Search Results (951)

The background for this study is the limitations of the conventional approach of using deforestation area multiplied by biomass densities or emission factors. We demonstrated how TanDEM-X and GEDI data can be combined to estimate forest Above Ground Biomass (AGB) change at the national scale for Tanzania. The results can be further recalculated to estimate CO₂ emissions and removals from the forest. We used repeated short wavelength, InSAR DEMs from TanDEM-X to derive changes in forest canopy height and combined this with GEDI data to convert such height changes to AGB changes. We estimated AGB change during 2012–2019 to be −2.96 ± 2.44 MT per year. This result cannot be validated, because the true value is unknown. However, we corroborated the results by comparing with other approaches, other datasets, and the results of other studies. In conclusion, TanDEM-X and GEDI can be combined to derive reliable temporal change in AGB at large scales such as a country. An important advantage of the method is that it is not required to have a representative field inventory plot network nor a full coverage DTM. A limitation for applying this method now is the lack of frequent and systematic InSAR elevation data. Full article

Accurate estimation of individual tree stem volume is essential for forest resource assessment and the implementation of sustainable forest management. In South Korea, traditional regression models based on non-destructive and easily measurable field variables such as diameter at breast height (DBH) and total height (TH) have been widely used to construct stem volume tables. However, these models often fail to adequately capture the nonlinear taper of tree stems. In this study, we evaluated and compared the predictive performance of traditional regression models and two machine learning algorithms—Random Forest (RF) and Extreme Gradient Boosting (XGBoost)—using stem profile data from 1000 destructively sampled Chamaecyparis obtusa trees collected across 318 sites nationwide. To ensure compatibility with existing national stem volume tables, all models used only DBH and TH as input variables. The results showed that all three models achieved high predictive accuracy (R² > 0.997), with XGBoost yielding the lowest RMSE (0.0164 m³) and MAE (0.0126 m³). Although differences in performance among the models were marginal, the machine learning approaches demonstrated flexible and generalizable alternatives to conventional models, providing a practical foundation for large-scale forest inventory and the advancement of digital forest management systems. Full article

Data analysis and machine learning have become essential cross-disciplinary skills for engineering students and professionals. Traditionally, these topics are taught through lectures or online courses using pre-existing datasets, which limits the opportunity to engage with the full cycle of data analysis and machine learning, including data collection, preparation, and contextualization of the application field. To address this, we designed and implemented a learning activity that involves students in every step of the learning process. This activity includes multiple stages where students conduct experiments to record their own electroencephalographic (EEG) signals and use these signals to learn data analysis and machine learning techniques. The purpose is to actively involve students, making them active participants in their learning process. This activity was implemented in six courses across four engineering careers during the 2023 and 2024 academic years. To validate its effectiveness, we measured improvements in grades and self-reported motivation using the MUSIC model inventory. The results indicate a positive development of competencies and high levels of motivation and appreciation among students for the concepts of data analysis and machine learning. Full article

