Search Results (87)

This work presents the design and experimental validation of a 2 × 2 MIMO communication system assisted by a directly modulated analog radio-over-fiber (A-RoF) fronthaul, targeting low-complexity connectivity solutions for underserved/remote regions. The study details the complete end-to-end architecture, including a wireless access segment to complement the 20-km optical fronthaul link. The system is implemented on an software defined radio (SDR) platform using GNU Radio 3.7.11, running on Ubuntu 18.04 with kernel 4.15.0-213-generic. It also employs adaptive modulation driven by real-time signal-to-noise ratio (SNR) estimation to keep bit error rate (BER) close to zero while maximizing throughput. Performance is characterized over 20 km of single-mode fiber (SMF) using coarse wavelength division multiplexing (WDM) and assessed through root mean square error vector magnitude (${\mathrm{EVM}}_{\mathrm{RMS}}$), throughput, and spectral integrity. The results identify an optimum radio-frequency drive region around $-16$ dBm enabling high-order modulation (e.g., 256-QAM), whereas RF input powers above approximately $-10$ dBm increase ${\mathrm{EVM}}_{\mathrm{RMS}}$ due to nonlinearity in the RF front-end/low-noise amplifier (LNA) and direct modulation stage, forcing the adaptive scheme to reduce modulation order and throughput. Over the optical-power sweep, when the incident optical power exceeds approximately $-8$ dBm, the system reaches ∼130 Mbps (24-MHz channel) with ${\mathrm{EVM}}_{\mathrm{RMS}}$ approaching ∼1%, highlighting the need for careful joint tuning of RF drive, optical launch power, and wavelength allocation across transceivers. Finally, the integrated access link employs diplexers for transmitter/receiver separation in a 2 × 2 configuration with 2.8 m antenna separation and low channel correlation, demonstrating a 10 m proof-of-concept range and enabling end-to-end spectrum/EVM/throughput observations across the full communication chain. Full article

Techno-economic analysis (TEA) plays a vital role in assessing the feasibility and scalability of emerging technologies, especially in the context of innovation and development. Central to any effective TEA is a reliable and detailed model of capital and operational costs. This paper reports the development of such a model for optical networks in the framework of the SEASON project, aimed at supporting a broad spectrum of techno-economic evaluations. The model is constructed using publicly available data and expert insights from project participants. Its generalizable design allows it to be used both within the SEASON project and as a reference for other studies. By harmonizing assumptions and cost parameters, the model fosters consistency across different analyses. It includes cost and power consumption data for a wide range of commercially available optical network components (including transceivers for point-to-multipoint communications), introduces a statistical framework for estimating values for emerging technologies, and provides a cost model for multiband-doped fiber amplifiers. To demonstrate its practical relevance, the paper applies the model to two case studies: an evaluation of how the cost of various multiband node architectures scales with network traffic in meshed topologies and a comparison of different transport solutions to carry fronthaul flows in the radio access network. Full article

With the increasing demand for high throughput and ultra-dense small cell deployment in the next-generation communication networks, spectrum resources are becoming increasingly strained. At the same time, the security risks posed by eavesdropping remain a significant concern, particularly due to the broadcast-access property of optical fronthaul networks. To address these challenges, we propose a high-security, high-spectrum efficiency radio-over-fiber (RoF) system in this paper, which leverages compressive sensing (CS)-based algorithms and chaotic encryption. An 8 Gbit/s RoF system is experimentally demonstrated, with 10 km optical fiber transmission and 20 GHz radio frequency (RF) transmission. In our experiment, spectrum efficiency is enhanced by compressing transmission data and reducing the quantization bit requirements, while security is maintained with minimal degradation in signal quality. The system could recover the signal correctly after dequantization with 6-bit fronthaul quantization, achieving a structural similarity index (SSIM) of 0.952 for the legitimate receiver (Bob) at a compression ratio of 0.75. In contrast, the SSIM for the unauthorized receiver (Eve) is only 0.073, highlighting the effectiveness of the proposed security approach. Full article

