Search Results (201)

The southeastern Hainan Island boasts abundant hydrothermal resources, most of which are exposed as thermal springs. Analyzing the hydrochemical characteristics, hydrochemical evolutionary mechanisms, and material transition of these resources is significant for their exploitation and utilization. This study investigated the Nanping geothermal field in southeastern Hainan Island, using five groups of geothermal water samples collected in 2022, as well as seven groups of geothermal water samples, one group of shallow groundwater samples, and one group of surface water samples taken in 2023. Specifically, this study examined water–rock interactions in the geothermal field using the Gibbs model, ion ratios, chloro-alkaline indices (CAIs), and the sodium adsorption ratio (SAR). Moreover, the mineral transfer process in groundwater was analyzed using inverse hydrogeochemical simulation. The results indicate that in the study area the geothermal water temperatures range from 64 °C to 80 °C, pH values from 8.32 to 8.64, and TDS concentrations from 431 mg/L to 623 mg/L. The primary hydrochemical types of geothermal water in the study area include Cl-Na and Cl·HCO₃-Na, suggesting low-temperature, slightly alkaline geothermal water. The hydrochemical components of geothermal water in the study area are primarily affected by water–rock interactions. Besides the dissolution of silicate minerals and halite, cation exchange reactions contribute greatly to the formation of Na⁺ and K⁺ in geothermal water. Geothermal water receives recharge from the atmospheric precipitation of the Diaoluo Shan area in the northwest of the study area, with the recharge elevation ranging from 967 to 1115 m. The inverse hydrogeochemical simulation results reveal that during the water–rock interactions, silicate minerals, clay minerals, gypsum, and halite dissolve, while quartz and carbonate minerals precipitate. Additionally, these processes are accompanied by cation exchange reactions dominated by the replacement of Na⁺ in surrounding rocks by Ca²⁺ in geothermal water. This study can provide a geological basis for the exploitation, utilization, and management of the Nanping geothermal field. Full article

Previous investigations into lithology-driven weathering processes have largely emphasized large-scale spatial assessments, while studies targeting small watershed scales remain scarce. This study investigated two adjacent watersheds (Chengjia: CJ; Datan: DT) under comparable climatic conditions in Guangdong, China, using hydrochemistry and stable carbon isotopes. The CJ watershed exhibited low-TDS (20–66 mg/L) HCO₃-Na·Ca-type waters dominated by silicate weathering, whereas the DT watershed displayed high-TDS (70–278 mg/L) HCO₃-Ca-type waters, indicative of mixed carbonate–silicate weathering. Results of carbon isotope composition of dissolved inorganic carbon confirmed that H₂CO₃-driven weathering was the dominant mechanism in both watersheds. In the CJ watershed, 79.5% of dissolved cations in surface water originated from silicate weathering, yielding a CO₂ consumption rate (CCR) of 0.28 × 10⁶ mol/km²/yr, while carbonate weathering was negligible. Conversely, in the DT watershed, 86.4% of dissolved cations were derived from carbonate weathering, yielding a CCR of 1.94 × 10⁶ mol/km²/yr, whereas silicate weathering contributed only 10.3% of cations with a CCR of 0.23 × 10⁶ mol/km²/yr. The chemical weathering rate of carbonate can be up to 10 times that of silicate, resulting in a larger CCR. This study demonstrated the key impact of lithology on hydrochemical characteristics and CO₂ consumption at small watershed scales. Full article

A study was carried out with a representative data set of volcanic lakes from the Azores archipelago. A total of 672 samples were collected during four field surveys conducted over the year and along the depth. Following water sampling, temperature, pH, and EC were measured, the dissolved CO₂ and alkalinity were determined by titration, and aliquots were taken to perform analysis of major, minor and trace elements, as well as ¹⁸O/¹⁶O, ²H/¹H and ⁸⁷Sr/⁸⁶Sr isotopic ratios. Waters are of meteoric origin and from the Na-HCO₃ to Na-Cl types. The ⁸⁷Sr/⁸⁶Sr ranges between 0.709194 and 0.704294, and most of the lakes depict less radiogenic values than seawater, suggesting a potential contribution from rock dissolution. Along the reciprocal of the Sr vs. ⁸⁷Sr/⁸⁶Sr plot, most samples suggest a linear trend between rock values and rainwater. Samples display considerable variability in the ∑REE, ranging from 0.83 µg L⁻¹ to 13.54 µg L⁻¹, and when chondrite normalized, depict a negative slope, showing an enrichment in light REEs compared to heavy REEs. This pattern is consistent with the one from Azores rocks and bottom sediments from some lakes, and most lakes depict Eu anomalies, resulting from interaction between water and sediments or from incongruent mineral dissolution. Full article

