Search Results (850)

The efficient photocatalytic generation of hydrogen peroxide (H₂O₂) from pure water remains a formidable challenge, primarily due to the rapid recombination of photogenerated electron–hole pairs and insufficient redox potentials inherent in single-component photocatalysts. To address these issues, we designed and synthesized a heterojunction material comprising cadmium sulfide nanoparticles loaded on carbon spheres (CS@CdS). Under conditions utilizing pure water and ambient air, the CS@CdS composite achieves an H₂O₂ production rate of 1305 μmol·g⁻¹·h⁻¹, which is 3.1 and 3.6 times higher than that of pure CdS and CS, respectively, without the need for any sacrificial agents or external oxygen supply. Systematic characterization reveals that CS and CdS form a tightly coupled electronic interface, which significantly accelerates charge carrier separation and effectively prolongs the lifetime of photogenerated carriers, thereby boosting photocatalytic performance. Furthermore, the CS component extends the visible-light absorption range of the composite and functions as an electron acceptor to suppress charge recombination, collectively endowing CS@CdS with enhanced photocatalytic activity. Mechanistic studies indicate that H₂O₂ production over CS@CdS proceeds predominantly via a two-step single-electron oxygen reduction reaction (ORR) pathway. This work offers a viable strategy for constructing CS-based heterojunction photocatalysts for efficient H₂O₂ synthesis. Full article

Graphitic carbon nitride (CN) is a promising photocatalytic material, but its practical application is limited by small specific surface area, narrow light absorption range, and high photogenerated carrier recombination rate. To address these issues, this study synthesized boron-doped carbon nitride (BCN) and sulfuric acid-exfoliated boron-doped carbon nitride (BCND). X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) results confirmed that boron was successfully doped into the CN skeleton via B-N bonds. Scanning electron microscopy (SEM) and N₂ adsorption–desorption (BET) characterizations showed that acid exfoliation significantly increased the specific surface area of BCND to 68.80 m²·g⁻¹, much higher than that of CN (9.54 m²·g⁻¹) and BCN (15.98 m²·g⁻¹). UV–visible diffuse reflectance spectroscopy (UV-Vis DRS) analysis revealed that BCND had the narrowest bandgap (2.59 eV) among the three materials, which enhanced its visible-light absorption efficiency. Photoelectrochemical tests demonstrated that BCND exhibited the smallest charge transfer resistance and the highest transient photocurrent density (eight times that of CN), indicating efficient separation of photogenerated electron–hole pairs. Photocatalytic water splitting experiments showed that BCND achieved the highest Hydrogen production rate of 792.34 μmol·g⁻¹·h⁻¹, which was about 4 times that of CN (158.41 μmol·g⁻¹·h⁻¹) and 1.36 times that of 2.5% BCN (584.30 μmol·g⁻¹·h⁻¹). Free-radical trapping experiments indicated that hydroxyl radicals (·OH) played a crucial promotional role in Hydrogen production, while superoxide anions (·O₂⁻) exerted an inhibitory effect. The enhanced performance of BCND was attributed to the synergistic effects of boron doping (narrowing bandgap) and acid exfoliation (increasing specific surface area). A possible photocatalytic Hydrogen production mechanism was proposed based on the experimental results. This study provides a feasible strategy for the structural modification and performance optimization of g-C₃N₄-based photocatalysts for water splitting. Full article

Graphitic carbon nitride (CN) is considered a promising metal-free photocatalyst due to its adjustable electronic band structure and straightforward synthesis. Nevertheless, the practical utility of pristine CN is hindered by its rapid carrier recombination rate and low electrical conductivity. In this study, we enhanced CN’s molecular structure through copolymerization with organic molecules, thereby optimizing its crystallinity, resulting in significant improvements. The optimized photocatalyst, termed CNBM, demonstrated a remarkable hydrogen evolution rate of 23.13 mmol·h⁻¹·g⁻¹, a 118-fold increase compared to CN, with an apparent quantum efficiency of 87.9% at 420 nm. This notable enhancement in photocatalytic performance can be attributed to the increased surface area, providing more active sites, and the incorporation of barbituric acid through copolymerization into the CN framework, facilitating electron delocalization. Furthermore, the enhanced crystallinity of CNBM promotes the effective separation of photogenerated electron–hole pairs. Full article

