Search Results (206)

Background: The long-term success of total knee arthroplasty (TKA) is often compromised by stress shielding, which can lead to bone resorption and even implant loosening. This study employs finite element analysis (FEA) to compare the stress-shielding effects of a knee prosthesis made from polyether ether ketone (PEEK) with a traditional titanium Ti6Al4V implant on an osteoporotic tibial bone model. Methods: Stress distribution and the stress-shielding factor (SSF) were evaluated at seven critical points in the proximal tibia under physiological loading conditions. Results: Results indicate that the PEEK prosthesis yields a more uniform stress transmission, with von Mises stress levels within the optimal 2–3 MPa range for bone maintenance and consistently negative or near-zero SSF values, implying minimal stress shielding. Conversely, titanium implants exhibited significant stress shielding with high positive SSF values across all points. Additionally, stress concentrations on the polyethylene liner were lower and more evenly distributed in the PEEK model, suggesting reduced wear potential. Conclusions: These findings highlight the biomechanical advantages of PEEK in reducing stress shielding and preserving bone integrity, supporting its potential use to improve implant longevity in TKA. Further experimental and clinical validation are warranted. Full article

Background/Objectives: Oral cancer resection often leads to maxillofacial defects and dentition loss, compromising patients’ quality of life. Implant-supported prosthetic rehabilitation offers a reliable solution to restore function, though factors such as bone reconstruction, radiotherapy, and timing of implant placement (immediate vs. delayed) may influence outcomes. This study aimed to evaluate long-term implant survival and rehabilitation timelines in oncologic patients, comparing two cohorts (2005–2014 and 2015–2024) to assess the impact of evolving clinical practices. Methods: A retrospective cohort study was conducted at Hospital General Universitario Gregorio Marañón (Madrid, Spain), including 304 patients who underwent ablative oral cancer surgery and subsequent implant-based rehabilitation between 2005 and 2024. Data on demographics, oncologic treatment, reconstruction, implant timing, and prosthetic rehabilitation were collected. Outcomes were compared using Kaplan–Meier analysis and appropriate statistical tests between the 2005–2014 (n = 122) and 2015–2024 (n = 182) cohorts. Results: A total of 2341 Ticare Implants^® were placed, supporting 281 prostheses. Implant placement during primary surgery increased from 41% to 71% (p < 0.001). The median time from surgery to prosthesis significantly decreased from 24 to 15 months (p < 0.001). Five-year implant survival was 95% in the early cohort versus 97% in the later cohort. Implant survival was comparable between irradiated and non-irradiated patients (~94–96%). Fixed prostheses became more frequent (92% vs. 79%, p = 0.002). Conclusions: Implant-supported rehabilitation in oncologic patients is highly feasible and durable, with improved timelines and functional outcomes associated with early implant placement and modern digital planning strategies. Full article

Background/Objectives: This study aimed to assess the long-term clinical performance of full-arch fixed restorations made of fiber-reinforced composite (FRC) supported by four ultra-short implants (4.0 × 5.0 mm) in patients with edentulous, atrophic mandibles. Methods: Ten patients were treated at Sapienza University of Rome and monitored over a 10-year period. Each case involved the placement of four plateau-design implants with a pure conometric connection and a calcium phosphate-treated surface. The final prostheses were fabricated using CAD/CAM-milled Trinia^® fiber-reinforced composite frameworks. Clinical parameters included implant and prosthesis survival, marginal bone level (MBL), peri-implant probing depth (PPD), and patient-reported outcome measures (PROMs). Results: Implant and prosthesis survival reached 100% over the 10-year follow-up. MBL data showed a minor bone gain of approximately 0.11 mm per 5 years (p < 0.0001). PPD remained stable under 3 mm, with a minimal increase of 0.16 mm over the same period (p < 0.0001). PROMs reflected sustained high patient satisfaction. No technical complications, such as chipping or framework fracture, were observed. Conclusions: Rehabilitation of the edentulous mandible with ultra-short implants and metal-free FRC prostheses proved to be a minimally invasive and long-lasting treatment option. The 10-year follow-up confirmed excellent implant and prosthetic outcomes, favorable peri-implant tissue health, and strong patient satisfaction. Nonetheless, further studies with larger sample sizes are needed to confirm these encouraging results and strengthen the clinical evidence. Full article

