Search Results (29)

Conventional approaches for distributed generation (DG) planning often fall short in addressing operational demands and regional control requirements within distribution networks. To overcome these limitations, this paper introduces a cluster-oriented DG planning method. In terms of cluster partitioning, this study breaks through the limitations of traditional methods that solely focus on electrical parameters or single functions. Innovatively, it partitions the distribution network by comprehensively considering multiple critical factors such as system grid structure, nodal load characteristics, electrical coupling strength, and power balance, thereby establishing a unique multi-level grid structure of **distribution network—cluster—node**. This partitioning approach not only effectively reduces inter-cluster reactive power transmission and enhances regional power self-balancing capabilities but also lays a solid foundation for the precise planning of subsequent distributed energy resources. It represents a functional expansion that existing cluster partitioning methods have not fully achieved. In the construction of the planning model, a two-layer coordinated siting and sizing planning model for distributed photovoltaics (DPV) and energy storage systems (ESS) is proposed based on cluster partitioning. In contrast to traditional models, this model for the first time considers the interaction between power source planning and system operation across different time scales. The upper layer aims to minimize the annual comprehensive cost by optimizing the capacity and power allocation of DPV and ESS in each cluster. The lower layer focuses on minimizing system network losses to precisely determine the PV connection capacity of each node within the cluster and the grid connection locations of ESS, achieving comprehensive optimization from macro to micro levels. For the solution algorithm, a two-layer iterative hybrid particle swarm algorithm (HPSO) embedded with power flow calculation is designed. Compared to traditional single particle swarm algorithms, HPSO integrates power flow calculations, allowing for a more accurate consideration of the actual operating conditions of the power grid and avoiding the issue in traditional methods where the current and voltage distribution are often neglected in the optimization process. Additionally, HPSO, through its two-layer iterative approach, is able to better balance global and local search, effectively improving the solution efficiency and accuracy. This algorithm integrates the advantages of the particle swarm optimization algorithm and the binary particle swarm optimization algorithm, achieving iterative solutions through efficient information exchange between the two layers of particle swarms. Compared with conventional particle swarm algorithms and other related algorithms, it represents a qualitative leap in computational efficiency and accuracy, enabling faster and more accurate handling of complex planning problems. Case studies on a real 10 kV distribution network validate the practicality of the proposed framework and the robustness of the solution technique. Full article

As the proportion of renewable energy sources integrated into the power grid increases, it imposes significant volatility on the grid, leading to uneven load distribution across certain transmission lines. Rotating Power Flow Controllers (RPFCs) based on Rotating Phase-Shifting Transformers (RPSTs) offer a viable solution to such issues in lines rated at 10 kV and below. This paper begins with a brief introduction to RPFCs, followed by the modeling of their topology for a single-circuit line and the derivation of active and reactive power flow formulas. Notably, this paper introduces intelligent optimization algorithms to this field for the first time, employing an improved hybrid particle swarm optimization (HPSO) algorithm to control the active power while keeping the reactive power constant and subsequently adjusting the reactive power while maintaining the active power steady, thereby achieving power regulation. Using Matlab/Simulink simulations, this strategy was compared with adaptive adjustment strategies, verifying that it exhibits reduced power fluctuations and overshoots during the adjustment process, thus confirming the effectiveness of the adjustment scheme. By leveraging this algorithm in conjunction with simulations, a Q-P operating range diagram for transmission lines was plotted, determining the adjustable range of actual power. Full article

