Search Results (8)

Fluorescent brighteners (FBs) are a class of chemicals extensively used in industrial and consumer products. Their environmental occurrences and potential health risks have raised significant concerns. However, the lack of analytical methods for FBs in human samples has hindered the accurate assessment of internal exposure levels. Addressing this gap, this study developed and validated a novel method for the simultaneous determination of 13 FBs at trace levels in human plasma using solid-phase extraction combined with HPLC-MS/MS. The method employed EMR-Lipid SPE columns, which can selectively adsorb phospholipids for plasma sample pre-treatment. Detection was achieved through positive ion electrospray ionization (ESI) in multiple reaction monitoring (MRM) modes. The results showed that all 13 FBs exhibited good linearity within their respective ranges, with correlation coefficients (R²) greater than 0.992. The method quantitation limits (MQLs) of the FBs ranged from 0.012 to 0.348 ng/mL, and the spiked recovery rates ranged from 61% to 98%. The method was successfully applied to analyze 10 adult plasma samples, detecting 10 FBs with total concentrations ranging from 0.221 to 0.684 ng/mL. This study provides a reliable analytical method for determining FBs in human plasma, providing a basis for further research on human internal exposure to FBs and associated health risk assessments. Full article

The application of hops could be extended to obtain higher commercial values. Tannins from hops were assessed for their tyrosinase inhibition ability, and the associated mechanisms were explored. Nuclear magnetic resonance (NMR) and high-performance liquid chromatography–electrospray ionization–tandem mass spectrometry (HPLC–ESI–MS/MS) revealed that the hop tannins were characterized as condensed tannins with (epi)catechin and (epi)gallocatechin as subunits and an average polymerization degree of 10.32. Tyrosinase inhibition assay indicated that hop tannins had an IC₅₀ = 76.52 ± 6.56 μM. Kinetic studies of the inhibition processes indicated the tannins provided inhibition through competitive–uncompetitive mixed reactions. In silico molecule docking showed that tannins were bound to the active site of tyrosinase via hydrogen and electrovalent bonds. Circular dichroism (CD) observed the structural variation in the tyrosinase after reacting with the tannins. Fluorescence quenching analysis and free radical scavenging assays indicated that the tannins had copper ion chelating and antioxidant activities, which may also contribute to inhibition. The intracellular inhibition assay revealed that the melanin was reduced by 34.50% in B16F10 cells. These results indicate that these tannins can be applied as whitening agents in the cosmetics industry. Full article

Paper recycling is the most eco-efficient waste management option, since the use of recycled fibers reduces the need for virgin wood fiber and lowers energy consumption, and hence has a positive effect on the environment. The use of recycled paper is by far the highest in the packaging industry. In food packaging production, recycled paper is often favored over paper and board made from virgin fibers. However, due to the possible hazardous chemicals that can be found in recycled paper, there is a dilemma of how to overcome food safety issues while making food packaging more circular. The objective of the study was to determine if deinked office paper grades could be used as an alternative fiber source in the production of food packaging white top linerboards. For that purpose, three different types of digitally printed papers were submitted to a chemical deinking flotation in laboratory conditions, and the handsheets formed after each recycling trial were tested on the suitability for direct food contact. Evaluation of deinkability for each group of recycled prints was performed, as well. Deinkability was evaluated by calculating the flotation yield, pulp’s brightness and whiteness increase, ink elimination factor, determination of residual ink area, as well as ash content elimination. Food safety evaluation was performed by determining the content of heavy metals (Cd, Pb, Hg, and Cr VI), primary aromatic amines, diisopropylnaphthalenes (DIPN), phthalates, and polychlorinated biphenyls (PCB) from aqueous or organic solvent extracts of recycled paper pulp. The fastness of the fluorescent whitening agents was determined, as well. Of all evaluated deinking flotation efficiency parameters, only flotation yield and ash reduction by flotation were positively assessed. High content of residual ink particles detected after the flotation stage indicates that the flotation was not a successful method for the elimination of disintegrated ink particles, which was also confirmed by deficient results of ink elimination measurements and whiteness increase. Flotation proved to be the least efficient in the recycling of inkjet prints, where the lowest ink elimination, whiteness, and brightness values were achieved. As far as food safety assessment of deinked pulp is concerned, all tested deinked handsheets were found suitable to be used in direct contact with foods. Full article

