Search Results (2,214)

Water towers are historically significant hydraulic infrastructures that evolved from simple masonry structures to technologically advanced and architecturally expressive forms. This study presents a typological and material analysis of water towers, focusing on their construction techniques, durability, and potential for adaptive reuse. The research combines visual inspection, archival and bibliographic research, and photographic documentation, of selected European and Italian examples for comparative insights on design and materials choices. Data were collected and organized according to parameters such as construction materials, structural type, tank and roof form, access system, and current function. Assessments were conducted following the UNI EN 16096, providing a structured framework to evaluate heritage value, material conditions, and adaptive reuse potential. Main results demonstrate that water towers, beyond their original hydraulic function, retain significant technical, architectural, and cultural value, offering opportunities for adaptive reuse as cultural, educational, residential, or community spaces. Key findings identify material vulnerabilities, structural challenges (including wind, seismic, and thermo-hygrometric effects), and possibilities for sustainable interventions that respect historical authenticity. The study highlights how systematic typological assessment and documentation can guide evidence-based conservation and support innovative reuse strategies, integrating heritage preservation with urban regeneration and community engagement. Water towers exemplify the intersection of engineering, architecture, and cultural heritage, and their conservation requires a multidisciplinary approach between technical performance, material preservation, and socio-cultural significance. Finally, the implemented procedure is proposed as a methodological framework replicable and scalable for assessing similar infrastructures in other contexts. Full article

Sustainable building research increasingly incorporates AI technologies to enhance efficiency and decision-making, yet little is known about how algorithmic mediation shapes the cultural identity processes essential for heritage sustainability. This study proposes and validates a Content-Driven Dual-Track (CDDT) Model examining the relationships among AI content quality (AIQ), technology acceptance, and Architectural Cultural Identity (ACI). Based on a survey of 631 architecture and design students, structural equation modeling identified three patterns. First, AIQ strongly predicts perceived usefulness, perceived ease of use (PEOU), and perceived enjoyment, supporting a content-driven formation of system evaluations. Second, an “ease-of-use paradox” is observed: PEOU negatively relates to ACI (β = −0.18, p = 0.005), suggesting that frictionless browsing may hinder the cognitive effort required for deeper heritage value internalization. Third, ACI independently predicts continuous engagement intention (β = 0.110, p < 0.05) and correlates strongly with perceived content quality (r = 0.719, p < 0.001). Together, these findings suggest that while operational convenience serves as an essential entry point, sustainable digital heritage engagement requires moving beyond interface usability to prioritize the cultural depth of content assets, a principle applicable to BIM-driven cultural heritage systems and AI-based educational platforms. Full article

The global textile industry, challenged by resource depletion and environmental pollution, urgently requires a shift toward a circular economy. However, recycling efforts remain limited, focusing mainly on conventional fibers and neglecting high-performance materials like aramid. This study addresses the recycling of used firefighting protective clothing-an aramid-rich, high-turnover waste stream typically landfilled or incinerated. Life cycle assessment reveals the significant carbon footprint of its production and disposal, underscoring the need for circular strategies. A systematic recycling framework is established, integrating collection logistics and redesign principles. A graded “three-tier” approach is proposed, enabling direct reuse, yarn regeneration, and non-woven production based on material conditions. High-value products were developed by incorporating firefighting heritage and intangible cultural crafts into the design, supported by digital product passports for traceability. These strategies enhanced market acceptance and emotional value. The work provides a scalable circular solution for high-performance textiles, aiming to extend material life, reduce carbon emissions, and advance sustainable textile management through a novel combination of technical recycling and cultural value addition. Full article

