Search Results (136)

The fraction of absorbed photosynthetically active radiation (FAPAR) stands as a pivotal parameter within the Earth system, quantifying the energy exchange between vegetation and solar radiation. Accordingly, there is an urgent need for comprehensive validation studies to accurately quantify uncertainties and improve the reliability of FAPAR-based applications. This study validated five global FAPAR products, MOD15A2H, MYD15A2H, VNP15A2H, GEOV2, and GEOV3, over four boreal forest sites in North America. Qualitative quality flags (QQFs) and quantitative quality indicators (QQIs) of each product were analyzed. Time series high-resolution reference FAPAR maps were developed using the Harmonized Landsat and Sentinel-2 dataset. The reference FAPAR maps revealed a strong agreement with the in situ FAPAR from AmeriFlux (correlation coefficient (R) = 0.91; root mean square error (RMSE) = 0.06). The results revealed that global FAPAR products show similar uncertainties (RMSE: 0.16 ± 0.04) and moderate agreement with the reference FAPAR (R = 0.75 ± 0.10). On average, 34.47 ± 6.91% of the FAPAR data met the goal requirements of the Global Climate Observing System (GCOS), while 54.41 ± 6.89% met the threshold requirements of the GCOS. Deciduous forests perform better than evergreen forests, and the products tend to underestimate the reference data, especially for the beginning and end of growing seasons in evergreen forests. There are no obvious quality differences at different QQFs, and the relative QQI can be used to filter high-quality values. To enhance the regional applicability of global FAPAR products, further algorithm improvements and expanded validation efforts are essential. Full article

Leaf phenology is key to ecosystem functioning by regulating carbon, water, and energy fluxes and influencing vegetation productivity. Yet, detecting land surface phenology (LSP) in drylands using remote sensing remains particularly challenging due to sparse and heterogeneous vegetation cover, high spatiotemporal variability, and complex spectral signals. Unlike the Northern Hemisphere, these challenges are further compounded in the Southern Hemisphere (SH), where several regions experience year-round moderate temperatures. When combined with irregular rainfall, this leads to highly variable vegetation activity throughout the year. However, LSP dynamics in the SH remain poorly understood. This study presents a review of remote sensing-based phenology research in drylands, integrating (i) a synthesis of global methodological advances and (ii) a systematic analysis of peer-reviewed studies published from 2015 through April 2025 focused on SH drylands. This review reveals a research landscape still dominated by conventional vegetation indices (e.g., NDVI) and moderate-spatial-resolution sensors (e.g., MODIS), though a gradual shift toward higher-resolution sensors such as PlanetScope and Sentinel-2 has emerged since 2020. Despite the widespread use of start- and end-of-season metrics, their accuracy varies greatly, especially in heterogeneous landscapes. Yet, advanced products such as solar-induced chlorophyll fluorescence or the fraction of absorbed photosynthetically active radiation were rarely employed. Gaps remain in the representation of hyperarid zones, grass- and shrub-dominated landscapes, and large regions of Africa and South America. Our findings highlight the need for multi-sensor approaches and expanded field validation to improve phenological assessments in dryland environments. The accurate differentiation of vegetation responses in LSP is essential not only for refining phenological metrics but also for enabling more realistic assessments of ecosystem functioning in the context of climate change and its impact on vegetation dynamics. Full article