Nano-TiO₂ is widely used in many industrial fields due to its unique physical and chemical properties. In recent years, it has become a core material in the research of road engineering for degrading automobile exhaust. Under ultraviolet irradiation, it can excite electron-hole pairs and use its strong redox capacity to decompose automobile exhaust and improve air quality. From the perspectives of materials, performance and engineering application, this paper briefly describes the structure and physicochemical properties of nano-TiO₂, reviews the recent research progress of nano-TiO₂ in the photocatalytic degradation of automobile exhaust, systematically compares the effects of various strategies such as incorporation methods and modified materials on exhaust degradation efficiency, and conducts a quantitative analysis of performance differences. It is pointed out that insufficient road durability, poor compatibility with pavement materials and limited adaptability to unconventional environments are the main current problems and challenges in this research direction. The future development directions such as developing self-healing composite systems and constructing machine learning prediction models are also prospected. Full article

A Ce-doped photocatalytic composite with easy solid–liquid separation capability was prepared and a heterojunction was constructed between BiVO₄ and Fe₃O₄ via a co-precipitation method. A variety of characterization techniques were employed, such as X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), ultraviolet–visible spectroscopy (UV-vis), transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDS), as well as other related methods. Its photocatalytic performance for the degradation of Rhodamine B (RhB) was also studied. The results indicate that the photocatalytic efficiency of BiVO₄/Fe₃O₄ is 1.4 times that of the pure BiVO₄ matrix. In particular, the photocatalytic efficiency of Ce_1.5%-BiVO₄/Fe₃O₄ was 2.2 times higher than that of the pure BiVO₄ matrix, and a 100% degradation rate of RhB was achieved within 30 min. The introduction of Fe₃O₄ not only forms a heterojunction with BiVO₄, increasing the active sites and surface oxygen vacancies of the material and effectively suppressing the recombination of photogenerated electron (e^-)-hole (h⁺) pairs, but it also enables the rapid separation of the material from the wastewater solution by the magnetic properties of Fe₃O₄. Additionally, the partial substitution of Ce for Bi in the BiVO₄ lattice reduces the bandgap energy, which enhances the utilization efficiency of visible light and improves the photocatalytic performance of the composite material. The mechanism of RhB degradation by Ce_1.5%-BiVO₄/Fe₃O₄ composite materials is also analyzed in this study. Quenching experiments and EPR tests revealed that h⁺ and ${·\mathrm{O}}_2^{-}$ were the primary reactive species in the degradation process. Full article

Porous, crystalline gamma-Al₂O₃ coatings with a thickness of (6 ± 0.5) μm and a uniform distribution of rare earth (RE) dopants are synthesized by plasma electrolytic oxidation of aluminum at a current density of 150 mA/cm² in a boric acid and borax (BB) solution containing added RE oxide particles (Ho₂O₃, Tb₄O₇, and Pr₆O₁₁) at concentrations of 1, 2, and 4 g/L. The concentration of RE oxide particles in the BB solution determines the amount of RE elements incorporated into the coatings but does not significantly affect their surface morphology, crystal structure, or light absorption properties. The coatings exhibit high absorption in the middle/near-ultraviolet region, characteristic of Al₂O₃. Typical 4f-4f transitions of Ho³⁺, Tb³⁺, and Pr³⁺ are observed in the photoluminescence spectra. Photocatalytic evaluations using methyl orange degradation under simulated solar irradiation show that RE doping significantly enhances photocatalytic efficiency. Peak degradation efficiencies are achieved at a concentration of 4 g/L for all RE oxides. After 8 h of irradiation, maximum degradation reaches 88%, 92%, and 85% with pseudo-first-order rate constants (k_app) of about 0.274 h⁻¹, 0.339 h⁻¹, and 0.232 h⁻¹ for coatings synthesized in BB with 4 g/L Ho₂O₃, Tb₄O₇, or Pr₆O₁₁, respectively. In comparison, the pristine Al₂O₃ coating achieves only about 50% degradation (k_app ≈ 0.087 h⁻¹). Photoluminescence indicates that RE³⁺ ions serve as effective charge-carrier traps, suppressing electron–hole pair recombination. RE-doped Al₂O₃ coatings demonstrate exceptional structural stability and reusability over six cycles, highlighting their potential for sustainable wastewater remediation. Full article

Imidazolinone herbicides such as imazethapyr (IMT) pose potential ecological risks due to their high mobility and ecotoxicity. This study synthesized the bismuth-based photocatalyst BiOIO₃ via a facile hydrothermal method and systematically characterized its physicochemical properties. BiOIO₃ features a 2D lamellar structure, pure phase composition, and a built-in internal polarization electric field that efficiently separates photogenerated electron–hole pairs. Photocatalytic experiments exhibited that BiOIO₃ achieved 84.5% elimination of IMT, with a rate constant 66 times higher than that of TiO₂ (Rutile). Mechanistic studies revealed that photogenerated electrons (e⁻), holes (h⁺), and superoxide radicals (·O₂⁻) are the primary reactive species. HPLC-MS/MS identified key intermediates, and QSAR-based toxicity prediction showed reduced mutagenicity for most intermediates. Importantly, BiOIO₃ effectively eliminated five imidazolinone herbicides simultaneously. This work highlights BiOIO₃ as a promising photocatalyst for efficient and practical remediation of imidazolinone herbicide-contaminated water. Full article