Background. Extensive partial edentulism alters the biological and functional balance of the stomatognathic system, requiring targeted pre-prosthetic procedures to optimize treatment outcomes. Objectives. The aim of this study was to assess the extent of improvement in the clinical–biological scores of the prosthetic field in patients with extensive edentulism, following pre-prosthetic interventions. Materials and Method. This prospective, cross-sectional study investigated 194 subjects with extensive partial edentulism. Clinical–biological scores, initially and following the pre-prosthetic phase, were recorded using a scoring system that evaluated dental and periodontal status, bone and mucosal support, occlusion, and mandibulo-cranial relationships. Statistical comparisons of clinical–biological scores were related to the type of prosthetic therapy. Statistical significance was considered at a p-value < 0.05. Results. There was an overall significant improvement in the clinical–biological scores initially (mean value 20.2) and after pre-prosthetic procedures (mean value 23.22) (p < 0.001). When treatment groups were divided, the implant-assisted prosthesis group showed the best improvement in all domains, followed by the conventional fixed-prostheses group (p < 0.01). Dental support improved significantly in those with semi-rigid composite prostheses (p = 0.014), while periodontal support was improved in both fixed- and hybrid-implant groups. Mucosal and bone support improved mostly in the fixed-implant groups (p = 0.014). Conclusions. Pre-prosthetic procedures significantly enhance the biological and functional readiness of the prosthetic field, with the degree of improvement influenced by the complexity and type of planned prosthetic rehabilitation. The findings underscore the value of individualized pre-prosthetic protocols as an essential component of prosthetic treatment planning. Full article

This article presents a Cyber-Physical System Interface (CPSI) for a patented implantable esophageal prosthesis. Designed for in vivo use, the CPSI has been implemented in a MATLAB (version R2021b) simulation environment integrated with real-time data from sensors relevant for monitoring the prosthesis’s physical positioning and environmental interactions, aggregated through an Arduino external system. This setup enables the modeling and analysis of system behaviors in a controlled setting. The paper discusses the sensors, hardware and software components supporting a wide range of applications, and the method chosen for sensor-to-display flow. The case study demonstrates two monitoring system applications: one analyzes the influence of variations in the prosthesis geometry, while the other evaluates the tissue response to the implant. The proposed framework and implementation are highly relevant for a wide range of in vivo implants and related systems. Full article

Background. Digital dentistry continues to evolve, offering improved accuracy, efficiency, and patient experience across various prosthodontic procedures. Many previous reviews have focused on digital applications in prosthodontics. But the use of a fully digital workflow for full-arch implant-supported prostheses in edentulous patients remains an emerging and underexplored area in the literature. Objective. This article presents a comprehensive methodological review of the digital workflow in full-arch implant-supported rehabilitation. It follows a structured literature exploration and synthesizes relevant technological processes from patient assessment to prosthetic delivery. Methods. The relevant literature was retrieved from the PubMed database on 20 June 2024, to identify the most recent and relevant studies. A total of 22 articles met the eligibility criteria and were included in the review. The majority included case and technical reports. Results. The review illustrates the integration and application of digital tools in implant dentistry, including cone-beam computed tomography (CBCT) exposure, intraoral scanning, digital smile design, virtual patients, guided surgery, and digital scanning. The key findings demonstrate multiple advantages of a fully digital workflow, such as reduced treatment time and cost, increased patient satisfaction, and improved interdisciplinary communication. Conclusions. Despite these benefits, limitations persist due to the low level of evidence, technological challenges, and the lack of standardized protocols. Further randomized controlled trials and long-term clinical evaluations are essential to validate the effectiveness and feasibility of a fully digital workflow for full-arch implant-supported rehabilitation. Full article

Background/Objectives: the precise application of torque during prosthetic screw tightening is essential to the long-term success and mechanical stability of implant-supported restorations. This study aimed to evaluate the influence of practitioner experience, glove material, screwdriver length, and hand moisture on the maximum torque value (MTV) generated during manual tightening. Methods: thirty participants, comprising 10 experienced professors and 20 senior dental students, performed tightening tasks under six hand conditions (nitrile gloves, latex gloves, and bare hands, each in dry and wet environments) using two screwdriver lengths (21 mm and 27 mm). The torque values were measured using a calibrated digital torque meter, and the results were analyzed using a linear mixed model. Results: professors applied significantly higher torque than students (16.92 Ncm vs. 15.03 Ncm; p = 0.008). Nitrile gloves yielded the highest torque (17.11 Ncm), surpassing bare hands significantly (p = 0.003). No statistically significant differences were found for screwdriver length (p = 0.12) or hand moisture (p = 0.11). Conclusions: these findings underscore the importance of clinical proficiency and glove material in torque delivery, providing evidence-based insights to enhance procedural reliability and training standards in implant prosthodontics. Full article

