Search Results (30)

Background: Fatty acids (FAs) represent a ubiquitous class of nonpolar alkyl carboxylate metabolites with diverse biological functions. Nutrition, metabolism, and endogenous and exogenous stress influence the overall FA metabolic status and transport via the bloodstream. FAs esterified in lipids are of particular interest, as they represent promising biomarkers of pathological diseases and nutritional status. Methods: Here, we report a validated gas chromatographic-mass spectrometric (GC-MS) method for the quantitative analysis of 32 FAs exclusively bound in esterified lipids. The developed sample preparation protocol comprises three steps using only 5 µL of human serum for Folch extraction, sodium methoxide-catalyzed transesterification in tert-butyl methyl ether, and re-extraction in isooctane prior to a quantitative GC-MS analysis with positive ion chemical ionization (PICI) and selected ion monitoring (SIM). Results: The base-catalyzed transmethylation step was studied for 14 lipid classes and was found to be efficient under mild conditions for all major esterified lipids but not for free FAs, lipid amides, or sphingolipids. To minimize matrix effects and instrument bias, internal fatty acid trideuteromethyl esters (D3-FAME) standards were prepared through isotope-coded derivatization with D3-labeled methylchloroformate/methanol medium mixed with each transmethylated serum extract for the assay. The method was validated according to FDA guidelines and evaluated by analyzing NIST SRM 2378 Serum 1 and sera from three healthy donors. Conclusions: The measured quantitative FA values are consistent with the reference data of SRM 2378, and they demonstrate the application potential of the described method for general FA analysis in esterified lipids as a novel complementary tool for lipidomics, as well as for the analysis of membrane FAs in dry blood spots and red blood cells. Full article

Throughout the decades, the production, transport, and use of fossil fuels have led to numerous environmental concerns. Crude oil has caused catastrophic accidents after its spillage into the aqueous environment and accumulation on coastal sediments. To tackle this problem in a sustainable manner, researchers have used alternative remediation agents to extract these crude oil spills from the sediments. In this study, the biodiesels fatty acid methyl, ethyl, and butyl esters (FAME, FAEE, and FABE, respectively) were synthesized via transesterification reaction from waste cooking oil and corresponding alcohol in the presence of a catalyst, potassium hydroxide, and used as remediation agents for crude oil extraction. The influence of different experimental conditions on the crude-oil removal efficiency was studied (time of 1, 2, or 4 h; mass ratio of biodiesel to crude oil of 0.5:1, 1:1, or 2:1), with a simulation of coastal effects using a shaker. UV/Vis spectrophotometry was used to determine crude-oil separation efficiency based on the correlation of the residual crude-oil mass fraction and corresponding absorbance. The results show that FAME and FAEE were most effective in the removal of crude oil from sand (removing 88–89%), while FAEE and FABE extracted the most crude oil from gravel (removing 74–77%). Full article

Antarctic krill tropomyosin (AkTM) has been shown in mice to cause IgE-mediated food allergy. The objective of this work was to investigate the role of Notch signaling in AkTM-sensitized mice, as well as to determine the changes in gut microbiota composition and short-chain fatty acids (SCFAs) in the allergic mice. An AkTM-induced food allergy mouse model was built and N-[N-(3,5-difluorophenacetyl)-L-alanyl]-S-phenylglycine t-butyl ester (DAPT) was used as an γ-secretase inhibitor to inhibit the activation of Notch signaling. Food allergy indices, some key transcription factors, histologic alterations in the small intestine, and changes in gut microbiota composition were examined. The results showed that DAPT inhibited Notch signaling, which reduced AkTM-specific IgE, suppressed mast cell degranulation, decreased IL-4 but increased IFN-γ production, and alleviated allergic symptoms. Quantitative real-time PCR and Western blotting analyses revealed that expressions of Hes-1, Gata3, and IL-4 were down-regulated after DAPT treatment, accompanied by increases in T-bet and IFN-γ, indicating that Notch signaling was active in AkTM-sensitized mice and blocking it could reverse the Th1/Th2 imbalance. Expressions of key transcription factors revealed that Notch signaling could promote Th2 cell differentiation in sensitized mice. Furthermore, 16S rRNA sequencing results revealed that AkTM could alter the diversity and composition of gut microbiota in mice, leading to increases in inflammation-inducing bacteria such as Enterococcus and Escherichia-Shigella. Correlation analysis indicated that reduced SCFA concentrations in AkTM-allergic mice may be related to decreases in certain SCFA-producing bacteria, such as Clostridia_UCG-014. The changes in gut microbiota and SCFAs could be partially restored by DAPT treatment. Our findings showed that inhibiting Notch signaling could alleviate AkTM-induced food allergy by correcting Th1/Th2 imbalance and modulating the gut microbiota. Full article

