Search Results (36)

A naturally sourced phenolic compound, umbelliferone, has been used to synthesize four monofunctional benzoxazines, two of which have been previously synthesized from aniline and furfurylamine. This study contributes two more—using benzylamine and phenethylamine—to provide insight into how the amine’s aromatic group and aliphatic chain length influence resulting properties. The proposed chemical structures of the novel monomers are confirmed by ¹H nuclear magnetic resonance (¹H-NMR) and ¹H-¹H nuclear Overhauser effect spectroscopy (NOESY). The polymerization behavior of each resin is determined by differential scanning calorimetry (DSC). The thermal degradation pattern and the flammability of each polymer are assessed by thermogravimetric analysis (TGA) and microscale combustion calorimetry (MCC), respectively. Char yields between 49% and 63% suggest the thermoset materials to be thermally stable and competitive for thermally demanding applications. All four polybenzoxazines demonstrate non-ignitable behavior, with heat release capacities below 100 J/g·K. Structure–property analyses on the two newly synthesized compounds have been provided to deepen our existing understanding of umbelliferone-benzoxazine systems, particularly regarding the effect of the aminic moiety on thermal properties. Full article

A novel quinoline-containing benzoxazine resin, 8HQ-fa, has been successfully synthesized at room temperature using sustainable raw materials, such as 8-hydroxyquinoline and furfurylamine as the phenol and amine source, respectively. The chemical structure of the hereinafter referred to as quinolinoxazine is fully characterized by Fourier transform infrared spectroscopy (FT-IR), ¹H and ¹³C nuclear magnetic resonance spectroscopy (NMR), as well as by 2D ¹H–¹H nuclear Overhauser effect spectroscopy (NOESY) and ¹H–¹³C heteronuclear multiple quantum correlation (HMQC) NMR. Thermal properties and polymerization behavior of the monomer are studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The resulting polymer is also characterized in terms of its thermal and fire-related properties by DSC, TGA, and microscale combustion calorimetry (MCC). The resulting thermoset, poly(8HQ-fa), presents good thermal stability as evidenced by its T_g (201 °C), T_d5 and T_d10 (307 and 351 °C, respectively), and char yield (42%), and low flammability as determined by the LOI, heat release capacity, and total heat released values (34.3, 143 J/gK, and 10.8 kJ/g, respectively), making it a self-extinguishing thermoset. The combination of properties and advantages in the synthesis of 8HQ-fa, accompanied by a low polymerization temperature, suggests its great potential in the field of high-performance polymers. Full article

Benzoxazine resins are gaining attention for their impressive thermal stability, low water uptake, and strong mechanical properties. In this work, two new bio-based benzoxazine monomers were developed using renewable arbutin: one combined with 3-(2-aminoethylamino) propyltrimethoxysilane (AB), and the other with furfurylamine (AF). Both were synthesized using a simple Mannich-type reaction and verified through FT-IR and ¹H-NMR spectroscopy. By blending these monomers in different ratios, copolymers with adjustable thermal, dielectric, and surface characteristics were produced. Thermal analysis showed that the materials had broad processing windows and cured effectively, while thermogravimetric testing confirmed excellent heat resistance—especially in AF-rich blends, which left behind more char. The structural changes obtained during curing process were monitored using FT-IR, and XPS verified the presence of key elements like carbon, oxygen, nitrogen, and silicon. SEM imaging revealed that AB-based materials had smoother surfaces, while AF-based ones were rougher; the copolymers fell in between. Dielectric testing showed that increasing AF content raised both permittivity and loss, and contact angle measurements confirmed that surfaces ranged from water-repellent (AB) to water-attracting (AF). Overall, these biopolymers (AB/AF copolymers) synthesized from arbutin combine environmental sustainability with customizability, making them strong candidates for use in electronics, protective coatings, and flame-resistant composite materials. Full article

The repair efficiency of various self-healing materials often depends on the ability of the prepolymer and curing agent to form mixtures. This paper presents a synthesis and study of the properties of modified self-healing polyurethanes using the Diels–Alder reaction (DA reaction), obtained from a maleimide-terminated preform and a series of furan–urethane curing agents. The most commonly used isocyanates (4,4′-methylene diphenyl diisocyanate (MDI), 2,4-tolylene diisocyanate (TDI), and hexamethylene diisocyanate (HDI)) and furan derivatives (furfurylamine, difurfurylamine, and furfuryl alcohol) were used as initial reagents for the synthesis of curing agents. For comparative analysis, polyurethanes were also obtained using the well-known “traditional” approach—from furan-terminated prepolymers based on mono- and difurfurylamine, as well as furfuryl alcohol and the often-used bismaleimide curing agent 1,10-(methylenedi-1,4-phenylene)bismaleimide (BMI). The structure and composition of all polymers were studied using spectroscopic methods. Molecular mass was determined using gel permeation chromatography (GPC). Thermal properties were studied using TGA, DSC, and TMA methods. The mechanical and self-healing properties of the materials were investigated via a uniaxial tensile test. Visual assessment of the completeness of damage restoration after the self-healing cycle was carried out using a scanning electron microscope. It was shown that the proposed modified approach helps obtain more durable polyurethanes with a high degree of self-healing of mechanical properties after damage. Full article