Introduction: Monteggia fractures, first described by Giovanni Battista Monteggia, involve a fracture of the proximal ulna with anterior dislocation of the radial head. Bado’s 1967 classification divides these injuries into four types. Rare mixed patterns exist, overlapping with other forearm injuries such as Galeazzi and Essex–Lopresti lesions. These complex fractures/dislocations pose significant diagnostic and therapeutic challenges and are not adequately represented in current classification systems. Methods and Case Presentation: We report the case of a 56-year-old woman with a complex forearm injury sustained from a fall, presenting with radial head fracture/dislocation, mid-shaft radial fracture, distal ulna fracture, and ulnar collateral ligament rupture. Intraoperative imaging confirmed DRUJ stability and partial interosseous membrane disruption. Surgical management included radial head prosthesis implantation, radial shaft fixation with an anatomical locking plate, intramedullary nailing of the distal ulna, and ligament reconstruction. At two-year follow-up, the patient demonstrated full recovery of elbow flexion–extension and satisfactory forearm function. A narrative literature review was also conducted, focusing on hybrid injury variants. Results: Intraoperative examination under anesthesia revealed good elbow stability with 130° flexion, 15° extension lag, and forearm pronation/supination of 70°/60°. An initial Mayo Elbow Performance Score (MEPS) of 65 was recorded, limited by range of motion and stability. Pain during passive mobilization was mild, with a Visual Analogue Scale (VAS) score of 3/10. Postoperative recovery included 15 days of immobilization followed by structured rehabilitation. At two years, the patient regained full elbow flexion–extension but had residual deficits in pronation–supination, attributed to pre-existing conditions. Conclusions: This case illustrates a previously unreported hybrid Monteggia variant, combining features of Monteggia, Galeazzi, and Essex–Lopresti injuries. It highlights the limitations of current classification systems and supports the need for an expanded diagnostic framework. Successful management required a multidisciplinary surgical approach tailored to the injury’s complexity. Further studies are warranted to refine classification and treatment strategies for these rare combined injuries. Full article

Background: The potential impact of the number of implants (four vs. six) on the implant survival of implant-supported fixed complete dentures (IFCDs) remains inconclusive and subject to ongoing debate. This study compared the implant survival of immediately loaded four vs. six IFCDs, delivered using a patient-centered systematic treatment plan, in a large patient cohort assessed with consistent diagnostic methodology and comprehensive longitudinal follow-up. Methods: This retrospective study included records of 943 patients receiving 5989 implants with an average follow-up of 5.0 ± 3.2 (range 0–17) years delivered using a systematic clinical decision support system (CDSS) based on a defined alveolar atrophy classification (CC). Implant survival was analyzed considering predictor variables comprising treatment and anatomic and systemic health-related factors at the overall, maxillary, and mandibular levels using Kaplan–Meier analysis, log-rank tests, and single-predictor and multilevel Cox proportional hazard analysis derived from causal direct acyclic graph methodologies. Results: The 2- and 5-year cumulative survival rates (CSRs) of four and six IFCDs were comparable (2-year: 98.6% vs. 98.4%, p = 0.362; 5-year: 98.8%, 98.7% p = 0.346). The differences between four and six IFCDs were more pronounced at the maxillary levels, specifically after 2 years (97.7% vs. 98.6% p = 0.084), and at the mandibular level after 5 years (98.6% vs. 99.4%, p = 0.136.). Multilevel Cox proportional hazard models at overall and jaw levels adjusted for confounding factors indicated that implant loss was correlated to jaw type and age at overall and age alone at the mandibular level. Alveolar atrophy (CC) defined within the adopted CDSS was not robustly associated with implant loss. Conclusions: Under the guidance of a systematically applied patient-centered CDSS, four and six IFCDs demonstrated high and comparable mid-to-long-term implant survival rates irrespective of the level of analysis or statistical model used to adjust for confounding factors. Prosthetic and technical complications were not evaluated and were, therefore, beyond the scope of this study. Full article

