Search Results (11)

Rare earth elements (REEs) and trace elements, due to their relative stability during sedimentary processes, are effective geochemical proxies for sediment provenance. In the Dongdaohaizi Depression of the eastern Junggar Basin, the provenance of the Middle Jurassic Sangonghe Formation remains contentious. In this study, representative sandstone samples were systematically collected from all three members of the Sangonghe Formation in both the Dongdaohaizi Depression and its western margin. Through comprehensive petrographic and geochemical analyses, we obtained the following results. The Sangonghe Formation is primarily composed of feldspathic lithic sandstones, lithic sandstones, and minor lithic–feldspathic sandstones. The heavy mineral assemblage includes zircon, garnet, chromite, and rutile, suggesting source rocks of intermediate to acidic igneous, metamorphic, and mafic lithologies. The total REE contents range from 101.84 to 192.68 μg/g, with an average of 161.80 μg/g. The ∑LREE/∑HREE ratios vary from 6.59 to 13.25 (average 10.96), and the average δEu values are close to 1. The δCe value ranges from 1.09 to 1.13 (average 1.11). Trace element discrimination diagrams, including La-Th-Sc, Th-Co-Zr/10, Th-Sc-Zr/10, and La/Y-Sc/Cr ternary plots, indicate that most samples fall within the continental island arc domain, with a few plotting in the passive continental margin field. Comparison with potential surrounding source regions reveals dual provenances: an eastern source from the Kalamaili Mountains and a western source from the Zhayier Mountains. During the Early Jurassic, these two orogenic belts acted as distinct sediment sources. The Zhayier Mountains provided stronger input, with fluvial and tidal processes transporting sediments into the basin, establishing the primary subsidence center in the west of the depression. By the Middle Jurassic, continued thrusting of surrounding fold belts caused a migration of the lake center and the main depocenter to the western edge of the Dongdaohaizi Depression, while the former depocenter gradually diminished. Furthermore, sustained erosion and denudation of the Mosowan Uplift during the Early–Middle Jurassic reduced its function as a structural barrier, thereby promoting increased mixing between eastern and western sediment sources. The study not only refines existing paleogeographic models of the Junggar Basin, but also demonstrates the utility of REE–trace geochemistry in deciphering complex provenance systems in tectonically active basins. Full article

The erosion of igneous rocks affects the structural and spontaneous combustion characteristics of coal. A series of tests were conducted, including programmed heating, thermogravimetric analysis, FT-IR spectroscopy, low-temperature nitrogen adsorption, and pressed mercury experiments on samples from primary coal and coal eroded by igneous rocks from the Tashan Mine and Xiaonan Mine within the same coal seam. Based on these experiments, we analyzed various properties of coal, such as the oxidation characteristics, spontaneous combustion limit, active functional group content, chemical structure, and pore structure, from both macroscopic and microscopic perspectives. The results indicated significant trends after the erosion of igneous rocks: (1) there were increases in the oxygen consumption rate, as well as the CO and CO₂ release rates; (2) the upper limit of air leakage intensity increased, the minimum thickness of floating coal decreased, and the lower limit of oxygen volume fraction decreased; (3) there was a decrease in the activation energy required for coal ignition; (4) there was a decrease in the active functional group content while improving the structural stability; and (5) there were the alterations in the pore structure of coal. These promoted the oxidation reactions between oxygen and the active groups within the coal matrix, increasing the propensity for spontaneous combustion, particularly in the igneous rocks with low oxidation activity. Full article