Groundwater is the main source of water for both domestic and agricultural use in arid regions. This study assessed the hydrogeochemical characteristics and suitability of groundwater for drinking and irrigation in Kenya’s Ewaso Ng’iro–Lagh Dera Basin. A total of 129 borehole groundwater samples were collected and analyzed for pH, electrical conductivity (EC), total hardness, and major ions. The groundwater was found to be mostly neutral to slightly alkaline and ranged from marginal to brackish in salinity. The dominant water type is Na-HCO₃, with the ionic order Na⁺ > Ca²⁺ > Mg²⁺ > K⁺ and HCO₃⁻ > Cl⁻ > SO₄²⁻ > NO₃⁻. Mineral saturation indices indicate that the water is undersaturated with gypsum and anhydrite but is saturated with calcite, dolomite, and aragonite. Groundwater chemistry is primarily influenced by ion exchange, the mixing of fresh and paleo-saline water, and rock weathering processes. The water quality index (WQI) reveals that 80.5% of groundwater is suitable for drinking. The rest have high levels of sodium, EC, and bicarbonate. Thus, they are not suitable. The irrigation water quality index (IWQI) places most samples in the moderate-to-severe restriction category due to high salinity and sodicity. These findings highlight the importance of properly treating groundwater before use. Full article

Given the high proportion of global fossil energy consumption, the Ordovician karst water in the North China-type coalfield, as a green energy source that harnesses both water and heat, holds significant potential for mitigating environmental issues associated with fossil fuels. In this work, we collected geothermal water samples and conducted borehole temperature measurements at the Xinhu Coal Mine in the Huaibei Coalfield, analyzed the chemical composition of regional geothermal water, elucidated the characteristics of thermal storage, and explored the influence of regional structure on the karst geothermal system in the northern region. The results indicate that the geothermal water chemistry at the Xinhu Coal Mine is of the Na-K-Cl-SO₄ type, with its chemical composition primarily controlled by evaporation and concentration processes. The average temperature of the Ordovician limestone thermal reservoir is 48.2 °C, and the average water circulation depth is 1153 m, suggesting karst geothermal water undergoing deep circulation. The geothermal gradient at the Xinhu Coal Mine ranges from 22 to 33 °C/km, which falls within the normal range for ground-temperature gradients. A notable jump in the geothermal gradient at well G1 suggests a strong hydraulic connection between deep strata within the mine. The heat-accumulation model of the hydrothermal mine geothermal system is influenced by strata, lithology, and fault structures. The distribution of high ground-temperature gradients in the northern region is a result of the combined effects of heat conduction from deep strata and convection of geothermal water. The Ordovician limestone and extensional faults provide a geological foundation for the abundant water and efficient heat conduction of the thermal reservoirs. Full article

In the Yuheng mining area (Jurassic coalfield, northern Shaanxi, China), the Yan’an Formation groundwater is characterized by elevated salinity, posing challenges for mine water pollution control and regional water resource management. However, the spatial distribution patterns and formation mechanisms of this high-salinity groundwater remain poorly studied. This study integrates hydrogeochemical data from 18 coal mines, analyzing the spatial salinity variations, major ion compositions and isotopic signatures. Combined with the evolution characteristics of ancient sedimentary environments and the composition analysis of rock salt minerals in the coal rock interlayers, the formation mechanism of high salinity water was explored. The results indicate that the groundwater mineralization degree of the Yan’an Formation in the Jurassic strata encountered in the Yuheng mining area is the highest, showing a decreasing trend upwards. On the plane, the western and northern regions are generally higher than the eastern and southern regions. The highest mineralization level of groundwater can reach 36.25g/L, and the high mineralization hydrochemical type is mainly SO₄-Na·Ca type, with occasional Cl-Na type in areas with extremely high mineralization level. The cause analysis shows that the highly mineralized groundwater in the Yuheng mining area comes from atmospheric precipitation, which infiltrates and dissolves salt rocks. In addition, the mining area is located in the arid area of northern Shaanxi, with insufficient water supply and no obvious structural faults, and has good sealing properties, thus exhibiting the characteristics of high mineralization. These mechanisms provide a formation model for the high-salinity groundwater in Jurassic coal-bearing strata, offering critical implications for predictive hydrogeochemical modeling and sustainable water management in arid mining regions. Full article