This study employs four metaheuristic optimization methods to optimize the dimensional synthesis of Ackermann steering mechanisms for three-axle, six-wheeled vehicles with front-axle steering mode and reverse-phase steering mode. The employed optimization methods include Particle Swarm Optimization (PSO), Hybrid Particle Swarm Optimization (HPSO), Differential Evolution with golden ratio (DE-gr), and Linearly Ensemble of Parameters and Mutation Strategies in Differential Evolution (L-EPSDE). With a front-wheel steering angle range of 70 degrees, two hundred optimization experiments were conducted for each method, and statistical analyses revealed that DE-gr and L-EPSDE methods outperformed PSO and HPSO methods in terms of standard deviation, mean value, and minimum error. These two methods exhibited superior convergence stability, faster convergence, and higher accuracy compared to PSO and HPSO. Reverse-phase (K = 1) steering mode outperformed front-axle steering mode, delivering reduced steering errors and turning radii. Considering the transmission ratio of front to rear axle (K) as a design variable in reverse-phase steering mode increased design flexibility and significantly lowered steering errors for the front and rear axle steering mechanisms. However, this comes with a slight increase in the turning radius of the vehicle’s front part compared to when K = 1. The optimized mechanism, designed using the DE-gr method, was validated through kinematic simulations and steering analyses using MSC-ADAMS v2015 software, further confirming the effectiveness and reliability of the proposed design. Full article

Advances in the early detection of breast cancer and treatment improvements have significantly increased survival rates. Traditional screening methods, including mammography, MRI, ultrasound, and biopsies, while effective, often come with high costs and risks. Recently, thermal imaging has gained attention due to its minimal risks compared to mammography, although it is not widely adopted as a primary detection tool since it depends on identifying skin temperature changes and lesions. The advent of machine learning (ML) and deep learning (DL) has enhanced the effectiveness of breast cancer detection and diagnosis using this technology. In this study, a novel interpretable computer aided diagnosis (CAD) system for breast cancer detection is proposed, leveraging Explainable Artificial Intelligence (XAI) throughout its various phases. To achieve these goals, we proposed a new multi-objective optimization approach named the Hybrid Particle Swarm Optimization algorithm (HPSO) and Hybrid Spider Monkey Optimization algorithm (HSMO). These algorithms simultaneously combined the continuous and binary representations of PSO and SMO to effectively manage trade-offs between accuracy, feature selection, and hyperparameter tuning. We evaluated several CAD models and investigated the impact of handcrafted methods such as Local Binary Patterns (LBP), Histogram of Oriented Gradients (HOG), Gabor Filters, and Edge Detection. We further shed light on the effect of feature selection and optimization on feature attribution and model decision-making processes using the SHapley Additive exPlanations (SHAP) framework, with a particular emphasis on cancer classification using the DMR-IR dataset. The results of our experiments demonstrate in all trials that the performance of the model is improved. With HSMO, our models achieved an accuracy of 98.27% and F1-score of 98.15% while selecting only 25.78% of the HOG features. This approach not only boosts the performance of CAD models but also ensures comprehensive interpretability. This method emerges as a promising and transparent tool for early breast cancer diagnosis. Full article

Straw mulch quantity is an important indicator in the detection of straw returned to the field in conservation tillage, but there is a lack of large-scale automated measurement methods. In this study, we estimated global straw mulch quantity and completed the detection of straw returned to the field. We used an unmanned aerial vehicle (UAV) carrying a multispectral camera to acquire remote sensing images of straw in the field. First, the spectral index was selected using the Elastic-net (ENET) algorithm. Then, we used the Genetic Algorithm Hybrid Particle Swarm Optimization (GA-HPSO) algorithm, which embeds crossover and mutation operators from the Genetic Algorithm (GA) into the improved Particle Swarm Optimization (PSO) algorithm to solve the problem of machine learning model prediction performance being greatly affected by parameters. Finally, we used the Monte Carlo method to achieve a global estimation of straw mulch quantity and complete the rapid detection of field plots. The results indicate that the inversion model optimized using the GA-HPSO algorithm performed the best, with the coefficient of determination (R²) reaching 0.75 and the root mean square error (RMSE) only being 0.044. At the same time, the Monte Carlo estimation method achieved an average accuracy of 88.69% for the estimation of global straw mulch quantity, which was effective and applicable in the detection of global mulch quantity. This study provides a scientific reference for the detection of straw mulch quantity in conservation tillage and also provides a reliable model inversion estimation method for the estimation of straw mulch quantity in other crops. Full article