Brain-derived neurotrophic factor (BDNF) is associated with nicotine use behaviours, the intensity of nicotine cravings, and the experience of withdrawal symptoms. Given the established influence of sex, brain-derived neurotrophic factor variants, personality traits and anxiety levels on nicotine use, this study aimed to conduct a comprehensive association analysis of these factors within a cohort of women who use nicotine. The study included 239 female participants: 112 cigarette users (mean age = 29.19, SD = 13.18) and 127 never-smokers (mean age = 28.1, SD =10.65). Study participants were examined using the NEO Five-Factor Inventory and the State–Trait Anxiety Inventory. Genotyping of rs6265, rs10767664, and rs2030323 was performed by real-time PCR using an oligonucleotide assay. We did not observe significant differences in the distribution of either genotype or allele of rs6265, rs10767664 and rs2030323 between groups. However, compared to the never-smokers, cigarette users scored significantly lower on the Agreeableness (5.446 vs. 6.315; p = 0.005767; d_Cohen’s = 0.363; η² = 0.032) and the Conscientiousness (5.571 vs. 6.882; p = 0.000012; d_Cohen’s = 0.591; η²= 0.08) scales. There was significant linkage disequilibrium between all three analysed polymorphic variants—between rs6265 and rs10767664 (D′ = 0.9994962; p < 2.2204 × 10⁻¹⁶), between rs6265 and rs2030323 (D′ = 0.9994935; p < 2.2204 × 10⁻¹⁶) and between rs10767664 and rs20330323 (D′ = 0.9838157; p < 2.2204 × 10⁻¹⁶), but the haplotype association analysis revealed no significant differences. While our study did not reveal an association between the investigated brain-derived neurotrophic factor polymorphisms (rs6265, rs10767664 and rs2030323) and nicotine use, it is essential to acknowledge that nicotine dependence is a complex, multifactorial phenotype. Our study expands the current knowledge of BDNF ’s potential role in addictive behaviours by exploring the understudied variants (rs10767664 and rs2030323), offering a novel contribution to the field and paving the way for future research into their functional relevance in addiction-related phenotypes. The lower Agreeableness and Conscientiousness scores observed in women who use nicotine compared to never-smokers suggest that personality traits play a significant role in nicotine use in women. The observed relationship between personality traits and nicotine use lends support to the self-medication hypothesis, suggesting that some women may initiate or maintain nicotine use as a coping mechanism for stress and negative affect. Public health initiatives targeting women should consider personality and psychological risk factors in addition to biological risks. Full article

Biogenic volatile organic compounds (BVOCs) are low-boiling-point compounds commonly synthesized by secondary metabolic pathways in plants. As key precursors of ozone (O₃) and secondary organic aerosols (SOA), BVOCs play a critical role in ecosystem-atmosphere interactions. However, their emission from both marine and terrestrial ecosystems, as well as their association with climate and the environment, remain poorly characterized. In light of recent advances in BVOC research, including the establishment of emission inventories, identification of driving factors, and evaluation of ecological and environmental impacts, this study reviews the latest advancements in the field. The findings underscore that the carbon losses via BVOC emission should not be overlooked when estimating the terrestrial carbon balance. Additionally, more work needs to be conducted to quantify the emission factors of specific tree species and to establish links between BVOC emission and climate or environment change. This study contributes to a deeper understanding of vegetation ecology and its environmental functions. Full article

Stylistic neutrality is the basis for the stylistic evaluation of maps. Furthermore, the stylistic neutrality of a map as a cartographic text may be related to objectivity. However, what constitutes stylistic neutrality is not clearly stated in the field of cartography. The problem is complicated by the fact that the stylistically neutral image is a hypothetical image. The aim of this research is to investigate stylistic neutrality by exploring the peculiarities of cartographic language functioning in different fields of social activity. The research combines descriptive analysis, stylistic analysis, cartographic and interpretative methods. Firstly, the research reveals the concept of cartographic stylistic neutrality, in line with the cartographic linguistic paradigm. Secondly, an analysis of the characteristics of cartographic language in different fields of social activity from the point of view of stylistic neutrality is carried out. Thirdly, an example is developed to illustrate stylistic cartographic neutrality. Stylistic neutrality is characterised by the stylistic features of cartographic language: clarity, accuracy, conciseness, calmness, abstractness, temperance, neutrality and moderateness. The style of cartographic production for inventory and research activities is closest to stylistic neutrality, while the style of reflective activity is the most expressive and acts as a source of concreteness for stylistic neutrality. Full article