This study elucidates soil–climate regulatory mechanisms on regional health baselines in China and hydrogeochemical roles in cardiovascular biomarker differentiation. Utilizing data from 26,759 healthy adult samples across 286 Chinese cities/counties, seven core factors were identified via Pearson correlation analysis from 25 indicators, including longitude (X₁, r = −0.192, p = 0.009), elevation (X₃, r = 0.377, p = 0.001), and precipitation (X₇, r = −0.200, p = 0.006). Ridge regression analysis (R² = 0.714) was subsequently applied to simulate predicted values for 2232 cities/counties. The synergistic effects of soil calcium sulfate content and salinity (X₂₅) on serum cardiac troponin I (cTnI) reference values were rigorously validated, explaining 25.5% of regional cTnI elevation (ΔR² = 0.183). The findings demonstrate that precipitation leaching and groundwater recharge processes collectively drive a 25.5% elevation in cTnI levels in northwestern regions (e.g., Nagqu, Tibet: altitude > 4500 m, annual sunshine > 3000 h) compared to southeastern areas. To mitigate salinity transport dynamics, optimization strategies targeting soil cation exchange capacity (X₁₈/X₁₉) were proposed, providing a theoretical foundation for designing gradient water treatment schemes in high-calcium-sulfate zones (CaSO₄ > 150 mg/L). Crucially, regression equations derived from the predictive model enable the construction of a geographically stratified reference framework for cTnI in Chinese adults, with spatial analysis delineating its latitudinal (R² = 0.83) and longitudinal (R² = 0.88) distribution patterns. We propose targeted strategies optimizing soil cation exchange capacity to mitigate sulfate transport in groundwater, informing geographically tailored water treatment and cardiovascular disease prevention efforts. Our findings provide localized empirical evidence critical for refining WHO drinking water sulfate guidelines, demonstrating direct integration of hydrogeochemistry, water quality management, and public health. Full article

This study aims to assess the vulnerability of groundwater in the Nile Delta to contamination and evaluate its suitability for drinking and irrigation. A total of 28 groundwater wells (ranging from 23 to 120 m in depth) and two Nile surface water samples were analyzed for total dissolved solids (TDS), heavy metals, groundwater quality index (GWQI), and hazard quotient (HQ). The findings reveal that deep groundwater (60–120 m) displays paleo-water characteristics, with low TDS, total hardness, and minimal heavy metal contamination. In contrast, shallow groundwater (<60 m) is categorized into three groups: paleo-water-like, recent Nile water with elevated TDS and heavy metals, and mixed water. Most groundwater samples (64%) are of the Ca-HCO₃ type, while 28% are Na-HCO₃, and 8% are Na-Cl, the latter associated with sewage infiltration. Most groundwater samples were deemed suitable for irrigation, but drinking water quality varied significantly—4% were classified as “excellent”, 64% as “good”, and 32% as “poor”. HQ analysis identified manganese as a significant health risk, with 56% of shallow groundwater samples exceeding safe levels. These findings highlight the varying groundwater quality in the Nile Delta, emphasizing concerns regarding health risks from heavy metals, particularly manganese, and the need for improved monitoring and management. Full article

Groundwater is one of the major sources of freshwater supply for drinking and domestic purposes. This study evaluates the hydrogeochemical processes, groundwater quality for human consumption, associated health risks from fluoride F⁻ and nitrate (NO₃⁻), and sources of dissolved solutes in a highland watershed in northern Pakistan. Groundwater samples (n = 51) were gathered and analyzed for a range of physicochemical parameters. To evaluate contamination, indices such as the nitrate pollution index (NPI) and fluoride pollution index (FPI) were applied, along with a composite groundwater pollution index to assess overall water quality. The findings revealed that total dissolved solid, turbidity, F⁻, and K⁺ levels exceeded health-based thresholds in 20%, 1%, 4%, and 2% of samples, respectively. Among the water sources, handpumps were identified as the most contaminated. According to the NPI and composite index, 96% and 92% of the samples did not show significant contamination, respectively. However, the FPI results highlighted that 59% of the samples exhibited low F⁻ pollution, while 41% fell under medium pollution levels. While NO₃⁻ ingestion posed no notable health risks, ${\mathrm{F}}^{-}$ exposure presented significant concerns, with 58.8% of the samples posing risks, particularly for children. The dominant hydrochemical facies were Ca-Mg-HCO₃, with the main influence on water chemistry by rock-water interactions and reverse ion exchange processes. Full article