Islanded DC microgrids are poised to become a crucial component in the advancement of smart energy systems. They achieve this by effectively and seamlessly integrating multiple renewable energy resources to meet specific load requirements through droop control, which ensures fair distribution of load current across the distributed energy resources (DERs). Employing droop control usually results in a DC bus voltage drop. This article introduces a secondary distributed control approach aimed at concurrently achieving current distribution among the DERs and regulating the voltage of the DC bus. The proposed secondary control approach eradicates voltage fluctuations and guarantees equitable current allocation by integrating voltage and current errors within the designed control loop. A novel hybrid particle swarm optimization–grey wolf optimization (HPSO-GWO) has been proposed, which assists in selecting the parameters of the distributed control technique, enabling the achievement of the proposed control objectives. Eigenvalue observation analysis has been utilized through the DC microgrid state-space model designed to assess the influence of the optimized distributed secondary control on the microgrid stability. A real-time testing system was constructed within MATLAB/Simulink^® and deployed on Speedgoat™ real-time equipment to validate the operations of the proposed technique for practical applications. The results indicated that the proposed secondary control effectively enhances voltage recovery and ensures proper current distribution following various disturbances, thereby maintaining a continuous power supply. The outcomes also demonstrated the capabilities of the control approach in accomplishing the control objectives within the DC microgrid, characterized by minimal oscillations, overshoots/undershoots, and rapid time responses. Full article

Accurate parameter estimation is essential for modeling the statistical characteristics of ocean clutter. Common parameter estimation methods in generalized Pareto distribution models have limitations, such as restricted parameter ranges, lack of closed-form expressions, and low estimation accuracy. In this study, the particle swarm optimization (PSO) algorithm is used to solve the non-closed-form parameter estimation equations of the generalized Pareto distribution. The goodness-of-fit experiments show that the PSO algorithm effectively solves the non-closed parameter estimation problem and enhances the robustness of fitting the generalized Pareto distribution to heavy-tailed oceanic clutter data. In addition, a new parameter estimation method for the generalized Pareto distribution is proposed in this study. By using the difference between the statistical histogram of the data and the probability density function/cumulative distribution function of the generalized Pareto distribution as the target, an adaptive function with weighted coefficients is constructed to estimate the distribution parameters. A hybrid PSO (HPSO) algorithm is used to search for the best position of the fitness function to achieve the best parameter estimation of the generalized Pareto distribution. Simulation analysis shows that the HPSO algorithm outperforms the PSO algorithm in solving the parameter optimization task of the generalized Pareto distribution. A comparison with other traditional parameter estimation methods for generalized Pareto distribution shows that the HPSOHPSO algorithm exhibits strong parameter estimation performance, is efficient and stable, and is not limited by the parameter range. Full article

This study presents hybrid particle swarm optimization with quasi-Newton (HPSO-QN), a hybrid optimization method for accurately identifying mechanical parameters in two-mass model (2MM) systems. These systems are commonly used to model and control high-performance electric drive systems with elastic joints, which are prevalent in modern industrial production. The proposed method combines the global exploration capabilities of particle swarm optimization (PSO) with the local exploitation abilities of the quasi-Newton (QN) method to precisely estimate the motor and load inertias, shaft stiffness, and friction coefficients of the 2MM system. By integrating these two optimization techniques, the HPSO-QN method exhibits superior accuracy and performance compared to standard PSO algorithms. Experimental validation using a 2MM system demonstrates the effectiveness of the proposed method in accurately identifying and improving the mechanical parameters of these complex systems. The HPSO-QN method offers significant implications for enhancing the modeling, performance, and stability of 2MM systems and can be extended to other systems with flexible shafts and couplings. This study contributes to the development of accurate and effective parameter identification methods for complex systems, emphasizing the crucial role of precise parameter estimation in achieving optimal control performance and stability. Full article