The South China Craton comprises the Yangtze and Cathaysia blocks and is one of the largest Precambrian continental blocks in East Asia. However, the early geological and geographical evolution of the Cathaysia block is relatively poorly understood, due to the sparse exposure of pre-Neoproterozoic rocks and reworking during Phanerozoic polyphase magmatism and metamorphism. In this contribution, we carried out detrital zircon U-Pb geochronology and sedimentary analyses on five Proterozoic meta-sedimentary rocks collected from the northeastern Cathaysia block, which belong to the previously defined Chencai, Mayuan, and Mamianshan Groups (strata). LA-ICP-MS U-Pb dating results of the detrital zircons show various ~1.85–1.35 Ga maximum depositional ages. They are significantly older than the previously constrained Neoproterozoic formation ages of these Proterozoic strata of northeastern Cathaysia, suggesting that their deposition and formation were probably initiated as early as the late Paleoproterozoic. Provenance analyses reveal that the late Paleoproterozoic to early Mesoproterozoic detrital zircons with igneous-origin were derived from in situ contemporary crystalline basements in eastern Cathaysia. In addition, by implication, the easternmost part of Cathaysia was probably an emerged area (i.e., the “proto-Cathaysia Land”) under active erosion. It had a ~NWW orientation and provided detrital sediments to the neighboring marine basin (i.e., the Cathaysia Sea) during the late Paleoproterozoic to early Mesoproterozoic. Finally, the Paleoproterozoic evolution of Cathaysia was involved in the assembly of the Nuna supercontinent. Our results, together with the published data, reveal a distinct late Paleoproterozoic (~1.8 Ga) detrital zircon age peak, which seems to support the view that eastern Cathaysia had close tectonic affinities with terranes such as the Precambrian terranes of current northern India, in the framework of the Nuna supercontinent reconstruction. Full article

Cenozoic evaporites (gypsum and anhydrite) in southwestern North America have wide ranges of δ³⁴S (−30 to +22‰; most +4 to +10‰) and δ¹⁸O_SO4 (+3 to +19‰). New data are presented for five basins in southern Arizona. The evaporites were deposited in playas or perennial saline lakes in closed basins of Oligocene or younger age. Very large accumulations in Picacho, Safford and Tucson Basins have isotope compositions plotting close to a linear δ³⁴S-δ¹⁸O_SO4 relationship corresponding to mixing of two sources of sulfur: (1) sulfate recycled from Permian marine gypsum and (2) sulfate from weathering of Laramide-age igneous rocks that include porphyry copper deposits. In the large evaporites, sulfate with δ³⁴S > +10‰ is dominantly of Permian or Early Cretaceous marine origin, but has locally evolved to higher values as a result of bacterial sulfate reduction (BSR). Sulfate with δ³⁴S < −10‰ formed following exposure of sulfides, possibly formed during supergene enrichment of a porphyry copper deposit by BSR, and have values of δ¹⁸O_SO4 higher than those of local acid rock drainage because of participation of evaporated water in BSR. Accumulations of 30 to 100 km³ of gypsum in Picacho and Safford Basins are too large to explain as products of contemporaneous erosion of Permian and Laramide source materials, but may represent recycling of Late Cretaceous to Miocene lacustrine sulfate. Full article

Sedimentary rocks provide records of past surface and subsurface processes and environments. The first step in the study of the sedimentary rock record of another world is to learn to recognize their occurrences in images from instruments aboard orbiting, flyby, or aerial platforms. For two decades, Mars has been known to have sedimentary rocks; however, planet-wide identification is incomplete. Global coverage at 0.25–6 m/pixel, and observations from the Curiosity rover in Gale crater, expand the ability to recognize Martian sedimentary rocks. No longer limited to cases that are light-toned, lightly cratered, and stratified—or mimic original depositional setting (e.g., lithified deltas)—Martian sedimentary rocks include dark-toned examples, as well as rocks that are erosion-resistant enough to retain small craters as well as do lava flows. Breakdown of conglomerates, breccias, and even some mudstones, can produce a pebbly regolith that imparts a “smooth” appearance in satellite and aerial images. Context is important; sedimentary rocks remain challenging to distinguish from primary igneous rocks in some cases. Detection of ultramafic, mafic, or andesitic compositions do not dictate that a rock is igneous, and clast genesis should be considered separately from the depositional record. Mars likely has much more sedimentary rock than previously recognized. Full article