The automated production of large-scale labeled datasets from concrete X-ray computed tomography (CT) images is a fundamental prerequisite for training and validating deep learning-based segmentation models. However, existing methods either require extensive manual annotation or rely on domain-specific deep learning models that themselves demand labeled data—a circular dependency. This paper presents a parameter-driven three-class segmentation framework that automatically classifies each pixel in a concrete CT slice into one of three material phases: void (air pores and cracks), coarse aggregate, and mortar matrix, generating annotation masks suitable for large-scale dataset production without manual labeling. The proposed method combines: (1) fixed-threshold void detection calibrated to concrete CT grayscale characteristics; (2) adaptive percentile-based initial segmentation responsive to image-specific statistics; (3) multi-criteria connected component scoring based on area, shape descriptors (circularity, solidity, compactness, extent, aspect ratio), intensity distribution, and boundary gradient; (4) material science-informed size constraints aligned with concrete phase volume fractions; and (5) a material continuity enforcement module that applies topological hole-filling and conditional convex-hull consolidation to eliminate internal contamination within accepted aggregate regions, reducing boundary roughness by 7.6% and recovering misclassified boundary pixels. All parameters are centralized in a configuration file, enabling reproducible batch processing of 224 × 224 pixel CT slices at 0.07–1.12 s per image. Evaluated on 1007 224 × 224 concrete CT patches cropped from 200 representative scan frames, the framework produces three-class segmentation masks with physically consistent void fractions (mean 3.2%), aggregate fractions (mean 32.4%), and mortar fractions (mean 64.4%), all within ranges reported in the concrete CT literature (used as a dataset-scale QC screen, not a validation metric). Primary outputs and the archived image–mask pairs for this work are provided as an 8-bit patch archive. For pixel-wise validation, we report IoU, Dice, and pixel accuracy on an independently labeled subset that can be unambiguously paired with the released predictions: averaged over 57 matched patches, mean pixel accuracy is 88.6%, macro-mean IoU is 74.7%, and macro-mean Dice is 84.9%. The framework provides a fully automated annotation pipeline for dataset production, eliminating manual labeling costs for concrete CT image collections. The generated datasets are suitable for training semantic segmentation networks such as U-Net and its variants. Full article

Zinc oxide (ZnO) is a semiconductor with photocatalytic activity, although it presents limitations due to its band gap and the rapid recombination of the electron–hole pair; therefore, strategies such as doping have been explored. In this work, ZnO nanoparticles doped with 3% and 5% silver (Ag) were synthesized using a Cylindropuntia cholla root extract as a reducing and stabilizing agent. The structural, chemical, and optical properties of the synthesized nanoparticles were investigated using Fourier Transform Infrared Spectroscopy (FT-IR), X-ray Diffraction (XRD), Cathodoluminescence (CL), X-ray Photoelectron Spectroscopy (XPS), and Energy-Dispersive X-ray Spectroscopy (EDS). FT-IR shows that the nanoparticles have peaks between 400 cm⁻¹ and 406 cm⁻¹, attributed to the Zn–O bond. XRD characterization confirmed the formation of the wurtzite crystalline phase of ZnO, as well as the cubic phase of Ag. CL reveals two peaks: one attributed to the ultraviolet (UV) region and another in the visible region, which is associated with defects in the lattice. XPS and EDS confirm the presence of Zn, O, and Ag in the samples. The degradation of methylene blue was 90.9%, 96.4%, and 97.0% for ZnO, 3AgZnO, and 5AgZnO, respectively, demonstrating an improvement in dye degradation efficiency when doping ZnO nanoparticles with Ag. Full article