The quality of rolling bearings is vital for the working state and rotation accuracy of the shaft. Timely and accurately acquiring bearing status and early fault diagnosis can effectively prevent losses, making it highly practical. To improve the accuracy of bearing fault diagnosis, this paper proposes a CNN-LSTM bearing fault diagnosis model optimized by hybrid particle swarm optimization (HPSO). The HPSO algorithm has a strong global optimization ability and can effectively solve nonlinear and multivariate optimization problems. It is used to optimize and match the parameters of the CNN-LSTM model and dynamically find the optimal value of the parameters. This model overcomes the problem that the parameters of the CNN-LSTM model depend on empirical settings and cannot be adjusted dynamically. This model is used for bearing fault diagnosis, and the accuracy rate of fault diagnosis classification reaches 99.2%. Compared with the traditional CNN, LSTM, and CNN-LSTM models, the accuracy rates are increased by 6.6%, 9.2%, and 5%, respectively. At the same time, comparing the models with different optimization parameters shows that the model proposed in this paper has the highest accuracy. The experimental results verified the superiority of the HPSO algorithm to optimize model parameters and the feasibility and accuracy of the HPSO-CNN-LSTM model for bearing fault diagnosis. Full article

In order to address the issue of power loss resulting from partial shadow and enhance the efficiency of photovoltaic power generation, the photovoltaic array reconfiguration technology is being increasingly utilized in photovoltaic power generation systems. This paper proposes a reconfiguration method based on improved hybrid particle swarm optimization (HPSO) for the photovoltaic array of TCT (total-cross-tied) structure. The motivation behind this method is to get the best reconfiguration scheme in a simple and efficient manner. The ultimate goal is to enhance the output power of the array, save energy, and improve its overall efficiency. The improved HPSO introduces the concept of hybridization in genetic algorithms and adopts a nonlinear decreasing weight method to balance the local search and global search ability of the algorithm and prevent it from falling into the local optimal solution. The objective function used is the variation coefficient of the row current without the weight factor. This approach saves time and balances the row current of the array by altering the electrical connection of the component. In the 4 × 3 array, the improved HPSO is compared with the Zig-Zag method. In the 9 × 9 array, the improved HPSO is compared with the CS (competence square) method and the improved SuDoKu method. The simulation results show that the power enhancement percentage of the improved HPSO is between 6.39% and 28.26%, and the power curve tends to single peak characteristics. The improved HPSO has a smaller mismatch loss and a higher fill factor in the five shadow modes, which can effectively improve the output power, and it is convenient to track the maximum power point later. Full article

The reasonable scheduling of agricultural machinery can avoid their purposeless flow during the operational service and reduce the scheduling cost of agricultural machinery service centers. In this research, a multiregional agricultural machinery scheduling model with a time window was established considering the timeliness of agricultural machinery operation. This model was divided into two stages: In the first stage, regions were divided through the Voronoi diagram, and farmlands were distributed to intraregional service centers. In the second stage, the model was solved using the hybrid particle swarm optimization (HPSO). The algorithm improves the performance of the algorithm by introducing a crossover, mutation, and particle elimination mechanism, and by using a linear differential to reduce the inertia weight and trigonometric function learning factor. Next, the accuracy and effectiveness of the algorithm are verified by different experimental samples. The results show that the algorithm can effectively reduce the scheduling cost, and has the advantages of strong global optimization ability, high stability, and fast convergence speed. Subsequent algorithm comparison proves that HPSO has better performance in different situations, can effectively solve the scheduling problem, and provides a reasonable scheduling scheme for multiarea and multifarmland operations. Full article

The hybridization of PSO for the Optimal Coordination of Directional Overcurrent Protection Relays (DOPR) of the IEEE bus system proposes a new method for coordinating directional overcurrent protection relays in power systems. The method combines the hybrid particle swarm optimization (HPSO) algorithm and a heuristic PSO algorithm to find the minimum total operating time of the directional overcurrent protection relays with speed and accuracy. The proposed method is tested on the IEEE 4-bus, 6-bus, and 8-bus systems, and the results are compared with those obtained using traditional coordination methods. The collected findings suggest that the proposed method may produce better coordination and faster operation of DOPRs than the previous methods, with an increase of up to 74.9% above the traditional technique. The hybridization of the PSO algorithm and heuristic PSO algorithm offers a promising approach to optimize power system protection. Full article