Purpose: To evaluate the clinical and histological outcomes of patients that receive implant-supported crowns after vacuum plasma surface treatment (VPST) of biomaterials used in socket preservation (SP) and guided bone regeneration (GBR). Materials and methods: This study was designed as a case series. Patients in need of tooth extraction and socket preservation or guided bone regeneration were enrolled. The socket preservation technique was performed after tooth extraction using a heterologous collagen bone graft and a collagen xenomatrix, both activated with vacuum plasma. Meanwhile, a two-stage horizontal ridge augmentation was performed using a customized titanium mesh and a mix of autologous (untreated) and heterologous (treated) bone grafts, along with a treated collagen membrane. ACTILINK Reborn with Universal Vortex Holder (Plasmapp Co., Ltd., Daejeon, Republic of Korea) was used to treat all biomaterials. The outcome measures were implant and prosthesis failures, complications, and histological examination. Soft and hard tissue samples were collected at the time of implant placement only in patients treated with SP. Results: A total of six patients were treated—three with socket preservation and delayed implant placement, and three with staged GBR. No implant or prosthesis failed. One customized titanium mesh broke after plasma treatment, requiring replacement with a pericardium membrane. No other complications occurred. Histological analysis at three months post-surgery revealed well-vascularized newly formed bone at different stages of maturation with integrated bone graft particles, while the soft tissue appeared to be physiologically structured. Conclusion: VPST may enhance the hydrophilicity of biomaterials, supporting favorable healing outcomes in SP and GBR. Further randomized controlled trials with appropriate sample size calculations are needed to confirm these preliminary results. Full article

Hip replacement is a widespread surgical procedure that eliminates pain and restores motor functions of the pathologically altered hip joint. The issue lies in the lack of pre-operative strength calculations for implant shapes. So, they tend to break after surgery or damage the bone due to the complex stress–strain state. In the present paper, we studied the stress–strain state and ultimate load of S-type canine femoral implants based on titanium alloy Ti6Al4V using finite element analysis for static and cyclic loads. X-ray computed micro tomography data were used to construct the models. Re-engineering and restoration of the 3D geometry of the product were conducted. Strength analysis was performed in the finite element analysis software package Ansys Mechanical was used for various types of implant support. Locations with stress concentrators were identified, and ultimate loads on the implant were obtained. The influence of the rigidity of the support on the prosthesis stem was also studied. For the case of rigid support, the stress–strain state of the prosthesis was studied and the ultimate load was found to be 30.1 kg. Full article

Background/Objectives: The satisfaction of patients following maxillary full-arch rehabilitation is crucial in assessing treatment effectiveness. This one-year study evaluated patients’ satisfaction, quality of life, and aesthetic perception after receiving the Maxilla-for-All^®/All-On-X treatments, which combine standard, pterygoid, trans-sinus, and zygomatic implants to support a fixed prosthesis and offer a graftless solution that reduces morbidity and treatment time. Methods: A prospective cohort study using convenience sampling of subjects treated for severe maxillary atrophies was conducted on patients receiving immediate implant-supported full-arch fixed prostheses. The Oral Health Impact Profile (OHIP-14) and Psychosocial Impact of Dental Aesthetics Questionnaire (PIDAQ-23) were administered preoperatively and one year post-treatment. Patients were grouped based on the presence or absence of complications (surgical, technical, and mechanical) and Wilcoxon tests were used for comparison (significance level = 0.05). Results: A total of 56 patients (29 female, 27 male) participated, with no implant or prosthesis failures. Eleven patients reported unilateral sinus membrane perforation, and seven had technical or mechanical complications. Preoperatively, 69% of patients rated their oral condition as unfavorable according to the OHIP-14; this dropped significantly to 21.8% post-treatment (p-value < 0.0001). After one year, the average PIDAQ-23 score improved significantly from 44.7 ± 16.6 to 6.8 ± 5.3 (p-value < 0.0001). No significant differences were observed between patients with or without complications (p-values ranging from 0.5270 to 0.8920). Conclusions: Full-arch rehabilitation using Maxilla-for-All^®/All-On-X treatments significantly improved both aesthetic perception and chewing function in patients with severe maxillary atrophies. They reported a substantial reduction in oral health-related discomfort, as shown by a significant decrease in OHIP-14 scores one year post-treatment. Clinical or technical complications did not significantly impact patients’ quality-of-life outcomes or satisfaction, supporting the reliability of this treatment protocol. Full article