TiO₂ is normally a preferred photocatalyst; however, its photocatalytic performance is constrained by its low surface area, wide band gap, and high electron–hole pair recombination rates. The objective of this study was to optimize the photocatalytic efficiency of TiO₂ by impregnating it onto activated carbon derived from Senegalia mellifera biomass. The quantitative study involved synthesizing TiO₂ using the precipitation technique and preparing AC through both chemical and physical activation methods. The prepared AC samples were impregnated with TiO₂ NPs using the wet impregnation method. The physicochemical properties of the samples were examined using several characterization techniques, namely, FTIR, EDS, Raman, UV reflectance, STA, SEM, and BET. The photocatalytic efficiency of AC/TiO₂ composites was evaluated through methyl orange degradation. The results showed significant improvement in photocatalytic performance when TiO₂ was supported on AC. The modified photocatalyst exhibited enhanced surface area, thus increased active sites for photocatalysis, improving electron–hole separation and reducing recombination. The 50%CO₂/AC-0.5TiO₂ composite demonstrated superior photocatalytic activity under both UV and visible light irradiation. It showed 52.1% MO removal under visible light and 76.1% MO removal under UV light. The study concludes that biomass-derived AC/TiO₂ composites present a promising, cost-effective and sustainable approach of enhancing photocatalytic activities. Full article

Bismuth oxychloride (BiOCl) has garnered significant research interest owing to its non-toxicity, affordability, and distinct layered structure. Although BiOCl possesses promising photocatalytic potential, its large band gap and rapid photocarrier recombination restrict its practical use. In this work, a natural tourmaline mineral was effectively integrated with BiOCl to form a composite (TBO). Comprehensive characterization and photocatalytic assessments revealed that the intrinsic electric field of tourmaline notably strengthened both the adsorption capacity and the light-driven catalytic efficiency of BiOCl. Under visible-light irradiation, ofloxacin (OFX, 10 ppm) was eliminated by approximately 98% within 60 min. The apparent reaction rate constant (k) of TBO was 0.0407 min⁻¹, which was approximately 184.8 and 2.26 times those of tourmaline alone and pristine BiOCl, respectively. Furthermore, both the visible-light absorption and the separation efficiency of photogenerated electron–hole pairs were significantly enhanced. After evaluating its behavior under various simulated natural environmental conditions, TBO displayed strong potential for practical application. Reactive species trapping and analysis identified singlet oxygen (¹O₂) and superoxide radicals (·O₂⁻) as the primary active species in photocatalysis. Moreover, the degradation route of ofloxacin and the toxicity of its intermediates were systematically examined. These findings offer meaningful guidance for improving photocatalytic materials by utilizing naturally occurring minerals. Full article

The current work aims to enhance the structural, optical, photocatalytic, and cytotoxic properties of CuO NPs at varied rGO concentrations of 5% and 10%. In the present work, a one-step hydrothermal method was successfully applied to prepare rGO/CuO NCs at different concentrations of RGO. The novelty of this work was to enhance the structural, optical, photocatalytic, and cytotoxic properties of CuO using the addition of rGO sheets. XRD, TEM, SEM-EDX, XPS, FTIR, UV-vis, PL, and DLS techniques were used to characterize the prepared samples. XRD data confirmed the formation of the monoclinic phase of CuO with a decrease in crystallite size, from 21.14 nm for CuO to 16.94 nm for the 10% rGO/CuO NCs nanocomposite. SEM and TEM images verified the uniform anchoring and excellent dispersion of CuO nanoparticles on the rGO sheets, and the EDX spectra showed the presence of Cu, O, and C elements in the obtained rGO/CuO NCs. DLS measurements showed that the hydrodynamic radius dropped from 69.98 ± 17.81 nm for CuO to 51.72 ± 10.48 nm for 10% rGO/CuO NCs. The zeta potential values remained negative for all samples, ranging from −20.50 ± 8.69 mV for CuO to −25.60 ± 9.08 mV for 10% rGO/CuO NCs, suggesting enhanced colloidal stability with rGO incorporation. Furthermore, FTIR and XPS analyses confirmed that Cu–O–C bonding formed between CuO and rGO. UV-Vis analysis revealed a redshift in the absorption edges as rGO content increased, reducing the band gap from 3.65 eV to 3.60 eV. Additionally, PL spectra showed a marked reduction in emission intensity due to a decrease in the recombination rate between electron (e⁻)–holes (h⁺) pairs. The CuO/(10%)rGO NCs showed the best photocatalytic performance with a 93.56% degradation of methylene blue (MB) after 120 min under UV irradiation, and followed pseudo-first-order kinetics with k = 0.0203 min⁻¹. Cytotoxicity studies on HT1080 cells showed a dose-dependent decrease in viability. 10% rGO/CuO NCs exhibited the highest cytotoxicity effect, resulting in 58% and 50% viability at 1.4 mg/mL, respectively. The presented results showed that the presence of rGO in CuO NPs played a role in enhancing the structural stability, charge mobility, and biological reactivity of Cu NPs. This study highlighted that the rGO/CuO NCs are a promising multi-functional material for environmental and biomedical applications. Full article