In this study, we comparatively discuss chemical and isotopic characteristics of thermal waters from several geothermal fields within the eastern part of the Büyük Menderes graben, Western Türkiye. The studied thermal waters with a wide range of temperature (33 to 242 °C) and pH value (6.10 to 9.38) show water types varying from Ca-Mg-HCO₃-SO₄ to Na-HCO₃-SO₄. The chemical composition of waters is controlled by several processes, which include temperature, circulation depth, extent of water–rock interaction, dissolution/precipitation, mixing, cation exchange and microbial activity. All thermal waters are of meteoric origin and generally have deep circulation. δ¹³C data indicate that marine limestone and mantle-derived CO₂ are the major sources of carbon in thermal waters and δ³⁴S values imply that the sulfate is originated from the Neogene gypsums. At discharge temperatures, all thermal waters are saturated with various carbonate, silica and clay minerals, which is supported by the XRD analysis of scaling materials. The REY composition of the scaling samples showed that the limestone is the source rock for the rare earth elements. Thermal waters with a positive ¹⁸O shift of 2.7 to 4.6‰ have reservoir temperatures of 170–245 °C, whilst other waters with a shift of <1‰ have reservoir temperatures in the range of 79 to 166 °C. Regarding the distribution of temperature, electricity production seems to be more suitable in the western part of the region, although relatively low-temperature areas in the east also look promising. Full article

This study investigated the formation mechanism of the Kahui Geothermal Field in Western Sichuan, China, using geophysical and geochemical approaches to elucidate its geological structure and geothermal origins. This study employed a combination of 2D and 3D inversion techniques involved in natural electromagnetic methods (magnetotelluric, MT, and audio magnetotelluric, AMT) along with the analysis of hydrogeochemical samples to achieve a comprehensive understanding of the geothermal system. Geophysical inversion revealed a three-layer resistivity structure within the upper 2.5 km of the study area. A geological interpretation was conducted on the resistivity structure model, identifying two faults, the Litang Fault and the Kahui Fault. The analysis suggested that the shallow part of the Kahui Geothermal Field is controlled by the Kahui Fault. Hydrochemical analysis showed that the water chemistry of the Kahui Geothermal Field is of the HCO₃−Na type, primarily sourced from atmospheric precipitation. The deep heat source of the Kahui Geothermal Field was attributed to the partial melting of the middle crust, driven by the upwelling of mantle fluids. This process provides the necessary thermal energy for the geothermal system. Atmospheric precipitation infiltrates through tectonic fractures, undergoes deep circulation and heating, and interacts with the host rocks. The heated fluids then rise along faults and mix with shallow cold water, ultimately emerging as hot springs. Full article

Presently, geothermal resources have been globally recognized as an indispensable component of the energy system due to their sustainability. However, previous studies on geothermal reservoirs focus primarily on single reservoirs, lacking a systematic investigation of composite geothermal reservoirs. The geothermal reservoirs in the northwestern Shandong geothermal area in China are primarily of sandstone and karst types, characterized by extensive distributions, shallow burial depths, high water temperatures, and high water abundance, holding considerable potential for exploitation. This study explored the hydrochemical, isotopic, and circulation characteristics of geothermal fluids in the composite geothermal reservoirs in the study area using methods like hydrogeochemistry and geothermal geology. The purpose is to determine the geochemical differences in geothermal fluids across the composite geothermal reservoirs and provide scientific support for subsequently efficient and sustainable exploitation and utilization of geothermal resources in the study area. The composite geothermal reservoirs in the study area are composed of porous sandstone geothermal reservoirs (also referred to as sandstone reservoirs) in the upper part and karst-fissured geothermal reservoirs (also referred to as karst reservoirs) in the lower part. The results show that the geothermal fluids in the sandstone and karst reservoirs are primarily of Na-Cl-SO₄ and Na-Ca-Cl-SO₄ types, respectively. The hydrochemical composition of geothermal fluids in the karst reservoirs is principally influenced by the precipitation–dissolution equilibrium of carbonate and sulfate minerals, while that in the sandstone reservoirs is predominantly influenced by the precipitation–dissolution equilibrium of carbonate and silicate minerals, as well as cation exchange reactions. The temperatures of the karst reservoirs were calculated at 52.9–82.09 °C using geothermometers. Given the cold-water mixing ratios range from 89% to 96%, the corrected reservoir temperatures vary from 200 to 225 °C. In contrast, the temperatures of the sandstone reservoirs were calculated at 60.54–85.88 °C using geothermometers. These reservoirs exhibit cold water mixing ratios ranging from 85% to 90%, and their corrected reservoir temperatures vary from 150 to 200 °C accordingly. The circulation depths of geothermal fluids in the karst and sandstone reservoirs range from 1107.28 to 1836.69 m and from 1366.60 to 2102.29 m, respectively. The study area is primarily recharged by meteoric water from Mount Tai and the Lushan and Yishan mountains (collectively referred to as the Tai-Lu-Yi mountains) to the southeast of the study area. Investigating the differences in geochemical characteristics of geothermal fluids in composite geothermal reservoirs in the study area is significant for balancing the exploitation and supply of geothermal resources, optimizing the exploitation and utilization modes, and promoting the efficient and sustainable exploitation and utilization of geothermal resources in the study area. Full article