Accurate prediction of maximum flow latency is crucial for ensuring the efficient transport of latency-sensitive fronthaul traffic in packet-switched Xhaul networks while maintaining the reliable operation of 5G and beyond Radio Access Networks (RANs). Deterministic worst-case (WC) models provide strict latency guarantees but tend to overestimate actual delays, resulting in resource over-provisioning and inefficient network utilization. To address this limitation, this study evaluates a data-driven Quantile Regression (QR) model for latency prediction in Time-Sensitive Networking (TSN)-enabled packet-switched Xhaul networks operating under dynamic traffic conditions. The proposed QR model estimates high-percentile (tail) latency values by leveraging both deterministic and queuing-related data features. Its performance is quantitatively compared with the WC estimator across diverse network topologies and traffic load scenarios. The results demonstrate that the QR model achieves significantly higher prediction accuracy—particularly for midhaul flows—while still maintaining compliance with latency constraints. Furthermore, when applied to dynamic Xhaul network operation, QR-based latency predictions enable a reduction in active processing-node utilization compared with WC-based estimations. These findings confirm that data-driven models can effectively complement deterministic methods in supporting latency-aware optimization and adaptive operation of 5G/6G Xhaul networks. Full article

Beyond-5G wireless systems increasingly rely on distributed massive multiple-input multiple-output (MIMO) architectures to achieve high spectral efficiency, low latency, and wide coverage. A key challenge in such networks is that cooperating base stations (BSs) often possess different levels of channel state information (CSI) due to fronthaul constraints, user mobility, or hardware limitation. In this paper, we propose two novel detectors that enable cooperation between BSs with differing CSI availability. In this setup, some BSs have access to instantaneous CSI, while others only have long-term channel information. The proposed detectors—termed the coherent/non-coherent (CNC) detector and the differential CNC detector—integrate coherent and non-coherent approaches to signal detection. This framework allows BSs with only long-term information to actively contribute to the detection process, while leveraging instantaneous CSI where available. This approach enables the system to integrate the advantages of non-coherent detection with the precision of coherent processing, improving overall performance without requiring full CSI at all cooperating BSs. We formulate the detectors based on the maximum likelihood (ML) criterion and derive analytical expressions for their pairwise block error probabilities under Rayleigh fading channels. Leveraging the pairwise block error probability expression for the CNC detector, we derive a tight upper bound on the average block error probability. Numerical results show that the CNC and differential CNC detectors outperform their respective single-BS baseline-coherent ML and non-coherent differential detection. Moreover, both detectors demonstrate strong resilience to mid-to-high range correlation at the BS antennas. Full article

Future wireless networks are expected to deliver enhanced spectral efficiency while being energy efficient. MIMO and other non-orthogonal transmission schemes, such as non-orthogonal multiple access (NOMA), offer substantial theoretical spectral efficiency gains. However, these gains have yet to translate into practical deployments, largely due to limitations in current signal processing methods. Linear transceiver processing, though widely adopted, fails to fully exploit non-orthogonal transmissions, forcing massive MIMO systems to use a disproportionately large number of RF chains for relatively few streams, increasing power consumption. Non-linear processing can unlock the full potential of non-orthogonal schemes but is hindered by high computational complexity and integration challenges. Moreover, existing message-passing receivers for NOMA depend on specially designed sparse signals, limiting resource allocation flexibility and efficiency. This work presents NL-COMM, an efficient non-linear processing framework that translates the theoretical gains of non-orthogonal transmissions into practical benefits for both the uplink and downlink. NL-COMM delivers over 200% spectral efficiency gains, enables 50% reductions in antennas and RF chains (and thus base station power consumption), and increases concurrently supported users by 450%. In distributed MIMO deployments, the antenna reduction halves fronthaul bandwidth requirements, mitigating a key system bottleneck. Furthermore, NL-COMM offers the flexibility to unlock new NOMA schemes. Finally, we present both hardware and software architectures for NL-COMM that support massively parallel execution, demonstrating how advanced non-linear processing can be realized in practice to meet the demands of next-generation networks. Full article