The hop is rich in tannins used as a conventional additive in the beer industry, but other applications are limited. This study investigated the tyrosinase inhibition activity of extracted hop tannins and the associated structure–function activity. The tannins were extracted and subjected to a gel permeation chromatography (GPC), a nuclear magnetic resonance (NMR) and an acid-cleavage coupled HPLC-ESI-MS/MS analysis to obtain the structural information of the tannins. Then, tyrosinase inhibition kinetic assays, inductively coupled plasma optical emission spectrometer and antioxidant (ICP-OES), circular dichroism (CD) as well as molecular docking analysis were applied to investigate the inhibition mechanism. Furthermore, the intracellular inhibition ability of hop tannins was assessed with B16-F10 cells. The results indicated that hop tannins were composed of (epi)catechin as extensional units and (epi)gallocatechin as terminal units and can be classified as prodelphenidins. The tyrosinase inhibition assays showed the hop tannin had a IC₅₀ = 76.52 ± 6.56 µM, meanwhile it inhibited the tyrosinase through a competitive–noncompetitive mixed way. The tannins were found to bind on the surface of tyrosinase via forming hydrogen bonding and consequently changed the secondary structure of tyrosinase. The fluorescence and antioxidant assay indicated the tannin had both copper ion chelating and antioxidant ability, which may also contribute to the inhibition. The intracellular inhibition analysis showed that activity of tyrosinase was reduced by 66.67% and melanin production was found to be reduced by 34.50% while 10 µM hop tannins were applied. These results indicated that the hops are not only important in the beer industry, but that hop tannins can be also applied as whitening agents in the cosmetic industry. Full article

In this study, paper-mill wastewater was treated using the Submerged Membrane Bioreactor (SMBR) process. In particular, the ozone oxidation treatment process is applied after SMBR to remove the fluorescent whitening agent, which is a trace pollutant and non-biodegradable. Fluorescent whitening agent concentration was indirectly measured by UV scanning and COD concentration. The concentration of COD before SMBR and ozone oxidation was 449.3 mg/L, and the concentration of treated water was 100.3 mg/ℓ. The COD removal efficiency of paper-mill wastewater through SMBR and the ozone oxidation process was about 77.68%. The optimized amount of ozone was required for the removal of the fluorescent whitening agent after SMBR was 95 mg·O₃/ℓ calculated by UV scan results. Additionally, the optimized amount of required ozone to remove COD was calculated to 0.126 mg·COD/mg·O₃. Full article

In this study, we have synthesized new double layered hydroxides to be incorporated to low density polyethylene thermoplastic matrix. These new composites present promising applications as materials to build greenhouses due to the enhancement of their optical properties. A characterization of the modified nanoclay has been performed by means of X-ray fluorescence (XRF), X-ray Diffraction (XRD), Thermogravimetric analysis (TGA), and Fourier-transform infrared spectroscopy (FTIR). We have prepared a series of polyolefin-based films to evaluate the effect of the addition of a whitening agent (disodium 2,2′-((1,1′-biphenyl)-4,4′-diyldivinylene)bis(benzenesulfonate)), the modified hydrotalcite-like material and a commercial dispersant. The rheological and mechanical characterization of the films have proved that the inclusion of the modified-layered double hydroxides (LDHs) do not substantially affect the processing and mechanical performance of the material. On the other hand, optical properties of the nanocomposites are improved by reducing the transmission in the UVA region. Full article

There has been increasing research focus on the detection and occurrence of wastewater contamination in aquatic environment. Wastewater treatment plants receive effluents containing various chemical pollutants. These chemicals may not be fully removed during treatment and could potentially enter the receiving water bodies. Detection of these chemical pollutants and source identification could be a challenging research task due to the diversified chemical and functional groups, concentration levels and fate and transportation mechanisms of these pollutants in the environment. Chemical markers such as pharmaceuticals and personal care products, artificial sweeteners, fluorescent whitening agents, sterols and stanols, and nitrate and nitrogen isotopics have been widely used by most research as markers. These markers served as indicators of wastewater contamination to the receiving bodies due to their frequent usage, resistance to biodegradability and, more importantly, anthropogenic origin. These markers are commonly used in combination to identify the contaminant source of different origins. This article discusses the main chemical markers that are used to identify wastewater contamination in receiving bodies, the current trends, and approach to select suitable chemical markers. Full article

Real-time monitoring of water quality for sewer system is required for efficient sewer network design because it provides information on the precise loading of pollutant to wastewater treatment facilities and the impact of loading on receiving water. In this study, synchronous fluorescence spectra and its first derivatives were investigated using a number of wastewater samples collected in sewer systems in urban and non-urban areas, and the optimum fluorescence feature was explored for the estimation of biochemical oxygen demand (BOD) and chemical oxygen demand (COD) concentrations of sewer samples. The temporal variations in BOD and COD showed a regular pattern for urban areas whereas they were relatively irregular for non-urban areas. Irrespective of the sewer pipes and the types of the areas, two distinct peaks were identified from the synchronous fluorescence spectra, which correspond to protein-like fluorescence (PLF) and humic-like fluorescence (HLF), respectively. HLF in sewer samples appears to be associated with fluorescent whitening agents. Five fluorescence characteristics were selected from the synchronous spectra and the first-derivatives. Among the selected fluorescence indices, a peak in the PLF region (i.e., Index I) showed the highest correlation coefficient with both BOD and COD. A multiple regression approach based on suspended solid (SS) and Index I used to compensate for the contribution of SS to BOD and COD revealed an improvement in the estimation capability, showing good correlation coefficients of 0.92 and 0.94 for BOD and COD, respectively. Full article