The Tibetan Plateau, a critical regulator of the global water cycle and climate system, represents a highly sensitive region to environmental changes, with significant implications for sustainable development. This study focuses on Nam Co Lake, the third largest lake on the Tibetan Plateau, and investigates the hydrochemical evolution of the lake and the driving mechanisms in regard to the lake–river–groundwater system within the Nam Co Basin over the last 20 years. Our findings provide critical insights for sustainable water resource management in regard to fragile alpine lake ecosystems. The hydrochemical analyses revealed distinct temporal patterns in the total dissolved solids, showing an increasing trend during the 2000s, followed by a decrease in the 2010s. Piper diagrams demonstrated a gradual change in the anion composition from the Cl type to the HCO₃ type over the study period. The ion ratio analyses identified rock weathering (particularly silicate, halite, sulfate, and carbonate weathering), ion exchange, and evaporation processes as primary controlling processes, with notable differences between water bodies: while all four weathering processes contributed to the lake’s water chemistry, only halite and carbonate weathering influenced river and groundwater compositions. The comparative analysis revealed more pronounced ion exchange processes in lake water than in river and groundwater systems. Climate change impacts were manifested through two primary mechanisms: (1) enhanced evaporation, leading to elevated ion concentrations and isotopic enrichment; and (2) temperature-related effects on the water chemistry through increased dilution from precipitation and glacial meltwater. Understanding these mechanisms is essential for developing adaptive strategies to maintain water security and ecosystem sustainability. The relationships established between climate drivers and hydrochemical responses provide a scientific basis for predicting future changes and informing sustainable management practices for inland lake systems across the Tibetan Plateau. Full article

Investigations carried out on 72 fluid samples from 59 sites spread over the area surrounding the Sea of Marmara show that their geochemical and isotopic features are related to different segment settings of the North Anatolian Fault Zone (NAFZ). We collected fluids from thermal and mineral waters including bubbling and dissolved gases. The outlet temperatures of the collected waters ranged from 14 to 97 °C with no temperature-related geochemical features. The free and dissolved gases are a mixture of shallow and mantle-derived components. The large variety of geochemical features comes from intense gas–water (GWI) and water–rock (WRI) interactions besides other processes occurring at relatively shallow depths. CO₂ contents ranging from 0 to 98.1% and helium isotopic ratios from 0.11 to 4.43 Ra indicate contributions, variable from site to site, of mantle-derived volatiles in full agreement with former studies on the NAFZ. We propose that the widespread presence of mantle-derived volatiles cannot be related only to the lithospheric character of the NAFZ branches and magma intrusions have to be considered. Changes in the vertical permeability induced by fault movements and stress accumulation during seismogenesis, however, modify the shallow/deep ratio of the released fluids accordingly, laying the foundations for future monitoring activities. Full article

Groundwater serves as a vital water source in Zhanjiang City. This study analyzed the chemical components of 35 samples to understand the hydrochemical characteristics and evolution mechanism of groundwater in Zhanjiang City. A comprehensive analysis was conducted using statistical methods, including the use of Piper trilinear diagrams, the Gibbs method, ion ratios, and other techniques, to investigate the sources and control factors of the main ions in groundwater in the area. The findings reveal that all the groundwater is freshwater, with the main cations and anions being Na⁺ and HCO₃⁻, respectively. Shallow water is mainly of the Cl•SO₄ mixed cation type, followed by the HCO₃•ClNa•Ca type. Middle and deep pore water is mainly of the HCO₃Na type, followed by the HCO₃Na•Mg type and HCO₃Na•Ca type. The hydrochemical classifications of pore and fissure water are Cl•HCO₃Mg•Na type and Cl•HCO₃Na type water. The primary hydrogeochemical process is water–rock interaction, particularly the dissolution of silicate minerals. Additionally, evaporation and concentration contribute significantly to the chemical composition of shallow water, and ion exchange is also an important hydrogeochemical process affecting middle and deep pore water. Shallow water commonly contains nitrates, with 37.5% of shallow water showing contamination with NO₃⁻. This study aims to provide insights into the development and utilization of local water resources. Full article