This work presents an 80 Gbps photonics-aided millimeter-wave (mm Wave) wireless communication system employing 16-Quadrature Amplitude Modulation (16-QAM) and a 1 × 2 single-input multiple-output (SIMO) architecture with maximum ratio combining (MRC) to achieve robust 87.5 GHz transmission over 4.6 km. By utilizing polarization-diverse optical heterodyne generation and spatial diversity reception, the system enhances spectral efficiency while addressing the low signal-to-noise ratio (SNR) and channel distortions inherent in long-haul links. A blind equalization scheme combining the constant modulus algorithm (CMA) and decision-directed least mean squares (DD-LMS) filtering enables rapid convergence and suppresses residual inter-symbol interference, effectively mitigating polarization drift and phase noise. The experimental results demonstrate an SNR gain of approximately 3 dB and a significant bit error rate (BER) reduction with MRC compared to single-antenna reception, along with improved SNR performance in multi-antenna configurations. The synergy of photonic mm Wave generation, adaptive spatial diversity, and pilot-free digital signal processing (DSP) establishes a robust framework for high-capacity wireless fronthaul, overcoming atmospheric attenuation and dynamic impairments. This approach highlights the viability of 16-QAM in next-generation ultra-high-speed networks (6G/7G), balancing high data rates with resilient performance under channel degradation. Full article

Free-space optical (FSO) communication is a promising high-capacity solution for future wireless networks, particularly for backhaul and fronthaul links in 5G and emerging 6G systems. However, it remains highly vulnerable to environmental impairment, especially in arid regions prone to dust storms. While prior studies have addressed atmospheric effects such as fog and turbulence, the specific impact of dust on signal performance remains insufficiently explored. This work presents a probabilistic modeling framework for evaluating the performance of an intensity modulation/direct detection (IM/DD) FSO system under dust storm conditions. Using a controlled laboratory environment, we conducted measurements of the optical signal under dust-induced channel conditions using real-world dust samples collected from an actual dust storm. We identified the Beta distribution as the most accurate model for the measured signal fluctuations. Closed-form expressions were derived for average bit error rate (BER), outage probability, and channel capacity. The close agreement between the analytical, approximate, and simulated results validates the proposed model as a reliable tool for evaluating FSO system performance. The results show that the forward error correction (FEC) BER threshold of ${10}^{-3}$ is achieved at approximately 10.5 dB, and the outage probability drops below ${10}^{-3}$ at 10 dB average SNR. Full article

Cell-free massive multiple-input multiple-output (mMIMO) technology utilizes collaborative signal processing to significantly improve system performance. In cell-free mMIMO systems, accurate channel state information (CSI) is a key element in improving the overall system performance. The existing statistical CSI acquisition methods for large-scale fading (LSF) processing schemes assume that each access points (APs) provides service to all user equipments (UEs) in the system. However, as the number of UEs or APs increases, the computational complexity of statistical CSI estimation tends to infinity, which is not scalable in large-scale networks. To address this limitation, this paper proposes a scalable statistical CSI estimation method under the user-centric cell-free mMIMO system, which blindly estimates the partial statistical CSI required for LSF schemes using uplink (UL) data signals. Additionally, the estimated partial statistical CSI can also be used for downlink (DL) LSF precoding (LSFP) or power control in fully distributed precoding. Simulation results show that under the LSFP scheme, the proposed method can achieve comparable spectral efficiency (SE) with the traditional CSI acquisition scheme while ensuring scalability. When applied to power control in fully distributed precoding, it significantly reduces the fronthaul link CSI overhead while maintaining a nearly similar SE performance compared to existing solutions. Full article