Microbial conversion of agri-food waste to valuable compounds offers a sustainable route to develop the bioeconomy and contribute to sustainable biorefinery. Clostridium tyrobutyricum displays a series of native traits suitable for high productivity conversion of agri-food waste, which make it a promising host for the production of various compounds, such as the short-chain fatty acids and their derivative esters products. In this study, a butanol synthetic pathway was constructed in C. tyrobutyricum, and then efficient butyl butyrate production through in situ esterification was achieved by the supplementation of lipase into the fermentation. The butyryl-CoA/acyl-CoA transferase (cat1) was overexpressed to balance the ratio between precursors butyrate and butanol. Then, a suitable fermentation medium for butyl butyrate production was obtained with xylose as the sole carbon source and shrimp shell waste as the sole nitrogen source. Ultimately, 5.9 g/L of butyl butyrate with a selectivity of 100%, and a productivity of 0.03 g/L·h was achieved under xylose and shrimp shell waste with batch fermentation in a 5 L bioreactor. Transcriptome analyses exhibited an increase in the expression of genes related to the xylose metabolism, nitrogen metabolism, and amino acid metabolism and transport, which reveal the mechanism for the synergistic utilization of xylose and shrimp shell waste. This study presents a novel approach for utilizing xylose and shrimp shell waste to produce butyl butyrate by using an anaerobic fermentative platform based on C. tyrobutyricum. This innovative fermentation medium could save the cost of nitrogen sources (~97%) and open up possibilities for converting agri-food waste into other high-value products. Full article

To enhance the performance and reduce the amount of ester-based lubricants used in weak gel drilling fluids, a shear dynamics simulation under extreme pressure conditions was employed to refine the formulation of the base oil and pressure additives. The simulation results were validated using fatty acid methyl, ethyl, and butyl esters. Fatty acid methyl ester demonstrated the lowest temperature increase and the highest load-bearing capacity post-shear. The four-ball friction test revealed that methyl oleate had a coefficient of friction of 0.0018, approximately a third of that for butyl oleate, confirming the simulation’s accuracy. By using methyl oleate as the base oil and oleamide as the pressure-resistant component, the optimal shear stress was achieved with a 10% addition of oleamide. A lubricant composed of 90% methyl oleate and 10% oleamide was tested and showed a coefficient of friction of 0.03 when 0.5% was added to bentonite slurry, indicating a strong lubricating film. Adding 1% of this lubricant to a low gel drilling fluid system did not affect its rheological properties, and the gel structure remained stable after seven days of aging. Field tests at the Fu86-3 well in the Jiangsu Oilfield of Sinopec confirmed that adding 1% of the ester-based lubricant to the drilling fluid significantly improved drilling efficiency, reduced drag by an average of 33%, and increased the drilling rate to 22.12 m/h. This innovation effectively prevents drilling complications and successfully achieves the objectives of enhancing efficiency. Full article

A novel antioxidant containing four hydroxyl groups, namely 2,2′-(2-methylpropane-1,3-diyl)bis(hydroquinone) (MPBHQ), was synthesized using hydroquinone and methylallyl alcohol as the raw materials, phosphoric acid as the catalyst, and toluene as the solvent system. The structure of MPBHQ was characterized by mass spectrometry, nuclear magnetic resonance, ultraviolet spectroscopy, and infrared spectroscopy. The results showed that MPBHQ has a good radical scavenging effect, as measured by the ORAC assay, DPPH radical scavenging assay, ABST radical scavenging assay, and Rancimat test. In fatty acid methyl ester and lard without exogenous antioxidants, MPBHQ showed better antioxidant performance than butylated hydroxytoluene (BHT), hydroquinone (HQ), tert-butyl hydroquinone (TBHQ), and propyl gallate (PG), meeting the need for a new antioxidant with better properties to ensure the oxidative stability of lipids and biodiesel. Full article

Together with its comorbidities, nonalcoholic fatty liver disease (NAFLD) is likely to rise further with the obesity epidemic. However, the literature’s evidence shows how its progression can be reduced by the administration of calorie-restrictive dietary interventions and physical activity regimens. The liver function and the gut microbiota have been demonstrated to be closely related. With the aim of ascertaining the impact of a treatment based on the combination of diet and physical activity (versus physical activity alone), we recruited 46 NAFLD patients who were divided into two groups. As a result, we traced the connection between volatile organic compounds (VOCs) from fecal metabolomics and a set of statistically filtered clinical variables. Additionally, we identified the relative abundances of gut microbiota taxa obtained from 16S rRNA gene sequencing. Statistically significant correlations emerged between VOCs and clinical parameters, as well as between VOCs and gut microbiota taxa. In comparison with a physical activity regimen alone, we disclose how ethyl valerate and pentanoic acid butyl ester, methyl valerate, and 5-hepten-2-one, 6-methyl changed because of the positive synergistic effect exerted by the combination of the Mediterranean diet and physical activity regimens. Moreover, 5-hepten-2-one, 6-methyl positively correlated with Sanguinobacteroides, as well as the two genera Oscillospiraceae-UCG002 and Ruminococcaceae UCG010 genera. Full article