Morphological problems for distinguishing between glacier ice, glacier ice with a debris cover (debris-covered glaciers), and rock glaciers are outlined with respect to recognising and mapping these features. Decimal latitude–longitude [dLL] values are used for geolocation. One model for rock glacier formation and flow discusses the idea that they consist of ‘mountain permafrost’. However, signs of permafrost-derived ice, such as flow features, have not been identified in these landsystems; talus slopes in the neighbourhoods of glaciers and rock glaciers. An alternative view, whereby rock glaciers are derived from glacier ice rather than permafrost, is demonstrated with examples from various locations in the mountain domain, 𝔻𝕞. A Google Earth and field examination of many rock glaciers shows glacier ice exposed below a rock debris mantle. Ice exposure sites provide ground truth for observations and interpretations stating that rock glaciers are indeed formed from glacier ice. Exposure sites include bare ice at the headwalls of cirques and above debris-covered glaciers; additionally, ice cliffs on the sides of meltwater pools are visible at various locations along the lengths of rock glaciers. Inspection using Google Earth shows that these pools can be traced downslope and their sizes can be monitored between images. Meltwater pools occur in rock glaciers that have been previously identified in inventories as being indictive of permafrost in the mountain domain. Glaciers with a thick rock debris cover exhibit ‘hidden ice’ and are shown to be geomorphological units mapped as rock glaciers. Full article

Accurate biomass estimation is important for forest management and climate change mitigation. This study evaluates the potential of using LiDAR (Light Detection and Ranging) data, acquired through Unmanned Aerial Vehicles (UAVs), for estimating above-ground and total biomass in Eucalyptus globulus and Pinus pinaster stands in central and northern Portugal. The acquired LiDAR point clouds were processed to extract structural metrics such as canopy height, crown area, canopy density, and volume. A multistep variable selection procedure was applied to reduce collinearity and select the most informative predictors. Multiple linear regression (MLR) models were developed and validated using field inventory data. Random Forest (RF) models were also tested for E. globulus, enabling a comparative evaluation between parametric and machine learning regression models. The results show that the 25th height percentile, canopy cover density at two meters, and height variance demonstrated an accurate biomass estimation for E. globulus, with coefficients of determination (R²) varying between 0.86 for MLR and 0.90 for RF. Although RF demonstrated a similar predictive performance, MLR presented advantages in terms of interpretability and computational efficiency. For P. pinaster, only MLR was applied due to the limited number of field data, yet R² exceeded 0.80. Although absolute errors were higher for Pinus pinaster due to greater biomass variability, relative performance remained consistent across species. The results demonstrate the feasibility and efficiency of UAV LiDAR point cloud data for stand-level biomass estimation, providing simple and effective models for biomass estimation in these two species. Full article

This study advances vegetation and forest mapping in temperate mixed forests by integrating airborne hyperspectral imagery (HSI) and light detection and ranging (LiDAR) data, overcoming the limitations of conventional multispectral imaging. Employing a Digital Canopy Height Model (DCHM) derived from LiDAR, our approach integrates these structural metrics with hyperspectral spectral information, alongside detailed remote sensing data extraction. Through machine learning-based clustering, which combines both structural and spectral features, we successfully classified eight specific tree species, community boundaries, identified dominant species, and quantified their abundance, contributing to precise vegetation and forest type mapping based on predominant species and detailed attributes such as diameter at breast height, age, and canopy density. Field validation indicated the methodology’s high mapping precision, achieving overall accuracies of approximately 98.0% for individual species identification and 93.1% for community-level mapping. Demonstrating robust performance compared to conventional methods, this novel approach offers a valuable foundation for National Forest Ecology Inventory development and significantly enhances ecological research and forest management practices by providing new insights for improving our understanding and management of forest ecosystems and various forestry applications. Full article

