

Smolt production in freshwater is an essential component of the salmonid aquaculture production chain. But it generates sludge (feed waste and fish feces) that must be managed to meet environmental regulations. While sludge can be reused as a resource, there are limited empirical results about cost structures, market conditions, and energy implications in industrial aquaculture. This study analyzes sludge collection, processing, and utilization based on a single-case study of a Norwegian smolt producer (Sisomar AS). The analysis combines company-level production data, accounting information, and process descriptions. In 2023, the company produced approximately 9.2 million smolt (1184 tons of biomass), generating 140 tons of dried sludge. Sisomar’s value creation from production of bio-based fertilizer from sludge is relatively close to that of comparable mineral fertilizers, but a direct comparison here is difficult because of large variations in the prices of mineral fertilizers. The energy consumption is significantly lower for organic fertilizer from Sisomar compared to standard technology for mineral fertilizer production. Bio-based fertilizers are looked at as an important contribution to dealing with environmental challenges, and this study discusses the characteristics of how market structures have importance for this. Full article

The problem of industrial waste disposal is becoming increasingly pressing. For a long time, one of the primary methods of managing hazardous industrial waste was to dispose of it for long periods (decades) in engineered landfills. However, over time, due to various climatic, geological, and other changes, landfills begin to cause significant harm to the environment and human health. Old landfills, many built in the mid-20th century, pollute the air, soil, and groundwater. Therefore, the issue of decommissioning “old” landfills is becoming increasingly pressing. This study aimed to develop technological solutions for the safe extraction and processing of hazardous liquid waste from an aged industrial landfill. An integrated treatment chain was designed, comprising extraction, multi-barrier water treatment, vacuum evaporation, and lithification. Optimal lithification compositions were identified: for the salt concentrate–sludge–spent media mixture, a ratio of 68.2% sorbent D, 28.0% salt concentrate, and 3.8% dewatered sludge/spent media yielded a loose granular geocomposite; for oil-containing waste, the optimal ratio using lime and opoka was 1:0.9:0.5 (bottom sediments/CaO/opoka). Biotesting confirmed that the lithified waste is Hazard Class V (non-hazardous), whereas the untreated waste is Class III (moderately hazardous). The resulting geocomposite is suitable for on-site technical reclamation, closing the material cycle. Full article

Biogas production through anaerobic digestion is increasingly recognised as a strategic renewable energy pathway capable of addressing South Africa’s energy insecurity, organic waste management challenges, and climate mitigation goals. However, the water-intensive nature of anaerobic digestion raises critical sustainability concerns in water-scarce regions. This systematic review critically examines the water footprint of biogas-based bioenergy systems, with a specific focus on South Africa’s water-stressed context, to understand how water availability, feedstock selection, digester configuration, and governance frameworks influence system viability and scalability. This study adopts a systematic literature review (SLR) approach guided by the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) methodology; peer-reviewed literature published between 2010 and 2025 was retrieved from Scopus and Web of Science and synthesised through descriptive analysis and qualitative meta-synthesis. The review integrates blue, green, and greywater footprint concepts to assess water use across diverse biogas pathways, including livestock manure, agricultural residues, food waste, wastewater sludge, and aquatic biomass. Findings indicate that wet digestion systems, dominant in South Africa, are highly sensitive to freshwater availability, particularly where slurry dilution relies on blue water. In contrast, wastewater-integrated, semi-wet, and co-digestion systems substantially reduce freshwater demand while enhancing methane yields and process stability. The reuse of greywater, industrial effluents, and digestate emerges as a key strategy for lowering water footprints and strengthening circular water–energy linkages. Despite strong technical potential, the adoption of water-efficient anaerobic digestion systems remains constrained by fragmented governance, infrastructure deficits, and limited empirical data on dry and low-water digestion technologies. The review concludes that embedding water footprint considerations into bioenergy planning, policy, and system design is essential for the sustainable expansion of biogas in South Africa. Integrated water–energy–waste governance, coupled with targeted technological innovation, is critical to ensuring that biogas development enhances both energy security and water sustainability in water-scarce regions. Full article

