Search Results (32)

It has long been accepted that breathing gases that are physiologically inert include helium (He), neon (Ne), nitrogen (N₂), argon (Ar), krypton (Kr), xenon (Xe), and hydrogen (H₂). The term “inert gas” has been used to describe them due to their unusually high chemical stability. However, as investigations have advanced, many have shown that inert gas can have specific biological impacts when exposed to high pressure or atmospheric pressure. Additionally, different inert gases have different effects on intracellular signal transduction, ion channels, and cell membrane receptors, which are linked to their anesthetic and cell protection effects in normal or pathological processes. Through a selective analysis of the representative literature, this study offers a concise overview of the state of research on the biological impacts of inert gas and their molecular mechanisms. Full article

In this article, we consider the roles of transcrustal magma- and fluid-conducting faults (TCMFCFs) in the formation of mineral deposits, showing the importance of deep sources of heat and hydrothermal solutions in the genesis and history of deposit formation. As a result of the impact on the lithosphere of mantle plumes rising along TCMFCFs, intense block deformations and tectonic movements are generated; rift systems, and volcanic–plutonic belts spatially combined with them, are formed; and intrusive bodies are introduced. These processes cause epithermal ore formation as a consequence of the impact of mantle plumes rising along TCMFCF to the lithosphere. At hydrocarbon fields, they play extremely important roles in conductive and convective heat, as well as in mass transfer to the area of hydrocarbon generation, determining the relationship between the processes of lithogenesis and tectogenesis, and activating the generation of hydrocarbons from oil and gas source rock. Detection of TCMFCFs was carried out using MMSS (the method of microseismic sounding) and MTSM (the magnetotelluric sounding method), in combination with other geological and geophysical data. Practical examples are provided for mineral deposits where subvertical transcrustal columns of increased permeability, traced to considerable depths, have been found; the nature of these unique structures is related to faults of pre-Paleozoic emplacement, which determined the fragmentation of the sub-crystalline structure of the Earth and later, while developing, inherited the conditions of volumetric fluid dynamics, where the residual forms of functioning of fluid-conducting thermohydrocolumns are granitoid batholiths and other magmatic bodies. Experimental modeling of deep processes allowed us to identify the quantum character of crystal structure interactions of minerals with “inert” gases under elevated thermobaric conditions. The roles of helium, nitrogen, and hydrogen in changing the physical properties of rocks, in accordance with their intrastructural diffusion, has been clarified; as a result of low-energy impact, stress fields are formed in the solid rock skeleton, the structures and textures of rocks are rearranged, and general porosity develops. As the pressure increases, energetic interactions intensify, leading to deformations, phase transitions, and the formation of chemical bonds under the conditions of an unstable geological environment, instability which grows with increasing gas saturation, pressure, and temperature. The processes of heat and mass transfer through TCMFCFs to the Earth’s surface occur in stages, accompanied by a release of energy that can manifest as explosions on the surface, in coal and ore mines, and during earthquakes and volcanic eruptions. Full article

MnO₂ nanostructures were successfully synthesized via the reduction of KMnO₄ solutions using the gliding arc plasma (Plasma Glidarc) approach. Here, we highlight the effect of different plasmagenic gases, such as moist air (atmospheric air), dry air, nitrogen (N₂) or oxygen (O₂). The obtained materials were characterized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), nitrogen physisorption and scanning electron microscopy (SEM). The crystalline structures of obtained MnO₂ polymorphs are mainly γ-MnO₂ and α-MnO₂, regardless of the feeding gas. The main reactive species, in addition to nitrogenous species like NO· radical generated with moist air, dry air or N₂ gas, other oxygenated species such as H₂O₂ (E°(O₂/H₂O₂) = 0.69 V) are produced with O₂ able to reduce KMnO₄ solution (E°(KMnO₄/MnO₂) = 1.70 V). Helium gas did not allow for the plasma reduction of the KMnO₄ solution, even after 60 min of exposure. Furthermore, gas humidification did not significantly affect the precipitation time or the properties of plasma-synthesized MnO₂. Atmospheric humidified air appears to be the best plasmagenic gas, as it allows for a shorter synthesis time and leads to a large specific surface area. All plasma-synthesized MnO₂ showed good activity during the catalytic oxidation of benzene. The use of different MnO₂ polymorphs (α-, δ- and γ-MnO₂) showed that, in addition to the specific surface area, the crystalline structure significantly affects the catalytic oxidation of benzene. K⁺ species inserted within the MnO₂ structure allow for their stability during the catalytic process. This work highlights the possibility to use different plasmagenic gases to prepare MnO₂ nanostructures through plasma glidarc for the catalytic oxidation of benzene. Full article