Kazakhstan’s pasture, as a spatially extended agricultural resource for sustainable animal husbandry, requires effective monitoring with connected rational uses. Ranking number nine globally in terms of land size, Kazakhstan, with an area of about three million square km, requires proper assessment technologies for climate change and anthropogenic impact to track the pasture lands’ degradation. Remote sensing (RS)-based adaptive approaches for assessing pasture load, combined with field cross-checking of pastures, have been applied to evaluate the quality of vegetation cover, economic potential, service function, regenerative capacity, pasture productivity, and changes in plant species composition for five pilot regions in Kazakhstan. The current stages of these efforts are presented in this project report. The pasture lands in five regions, including Pavlodar (8,340,064 ha), North Kazakhstan (2,871,248 ha), Akmola (5,783,503 ha), Kostanay (11,762,318 ha), Karaganda (19,709,128 ha), and Ulytau (18,260,865 ha), were evaluated. Combined RS data were processed and the Normalized Difference Vegetation Index (NDVI), Leaf Area Index (LAI), Fraction of Vegetation Cover (FCover), Fraction of Absorbed Photosynthetically Active Radiation (FAPAR), Canopy Chlorophyll Content (CCC), and Canopy Water Content (CWC) indices were determined, in relation to the herbage of pastures and their growth and development, for field biophysical analysis. The highest values of LAI, FCOVER, and FARAR were recorded in the Akmola region, with index values of 18.5, 126.42, and 53.9, and the North Kazakhstan region, with index values of 17.89, 143.45, and 57.91, respectively. The massive 2024 spring floods, which occurred in the Akmola, North Kazakhstan, Kostanay, and Karaganda regions, caused many problems, particularly to civil constructions and buildings; however, these same floods had a very positive impact on pasture areas as they increased soil moisture. Further detailed investigations are ongoing to update the flood zones, wetlands, and swamp areas. The mapping of proper flood zones is required in Kazakhstan for pasture activities, rather than civil building construction. The related sustainable permissible grazing husbandry pasture loads are required to develop also. Recommendations for these preparation efforts are in the works. Full article

The homogeneous turbid medium assumption inherent to the Beer-Lambert’s law can lead to a reduction in the shading effect between leaves when non-green vegetation canopies are present, resulting in an overestimation of the fraction of absorbed photosynthetically active radiation (FAPAR). This paper proposed a method to improve the FAPAR estimation (FAPAR_FVC) based on Beer-Lambert’s law by incorporating fractional vegetation coverage (FVC). Initially, the canopy-scale leaf area index (LAI) of the green canopy distribution area within the pixel (sample site) was determined based on the FVC. Subsequently, the canopy-scale FAPAR was calculated within the green canopy distribution area, adhering to the assumption of a homogeneous turbid medium in the Beer-Lambert’s law. Finally, the average FAPAR across the pixel (sample site) was calculated based on the FVC. This paper conducted a case study using measured data from the BigFoot Project and grass savanna in Senegal, West Africa, as well as Moderate Resolution Imaging Spectroradiometer (MODIS) LAI/FPAR products. The results indicated that the FAPAR_FVC approach demonstrated superior accuracy compared to the FAPAR determined by MODIS LAI, according to the Beer-Lambert’s law (FAPAR_LAI) and MODIS FPAR products (FAPAR_MOD). The mean absolute percentage error of FAPAR_FVC was 48.2%, which is 25.6% and 52.1% lower than that of FAPAR_LAI and FAPAR_MOD, respectively. The mean percentage error of FAPAR_FVC was 16.8%, which was 71.6% and 73.4% lower than that of FAPAR_LAI and FAPAR_MOD, respectively. The improvements in accuracy and the decrease in overestimation for FAPAR_FVC became more pronounced with increasing FVC compared to FAPAR_LAI. The findings suggested that the FAPAR_FVC method enhanced the accuracy of FAPAR estimation under the presence of non-green vegetation canopies. The method can be extended to regional scale FAPAR and gross primary production (GPP) estimations, thereby providing more accurate inputs for understanding its tempo-spatial patterns and drivers. Full article

The goal of this study was to propose and validate a method for predicting cropland suitability based on biophysical variables and machine learning according to an FAO land suitability standard using soybean (Glycine max L.) as a representative crop, aiming to provide an alternative to geographic information system (GIS)-based multicriteria analysis. The peak leaf area index (LAI) and the fraction of absorbed photosynthetically active radiation (FAPAR) from PROBA-V/Sentinel-3 data were calculated according to ground-truth soybean agricultural parcels in continental Croatia during 2015–2021. Four machine learning regression algorithms, including random forest (RF), support vector machine (SVM), and extreme gradient boosting (XGB), as well as their combination, were evaluated for predicting the peak LAI and FAPAR on the entire agricultural land in the study area, with RF producing the highest prediction accuracy with an R² in the range of 0.250–0.590. The translation from K-means classes to the FAO land suitability standard was performed using a relative-based approach, ranking five resulting classes based on their relative mean sums of LAI and FAPAR values. The results of the proposed approach indicate that it is viable for major crops, while cropland suitability prediction for minor crops would require higher spatial resolution, such as vegetation indices from Sentinel-2 imagery. Full article