Background: Modern dentistry strives to achieve increasingly less invasive procedures as the ultimate therapeutic goal. The careful selection of suitable candidates for immediate dental implants can offer an opportunity to reduce treatment time, lower the relative costs and improve overall patient satisfaction. Methods: A systematic search was conducted in March 2025, without any time restrictions, in Medline, Pubmed and Web of Science databases. To identify other related references, further research was performed. Articles related to current knowledge about the immediate loading of dental implants supporting fixed partial prosthesis in the posterior region were included. Articles not available in abstract form and articles not published in the English language were excluded. Results: A total of ten studies were eligible for inclusion in the current study. The search strategy resulted in a survival rate ranging from 86% to 100%, and a failure rate of less than 21.6%, with a mean follow-up of 55.6 months. Statistical analysis revealed no significant differences in survival rates between implants placed in the maxilla and mandible (χ² = 0.42, p = 0.81, df = 2). Follow-up varied from one to ten years, reflecting variability both in study design and duration. Conclusions: The selected studies highlight the heterogeneity in immediate loading protocols for implant-supported fixed partial prosthesis in the posterior regions, emphasizing the variability in prosthetic materials and implant types, suggesting that immediate loading is a reliable, patient-centered therapeutic option with favorable long-term outcomes. Full article

Background/Objectives: Surgical removal is the treatment of choice for cholesteatoma control. Depending on the size, the surgery involves partial resection of the ossicular chain and, if necessary, the bony skull base. Titanium foreign materials (prostheses, meshes) can be used to restore sound transmission and to cover larger defects of the skull base. After the operation, recurrence and residual control are necessary. This can be achieved by means of second-look surgery or an MRI examination with a non-EPI DWI sequence. Similarly to other metal implants, artifacts may occur in the image due to the titanium used. In this study, we assessed the magnitude of the MRI hardware differences induced by titanium prostheses and meshes and whether these differences could obscure cholesteatoma detection. Methods: 28 MRI examinations (T1-, T2-, non-EPI DWI sequences) in 14 males and 14 females (5.2–92.4 years) after cholesteatoma surgery and single-staged implantation of a PORP, TORP, or titanium mesh were considered. The size of the respective artifacts was measured, and the mean artifact sizes of the respective prosthesis types were compared. A second look surgery was performed in all cases due to the MRI result or clinical findings. Both were also compared. Results: Artifacts occurred in all titanium foreign bodies depending on the used MRI sequence (PORP, TORP, Mesh). We found a positive association between the size of the prosthesis and the size of the artifact. All subsequent second-look surgeries confirmed the MRI examinations according to a positive control for the presence of cholesteatoma. The detection rate was 82.1%. All false results were false negatives, and there were no positive results. Conclusions: Titanium material-related artifacts might influence the MRI detectability of recurrent cholesteatoma. Small cholesteatoma might be missed by an MRI-based follow-up. This finding supports the reevaluation of single-stage versus staged reconstruction modern approaches. Full article

Pseudomonas aeruginosa is considered as more difficult to treat than other Gram-negatives in patients with acute periprosthetic joint infections (PJIs). However, clinical data to support this hypothesis are lacking. This retrospective multicenter cohort study included 39 patients with acute PJIs caused by P. aeruginosa and 84 control patients with another Gram-negative bacillus (i.e., Enterobacterales). Both groups were managed by surgical debridement, antibiotics, and implant retention (DAIR). Treatment failure within one-year follow-up was defined as prosthesis extraction, a clinical need for suppressive antibiotic treatment and/or PJI-related death. Distribution of affected joints, and revision versus primary arthroplasties, did not differ between groups. Most PJIs were polymicrobial (87% in cases, 81% in control patients, p = 0.451). Surgical and antibiotic management was similar between groups. Treatment failure did not differ between groups: 5/39 cases (12.8%) and 14/84 control patients (16.7%, p = 0.610). An acceptable success rate of acute PJI caused by P. aeruginosa when treated with DAIR was observed. This success rate did not differ compared to PJIs caused by Enterobacterales. Therefore, P. aeruginosa should not be considered a more difficult to treat microorganism compared to other Gram-negatives. No additional surgical or antimicrobial interventions are needed when patients can be treated with a fluoroquinolone. Full article