Agricultural greenhouse gas (GHG) emissions contribute significantly to climate change and underline the importance of reliable measurements and mitigation strategies. This life cycle assessment (LCA)-based study evaluates the environmental impacts of four key Mediterranean agricultural products, namely olives, sweet potatoes, corn, and grapes using GHG measurements at four pilot fields located in different regions of Greece. With the use of a cradle-to-gate approach six environmental impact categories, more specifically acidification potential (AP), eutrophication potential (EP), global warming potential (GWP), ozone depletion potential (ODP), photochemical ozone creation potential (POCP), and cumulative energy demand (CED) as energy-based indicator are assessed. The functional unit used is 1 ha of cultivated land. Any potential carbon offsets from mitigation practices are assessed through an integrated low-carbon certification framework and the use of innovative, site-specific technologies. In this context, the present study evaluates three life cycle inventory (LCI)-based scenarios: Baseline (BS), which represents a 3-year crop production period; Field-based (FS), which includes on-site CO₂ and CH₄ measurements to assess the effects of mitigation practices; and Inventoried (IS), which relies on comprehensive datasets. The adoption of carbon mitigation practices under the FS scenario resulted in considerable reductions in environmental impacts for all pilot fields assessed, with average improvements of 8% for olive, 5.7% for sweet potato, 4.5% for corn, and 6.5% for grape production compared to the BS scenario. The uncertainty analysis indicates that among the LCI-based scenarios evaluated, the IS scenario exhibits the lowest variability, with coefficient of variation (CV) values ranging from 0.5% to 7.3%. In contrast, the FS scenario shows slightly higher uncertainty, with CVs reaching up to 15.7% for AP and 14.7% for EP impact categories in corn production. The incorporation of on-site GHG measurements improves the precision of environmental performance and supports the development of site-specific LCI data. This benchmark study has a noticeable transferability potential and contributes to the adoption of sustainable practices in other regions with similar characteristics. Full article

In the case of forest inventory, heterogeneous areas are particularly challenging due to variability in vegetation structure. This is especially true in Galicia (northwest Spain), where land is highly fragmented, complicating the planning and management of single-species plantations such as Pinus radiata. This study proposes a cost-effective strategy using open-access tools and data to characterize and estimate wood volume in these plantations. Two stratification approaches—classical and cluster-based—were compared to a modeling method based on Principal Component Analysis (PCA). Data came from open-access national LiDAR point clouds, acquired using manned aerial vehicles under the Spanish National Aerial Orthophoto Plan (PNOA). Moreover, two volume estimation methods were applied: one from the Xunta de Galicia (XdG) and another from Spain’s central administration (4IFN). A Generalized Linear Model (GLM) was also fitted using PCA-derived variables with logarithmic transformation. The results show that although overall volume estimates are similar across methods, cluster-based stratification yielded significantly lower absolute errors per hectare (XdG: 28.04 m³/ha vs. 44.07 m³/ha; 4IFN: 25.64 m³/ha vs. 38.22 m³/ha), improving accuracy by 7% over classical stratification. Moreover, it does not require precise field parcel locations, unlike PCA modeling. Both official volume estimation methods tended to overestimate stock by about 10% compared to PCA. These results confirm that clustering offers a practical, low-cost alternative that improves estimation accuracy by up to 18 m³/ha in fragmented forest landscapes. Full article

Pediatric palliative care (PPC) is an evolving field that focuses on supporting children with life-limiting conditions, where the quality of care is vital. This study is a retrospective observational investigation that examines the experiences of caregivers to inform health and social service planning and enhance PPC quality. Methods: Data of pediatric patients aged 3 months to 18 years admitted to a PPC inpatient unit over two years were retrospectively reviewed. Sociodemographic characteristics of primary caregivers, including age, gender, number of siblings, education, income, occupation, and marital status, were recorded. Caregiver burden and burnout were assessed using the Zarit Burden Interview and the Maslach Burnout Inventory, respectively. Associations between caregiver characteristics and these measures were analyzed. Results: A total of 118 patients and caregivers were evaluated; 54.2% of patients were male. The most common diagnoses were neurological diseases (44.9%), followed by syndromic–genetic disorders (28.8%). About 34% of patients required more than three medical devices. Most caregivers were female (91.5%), mainly mothers and 53% had only primary education. No significant differences in care burden or burnout were found based on caregiver gender, marital status, or child’s diagnosis. However, the use of nasogastric tubes and multiple medical devices was associated with higher burnout. Lower income was significantly linked to higher care burden, while longer caregiving duration correlated with both increased burden and burnout. A moderate positive correlation was found between Zarit and Maslach scores. Conclusions: The complexity of PPC patients’ care increases caregiver burden and burnout. Expanding specialized PPC services is crucial to support caregivers and sustain home-based care. Full article