Permutation flow-shop scheduling is the strategy that ensures the processing of jobs on each subsequent machine in the exact same order while optimizing an objective, which generally is the minimization of makespan. Because of its NP-Complete nature, a substantial portion of the literature has mainly focused on computational efficiency and the development of different AI-based hybrid techniques. Particle Swarm Optimization (PSO) has also been frequently used for this purpose in the recent past. Following the trend and to further explore the optimizing capabilities of PSO, first, a standard PSO was developed during this research, then the same PSO was hybridized with Variable Neighborhood Search (PSO-VNS) and later on with Simulated Annealing (PSO-VNS-SA) to handle Permutation Flow-Shop Scheduling Problems (PFSP). The effect of hybridization was validated through an internal comparison based on the results of 120 different instances devised by Taillard with variable problem sizes. Moreover, further comparison with other reported hybrid metaheuristics has proved that the hybrid PSO (HPSO) developed during this research performed exceedingly well. A smaller value of 0.48 of ARPD (Average Relative Performance Difference) for the algorithm is evidence of its robust nature and significantly improved performance in optimizing the makespan as compared to other algorithms. Full article

Extending the lifetime of wireless sensor networks (WSNs) and minimizing energy costs are the two most significant concerns for data transmission. Sensor nodes are powered by their own battery capacity, allowing them to perform critical tasks and interact with other nodes. The quantity of electricity saved from each sensor together in a WSN has been strongly linked to the network’s longevity. Clustering conserves the most power in wireless transmission, but the absence of a mechanism for selecting the most suitable cluster head (CH) node increases the complexity of data collection and the power usage of the sensor nodes. Additionally, the disparity in energy consumption can lead to the premature demise of nodes, reducing the network’s lifetime. Metaheuristics are used to solve non-deterministic polynomial (NP) lossy clustering problems. The primary purpose of this research is to enhance the energy efficiency and network endurance of WSNs. To address this issue, this work proposes a solution where hybrid particle swarm optimization (HPSO) is paired with improved low-energy adaptive clustering hierarchy (HPSO-ILEACH) for CH selection in cases of data aggregation in order to increase energy efficiency and maximize the network stability of the WSN. In this approach, HPSO determines the CH, the distance between the cluster’s member nodes, and the residual energy of the nodes. Then, ILEACH is used to minimize energy expenditure during the clustering process by adjusting the CH. Finally, the HPSO-ILEACH algorithm was successfully implemented for aggregating data and saving energy, and its performance was compared with three other algorithms: low energy-adaptive clustering hierarchy (LEACH), improved low energy adaptive clustering hierarchy (ILEACH), and enhanced PSO-LEACH (ESO-LEACH). The results of the simulation studies show that HPSO-ILEACH increased the network lifetime, with an average of 55% of nodes staying alive, while reducing energy consumption average by 28% compared to the other mentioned techniques. Full article

A method is proposed for recognizing and predicting non-linear systems employing a radial basis function neural network (RBFNN) and robust hybrid particle swarm optimization (HPSO) approach. A PSO is coupled with a spiral-shaped mechanism (HPSO-SSM) to optimize the PSO performance by mitigating its constraints, such as sluggish convergence and the local minimum dilemma. Three advancements are incorporated into the hypothesized HPSO-SSM algorithms to achieve remarkable results. First, the diversity of the search process is promoted to update the inertial weight $\omega$ based on the logistic map sequence. Then, two distinct parameters are trained in the original position update algorithm to enhance the work efficiency of the successive generation. Finally, the proposed approach employs a spiral-shaped mechanism as a local search operator inside the optimum solution space. Moreover, the HPSO-SSM method concurrently improves the RBFNN parameters and network size, building a model with a compact configuration and higher precision. Two non-linear benchmark functions and the total phosphorus (TP) modelling issue in a waste water treatment process (WWTP) are utilized to assess the overall efficacy of the creative technique. The results of testing indicate that the projected HPSO-SSM-RBFNN algorithm performed very effectively. Full article