A typical head–disk interface of hard drives can feature pressures exceeding 50 atmospheres, where the non-ideal gas effects can play an important role. One possible consequence is a change in the rate of water evaporation from the disk. This report describes a semi-analytical procedure that employs the concept of fugacity to investigate the non-ideal gas effects on the saturation pressure of water at an elevated temperature and pressure. A vapor–liquid equilibrium equation is solved to derive the saturation pressure. The results show a deviation from the ideal gas law, which is further examined through saturation pressure isotherms. At areas of low temperature and high pressure, lighter gases such as helium show about a 10% deviation from the ideal gas law, whereas heavier gases such as nitrogen deviate by up to 100%. As temperature increases, the differences between the gases decrease. Full article

In recent years, packed-bed systems for large-scale applications have emerged as a highly promising design for Thermal Energy Storage systems because of their high thermal efficiency and economic feasibility. Large-scale application systems typically include packed-bed thermal energy stores as essential components, enabling effective integration with renewable energy and processed heat. The packed-bed systems investigated in this paper utilise Magnesia as the storage medium and optimised parameters, which have previously been identified through research involving charging and discharging cycles of both the hot and cold storage systems when air is the heat transfer fluid. This includes solid particle diameters of 0.004 m, a material porosity of 0.2, an aspect ratio of 1 for the storage tank, and a mass flow rate of 13.7 kg/m³. This paper aims to present a comparative analysis of the influence of alternative heat transfer gases, namely air, argon, carbon dioxide, helium, hydrogen, and nitrogen, on the performance of Pumped Thermal Energy Storage hot and cold storage systems. The performance of the six gases in the storage system was evaluated using an axisymmetric model simulated with COMSOL Multiphysics 5.6 software, with the total energy stored and the capacity factor serving as key performance indicators. The results revealed that carbon dioxide gas was the most promising heat transfer fluid and that the packed bed could be operated efficiently over 72% and 76% of its range for hot and cold systems, respectively. Hydrogen, nitrogen, and air performed similarly but less adequately than carbon dioxide and had operating ranges of 55% and 75% for hot and cold storage. Helium and argon had the poorest performance, with optimal charging and discharging rates corresponding to 50% and 66%. Full article

The article presents a comprehensive analysis of long-term studies on hydrogen-hydrocarbon free gases (FGs) in the rocks of the Khibiny massif, systematically organized and generalized for the first time. Gasometric observations were predominantly conducted within underground mine workings, with occasional measurements taken during the drilling of exploration boreholes at the surface or in subsurface air within loose sediments. Methane is the primary component of these gases, followed in descending order by hydrogen, ethane, helium, other methane homologs, and alkenes. Nitrogen is also presumed to be present, although its proportions remain undefined. The carbon and hydrogen in FGs exhibit relatively heavy isotopic compositions, which progressively lighten from methane to ethane. The intensity of gas emissions is characterized by a gas flow rate from shot holes and boreholes, reaching up to 0.5 L/min but generally decreasing significantly within an hour of reservoir exposure. Gas-bearing areas, ranging in size from a few meters to tens of meters, are distributed irregularly and without discernible patterns. The FG content in rocks and ores varies from trace amounts to approximately 1 m³ of gas per cubic meter of undisturbed rock. These gases are primarily residual, preserved within microfractures and cavities following the isolation of fluid inclusions. Their distribution and composition may fluctuate due to the dynamic geomechanical conditions of the rock mass. The release of flammable and explosive FGs presents a significant hazard during ore deposit exploration and development, necessitating the implementation of rigorous safety measures for mining and drilling operations. Additionally, the environmental implications and potential applications of gas emissions warrant attention. Future comprehensive studies of the Khibiny gases using advanced methodologies and equipment are expected to address various scientific and practical challenges. Full article