In this study, a novel bio-based oxazine resin was synthesized through the reaction of naturally renewable materials: cardanol and furfurylamine. The molecular structure of the target product was confirmed via comprehensive characterization techniques, including Fourier-transform Infrared Spectroscopy (FT-IR), Gel Permeation Chromatography (GPC), Mass Spectrometry (MS), and Nuclear Magnetic Resonance (NMR). Differential Scanning Calorimetry (DSC) revealed that the curing process of cardanol-furfurylamine oxazine (CFZ) exhibited three exothermic peaks (~140, ~240, ~270 °C), which not only helped to optimize the processing conditions but also effectively enhanced the material properties. In the modification experiments, CFZ had been blended and cured with benzoxazine (BZ) at the mass ratios of 2:98, 5:95, 10:90, 20:80, and 40:60. Dynamic Mechanical Thermal Analysis (DMTA) further showed an elevated Loss Factor (tan δ) peak of CFZ-BZ resin, suggesting significantly enhanced toughness. Notably, when the content of the CFZ resin in the composite reached only 5%, the storage modulus achieved its maximum value, highlighting that minimal addition of CFZ resin can optimize the rigidity of the composite, which would drastically reduce material costs and simplify the process. Impact strength testing demonstrated that the impact resistance of CFZ-BZ resin was 6.42 times higher than that of pristine BZ. By integrating renewable materials with rational molecular design, this novel oxazine resin synergistically combines high-temperature resistance, superior toughness, and efficient modification at low loading, positioning it as a promising candidate to replace conventional petroleum-based resins in aerospace, renewable energy, and electronic packaging applications. Full article

Furan/maleimide dynamic covalent chemistry has been extensively used to fabricate re-workable and self-healing thermosets. Understanding the relationship between crosslinker structure, network dynamics, and material final properties, however, remains a challenge. This study introduces self-healing and shape-memory thermosets derived from furan-functionalized polyketones (PKFU) crosslinked with aromatic bis-maleimides, i.e., 1,1′-(methylenedi-4,1-phenylene)bis-maleimide (BISM1) and bis(3-ethyl-5-methyl-4-maleimidophenyl)methane (BISM2), via a thermally reversible Diels-Alder reaction. Polyketones were chemically modified with furfurylamine through the Paal-Knorr reaction, achieving varying furan grafting ratios. The resulting networks, characterized by ATR-FTIR, ¹H-NMR, gel permeation chromatography (GPC), differential scanning calorimetry (DSC), and rheology, demonstrated tunable thermomechanical properties. BISM2-based thermosets exhibited enhanced thermal stability and reversibility over a broad temperature range (20–120 °C), with a shape recovery ratio of up to 89% and complete self-healing at 120 °C within 5 min. These findings highlight the potential of polyketone-based thermosets for applications requiring adaptive thermomechanical properties, efficient self-repair, and sustainability. Full article

The need to transition from fossil fuels to renewables arises from factors such as depletion, price fluctuations, and environmental considerations. Lignocellulosic biomass, being abundant, and quickly renewable, and not interfering with food supplies, offers a standout alternative for chemical production. This paper explores the energetic characteristics of two derivatives of furfural—a versatile chemical obtained from biomass with great potential for commercial sustainable chemical and fuel production. The standard (p° = 0.1 MPa) molar enthalpies of formation of the liquids furfurylamine and 5-methylfurfurylamine were derived from the standard molar energies of combustion, determined in oxygen and at T = 298.15 K, by static bomb combustion calorimetry. Their standard molar enthalpies of vaporization were also determined at the same temperature using high-temperature Calvet microcalorimetry. By combining these data, the gas-phase enthalpies of formation at T = 298.15 K were calculated as −(43.5 ± 1.4) kJ·mol⁻¹ for furfurylamine, and −(81.2 ± 1.7) kJ·mol⁻¹ for 5-methylfurfurylamine. Furthermore, a theoretical analysis using G3 level calculations was performed, comparing the calculated enthalpies of formation with the experimental values to validate both results. This method has been successfully applied to similar molecules. The discussion looks into substituent effects in terms of stability and compares them with similar compounds. Full article