The fraction of absorbed photosynthetically active radiation (FAPAR) is one of the bio-geophysical Essential Climate Variables assessed through remote sensing observations and distributed globally by space and environmental agencies. Any reliable remote sensing product should be benchmarked against a reference, which is normally determined by means of ground-based measurements. They should generally be aggregated spatially to be compared with remote sensing products at different resolutions. In this work, the effectiveness of various in situ sampling methods proposed to assess FAPAR from flux measurements was evaluated using a three-dimensional radiative transfer framework over eight virtual vegetated landscapes, including dense forests (leaf-on and leaf-off models), open canopies, sparse vegetation, and agricultural fields with a nominal extension of 1 hectare. The reference FAPAR value was determined by summing the absorbed PAR-equivalent photons by either all canopy components, both branches and leaves, or by only the leaves. The incoming and upwelling PAR fluxes were simulated in different illumination conditions and at a high spatial resolution (50 cm). They served to replicate in situ virtual FAPAR measurements, which were carried out using either stationary sensor networks or transects. The focus was on examining the inherent advantages and drawbacks of in situ measurement protocols against GCOS requirements. Consequently, the proficiency of each sampling technique in reflecting the distribution of incident and reflected PAR fluxes—essential for calculating FAPAR—was assessed. This study aims to support activities related to the validation of remote sensing FAPAR products by assessing the potential uncertainty associated with in situ determination of the reference values. Among the sampling schemes considered in our work, the cross shaped sampling schemes showed a particular efficiency in properly representing the pixel scale FAPAR over most of the scenario considered. Full article

Radiative transfer models (RTMs) are often used to retrieve biophysical parameters from earth observation data. RTMs with multi-temporal and realistic forest representations enable radiative transfer (RT) modeling for real-world dynamic processes. To achieve more realistic RT modeling for dynamic forest processes, this study presents the 3D-explicit reconstruction of a typical temperate deciduous forest in 2015 and 2022. We demonstrate for the first time the potential use of bitemporal 3D-explicit RT modeling from terrestrial laser scanning on the forward modeling and quantitative interpretation of: (1) remote sensing (RS) observations of leaf area index (LAI), fraction of absorbed photosynthetically active radiation (FAPAR), and canopy light extinction, and (2) the impact of canopy gap dynamics on light availability of explicit locations. Results showed that, compared to the 2015 scene, the hemispherical-directional reflectance factor (HDRF) of the 2022 forest scene relatively decreased by 3.8% and the leaf FAPAR relatively increased by 5.4%. At explicit locations where canopy gaps significantly changed between the 2015 scene and the 2022 scene, only under diffuse light did the branch damage and closing gap significantly impact ground light availability. This study provides the first bitemporal RT comparison based on the 3D RT modeling, which uses one of the most realistic bitemporal forest scenes as the structural input. This bitemporal 3D-explicit forest RT modeling allows spatially explicit modeling over time under fully controlled experimental conditions in one of the most realistic virtual environments, thus delivering a powerful tool for studying canopy light regimes as impacted by dynamics in forest structure and developing RS inversion schemes on forest structural changes. Full article

Vegetation phenology serves as a sensitive indicator of climate change. However, the mechanism of the hydrothermal role in vegetation phenology changes is still controversial. Utilizing the data on the Fraction of Absorbed Photosynthetically Active Radiation (FPAR) from MODIS and meteorological data, the study employed the dynamic threshold method to derive the end of the growing season (EOS). The research delved into the spatiotemporal patterns of the EOS for typical steppe vegetation in the semi-arid region of Inner Mongolia spanning the period from 2003 to 2022. Furthermore, the investigation scrutinized the response of EOS to temperature and precipitation dynamics. The results showed that (1) the dynamic threshold method exhibited robust performance in the EOS of typical steppe vegetation, with an optimal threshold of 45% and a Root Mean Square Error (RMSE) of 5.5 days (r = 0.81); (2) the spatiotemporal patterns of the EOS of typical steppe vegetation in the semi-arid region experienced a noteworthy reversal from 2003 to 2022; (3) the lag effects of precipitation and temperature on the EOS were found, and the lag time scales were mainly 1 month and 2 months. The increase in precipitation in August was the key reason for the reversal of the EOS, and satisfying the precipitation was a prerequisite for the temperature to delay the EOS. The study emphasizes the important role of water availability in regulating the response of the EOS to hydrothermal factors and highlights the utility and reliability of FPAR in monitoring the EOS of typical steppe vegetation. Full article