In this paper, a highly sensitive methane (CH₄) sensor based on light-induced thermoelastic spectroscopy (LITES) and a T-shaped quartz tuning fork (QTF) with hydrogen (H₂) and helium (He) enhancement techniques are reported for the first time. The low resonant frequency self-designed T-shaped QTF was exploited for improving the energy accumulation time. H₂ and He were utilized as surrounding gases for the T-shaped QTF to minimize energy loss, thereby enhancing the sensitivity of the LITES sensor. Additionally, a fiber-coupled multi-pass cell (FC-MPC) with a 40 m optical length was utilized to improve the optical absorption of CH₄. The frequency response of the T-shaped QTF with different concentrations of H₂ and He was investigated, and the Q factor in the H₂ and He environment increased significantly. Compared to operating QTF in a nitrogen (N₂) environment, the signal amplitude was enhanced by 2.9 times and 1.9 times in pure H₂ and He environments, respectively. This enhancement corresponded to a minimum detection limit (MDL) of 80.3 ppb and 113.6 ppb. Under different CH₄ concentrations, the T-shaped QTF-based H₂-enhanced CH₄-LITES sensor showed an excellent linear response. Furthermore, through Allan deviation analysis, the MDL of the T-shaped QTF-based H₂-enhanced CH₄-LITES can reach 38 ppb with an 800 s integration time. Full article

This study computationally examined the Richtmyer–Meshkov instability (RMI) evolution in a helium backward-triangular bubble immersed in monatomic argon, diatomic nitrogen, and polyatomic methane under planar shock wave interactions. Using high-fidelity numerical simulations based on the compressible Navier–Fourier equations based on the Boltzmann–Curtiss kinetic framework and simulated via a modal discontinuous Galerkin scheme, we analyze the complex interplay of shock-bubble dynamics. Key findings reveal distinct thermal non-equilibrium effects, vorticity generation, enstrophy evolution, kinetic energy dissipation, and interface deformation across gases. Methane, with its molecular complexity and higher viscosity, exhibits the highest levels of vorticity production, enstrophy, and kinetic energy, leading to pronounced Kelvin–Helmholtz instabilities and enhanced mixing. Conversely, argon, due to its simpler atomic structure, shows weaker deformation and mixing. Thermal non-equilibrium effects, quantified by the Rayleigh–Onsager dissipation function, are most significant in methane, indicating delayed energy relaxation and intense turbulence. This study highlights the pivotal role of molecular properties, specific heat ratio, and bulk viscosity in shaping RMI dynamics in polyatomic gases, offering insights on uses such as high-speed aerodynamics, inertial confinement fusion, and supersonic mixing. Full article

This study explores the effects of different passivation gases on the properties of polymers formed on aluminum (Al) sidewalls during the etching process in Al-based interconnect structures. The research compares the use of nitrogen (N₂) and ethylene diluted with helium (C₂H₄/He) as passivation gases, focusing on the resulting polymer’s composition, thickness, and strength, as well as the levels of residual chlorine post-etch. The findings reveal that using C₂H₄ leads to the formation of a thinner, weaker polymer with lower chlorine residue compared to the thicker, stronger polymer formed with N₂. Elemental analysis further highlights significant differences in carbon and oxygen content, with C₂H₄-based polymers exhibiting lower carbon and higher oxygen levels. These results underscore the critical impact of passivation gas choice on the etching process and the integrity of Al-based interconnects, offering valuable insights for optimizing metal etching processes in semiconductor manufacturing. Full article