Cultural heritage plays a pivotal role in shaping identity, fostering social cohesion, and advancing sustainable development. However, a vast number of non-designated historic buildings face ongoing risks of degradation or disappearance due to their unacknowledged value. Addressing this issue, this study investigates pathways for their sustainable reuse. Employing a multi-criteria decision-making framework, we developed a post-occupancy evaluation model comprising four dimensions: historical value preservation, adaptive reuse efficacy, regional development impact, and management service quality. The model was empirically applied to three cases of Meizhou Hakka architecture, in which such buildings were repurposed as guesthouses. The findings reveal that, unlike officially protected heritage buildings, the successful reuse of non-designated historic buildings depends not primarily on the strict preservation of historical value, but rather on superior adaptive reuse efficacy—namely, contemporary performance metrics such as functional adaptation rationality, spatial utilization efficiency, environmental comfort, and structural safety and reliability. Quantitative weighting results indicate that historical value preservation functions as a fundamental baseline, while empirical analysis demonstrates that adaptive reuse efficacy is the decisive determinant of successful regeneration. Achieving sustainability requires establishing a dynamic conservation model based on community symbiosis, wherein a building’s vitality is continually sustained through interaction with its social and cultural context. This study provides both a scientific tool and practical guidance for the assessment and management of non-designated historic buildings. It also underscores the necessity of a broader paradigm shift, contributing both theoretical and practical insights to the advancement of more inclusive and sustainable human settlements. Full article

Founded in 1703, St. Petersburg was the capital of the Russian Empire. Its historic center and associated monuments are inscribed as a UNESCO World Heritage Site. Its components are classified as cultural rather than natural or mixed. We hypothesized that a part of them has an additional ecotourism value. We carried out field observations along with a review of the literature. Our results confirmed the hypothesis: many of these sites retain important elements of biodiversity that can be used for environmental education. Large congregations of birds can be observed in close proximity to Heritage monuments. Wintering bats occupy the interiors of historic fortifications, and in summer, concentrations of feeding bats can be found nearby. Seal haul-out sites have been documented on small islands near the city. The ecotourism and nature-conservation value of these Heritage landscapes is usually linked to the original logic of their selection. The best locations were chosen for palace construction—dry, scenic areas with fertile soils suitable for park creation. Proximity to bodies of water was equally important, both for aesthetic reasons and for sanitation. These same qualities also make such areas highly favorable for biodiversity. Even after centuries of development, many natural features have persisted. Full article

Disaster Risk Management (DRM) for cultural heritage is increasingly recognized as a global priority, yet methodological harmonization and conceptual inconsistencies continue to hinder its effective implementation. This study develops and tests an integrated framework for Disaster Risk Assessment (DRA) applied to the Arian Baptistery of Ravenna—part of the UNESCO World Heritage property Early Christian Monuments of Ravenna since 1996. By combining elements from the ICCROM ABC Method, the IPCC/UNDRR conceptual models, and the QuiskScan model associated with the Nara Grid for value assessment, the research identifies the essential data, definitions, and conditions required to prepare a coherent risk knowledge base. The workflow includes five main steps: context analysis, stakeholder mapping, value assessment, terminological alignment, and risk components systematization. Results demonstrate that effective DRA depends not only on technical assessment of hazards but also on the integration of social, institutional, and governance factors that shape vulnerability. The study also proposes a hybrid hazard framework combining ICCROM’s Ten Agents of Deterioration with the UNDRR 2025 List of Hazards, expanding the concept of “dissociation” to include governance failures and socio-political risks. The Arian Baptistery thus serves as both a case study and a methodological laboratory, offering a replicable model for organizing knowledge, harmonizing terminology, and bridging disciplinary divides in cultural heritage risk management. Full article

The integration of intangible cultural heritage (ICH) and tourism development (TD) is regarded as a crucial national strategy for China’s sustainable development, as their synergistic relationship is considered pivotal for regional progress. A coupling coordination evaluation system was constructed. Kernel density estimation, entropy method, coupling coordination degree (CCD) and relative development degree (RDD) models, and a tobit model were employed to examine the spatiotemporal characteristics and influencing factors of ICH–TD integration in Sichuan Province. Key findings are as follows: (1) Sichuan is endowed with abundant ICH resources characterized by high heritage value and diverse typologies. However, the distribution is skewed toward traditional skills, exhibiting notable regional disparities. ICH demonstrates a “single-core, belt-shaped and multi-cluster” pattern, which is centered on Chengdu, extends along a north–south high-density belt, and forms several secondary high-density clusters. (2) Temporally, the CCD demonstrates a sustained upward trend, whereas the RDD transitions from ICH-lagged to TD-lagged. Spatially, the number of high coordinated cities increases annually, expanding radially from regional centers, while central-eastern regions consistently outperform the west. (3) Regarding influencing factors, comprehensive economic strength, distribution of industrial structure, overall level of urbanization, and transportation accessibility exert significant positive effects on the CCD, with comprehensive economic strength demonstrating the strongest influence. This study contributes to the theoretical understanding of ICH–TD synergy and provides policy-relevant guidance for integration. Full article