A range of remote sensing platforms provide high spatial and temporal resolution insights which are useful for monitoring vegetation growth. Very few studies have focused on fruit orchards, largely due to the inherent complexity of their structure. Fruit trees are mixed with inter-rows that can be grassed or non-grassed, and there are no standard protocols for ground measurements suitable for the range of crops. The assessment of biophysical variables (BVs) for fruit orchards from optical satellites remains a significant challenge. The objectives of this study are as follows: (1) to address the challenges of extracting and better interpreting biophysical variables from optical data by proposing new ground measurements protocols tailored to various orchards with differing inter-row management practices, (2) to quantify the impact of the inter-row at the Sentinel pixel scale, and (3) to evaluate the potential of Sentinel 2 data on BVs for orchard development monitoring and the detection of key phenological stages, such as the flowering and fruit set stages. Several orchards in two pedo-climatic zones in southeast France were monitored for three years: four apricot and nectarine orchards under different management systems and nine cherry orchards with differing tree densities and inter-row surfaces. We provide the first comparison of three established ground-based methods of assessing BVs in orchards: (1) hemispherical photographs, (2) a ceptometer, and (3) the Viticanopy smartphone app. The major phenological stages, from budburst to fruit growth, were also determined by in situ annotations on the same fields monitored using Viticanopy. In parallel, Sentinel 2 images from the two study sites were processed using a Biophysical Variable Neural Network (BVNET) model to extract the main BVs, including the leaf area index (LAI), fraction of absorbed photosynthetically active radiation (FAPAR), and fraction of green vegetation cover (FCOVER). The temporal dynamics of the normalised FAPAR were analysed, enabling the detection of the fruit set stage. A new aggregative model was applied to data from hemispherical photographs taken under trees and within inter-rows, enabling us to quantify the impact of the inter-row at the Sentinel 2 pixel scale. The resulting value compared to BVs computed from Sentinel 2 gave statistically significant correlations (0.57 for FCOVER and 0.45 for FAPAR, with respective RMSE values of 0.12 and 0.11). Viticanopy appears promising for assessing the PAI (plant area index) and FCOVER for orchards with grassed inter-rows, showing significant correlations with the Sentinel 2 LAI (R² of 0.72, RMSE 0.41) and FCOVER (R² 0.66 and RMSE 0.08). Overall, our results suggest that Sentinel 2 imagery can support orchard monitoring via indicators of development and inter-row management, offering data that are useful to quantify production and enhance resource management. Full article

Red solar-induced chlorophyll fluorescence (SIF_B) is closely related to the photosynthetically active radiation absorbed by chlorophyll. The scattering and reabsorption of SIF_B by the vegetation canopy significantly change the spectral intensity and shape of SIF, which affects the relationship between SIF and crop stress. To address this, we propose a method of modifying SIF_B using SIF spectral shape characteristic parameters to reduce this influence. A red pseudokurtosis (PK_B) parameter that can characterize spectral shape features was calculated using full-spectrum SIF data. On this basis, we analyzed the photosynthetic physiological mechanism of PK_B and found that it significantly correlates with both the fraction of photosynthetically active radiation absorbed by chlorophyll(fPAR_chl) and the red SIF escape rate (fesc680); thus, it is closely related to the scattering and reabsorption of SIF_B by the vegetation canopy. Consequently, we constructed an expression of PK_B to modify SIF_B. To evaluate the modified SIF_B (MSIF_B) in monitoring the severity of wheat stripe rust, we analyzed the correlations between SIF_B, MSIF_B, SIF_B-VIs (a fusion of the vegetation index and SIF_B), and MSIF_B-VIs (a fusion of the vegetation index and MSIF_B) with the severity level (SL), respectively. The results show that the correlation between MSIF_B and the severity of wheat stripe rust increased by an average of 25.6% and at least 16.95% compared with that for SIF_B. In addition, we constructed remote sensing monitoring models for wheat stripe rust using linear regression methods, with SIF_B, MSIF_B, SIF_B-VIs, and MSIF_B-VIs as independent variables. PK_B significantly improves the accuracy and robustness of models based on SIF_B and its fusion index SIF_B-VIs in the constructed testing set. The R-value between the predicted SL and the measured SL of the remote sensing monitoring model for wheat stripe rust was established using MSIF_B-VIs as the independent variable, and it was improved by an average of 39.49% compared with the model using SIF_B-VIs. The RMSE was reduced by an average of 18.22%. Therefore, the SIF_B modified by PK_B can weaken the effects of chlorophyll reabsorption and canopy architecture on SIF_B and improve the ability of SIF_B to detect stress information. Full article