This study explores the fabrication of tannic acid-crosslinked gelatin nanofibers via electrospinning, followed by helium and nitrogen plasma treatment to enhance their biofunctionality, which was assessed using fibroblast cells. The nanofibers were characterized using scanning electron microscopy, atomic force microscopy, attenuated total reflection Fourier transform infrared spectroscopy, X-ray diffraction, and water contact angle measurements before and after treatment. Helium and nitrogen gas plasma were employed to modify the nanofiber surfaces. Results indicated that helium and nitrogen plasma treatment significantly increased the hydrophilicity and biofunctionality of the nanofibers by 5.1° ± 0.6 and 15.6° ± 2.2, respectively, making them more suitable for human skin fibroblast applications. To investigate the impact of plasma treatment on gelatin, we employed a computational model using density functional theory with the B3LYP/6-31+G(d) method. This model represented gelatin as an amino acid chain composed of glycine, hydroxyproline, and proline, interacting with plasma particles. Vibrational analysis of these systems was used to interpret the vibrational spectra of untreated and plasma-treated gelatin. To further correlate with experimental findings, molecular dynamics simulations were performed on a system of three interacting gelatin chains. These simulations explored changes in amino acid bonding. The computational results align with experimental observations. Comprehensive analyses confirmed that these treatments improved hydrophilicity and biofunctionality, supporting the use of plasma-treated gelatin nanofibers in skin tissue engineering applications. Gelatin’s natural biopolymer properties and the versatility of plasma surface modification techniques underscore its potential in regenerating cartilage, skin, circulatory tissues, and hamstrings. Full article

Concrete is widely utilized across various industries as a containment material. One essential property related to its performance is permeability, which determines its ability to allow the passage of gases or liquids through its pores and capillaries and even the transmission of aggressive agents. This study focused on investigating the permeability of gases with varying atomic weights and molecular volumes, such as helium, nitrogen, oxygen, and argon, to pass through concrete. The primary objective was to determine the significance of variation in permeability and to evaluate and differentiate their behavior. To achieve this, concrete test specimens were employed, and factors such as cold joint impact, gas pressure, and specimen saturation levels were considered. Throughout the study, changes in weight, specimen humidity, resistivity, and ultrasonic pulse velocity were monitored. The findings suggested that within concrete, the variation in permeability for these gases is negligible. By utilizing the acquired data, the present study estimated the permeability of hydrogen through mathematical models based on gas pressure and concrete thickness. These insights contribute to a deeper comprehension of concrete gas permeability and its potential impact on improving hydrogen containment. Full article

Three-phase gliding arc discharge reactors are devices in which it is difficult to maintain stable plasma parameters, be it electrically, physically, or chemically. The main cause of plasma instability is the source, which is freely burning arcs in a three-phase system. In addition, these arcs burn at low currents and are intensively cooled, further increasing their instability. These instabilities translate into the electrical characteristics of the plasma reactor. The analysis for the four gases nitrogen, argon, helium, and air shows that the type of plasma-generating gas and its physical parameters have a strong influence on the operational characteristics of the plasma reactor. Current–voltage, power and frequency characteristics of the plasma reactor were plotted experimentally. Characteristics obtained in this way make it possible to determine the areas of effective operation of the plasma reactor, and to estimate the quality of the generated plasma. Based on the characteristics obtained, a method of controlling the plasma parameters can be developed. Full article