Industrial and municipal wastewater may contain substances that inhibit biological processes in wastewater treatment plants (WWTPs), posing risks to operational stability and environmental protection. The aim of this study is to evaluate the practical suitability of the ISO 8192:2007 respiration inhibition test for assessing the toxicity of wastewater. Nitrified activated sludge from a municipal WWTP was used to analyze wastewater from three industrial companies, wastewater from several discharge locations at a hospital, and WWTP influent. Oxygen consumption and inhibition were determined at sample-specific dilution levels and the reference substance 3,5-dichlorophenol. Two samples from the dental department of the hospital showed toxic effects on activated sludge respiration (inhibition > 50%), while no toxic effects were observed in the remaining samples. Several samples exhibited stimulatory effects (inhibition < 0%), indicating the presence of readily biodegradable organic matter. However, inhibitory effects (0–50% inhibition) were detected in individual wastewater samples at higher concentrations. This demonstrates that the method can detect toxicological changes in wastewater and is suitable for routine monitoring and early warning in WWTPs. Full article

Coagulation-based technologies are increasingly recognized as key for controlling fluoride and hexavalent chromium in urban water and wastewater. Combined geogenic and industrial sources often drive chronic exposure and create an underrecognized public health burden. This review synthesizes current knowledge on the occurrence, speciation, and toxicology of F⁻ and Cr(VI) in urban systems, links regulatory targets to health outcomes, and critically examines conventional, advanced, and electrochemical coagulation processes for their removal under realistic water-quality conditions. Mechanistic sections describe how aluminum-, iron-, magnesium- and zirconium-based coagulants, including pre-polymerized and composite formulations (e.g., IPC-type coagulants, PSiFAC-Mg, ZrCl₄), remove fluoride via Al–F complexation, Al–F–OH co-precipitation, ion exchange, and sweep flocculation, while Cr(VI) control relies on Fe(II)-mediated reduction to Cr(III), followed by adsorption and co-precipitation with metal hydroxides. The review assesses how water chemistry and operating conditions affect single- and multi-contaminant removal, highlighting competition among fluoride, Cr(VI), nutrients, and other oxyanions. Performance data from bench-, pilot-, and selected full-scale studies show that optimized coagulation and electrocoagulation can substantially reduce fluoride and Cr(VI) (to drinking-water-relevant levels) in diverse urban waters, but also reveal persistent issues of sludge generation and stability, residual metals, process robustness, and cost. The review identifies priorities, including long-term urban-scale assessments, low-toxicity green coagulants, life-cycle and health impact assessments, and real-time coagulation control for fluoride and Cr(VI). Full article

To mitigate the impact of global climate change, countries worldwide must take necessary measures to address this environmental issue. China’s goals of carbon peaking and carbon neutrality and the “1 + N” policy framework have provided guidance for various industries and enterprises in advancing carbon accounting, carbon reduction, and green transformation. This study focuses on the sludge dewatering facility of a typical water treatment plant, which uses water from the South-to-North Water Diversion Project as its water source. Based on its construction and operational data, the carbon emissions at different phases were calculated with the emission factor method in the study, and the composition of these emissions was analyzed. The results show that during the three-year construction period, the sludge dewatering facility emitted a total of 1385.57 tons of CO₂-eq, with materials being the main source of carbon emissions. While in the one-year operation period, the facility generated 19.38 tons of CO₂-eq only, with electricity consumption being the primary contributor, followed by chemicals consumption. In conclusion, both the short-term intensive emissions during the construction phase and the long-term cumulative emissions during the operation phase should be considered, so that an integrated mitigation effect can be achieved across the construction and operation stages. This highlights the necessity of adopting a life-cycle perspective in carbon reduction strategies within the defined system boundary, while also supporting the sustainable planning and management of water treatment infrastructure. Full article