This article presents validation and conformity testing of the Sentinel-3 Ocean Land Colour Instrument (OLCI) green instantaneous fraction of absorbed photosynthetically active radiation (FAPAR) and OLCI terrestrial chlorophyll index (OTCI) canopy chlorophyll content (CCC) products with fiducial reference measurements (FRM) collected in 2018 and 2021 over two sites (Las Tiesas—Barrax, Spain, and Wytham Woods, UK) in the context of the European Space Agency (ESA) Fiducial Reference Measurement for Vegetation (FRM4Veg) initiative. Following metrological principles, an end-to-end uncertainty evaluation framework developed in the project is used to account for the uncertainty of reference data based on a two-stage validation approach. The process involves quantifying uncertainties at the elementary sampling unit (ESU) level and incorporating these uncertainties in the upscaling procedures using orthogonal distance regression (ODR) between FRM and vegetation indices derived from Sentinel-2 data. Uncertainties in the Sentinel-2 data are also accounted for. FRM-based high spatial resolution reference maps and their uncertainties were aggregated to OLCI’s native spatial resolution using its apparent point spread function (PSF). The Sentinel-3 mission requirements, which give an uncertainty of 5% (goal) and 10% (threshold), were considered for conformity testing. GIFAPAR validation results revealed correlations > 0.95, RMSD ~0.1, and a slight negative bias (~−0.06) for both sites. This bias could be partly explained by the differences in the FAPAR definitions between the satellite product and the FRM-based reference. For the OTCI-based CCC, leave-one-out cross-validation demonstrated correlations > 0.8 and RMSDcv ~0.28 g·m⁻². Despite the encouraging validation results, conclusive conformity with the strict mission requirements was low, with most cases providing inconclusive results (driven by large uncertainties in the satellite products as well as by the uncertainties in the upscaling approach). It is recommended that mission requirements for bio-geophysical products are reviewed, at least at the threshold level. It is also suggested that the large uncertainties associated with the two-stage validation approach may be avoided by directly comparing with spatially representative FRM. Full article

Doñana National Park is located in the southwest of the Iberian Peninsula, where water scarcity is recurrent, together with a high heterogeneity in species and ecosystems. Monitoring carbon assimilation is essential to improve knowledge of global change in natural vegetation cover. In this work, a light use efficiency (LUE) model was applied to estimate gross primary production (GPP) in two ecosystems of Doñana, xeric shrub (drought resistant) and seasonal marsh (with grasslands dependent on water hydroperiod) and validated with in situ data from eddy covariance (EC) towers installed in both ecosystems. The model was applied in two ways: (1) using the fraction of absorbed photosynthetically active radiation (FAPAR) from Sentinel-2 and meteorological data from reanalysis (ERA5), and (2) using Sentinel-2 FAPAR, reanalysis solar radiation (ERA5) and the Sentinel-2 land surface water index (LSWI). In both cases and for both ecosystems, the error values are acceptable (below 1 gC/m²) and in both ecosystems the model using the LSWI gave better results (R² of 0.8 in marshes and 0.51 in xeric shrubs). The results also show a greater influence of the water status of the system than of the meteorological variables in this area. Full article