The nanocomposites with reversible cross-linking covalent bonds were prepared by reacting furfurylamine (FA)-modified diglycidyl ether of bisphenol A (DGEBA) and furfuryl-functionalized aniline trimer-modified graphene (TFAT-G) with bismaleimide (BMI) via the Diels-Alder (DA) reaction. The successful synthesis of the TFAT modifier is confirmed by nuclear magnetic resonance (NMR) hydrogen spectroscopy and IR spectroscopy tests. The structure and properties of TFAT-G epoxy nanocomposites are characterized by scanning electron microscopy (SEM), differential scanning calorimeter (DSC), tensile, and resistivity. The results show that TFAT-G was uniformly dispersed in the resin, and 1 wt% TFAT-G composites increased to 233% for tensile strength, 63% for elongation at break, 66% for modulus, and 7.8 °C for Tg. In addition, the addition of unmodified graphene degrades the mechanical properties of the composite. Overall, the graphene/self-healing resin nanocomposites have both good self-healing function and electrical conductivity by adding 1 wt% modified graphene; this allows for the maintenance of the original 83% strength and 89% electrical conductivity after one cycle of heating repair. Full article

Five new derivatives were obtained utilizing 4-chloro-7-nitrobenzofurazan (NBD-chloride) in combination with furfurylamine, adamantylamine, aminohippuric acid, phenylalanine, and dehydroabietylamine. These derivatives were then subjected to a comparative analysis of their physical, chemical, and certain biological properties alongside two analogous and known compounds derived from the glycine and 4-amino-TEMPO free radical. Full article

In this work, the preparation and systematic investigation of cross-linked polyurethane-epoxy (PU-EP) polymer systems are reported. The PU-EP polymers were prepared using a reaction of isocyanate (NCO)-terminated PU-prepolymer with diglycidyl ether of bisphenol A (DGEBA)-amine cooligomer. The oligomerization of DGEBA was carried out by adding furfurylamine (FA) or ethanolamine (EA), resulting in DGEBA-amine cooligomers. For the synthesis of NCO-terminated PU-prepolymer, poly(ε-caprolactone)diol (PCD) (M_n = 2 kg/mol) and 1,6-hexamethylene diisocyanate (HDI) were used. The cross-linking was achieved by adding DGEBA-amine cooligomer to PU-prepolymer, in which the obtained urethane bonds, due to the presence of free hydroxil groups in the activated DGEBA, served as netpoints. During cross-linking, ethanolamine provides an additional free hydroxyl group for the formation of a new urethane bond, while furfurylamine can serve as a thermoreversible coupling element (e.g., Diels–Alder adduct). The PU-EP networks were characterized using attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR), differential scanning calorimetry (DSC), dynamical mechanical analysis (DMA) and scanning electron microscopy (SEM). The DMA curves of some PU-EPs (depending on the compositions and the synthetic method) revealed a plateau-like region above the melting temperature (T_m) of PCD, confirming the presence of a cross-linked structure. This property resulted in a shape memory (SM) behavior for these samples, which can be fine-tuned in the presence of furfurylamine through the formation of additional thermoreversible bonds (e.g., Diels–Alder adduct). Full article

Building blocks with amine functionality are crucial in the chemical industry. Biocatalytic syntheses and chemicals derived from renewable resources are increasingly desired to achieve sustainable production of these amines. As a result, renewable materials such as furfurals, especially furfurylamines like 5-(hydroxymethyl)furfurylamine (HMFA) and 2,5-di(aminomethyl)furan (DAF), are gaining increasing attention. In this study, we identified four different amine transaminases (ATAs) that catalyze the reductive amination of 5-(hydroxymethyl)furfural (HMF) and 2,5-diformylfuran (DFF). We successfully immobilized these ATAs on glutaraldehyde-functionalized amine beads using multiple binding and on amine beads by site-selective binding of the unique Cα-formylglycine within an aldehyde tag. All immobilized ATAs were efficiently reused in five repetitive cycles of reductive amination of HMF with alanine as co-substrate, while the ATA from Silicibacter pomeroyi (ATA-Spo) also exhibited high stability for reuse when isopropylamine was used as an amine donor. Additionally, immobilized ATA-Spo yielded high conversion in the batch syntheses of HMFA and DAF using alanine (87% and 87%, respectively) or isopropylamine (99% and 98%, respectively) as amine donors. We further demonstrated that ATA-Spo was effective for the reductive amination of HMF with alanine or isopropylamine in continuous-flow catalysis with high conversion up to 12 days (48% and 41%, respectively). Full article