Photo-Fenton technology is considered an effective method for removing organic pollutants from water. In this work, a novel Mn-doped FeWO₄ (Mn-FeWO₄) photocatalyst was synthesized via a one-step hydrothermal method and applied for the photo-Fenton degradation of tetracycline (TC). The optimal Mn-FeWO₄-0.05 achieved 100% removal of TC within 60 min under visible light irradiation with a degradation rate constant of 0.0793 min⁻¹, which is 4.5 times higher than that of pristine FeWO₄. Systematic characterization revealed that Mn²⁺ ions were successfully incorporated into the FeWO₄ lattice, inducing lattice expansion and narrowing the bandgap from 2.37 eV to 2.25 eV, while also adjusting the conduction and valence band positions. This modulation significantly enhanced visible light absorption and promoted the separation and migration of photogenerated electron–hole pairs. In addition, the Mn²⁺/Mn³⁺ and Fe²⁺/Fe³⁺ dual redox cycles ensure the continuous generation of reactive oxygen species. Radical trapping experiments and electron paramagnetic resonance (EPR) spectroscopy demonstrated that superoxide radicals (•O₂⁻) and photogenerated holes (h⁺) were the dominant reactive species, while singlet oxygen (¹O₂) and hydroxyl radicals (•OH) played auxiliary roles. Moreover, Mn-FeWO₄-0.05 exhibited excellent stability, strong anti-interference ability against common anions, and high degradation efficiency toward various pollutants. Full article

To overcome the inherent limitations of graphitic carbon nitride (g-C₃N₄), specifically the rapid recombination of photogenerated electron–hole pairs and its confined light absorption range, a sulfur-doped g-C₃N₄ (S-g-C₃N₄) photocatalyst was developed in this work. The photocatalytic performance and its catalytic mechanism for rhodamine B (RhB) degradation were systematically investigated. Material characterization and performance tests revealed that S doping can narrow the band gap of g-C₃N₄ and effectively enhance the separation and transport efficiency of charge carriers. The as-prepared catalyst demonstrated excellent activity under simulated sunlight, achieving nearly complete degradation of 10 mg/L RhB within 15 min. Moreover, it exhibited robust stability across a pH range of 6 to 11 and in the presence of coexisting anions (Cl⁻, NO₃⁻, CO₃²⁻), with negligible activity loss after five consecutive cycles. Radical trapping experiments verified that ∙OH radicals served as the primary active species, with h⁺ playing a secondary role in the degradation process. This work provides practical guidance for designing durable g-C₃N₄-based photocatalysts with high performance for organic wastewater treatment. Full article

Queen bees form the core of honeybee colonies for reproduction, and their quality is the most critical factor affecting their reproductive and productive performance. In apicultural production, queen rearing requires beekeepers to perform manual larval grafting. This is strongly limited by the beekeepers’ eyesight and technical proficiency and has become a bottleneck restricting the development of modern apiculture. To overcome this long-standing technical challenge, we designed beeswax-based tools for queen rearing without grafting larvae for Apis mellifera. The tools consist of three core components: a single-sided hollow beeswax comb foundation, beeswax larval holders and beeswax queen cells with a hole at the bottom. The holders are paired with the hollows of the beeswax comb foundation and the hole of the beeswax queen cells. Following the construction of the comb by honeybees on the hollow foundation, the queen was confined to lay eggs on the single-sided comb. Subsequently, larval holders containing eggs or larvae were pulled out, assembled with beeswax queen cells, embedded in the buckles of queen-rearing frames, and placed into colonies for queen rearing. In order to verify the feasibility of the tools, a paired comparative experiment was conducted using Apis mellifera, with the tools as the treatment group and manual larval grafting as the control group. We evaluated multiple key indicators, including acceptance rate of queen cells, queen cell length at emergence, emergence rate, weight of newly emerged queen, morphological indices (thorax length/width, forewing width, hindwing length, head width), ovariole number and the relative mRNA expression of four queen development-related genes (Vg, Hex110, Hex70b, Jhamt). No significant differences were observed in queen cell acceptance rate and emergence rate between the two groups. However, compared with the control group, queens reared using the tools exhibited significantly greater queen cell length at emergence, higher emergence weight, superior morphological traits, more ovarioles and significantly upregulated expression of all four assayed genes. In conclusion, the tools can be used to rear high-quality Apis mellifera queens effectively with superior phenotypic and molecular traits compared to conventional grafting, which provides efficient and convenient queen-rearing tools for beekeepers. Full article