Andrographis macrobotrys Nees is an ethnomedicinal plant belonging to the family Acanthaceae, distributed in the moist deciduous and semi-evergreen forests of the southern Western Ghats of India. The objective of this research was to determine the phytochemical composition and bioactive chemical components using gas chromatography and mass spectrometry (GC-MS) and to check the antioxidant potential of the plant part extracts. A. macrobotrys roots, stems, and leaves were obtained from the species’ natural habitat in the Western Ghats, India. The bioactive compounds were extracted using a Soxhlet extractor at 55–60 °C for 8 h in methanol. Identification analysis of A. macrobotrys bioactive compound was performed using GC-MS. Quantitative estimation of phytochemicals was carried out, and the antioxidant capacity of the plant extracts was determined by 2,2′-diphenyl-1-picrylhydrazyl radical scavenging (DPPH) and ferric reducing assays (FRAP). A. macrobotrys has a higher concentration of phenolics in its stem extract than in its root or leaf extracts (124.28 mg and 73.01 mg, respectively), according to spectrophotometric measurements. GC-MS analysis revealed the presence of phytochemicals such as azulene, 2,4-di-tert-butylphenol, benzoic acid, 4-ethoxy-ethyl ester, eicosane, 3-heptadecanol, isopropyl myristate, hexadecanoic acid methyl ester, hexadecanoic acid, 1-butyl-cyclohexanol, 9,12-octadecadienoic acid, alpha-monostearin, and 5-hydroxy-7,8-dimethoxyflavone belonging to various classes of flavonoids, terpenoids, phenolics, fatty acids, and aromatic compounds. Significant bioactive phytochemicals include 2,4-di-tert-butylphenol, 2-methoxy-4-vinylphenol, 5-hydroxy-7,8-dimethoxyflavone, azulene, salvigenin, squalene, and tetrapentacontane. In addition, the antioxidant capability of each of the three extracts was assessed. The stem extract demonstrated impressive DPPH scavenging and ferric reduction activities, with EC₅₀ values of 79 mg/mL and 0.537 ± 0.02 OD at 0.2 mg/mL, respectively. The results demonstrated the importance of A. macrobotrys as a source of medicine and antioxidants. Full article

The discovery of heterogeneous catalysts synthesized in easy, sustainable ways for the valorization of olefins derived from renewable biomass is attractive from environmental, sustainability, and economic viewpoints. Here, an organic–inorganic hybrid catalyst formulated as [MoO₃(Hpto)]·H₂O (2), where Hpto = 5-(2-pyridyl-1-oxide)tetrazole, was prepared by a hydrolysis–condensation reaction of the complex [MoO₂Cl₂(Hpto)]∙THF (1). The characterization of 1 and 2 by FT-IR and Raman spectroscopies, as well as ¹³C solid-state NMR, suggests that the bidentate N,O-coordination of Hpto in 1 (forming a six-membered chelate ring, confirmed by X-ray crystallography) is maintained in 2, with the ligand coordinated to a molybdenum oxide substructure. Catalytic studies suggested that 2 is a rare case of a molybdenum oxide/organic hybrid that acts as a stable solid catalyst for olefin epoxidation with tert-butyl hydroperoxide. The catalyst was effective for converting biobased olefins, namely fatty acid methyl esters (methyl oleate, methyl linoleate, methyl linolenate, and methyl ricinoleate) and the terpene limonene, leading predominantly to the corresponding epoxide products with yields in the range of 85–100% after 24 h at 70 °C. The versatility of catalyst 2 was shown by its effectiveness for the oxidation of sulfides into sulfoxides and sulfones, at 35 °C (quantitative yield of sulfoxide plus sulfone, at 24 h; sulfone yields in the range of 77–86%). To the best of our knowledge, 2 is the first molybdenum catalyst reported for methyl linolenate epoxidation, and the first of the family [MoO₃(L)_x] studied for methyl ricinoleate epoxidation. Full article

The effect of temperature was studied on the synthesis of fatty acid alkyl esters by means of transesterification of waste beef tallow using ethanol and, iso-butanol and 1-butanol at supercritical conditions. These alcohols are proposed for the synthesis of biodiesel in order to improve the cold flow properties of alkyl esters. Alcohol–beef tallow mixtures were fed to a high-pressure high-temperature autoclave at a constant molar ratio of 45:1. Reactions were carried out in the ranges of 310–390 °C and 310–420 °C for ethanol and iso-butanol, respectively; meanwhile, synthesis using 1-butanol was assessed only at 360 °C. After separation of fatty acid alkyl esters, these samples were characterized by nuclear magnetic resonance (NMR) and gas chromatography coupled to mass spectrometry (GC-MS) to quantify yields, chemical composition, and molecular weight. Results indicated that yields enhanced as temperature increased; the maximum yields for fatty acid ethyl esters (FAEEs) were attained at 360 °C, and for fatty acid butyl esters (FABEs) were achieved at 375 °C; beyond these conditions, the alkyl ester yields reached equilibrium. Concerning the physicochemical properties of biodiesel, the predicted cetane number and cloud point were enhanced compared to those of fatty acid methyl esters. Full article