This paper investigates the application of Transit-Oriented Development (TOD) principles to the retrofitting of historic Gulf urban cores through a comparative analysis of Souq Waqif (Doha) and Qasr Al Hokm (Riyadh). The research employs field observation, thematic mapping, and qualitative diagnosis using the Integrated Modification Methodology (IMM) to assess compactness, intricacy, and connectivity within walkable station catchments. The findings indicate that Souq Waqif has a highly compact and intricate historic core with robust pedestrian activity, yet exhibits discontinuities at its periphery, such as car-dominated streets, fragmented green spaces, and weak connections between the metro station, parks, and adjacent blocks. In Qasr Al Hokm, the analysis affirms the value of its fine-grained historic fabric and civic landmarks, but also identifies deficiencies in shading, last-mile connectivity, and land-use balance surrounding the new metro station. Drawing on lessons from Souq Waqif, the paper proposes a TOD-oriented urban design framework for Qasr Al Hokm, emphasizing shaded pedestrian corridors, active ground floors, intermodal hubs, and heritage-compatible mixed-use intensification. This comparative approach demonstrates how TOD can foster more livable, accessible, and climate-responsive historic cores in Gulf cities, while maintaining respect for local identity and governance structures. Full article

The travertine formed through the precipitation of supersaturated calcium carbonate from geothermal or surface waters due to CO₂ degassing, evaporation, and biological activities not only exhibits remarkable landscape value but also holds significant scientific importance in geological research. Current conservation efforts face critical challenges including travertine degradation, increased algal biomass accumulation, and progressive marshification processes. The study focused on how Vallisneria natans (V. natans) and Ceratophyllum demersum (C. demersum) affected travertine deposition. Analyzing the physical and chemical parameters, phase structure, crystal morphology, and microbial community in the aquatic environment, it was observed that under conditions of low c (Ca²⁺) concentration in solution (≤100 mg L⁻¹), both species significantly increased the rate of travertine deposition. The effect of plant biomass was species-specific: V. natans showed the highest promotion at 70 g L⁻¹, while C. demersum performed effectively at moderate biomass levels (140 and 280 g L⁻¹). Specifically, C. demersum exhibited enhanced photosynthetic activity, elevated pH, increased dissolved oxygen (DO) content and more epibiotic microorganisms, with higher levels of Aeromonas compared to V. natans. Therefore, C. demersum demonstrated a greater capacity for travertine deposition. However, the culture environment with elevated c (Ca²⁺) ≥ 500 mg L⁻¹ or higher biomass levels (420 g L⁻¹) impeded the stable growth of submerged plants and exerted a stress effect on them, hindering travertine deposition. The morphology of travertine crystals promoted by the two submerged macrophytes was distinct. In the V. natans treatment, the crystals were square and elongated, whereas in the C. demersum treatment, they were spheraragonite, droplet-like, and petal-shaped. This study reveals the mechanisms by which submerged macrophytes promote travertine deposition and provides new insights for adopting nature-based ecological restoration strategies to sustainably maintain travertine landscapes. By leveraging the promoting effects of submerged macrophytes, travertine deposition and the aquatic environment were improved while reducing energy and chemical inputs. Such biological regulation approaches help synergistically achieve the dual objectives of geological heritage conservation and ecosystem health restoration. Full article