The Indus River is Asia’s longest river, having its origin in the Tibet Mountain northwest of Pakistan. Routed from northern Gilgit and flowing to the plains, the river passes through several provinces and is connected by numerous small and large tributaries. The river was formed tectonically due to the collusion of the Indian and Eurasian plates, which is referred to as the Indus suture Plains zone (ISPZ). The geological setting of the study area is mainly composed of igneous and metamorphic rocks. The river passed through a variety of climatic zones and areas, although the predominant climate is subtropic arid and sub arid to subequatorial. Locally and globally, anthropogenic activities such as building, dams, and water canals for irrigation purposes, mining exploration, and industries and factories all affected the physical and chemical behaviors of the sediments in various rivers. The main effect of human activities is the reworking of weathered soil smectite, a chemical weathering indicator that rises in the offshore record about 5000 years ago. This material indicates increased transport of stronger chemically weathered material, which may result from agriculture-induced erosion of older soil. However, we also see evidence for the incision of large rivers into the floodplain, which is also driving the reworking of this type of material, so the signal may be a combination of the two. Sediments undergo significant changes in form and size due to clashing with one another in the high-charge river. Full article

This paper revisits the intermediate sediment repository (ISR) concept applied to provenance, using a comparison of the detrital zircon population of Holocene beach sand from the southwest Portuguese coast with populations from their potential source rocks. The U–Pb age of detrital zircon grains in siliciclastic rocks allows for the interpretation of provenance by matching them with the crystallization ages of igneous source (protosource) rocks in which this mineral originally crystallized or which was subsequently recycled from it, acting as ISRs. The comparative analysis of the Precambrian, Paleozoic, and Cretaceous ages using recent statistical tools (e.g., kernel density estimator (KDE), cumulative age distribution (CAD), and multidimensional scaling (MDS)) suggests that the zircon age groups of Carboniferous, Triassic, and Pliocene-Pleistocene ISRs are reproduced faithfully in Holocene sand. Furthermore, the recycling of a protosource (Cretaceous syenite) in a sedimentary system dominated by ISRs is evaluated. It is argued that the ISR concept, which is not always taken into account, is required for a better understanding of the inherent complexity of local provenance and to differentiate sediment recycling from first- cycle erosion of an igneous rock. Full article

The petrographic composition and grain shape variability of beach gravels in the Pogorzelica–Dziwnów coast section (363.0 to 391.4 km of coastline), southern Baltic Sea, Poland were analyzed herein to characterize the lithodynamics and trends of seashore development. Gravels were sampled at 0.25 km intervals, in the midpart of the berm, following an early-autumn wave storm and before beach nourishment. Individual variations in petrographic groups along the shore were investigated. Gravel data were compared and related to coastal morpholithodynamics, seashore infrastructure, and geology of the study area. The contribution of crystalline rock gravels (igneous and metamorphic) was observed to increase along all coast sections, whereas the amount of less resistant components (limestones, sandstones, and shales) usually declined. This effect is explained by the greater wave crushing resistance of igneous and metamorphic components, compared with sedimentary components. Similarly, the gravel grain shape (mainly elongation or flattening) was observed to change, depending on resistance to mechanical destruction, or due to the increased chemical weathering in mainly the limestones, marbles, and sandstones. Observed increase in contribution of discoid and ellipsoid grains is a potential indicator of depositional trends along the coast sections investigated. On the other hand, increased contents of spheroidal and spindle-shaped grains may be related to erosional trends, where intensive redeposition and mechanical reworking of gravels occurs. However, due to the great number of coastal embankments, the petrographic composition and shape parameters of beach gravels do not always clearly indicate the dominant direction of longshore bedload transport. Increased amount of eroded limestone located east of Pogorzelica indicate increased erosion of glacial tills. These sediments are deposited, building the shallow foreshore, with additional redeposition of morainic material towards the shore. Full article

This project examines the role of high-latitude storms degrading a Holocene coast formed by igneous rocks composed of low-grade chromite ore and dunite that originated within the Earth’s crust near the upper mantle. Such rocks are dense and rarely exposed at the surface by tectonic events in the reconfiguration of old ocean basins. An unconsolidated boulder beach occupies Støypet valley on Leka Island in northern Norway, formerly an open channel 10,000 years ago when glacial ice was in retreat and rebound of the land surface was about to commence. Sea cliffs exposing a stratiform ore body dissected by fractures was subject to wave erosion that shed large cobbles and small boulders into the channel. Competing mathematical equations are applied to estimate the height of storm waves impacting the channel floor and cliffs, and the results are compared with observations on wave heights generated by recent storms striking the Norwegian coast with the intensity of an orkan (Norwegian for hurricane). Lateral size variations in beach clasts suggest that Holocene storms struck Leka Island from the southwest with wave heights between 5 and 7.5 m based on the largest beach boulders. This result compares favorably with recent high-latitude storm tracks in the Norwegian Sea and their recorded wave heights. The density of low-grade chromite ore (3.32 g/cm³) sampled from the beach deposit exceeds that of rocks like limestone or other igneous rocks such as rhyolite, andesite, and basalt taken into consideration regarding coastal boulder deposits associated with classic hurricanes in more tropical settings. Full article