In future hybrid fiber and radio access networks, wavelength division multiplexing passive optical networks (WDM-PON) based fifth-generation (5G) fronthaul systems are anticipated to coexist with current protocols, potentially leading to non-linearity impairment due to stimulated Raman scattering (SRS). To meet the loss budget requirements of 5G fronthaul networks, this paper investigates the power changes induced by SRS in WDM-PON based 5G fronthaul systems. The study examines wavelength allocation schemes utilizing both the C-band and O-band, with modulation formats including non-return-to-zero (NRZ), optical double-binary (ODB), and four-level pulse amplitude modulation (PAM4). Simulation results indicate that SRS non-linearity impairment causes a power depletion of 1.3 dB in the 20 km C-band link scenario, regardless of whether the modulation formats are 25 Gb/s or 50 Gb/s NRZ, ODB, and PAM4, indicating that the SRS-induced power changes are largely independent of both modulation formats and modulation rates. This effect occurs when only the upstream and downstream wavelengths of the 5G fronthaul are broadcast. However, when the 5G fronthaul wavelengths coexist with previous protocols, the maximum power depletion increases significantly to 10.1 dB. In the O-band scenario, the SRS-induced maximum power depletion reaches 1.5 dB with NRZ, ODB, and PAM4 modulation formats at both 25 Gb/s and 50 Gb/s. Based on these analyses, the SRS non-linearity impairment shall be fully considered when planning the wavelengths for 5G fronthaul transmission. Full article

Modern cellular systems rely on high-capacity and low-latency optical networks to meet ever-increasing data demands. Centralized Radio Access Network (C-RAN) architectures offer a cost-effective approach for deploying mobile infrastructures. In this work, we propose a flexible and cost-efficient fronthaul topology that combines Wavelength Division Multiplexing (WDM) passive optical networks (PONs) with free-space optical (FSO) links. To enhance overall system performance, we introduce Low-Density Parity Check (LDPC) decoding, which provides robust error-correction capabilities against atmospheric turbulence and noise. Our system transmits 20 Gbps, 16-QAM intensity-modulated orthogonal frequency-division multiplexing (OFDM) signals, achieving a substantial reduction in bit error rate (BER). Numerical results show that the proposed WDM-PON-FSO architecture, augmented with LDPC decoding, maintains reliable transmission over 2 km under strong turbulence conditions. Full article

This research presents a novel approach to 28 $\mathrm{GHz}$ impulse radio ultra-wideband (IR-UWB) transmission using pulse position modulation (PPM) over an analog radio-over-fiber (ARoF) link, investigating the impact of fiber-based fronthaul on the overall performance of the communication system. In this setup, an arbitrary waveform generator (AWG) is employed for PPM signal generation, while demodulation is performed with a commercial time-to-digital converter (TDC) based on an event timer. To enhance the reliability of transmitted reference PPM (TR-PPM) signals, the transmission system integrates Gray coding and Consultative Committee for Space Data Systems (CCSDS)-standard-compliant Reed-Solomon (RS) error correcting code (ECC). System performance was evaluated by transmitting pseudorandom binary sequences (PRBSs) and measuring the bit error ratio (BER) across a 5-m wireless link between two 20 $\mathrm{d}\mathrm{B}\mathrm{i}$ gain horn (Ka-band) antennas, with and without a 20 $\mathrm{k}\mathrm{m}$ single-mode optical fiber (SMF) link in transmitter side and ECC at the receiver side. The system achieved a BER of less than 8.17 × 10⁻⁷, using a time bin duration of 200 $\mathrm{p}\mathrm{s}$ and a pulse duration of 100 $\mathrm{p}\mathrm{s}$, demonstrating robust performance and significant potential for space-to-ground telecommunication applications. Full article