Cliff carvings, as significant art forms bearing historical, cultural, and religious connotations, face dual threats from natural weathering and human-induced damage. Their protection and restoration of the artistic style present pressing challenges. In recent years, the rapid advancement of digital technologies has offered new opportunities for preserving and reproducing cultural heritage. Particularly, 3D style transfer techniques are emerging as crucial tools for digital safeguarding. The advantages of three-dimensional style transfer in cultural heritage applications include dynamic stylized rendering, simulation of styles from multiple historical periods, alternative modes of exhibition, and facilitating a paradigm shift in conservation practices from static digital archiving to dynamic revitalization. This study proposes a novel 3D stylization method for cliff carvings by integrating 3D Gaussian Splatting (3DGS) and Nearest Neighbor Feature Matching (NNFM) loss metric. The method represents ancient cliff carvings as a set of optimizable 3D Gaussians representation, enabling efficient capture and processing of complex geometric structures and rich textural details. By integrating the textural and geometric characteristics of the target artistic style, 3DGS facilitates high-quality transfer of diverse artistic styles while effectively preserving the original intricate details of the carvings. Additionally, we employ the NNFM loss function to transfer 2D visual details into 3D representations while maintaining multi-perspective style consistency. Experimental results demonstrate that the proposed method exhibits significant advantages in texture fidelity, style consistency, and rendering efficiency. This research showcases the potential of our model for the digital preservation and presentation of cliff-carved cultural heritage, offering an innovative technological approach with theoretical value and practical significance. Full article

Compact carbonate stones are widely used in architectural heritage for their aesthetic value and cultural significance, yet their long-term durability in saline environments remains insufficiently understood, particularly when assessed using standard salt crystallization tests developed primarily for porous lithotypes. This study investigates salt-induced deterioration in Portoro limestone, a compact ornamental carbonate extensively employed in historic architecture, considering four commercial varieties representative of heritage applications. Salt crystallization tests were performed using saturated sodium sulphate (Na₂SO₄) and sodium chloride (NaCl) solutions following the relevant European standard procedure, with the protocol extended to 45 cycles to capture delayed deterioration processes. Both untreated specimens and samples subjected to controlled thermal pre-conditioning at 300 °C and 500 °C were tested to activate latent microstructural weaknesses. Material decay was assessed through mass variation, porosity changes, surface observations, Leeb rebound hardness and ultrasonic pulse velocity measurements. Results demonstrate that deterioration is primarily controlled by salt type and microstructural characteristics rather than by total porosity. Sodium sulphate induced severe internal damage and abrupt structural failure associated with mirabilite crystallization, often following a prolonged phase of apparent stability. In contrast, sodium chloride causes mainly superficial effects with negligible mechanical impact. Thermal pre-conditioning accelerated damage development, while non-destructive techniques revealed internal deterioration well before visible damage occurred. These findings indicate that standard crystallization tests may be inadequate for low-porosity stones and that extended-cycle approaches provide a more reliable framework for durability assessment in saline environments. Full article

Urban depopulation has become an increasingly visible phenomenon worldwide, affecting cities of different sizes and economic structures. This article develops a typology of U.S. depopulating cities beyond the Rust Belt’s iconic industrial cities, which dominate academic literature, to include a wider range of shrinking settlements in the shadows. The analysis is based on a dataset of U.S. census places constructed from decennial census population data (1990–2020) combined with employment structure indicators and spatial classification variables identifying metropolitan position and industrial specialization. Using 1990–2020 population change and three explanatory dimensions—city size, industrial heritage, and peripheral location—the analysis identified 1082 places that lost at least 10% of their population. Logistic regression showed manufacturing and mining reliance, small size, and remoteness as significant predictors of depopulation. Based on these factors, settlements are divided into seven types, from large urban centers to small peripheral towns with fewer than 5000 people. The overwhelming predominance of small towns (97%) in the sample highlights their distinct development challenges and questions the narrative of decline focused solely on larger industrial cities. By situating American trajectories within the broader shrinking cities discourse, the findings demonstrate the value of typology as a methodological tool for identifying intra-group heterogeneity, capturing regional differences, and establishing a more reliable basis for comparative urban studies. Ultimately, the study shows that urban decline in the United States is not exclusively a Rust Belt phenomenon, but a multidimensional process encompassing different scales, sectors, and geographies. Full article