This study reports the first example of major erosion from hurricanes degrading a rocky coastline anywhere around the Gulf of California, although other sources of evidence are well known regarding the effect of inland erosion due to catastrophic rainfall in the Southern Cape Region of the Baja California peninsula and farther north. The uplifted, 12-m terrace on the eastern shore of Isla del Carmen is the site of an unconsolidated coastal boulder deposit (CBD) consisting of large limestone blocks and boulders eroded from underlying Pliocene strata. The CBD stretches approximately 1.5 km in length, mostly set back 25 m from the lip of the terrace. The largest blocks of upturned limestone near the terrace edge are estimated to weigh between 5.8 and 28 metric tons. Waves impacting the rocky coast that peeled back slabs of horizontally-layered limestone at this spot are calculated to have been between 11.5 and 14 m in height. Analysis of sampled boulders from the CBD set back from the terrace edge by 25 m suggest that the average wave height responsible for moving those boulders was on the order of 4.3 m. Additional localities with exposed limestone shores, as well as other more common rock types of igneous origin have yet to be surveyed for this phenomenon elsewhere around the Gulf of California. Full article

W.G. Lindgren in 1933 first noted that a belt of alkaline-igneous rocks extends along the eastern edge of the Rocky Mountains and Basin and Range provinces from Alaska and British Columbia southward into New Mexico, Trans-Pecos Texas, and eastern Mexico and that these rocks contain relatively large quantities of important commodities such as, gold, fluorine, zirconium, rare earth elements (REE), tellurium, gallium, and other critical elements. In New Mexico, these deposits were called Great Plain Margin (GPM) deposits, because this north-south belt of alkaline-igneous rocks roughly coincides with crustal thickening along the margin between the Great Plains physiographic province with the Basin and Range (including the Rio Grande rift) and Rocky Mountains physiographic provinces, which extends into Trans-Pecos Texas and eastern Mexico. Since 1996, only minor exploration and development of these deposits in New Mexico, Texas, and eastern Mexico has occurred because of low commodity prices, permitting issues, and environmental concerns. However, as the current demand for gold and critical elements, such as REE and tellurium has increased, new exploration programs have encouraged additional research on the geology of these deposits. The lack of abundant quartz in these systems results in these deposits being less resistant to erosion, being covered, and not as well exposed as other types of quartz-rich deposits, therefore additional undiscovered alkaline-related gold and REE deposits are likely in these areas. Deposits of Th-REE-fluorite (±U, Nb) epithermal veins and breccias are found in the several GPM districts, but typically do not contain significant gold, although trace amounts of gold are found in most GPM districts. Gold-rich deposits in these districts tend to have moderate to low REE and anomalously high tungsten and sporadic amounts of tellurium. Carbonatites are only found in New Mexico and Mexico. The diversity of igneous rocks, including alkaline-igneous rocks, and associated mineral deposits along this boundary suggests that this region is characterized by highly fractionated and differentiated, multiple pulses of mantle-derived magmas evolving to lower crustal magmas related to the subduction of the Farallon plate. The differences in incompatible trace elements, including REE and beryllium, between the different granitic to rhyolite rocks are likely related to either differences in the crustal rocks that were assimilated during magmatic differentiation or by potential minor contamination from crustal sources and/or magma mixing. Deep-seated fracture systems or crustal lineaments apparently channeled the magmas and hydrothermal fluids. Once magmas and metal-rich fluids reached shallow levels, the distribution and style of these intrusions, as well as the resulting associated mineral deposits were controlled by local structures and associated igneous rock compositions. Full article