Polybenzoxazines (Pbzs) are considered as an advanced class of thermosetting phenolic resins as they overcome the shortcomings associated with novolac and resole type phenolic resins. Several advantages of these materials include curing without the use of catalysts, release of non-toxic by-products during curing, molecular design flexibility, near-zero shrinkage of the cured materials, low water absorption and so on. In spite of all these advantages, the brittleness of Pbz is a knotty problem that could be solved by blending with other polymers. Chitosan (Ch), has been extensively investigated in this context, but its thermal and mechanical properties rule out its practical applications. The purpose of this work is to fabricate an entirely bio-based Pbz films by blending chitosan with benzoxazine (Bzo), which is synthesized from curcumin and furfuryl amine (curcumin-furfurylamine-based Bzo, C-fu), by making use of a benign Schiff base chemistry. FT-IR and ¹H-NMR spectroscopy were used to confirm the structure of C-fu. The impact of chitosan on benzoxazine polymerization was examined using FT-IR and DSC analyses. Further evidence for synergistic interactions was provided by DSC, SEM, TGA, and tensile testing. By incorporating C-fu into Ch, Ch-grafted-poly(C-fu) films were obtained with enhanced chemical resistance and tensile strength. The bio-based polymer films produced inhibited the growth of Staphylococcus aureus and Escherichia coli, by reversible labile linkages, expanding Ch galleries, and releasing phenolic species, which was 125 times stronger than bare Ch. In addition, synthesized polybenzoxazine films [Ch/Poly(C-fu)] showed significant dose-dependent antibiofilm activity against S. aureus and E. coli as determined by confirmed by confocal laser scanning microscopy (CLSM). This study suggests that bio-based Ch-graft-polymer material provide improved anti-bacterial property and characteristics that may be considered as a possibility in the near future for wound healing and implant applications. Full article

An atomic-oxygen-erosion-resistant fluorinated benzoxazine resin and composite were developed. The benzoxazine resin, abbreviated as “BAF-oda-fu,” consists of four benzoxazine rings, and was synthesized from bisphenol AF (BAF), 4,4′-oxydianiline (oda), furfurylamine (fu), and paraformaldehyde. The resin was characterized by infrared spectroscopy (FT-IR), proton nuclear magnetic resonance spectroscopy (¹H NMR), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). An analysis of the solvent-washed product showed a technical grade purity (>95%) and a yield of approximately 85%. Subsequent polymerization of the resin was successfully performed by heating step-wise and opening the benzoxazine rings to form a crosslinked network. Thermal analyses showed a melting temperature of 115 °C and polymerization temperature of 238 °C, both being characteristic values of benzoxazine monomers. The benzoxazine resin was also blended with polyoctahedral sisesquoxane (POSS) and reinforced with alumina fibers. The Tg of the resin, as determined by DMA of the composite, could reach as high as 308 °C when post-curing and the POSS additive were utilized. The low-Earth orbit atomic-oxygen erosion rate was simulated by an RF plasma asher/etcher. The atomic-oxygen resistance of poly(BAF-oda-fu) fell along an established trend line based on its fluorine content. Full article

The healing efficiency in self-healing materials is bound by the ability to form blends between the prepolymer and curing agent. One of the problems in the development of self-healing polymers is the reduced affinity of the bismaleimide curing agent for the elastomeric furan-containing matrix. Even when stoichiometric amounts of both components are applied, incompatibility of components can significantly reduce the effectiveness of self-healing, and lead to undesirable side effects, such as crystallization of the curing agent, in the thickness and on the surface. This is exactly what we have seen in the development of linear and cross-linked PUs using BMI as a hardener. In this work, we present a new series of the di- and tetrafuranic isocyanate-related ureas—promising curing agents for the development of polyurethanes-like self-healing materials via the Diels–Alder reaction. The commonly used isocyanates (4,4′-Methylene diphenyl diisocyanate, MDI; 2,4-Tolylene diisocyanate, TDI; and Hexamethylene diisocyanate, HDI) and furfurylamine, difurfurylamine, and furfuryl alcohol (derived from biorenewables) as furanic compounds were utilized for synthesis. The remendable polyurethane for testing was synthesized from a maleimide-terminated prepolymer and one of the T-series urea. Self-healing properties were investigated by thermal analysis. Molecular mass was determined by gel permeation chromatography. The properties of the new polymer were compared with polyurethane from a furan-terminated analog. Visual tests showed that the obtained material has thermally induced self-healing abilities. Resulting polyurethane (PU) has a rather low fusing point and thus may be used as potential material for Fused Deposition Modeling (FDM) 3D printing. Full article