Recently, polyhydroxyalkanoates (PHAs) have gained significant attention as a bioactive material for replacing petrochemical plastics. PHAs can be produced by microorganisms growing on sludge substrates. In this study, fish-processing wastewater was investigated as an alternative substrate for PHA production using Bacillus cereus. Wastewater dilution, carbon-to-nitrogen ratio modification, and the addition of fish oil as a lipidic substrate were examined, and bacterial growth and biopolymer production were optimized. First, wastewater was diluted (25–100%) and examined. The 50% dilution treatment was selected, yielding a CDM of 0.426 g/L and a PHA content of 6.69%. In subsequent steps, the effects of wastewater fermentation and bacterial adaptation prior to the main production processes were investigated. According to the results, the 50% and 100% fermented treatments exhibited higher CDM values (0.970–1.022 g/L) compared to the non-fermented treatments. Cultures inoculated with adapted bacteria showed superior performance (CDM: 1.455 g/L, PHA: 0.499 g/L, PHA content: 34.63%) relative to non-adapted treatments. The effect of the carbon-to-nitrogen (C/N) ratio was also optimized by supplementing two carbon sources: glucose and crude fish oil. The optimal treatment T1 (effluent + 0.6 g/L glucose) had a CDM of 1.32 g/L and a PHA content of 0.215 g/L. Treatment 1, which consisted solely of effluent and fish oil, exhibited higher values (CDM: 1.12 g/L, PHA: 0.65 g/L) and was therefore considered the cost-effective treatment. Subsequently, a scale-up process was conducted in a 4 L bioreactor over 300 h under semi-continuous, long-term cultivation. The optimal harvesting time for the biopolymer was achieved during the fourth cycle (180–240 h). The produced biopolymer was characterized using FTIR, NMR, TGA, DSC, SEM, and XRD analyses, confirming the production of a copolymer, specifically poly(3-hydroxybutyrate-co-3-hydroxyvalerate). This study used wastewater from the fish industry for the production of biodegradable polyhydroxyalkanoates. Full article

The chemical equilibria of metal ions between soil solution and solid phases govern the solubility of metals in soil. However, the identity of these controlling phases remains poorly understood in historically polluted environments. This study aimed to identify the dominant mineral phases regulating the activities of Zn²⁺, Cd²⁺, Pb²⁺, and Ni²⁺ in soils subjected to long-term contamination from sewage sludge, municipal solid waste, river water, and industrial effluents across India. The soil samples were collected from various locations historically polluted by sewage sludge, municipal solid waste, polluted river water and industrial effluents. The free ion activities of Zn²⁺ (pZn²⁺), Cd²⁺ (pCd²⁺), Pb²⁺ (pPb²⁺) and Ni²⁺ (pNi²⁺) in soil pore water were estimated using the geochemical speciation model WHAM-VII. The metal ion activities were higher in industrial effluents and solid waste-treated soils as compared to other contaminated soils. The solubility of Zn and Cd in soils contaminated with Zn-smelter effluents was controlled by franklinite (ZnFe₂O₄) in equilibrium with goethite (α-FeOOH) and otavite (CdCO₃), respectively. Identification of minerals further reveals that nickel ferrite (NiFe₂O₄) in equilibrium with lepidocrocite (γ-FeOOH) governs the activity of Ni²⁺ in cycle factory effluent-irrigated soils of Sonepat, Haryana. At the municipal solid waste-contaminated site, the Pb²⁺ activity was controlled by exchangeable Pb in soils, whereas Zn²⁺ activity was governed by willemite (Zn₂SiO₄) in equilibrium with quartz (SiO₂). These findings provide new insights into mineralogical controls on heavy metal solubility under diverse contamination scenarios. Formation of highly soluble minerals like otavite, willemite, and nickel ferrite suggested the potential ecological risk of Cd, Zn, and Ni, respectively, in polluted soils. Full article

The environmental challenges posed by heavy metal contamination in sludge leachate are becoming increasingly severe, necessitating the development of highly efficient remediation technologies. Among various treatment approaches, magnetic adsorbents have garnered significant attention as a promising solution due to their outstanding adsorption performance, convenient magnetic separation characteristics, and potential for regeneration. This paper systematically reviews the latest research progress on magnetic adsorbents designed for the complex system of sludge leachate, covering synthesis methods, surface functionalization, adsorption mechanisms, and performance evaluation. Key synthesis strategies are analyzed, including magnetic core preparation, inorganic coating, carbon composites, organic polymer grafting, functional molecule impregnation, and metal–organic framework (MOF) composites. The mechanisms by which these strategies influence material adsorption capacity, selectivity, and stability are elucidated. Despite significant achievements in laboratory studies, practical applications still face challenges such as large-scale synthesis, regeneration efficiency, cyclic stability, and adaptability to complex water bodies. Future research should focus on green synthetic pathways to advance the industrial application of structurally functional magnetic composite materials, providing systematic solutions from material design to process optimization for the sustainable remediation of heavy metal contamination in sludge leachate. Full article