This study explores the quantitative relationship between canopy structure and the canopy escape ratio (f_esc), measured as the ratio of near-infrared reflectance of vegetation (NIRv) to the fraction of absorbed photosynthetically active radiation (fAPAR). We analyzed the correlation between f_esc and key indicators of canopy structure—specifically, leaf area index (LAI) and clumping index (CI)—utilizing both Sentinel-2 satellite data and in situ observations. Our analysis revealed a moderate correlation between f_esc and LAI, evidenced by an R² value of 0.37 for satellite-derived LAI, which contrasts with the lower correlation (R² of 0.15) observed with field-measured LAI. Conversely, the relationship between f_esc and CI proved to be significantly weaker (R² < 0.1), indicating minimal interaction between foliage distribution and light escape at the canopy level. This disparity in correlation strength was further evidenced in time series analysis, which showed little phenological variation in f_esc compared to LAI. Our findings elucidate the complexities of estimating f_esc based on the NIRv to fAPAR ratio and underscore the need for advanced methodologies in future research to enhance the accuracy of canopy escape models. Full article

The continuous monitoring of the terrestrial Earth system by a growing number of optical satellite missions provides valuable insights into vegetation and cropland characteristics. Satellite missions typically provide different levels of data, such as level 1 top-of-atmosphere (TOA) radiance and level 2 bottom-of-atmosphere (BOA) reflectance products. Exploiting TOA radiance data directly offers the advantage of bypassing the complex atmospheric correction step, where errors can propagate and compromise the subsequent retrieval process. Therefore, the objective of our study was to develop models capable of retrieving vegetation traits directly from TOA radiance data from imaging spectroscopy satellite missions. To achieve this, we constructed hybrid models based on radiative transfer model (RTM) simulated data, thereby employing the vegetation SCOPE RTM coupled with the atmosphere LibRadtran RTM in conjunction with Gaussian process regression (GPR). The retrieval evaluation focused on vegetation canopy traits, including the leaf area index (LAI), canopy chlorophyll content (CCC), canopy water content (CWC), the fraction of absorbed photosynthetically active radiation (FAPAR), and the fraction of vegetation cover (FVC). Employing band settings from the upcoming Copernicus Hyperspectral Imaging Mission (CHIME), two types of hybrid GPR models were assessed: (1) one trained at level 1 (L1) using TOA radiance data and (2) one trained at level 2 (L2) using BOA reflectance data. Both the TOA- and BOA-based GPR models were validated against in situ data with corresponding hyperspectral data obtained from field campaigns. The TOA-based hybrid GPR models revealed a range of performance from moderate to optimal results, thus reaching $R^2$ = 0.92 (LAI), $R^2$ = 0.72 (CCC) and 0.68 (CWC), $R^2$ = 0.94 (FAPAR), and $R^2$ = 0.95 (FVC). To demonstrate the models’ applicability, the TOA- and BOA-based GPR models were subsequently applied to imagery from the scientific precursor missions PRISMA and EnMAP. The resulting trait maps showed sufficient consistency between the TOA- and BOA-based models, with relative errors between $4\%$ and $16\%$ ($R^2$ between 0.68 and 0.97). Altogether, these findings illuminate the path for the development and enhancement of machine learning hybrid models for the estimation of vegetation traits directly tailored at the TOA level. Full article

Monitoring vegetation dynamics (VD) is crucial for environmental protection, climate change research, and understanding carbon and water cycles. Remote sensing is an effective method for large-scale and long-term VD monitoring, but it faces challenges due to changing data uncertainties caused by various factors, including observational conditions. Previous studies have demonstrated the significance of implementing proper quality control (QC) of remote sensing data for accurate vegetation monitoring. However, the impact of different QC methods on VD results (magnitude and trend) has not been thoroughly studied. The fraction of absorbed photosynthetically active radiation (FPAR) characterizes the energy absorption capacity of the vegetation canopy and is widely used in VD monitoring. In this study, we investigated the effect of QC methods on vegetation monitoring using a 20-year MODIS FPAR time series. The results showed several important findings. Firstly, we observed that the Mixed-QC (no QC on the algorithm path) generally produced a lower average FPAR during the growing season compared to Main-QC (only using the main algorithm). Additionally, the Mixed-QC FPAR showed a very consistent interannual trend with the Main-QC FPAR over the period 2002–2021 (p < 0.05). Finally, we found that using only the main algorithm for QC generally reduced the trend magnitude (p < 0.1), particularly in forests. These results reveal differences in FPAR values between the two QC methods. However, the interannual FPAR trends demonstrate greater consistency. In conclusion, this study offers a case study on evaluating the influence of different QC methods on VD monitoring. It suggests that while different QC methods may result in different magnitudes of vegetation dynamics, their impact on the time series trends is limited. Full article