This study examines the tourism value chain of the Cartagena de Indias–Santa Cruz de Mompox river corridor in Colombia. The objective is to analyze how the corridor’s territorial configuration, prioritized nodes, and inventory of attractions contribute to strengthening the sustainable integration of destinations. The research is based on three questions: (RQ1) How is the corridor’s territorial configuration structured and refined? (RQ2) Which locations should be prioritized according to the multi-criteria evaluation? (RQ3) How do the attractions and industry trends influence opportunities for strengthening the sustainable value chain? A case study design combined document review, mapping, field validation, expert consultation, multi-criteria scoring, and stakeholder surveys. The findings reveal a spatially continuous but functionally uneven system. Central nodes, such as Cartagena and Mompox, show greater integration of attractions and services, while intermediate municipalities show untapped potential, limited by insufficient promotion and training. While infrastructure and basic services are positively assessed, governance coordination and marketing remain critically deficient. Trend analysis indicates high viability for heritage and nature tourism, while eco-innovation and well-being require gradual institutional and capacity development. This study provides a replicable framework that integrates territorial mapping, prioritization matrices, and attraction-based value chain analysis for sustainable tourism in corridors. Full article

This paper explores the value of imperfections and curated decay in the conservation of architecture and public art as vehicles of cultural memory. While conventional heritage practice treats physical degradation as a threat, newer conservation ethics argue for embracing material impermanence within an aesthetics of care. We examine how acknowledging patina, weathering, and even structural decline can become an act of care, maintaining the “spirit” and authenticity of a place. The theoretical framework integrated the aesthetics of imperfection, including concepts like the Japanese wabi-sabi, which finds beauty in the incomplete and impermanent, critical heritage theory (which questions whose memories and values are preserved or excluded) and cultural memory studies (notably Nora’s notion of lieux de mémoire, where material sites become symbolic elements of communal memory). Methodologically, the article is grounded by two case-study video essays, Imperfections (Genoa) and Scars (Nicosia), as instruments of research, which provide visual analyses of decayed architectural environments. These examples illustrate how curated decay can transform abandoned buildings and war-scarred urban zones into powerful mnemonic devices, provoking reflection on history, identity and the ethics of preservation. Despite extensive theorisation of patina/age-value and curated decay, recent heritage debates offer limited operational criteria for distinguishing intentional curated decay from unmanaged neglect in lived urban conservation contexts. Drawing on ethics and aesthetics of care, this article asks if and how care can be operationalised into a decision framework for urban conservation and tests this framework through two selected buildings: Albergo dei Poveri (Genoa) and Home for Cooperation (Nicosia). The authors argue that caring for heritage does not always mean restoring it to an as-new state; curating ageing and traces of time can support remembrance, resilience, and reconciliation, enriching heritage’s role in future urban imaginaries. Full article

Jordan’s masonry archaeology across limestone, sandstone, and basalt faces escalating threats from a disconnect between conservation and architectural education. Though Jordanian archaeology has evolved into a multidisciplinary field, architecture curricula prioritize technical training over the engineering complexities of endangered sites. This study argues that engaging future architects with ancient engineering as recoverable technical knowledge, rather than as objects for specialist intervention, is essential for cultivating advocates of archaeology. It aims to develop a constructivist framework for architectural archaeology that reorients education from mere intervention toward knowledge transfer through reverse engineering. A mixed-methods experiment with architecture students at Hashemite University engaged participants in deconstructing ancient techniques through digital documentation and structural simulation and then reconstructing this knowledge for contemporary applications. A four-domain framework operationalized object-laden epistemology (technical acquisition) and value-laden ontology (constructed advocacy). Findings revealed four transformative outcomes: science-making (recovering ancient engineering as legitimate knowledge); heritage-making (sites becoming living practice); temporality-making (past–present dialogue within presentism and futurism); and advocacy-making (students as ‘custodian-transmitters’ assuming professional stewardship). By integrating architectural archaeology into core curricula, this framework reaches future architects beyond specialized programs, addressing regional gaps in community support for endangered heritage while maintaining critical reflexivity regarding power and selection in archaeological discourse. Full article