This study evaluated the anaerobic digestibility of primary sludge from two wastewater treatment plants (WWTPs), Leeuwkuil and Rietspruit. Anaerobic biodegradation produces biogas as an energy carrier. Sludge from the primary settling tanks was tested in batch mode as a mono-substrate, without pretreatment or external inoculum. Proximate and ultimate analyses were used to estimate theoretical methane production. Anaerobic digestibility tests were then performed using an Automatic Methane Potential System (AMPTS^® II, Bioprocess Control). The volatile-to-total solid (VS/TS) ratios were 71 for Leeuwkuil and 13 for Rietspruit. Theoretical methane yields for Leeuwkuil sludge were 257–293 L/kg VS. For Rietspruit, the Buswell and Dulong methods gave negative theoretical BMP values (−76 and −15 L/kg VS), suggesting these models may be unsuitable for high-oxygen-content substrates. Measured methane production was 11.3 L/kg VS for Leeuwkuil and 4.8 L/kg VS for Rietspruit, indicating low anaerobic digestibility relative to solid content. Leeuwkuil primary sludge nevertheless showed better potential as a co-substrate for methane production than Rietspruit sludge. Rietspruit sludge may pose challenges for anaerobic digestion, though pretreatment or co-digestion could improve performance. Based on measured methane productivities, each WWTP could generate about 0.5 MWh of electricity per day from biogas. The study shows that primary sludge digestibility depends strongly on the physico-chemical characteristics of the influent wastewater. Primary sludge can often be improved for digestion through chemical/physical pretreatment and co-digestion with secondary sludge or suitable agro-industrial organic residues. Full article

Integrated waste management through vermicomposting combined with biochar amendments represents an innovative approach for sustainable resource recovery. This study evaluated the effects of sugarcane bagasse biochar (SBB) at 0%, 5%, and 10% application rates on Eisenia fetida performance and vermicompost quality during preincubation-vermicomposting of sewage sludge and press-mud mixtures. The 10% SBB treatment significantly (p < 0.05) enhanced earthworm biomass (72.3% increase) and cocoon production (24.8 ± 1.8 per earthworm vs. 12.3 ± 1.2 in control). Lignocellulosic degradation improved substantially, achieving 22.6%, 10.7%, and 38.8% degradation for cellulose, hemicellulose, and lignin, respectively. Macronutrient concentrations increased significantly: TN by 38.4%, TP by 15%, and TK by 21.4% compared to initial mixtures. Moreover, total heavy metal concentrations decreased significantly during vermicomposting, with reductions of 8.1–8.7% for Pb, 5.3–7.6% for Cd, and 3.0–4.8% for Cr, with reduced bioavailability factors indicating enhanced metal stabilization. The final vermicompost exhibited optimal maturity indices, including a C:N ratio of 15.4 ± 0.2 and improved electrical conductivity. Results demonstrate that 10% sugarcane bagasse biochar amendment facilitates efficient concurrent management of sewage sludge and sugarcane industrial wastes while producing high-quality organic fertilizer with enhanced nutrient content, reduced heavy metal bioavailability, and accelerated stabilization for sustainable agricultural/horticultural applications. Full article

This critical review examines the evolution of mathematical modeling approaches for aerobic digestion processes in food industry waste management, highlighting their role in operational optimization and dynamic prediction. In recent years, increasing pressure for sustainable waste management, circular bioeconomy strategies, and process intensification in the food industry has accelerated the development of mathematical tools for describing complex biological treatment systems, making a critical synthesis of available modeling approaches particularly timely. Starting from mass conservation principles, simple kinetic models such as first-order and Monod models are analyzed. These models assume homogeneity and perfect mixing but fail to capture the heterogeneity of effluents rich in variable carbohydrates, proteins, and lipids. Structural limitations, including numerical rigidity, parametric non-identifiability, and idealized assumptions that underestimate spatial gradients and stochastic fluctuations, are examined. In continuous systems, coupled substrate–biomass–oxygen dynamics, washout phenomena, and extensions toward partial differential equations for representing real heterogeneity are explored. Structured models such as Activated Sludge Models (ASMs) incorporate multicomponent fractions but face parameterization challenges exacerbated by limited industrial data availability, as less than 25% of treatment plants currently employ formal modeling frameworks. Emerging paradigms include hybrid mechanistic–machine learning approaches for prediction under perturbations, multiscale modeling, and spatially explicit modeling. Unlike previous reviews that focus primarily on technological aspects of waste treatment, this study provides a critical comparison of modeling frameworks and their applicability to different food waste matrices. A classification table distributes approaches by food matrix, revealing the dominance of simple kinetics in composting and ASMs in activated sludge systems. Finally, a progressive model selection framework based on operational objectives is proposed, balancing model complexity with predictive robustness and experimental validation to support sustainable industrial adoption. Full article