Field-based landslide mapping is a crucial task for geo-hydrological risk assessment but is often limited by the lack of integrated tools to capture accurate spatial and temporal data. This research investigates a Direct Numerical Cartography (DNC) system’s ability to capture both spatial and temporal landslide features during fieldwork. DNC enables fully digital surveys, minimizing errors and delivering real-time, spatially accurate data to experts on site. We tested an integrated approach combining the Ground Operative System for GIS Input Remote-data Acquisition (GOGIRA) with the Expert-based Multitemporal AI Detector (ExMAD). GOGIRA is a low-cost system for efficient georeferenced data collection, while ExMAD uses AI and multitemporal Sentinel-2 imagery to detect landslide triggering times. Upgrades to GOGIRA’s hardware and algorithms were carried out to improve its mapping accuracy. Field tests in Western Greece compared data to 64 expert-confirmed landslides, with the Range-R device showing a mean spatial error of 50 m, outperforming the tripod-based UGO device at 82 m. Operational factors like line-of-sight obstructions and terrain complexity affected accuracy. ExMAD applied a pre-trained U-Net convolutional neural network for automated temporal trend detection of landslide events. The combined DNC and AI-assisted remote sensing approach enhances landslide inventory precision and consistency while maintaining expert oversight, offering a scalable solution for landslide monitoring. Full article

Background: This study develops a decision-making framework for the identification and performance preservation of strategic products using a non-parametric analysis of items within the product portfolio. Methods: Data Envelopment Analysis (DEA) and the sensitivity analysis of Inverted Data Envelopment Analysis (IDEA) are adapted to explore a new application area in growth product management. A field study from the retail sector of a developing economy is conducted to evaluate the method’s practicality. Results: This study suggests that the power of suppliers, product shelf life, and the ratio of sales to inventory are important supply chain considerations in identifying strategic products accommodated in Slow-Moving Consumer Goods (SMCG) supply chains. Conclusions: The field study shows that sensitivity analysis, in the new application area, provides insights for the identification and performance preservation of strategic items in a product portfolio. Data-driven solutions tailored to the operational needs of the case company and its different product categories conclude this article.. Full article

Global climate change has led to a marked increase in the frequency of record-breaking extreme rainfall events, which often surpass historical benchmarks and pose significant challenges to conventional geological hazard risk assessment methods. This study used a record-breaking extreme rainfall event in Zhenba County, Shaanxi Province, in July 2023 as a case study to develop a tailored risk assessment framework for geological hazards under extreme rainfall conditions. By integrating high-resolution Planet satellite imagery, millimeter-scale surface deformation data derived from SBAS-InSAR, and detailed field investigation results, a comprehensive disaster inventory containing 1012 landslides was compiled. The proposed framework integrates cumulative extreme rainfall metrics with subtle ground deformation indicators and applies four advanced machine learning algorithms—DNN, XGBoost, RF, and LightGBM—for multidimensional hazard assessment. Among these, the DNN model exhibited the highest performance, achieving an AUC of 0.82 and Kappa coefficients of 0.833 (training) and 0.812 (prediction). Further analysis using SHAP values identified distance to rivers, cumulative rainfall, and the Topographic Wetness Index (TWI) as the most influential factors governing landslide occurrence under extreme rainfall conditions. Validation using representative case studies confirmed that the framework effectively identifies high-hazard zones, particularly in areas severely impacted by debris flows and landslide deformation zones. These findings provide a robust scientific foundation and technical basis for early warning, disaster prevention, and mitigation strategies in geologically complex regions increasingly affected by extreme rainfall events. Full article