In response to the urgent demands of the Internet of Things for precise indoor target positioning and information interaction, this paper proposes a multi-band analog radio-over-fiber mobile fronthaul system. The objective is to obtain the target’s location in indoor environments while integrating remote beamforming capabilities to achieve wireless access to the targets. Vector signals centered at 3, 4, 5, and 6 GHz for indoor positioning and centered at 30 GHz for wireless access are generated centrally in the distributed unit (DU) and fiber-distributed to the active antenna unit (AAU) in the multi-band analog radio-over-fiber mobile fronthaul system. Target positioning is achieved by radiating electromagnetic waves indoors through four omnidirectional antennas in conjunction with a pre-trained neural network, while high-speed wireless communication is realized through a phased array antenna (PAA) comprising four antenna elements. Remote beamforming for the PAA is implemented through the integration of an optical true time delay pool in the multi-band analog radio-over-fiber mobile fronthaul system. This integration decouples the weight control of beamforming from the AAU, enabling centralized control of beam direction at the DU and thereby reducing the complexity and cost of the AAU. Simulation results show that the average accuracy of localization classification can reach 86.92%, and six discrete beam directions are achieved via the optical true time delay pool. In the optical transmission layer, when the received optical power is 10 dBm, the error vector magnitudes (EVMs) of vector signals in all frequency bands remain below 3%. In the wireless transmission layer, two beam directions were selected for verification. Once the beam is aligned with the target device at maximum gain and the received signal is properly processed, the EVM of millimeter-wave vector signals remains below 11%. Full article

Conceptually, this paper aims to help reduce the communication blind spots originating from the design of millimeter-wave (mmW) beamforming by deploying radio units of an open radio access network (O-RAN) with free-space optics (FSOs) as the backhaul and the fiber-optic link as the fronthaul. At frequencies exceeding 24 GHz, the transmission reach of 5G/6G beamforming is limited to a few hundred meters, and the periphery area of the sector operational range of beamforming introduces a communication blind spot. Using FSOs as the backhaul and a fiber-optic link as the fronthaul, O-RAN empowers the radio unit to extend over greater distances to supplement the communication range that mmW beamforming cannot adequately cover. Notably, O-RAN is a prime example of next-generation wireless networks renowned for their adaptability and open architecture to enhance the cost-effectiveness of this integration. A 200 meter-long FSO link for backhaul and a fiber-optic link of up to 10 km for fronthaul were erected, thereby enabling the reach of communication services from urban centers to suburban and remote rural areas. Furthermore, in the context of beamforming, reinforcement learning (RL) was employed to optimize the error vector magnitude (EVM) by dynamically adjusting the beamforming phase based on the communication user’s location. In summary, the integration of RL-based mmW beamforming with the proposed O-RAN communication setup is operational. It lends scalability and cost-effectiveness to current and future communication infrastructures in urban, peri-urban, and rural areas. Full article

5G, the fifth-generation mobile network, is predicted to significantly increase the traditional trajectory of energy consumption. It now uses four times as much energy as 4G, the fourth-generation mobile network. As a result, compared to previous generations, 5G’s increased cell density makes energy efficiency a top priority. The objective of this paper is to formulate end-to-end power consumption models for three different 5G radio access network (RAN) deployment architectures, namely the 5G distributed RAN, the 5G centralized RAN with dedicated hardware and the 5G Cloud Centralized-RAN. The end-to-end modelling of the power consumption of a complete 5G system is obtained by combining the power models of individual components such as the base station, the core network, front-haul, mid-haul and backhaul links, as applicable for the different architectures. The authors considered the deployment of software-defined networking (SDN) at the 5G Core network and gigabit passive optical network as access technology for the backhaul network. This study examines the end-to-end power consumption of 5G networks across various architectures, focusing on key dependent parameters. The findings indicate that the 5G distributed RAN scenario has the highest power consumption among the three models evaluated. In comparison, the centralized 5G and 5G Cloud C-RAN scenarios consume 12% and 20% less power, respectively, than the Centralized RAN solution. Additionally, calculations reveal that base stations account for 74% to 78% of the total power consumption in 5G networks. These insights helped pioneer the calculation of the end-to-end power requirements of different 5G network architectures, forming a solid foundation for their sustainable implementation. Furthermore, this study lays the groundwork for extending power modeling to future 6G networks. Full article