Hydrogen is a carbon-free energy source that can be obtained from various sources. The blending of hydrogen represents a transitional phase in the shift from natural gas systems to hydrogen-based systems. However, concerns about the safety implications of introducing hydrogen have led to extensive discussions. This paper utilizes Fluent 17.0 numerical simulation software to simulate the leakage of hydrogen-blended natural gas in a closed domestic kitchen and analyze the concentration distribution and its variation pattern after a leakage. An experimental platform is set up, and a mixture of nitrogen and helium gas is used as a substitute for hydrogen-blended natural gas for the simulations and experiments. The simulation results demonstrate that the leaked gas spreads and accumulates towards the top of the space, gradually filling the entire area as the leak persists. As the hydrogen content in the leaked gas increases, the dispersion capacity of the gas in the confined space also increases. Furthermore, as the flow rate of the leaked gas increases, the average concentration of the leaked gas rises, and the gas stratification in the confined kitchen diminishes. The concentration distribution observed in the experiments aligns with the simulation results. After establishing the feasibility conditions of the model, the dispersion of the hydrogen-blended natural gas in the kitchen is further simulated. The results suggest that blending hydrogen into the gas enhances the dispersion of the gas after a leak, leading to a wider distribution within the kitchen and an increased risk in the event of a leak. Additionally, this paper employs the CASD module of FLACS 11.0 software to construct a three-dimensional geometric model of the domestic kitchen for simulation studies on the explosion of hydrogen-blended natural gas in a confined space. By adjusting the hydrogen ratio in the combustible gases present in the space and examining the variations in hydrogen concentration and external conditions, such as opening or closing the door, the influence on parameters including the peak explosion pressure, explosion overpressure, explosion flame temperature, and explosion response time are examined. Furthermore, the extent of the explosion area is determined, and the effect of hydrogen on the blast is clarified. Full article

The presence of high concentrations of flammable gases and volatile organic compounds in the atmosphere has been widely reported to be detrimental to human survival. A lot of research effort has been put toward finding an efficient means of quick detection of these gases below their ‘immediately dangerous to life or health’ concentrations. Detecting these gases in an oxygen-deficient environment is a crucial task to consider and has been overlooked. In this research, double-substitution spinel with the chemical formula Co_1−2xNi_xMn_xFe_2−yCe_yO₄, where 0 ≤ x = y ≤ 0.3, was prepared via the glycol-thermal technique. The final products, following appropriate substitution, were CoFe₂O₄ (dried naturally), CoFe₂O₄ (dried with infrared lamp), Co_0.8Ni_0.1Mn_0.1Fe_1.9Ce_0.1O₄, Co_0.6Ni_0.2Mn_0.2Fe_1.8Ce_0.2O₄ and Co_0.4Ni_0.3Mn_0.3Fe_1.7Ce_0.3O₄ spinel ferrites. The X-ray diffractometry (XRD), high-resolution transmission electron micrographs (HRTEM) and X-ray photoelectron spectroscopy (XPS) of the samples confirmed the formation of the spinel. The gas sensing performance of these samples was tested at the operating temperature of 225 °C toward liquefied petroleum gas (LPG), ammonia, ethanol and propanol. The Co_0.8Ni_0.1Mn_0.1Fe_1.9Ce_0.1O₄-based sensor was selective to LPG, with a high response of 116.43 toward 6000 ppm of LPG when helium was used as the carrier gas, 3.35 when dry air was the carrier gas, 4.4 when nitrogen was the carrier gas, but it was not sensitive when argon was used as the carrier gas. Full article

Due to the low boiling point of helium, the nitrogen-rich off gas of the nitrogen rejection unit (NRU) in the liquefied natural gas (LNG) plant usually contains a small amount of CH₄, approximately 1–4% He, and associated gases, such as H₂. However, it is difficult to separate hydrogen and helium. Here, we propose two different integrated processes coupled with membrane separation, pressure swing adsorption (PSA), and the electrochemical hydrogen pump (EHP) based on different sequences of hydrogen gas removal. Both processes use membrane separation and PSA in order to recover and purify helium, and the EHP is used to remove hydrogen. The processes were strictly simulated using UniSim Design, and an economic assessment was conducted. The results of the economic assessment show that flowsheet #2 was more cost-effective due to the significant reduction in the capacity of the compressor and PSA because of the pre-removal of hydrogen. Additionally, using the response surface methodology (RSM), a Box–Behnken design experiment was conducted, and an accurate and reliable quadratic response surface regression model was fitted through variance analysis. The optimized operating parameters for the integrated process were determined as follows: the membrane area of M101 was 966.6 m², the permeate pressure of M101 was 100 kPa, and the membrane area of M102 was 41.2 m². The maximum recovery fraction was 90.66%, and the minimum cost of helium production was 2.21 $/kg. Thus, proposed flowsheet #2 has prospects and value for industrial application. Full article