Cereal and leguminous seeds are considered as major generic dietary source of energy, carbohydrates as well as proteins in the Mediterranean diet and are frequently consumed in their immature form in several regions including the Middle East. Hence, the current study aimed to assess metabolites’ heterogeneity amongst five major cereal and leguminous seeds of different species, and cultivars, i.e., Triticum aestivum L. (two cultivars), Hordeum vulgare L., Vicia faba L. and Cicer arietinum L., at different maturity stages. Gas chromatography mass-spectrometry (GC-MS) analysis using multivariate data analyses was employed for nutrient profiling and sample segregation assessed using chemometric tools, respectively. A total of 70 peaks belonging to sugars, fatty acids/esters, steroids, amino acids and organic acids were identified including sucrose, melibiose, glucose and fructose as major sugars, with butyl caprylate, hydroxybutanoic acid and malic acid contributing to the discrimination between seed species at different maturity stages. The investigation of total protein content revealed comparable protein levels amongst all examined seeds with the highest level detected at 20.1% w/w in mature fava bean. Results of this study provide a novel insight on cereal and leguminous seeds’ metabolomics in the context of their maturity stages for the first time in literature. Full article

A natural antioxidant, widely spread in plants, chlorogenic acid (CGA), can be lipophilized through a heterogeneous, non-enzymatic, catalytic process. Thus, sulfonic resins under no solvent conditions allow to obtain a series of esters in up to 93% yield through reaction of CGA with fatty alcohols of different chain length. The reaction takes place in one single step under mild conditions with conversions up to 96% and selectivity up to 99%. Product recovery in high purity was very easy and the esters obtained were fully characterized with spectroscopic techniques and through the DPPH test to verify the preservation of antioxidant activity. According to this test, all of them showed increased activity with respect to the parent acid and anyway higher than butylated hydroxyanisole. An in-silico method also suggested their very low toxicity. The increased lipophilicity of the esters allows their formulation in cosmetic and nutraceutic lipid-based products. Full article

In this study, the synthesis of a Michael donor compound from cellulose production by-products—tall oil fatty acids—was developed. The developed Michael donor compounds can be further used to obtain polymeric materials after nucleophilic polymerization through the Michael reaction. It can be a promising alternative method for conventional polyurethane materials, and the Michael addition polymerization reaction takes place under milder conditions than non-isocyanate polyurethane production technology, which requires high pressure, high temperature and a long reaction time. Different polyols, the precursors for Michael donor components, were synthesized from epoxidized tall oil fatty acids by an oxirane ring-opening and esterification reaction with different alcohols (trimethylolpropane and 1,4-butanediol). The addition of functional groups necessary for the Michael reaction was carried out by a transesterification reaction of polyol hydroxyl groups with tert-butyl acetoacetate ester. The following properties of the developed polyols and their acetoacetates were analyzed: hydroxyl value, acid value, moisture content and viscosity. The chemical structure was analyzed using Fourier transform infrared spectroscopy, gel permeation chromatography, size-exclusion chromatography and nuclear magnetic resonance. Matrix-assisted laser desorption/ionization analysis was used for structure identification for this type of acetoacetate for the first time. Full article

Efficient bioconversion of abundant waste glycerol to value-added chemicals calls for a wider range of fermentative workhorses that can catabolize glycerol. In this study, we used quantitative gene expression and solvent profiling, qualitative metabolite analysis, and enzyme activity assays to investigate the factors that limit glycerol utilization as a sole carbon source by Clostridium beijerinckii NCIMB 8052. C. beijerinckii NCIMB 8052 did not produce acetate, acetone and butanol on glycerol. Congruently, the genes encoding the coenzyme A transferase subunits (ctfAB) and bifunctional acetaldehyde-CoA/alcohol dehydrogenase (adhE) were down-regulated up to 135- and 21-fold, respectively, at 12 h in glycerol-grown cells compared to glucose-grown cells. Conversely, NADH-dependent butanol dehydrogenase A (bdhA) was upregulated 2-fold. Glycerol dehydrogenase (gldA) and dihydroxyacetone kinase (subunit dhaK) were upregulated up to 5- and 881-fold, respectively. Glyceraldehyde-3-phosphate dehydrogenase (gapdh) showed mostly similar expression profiles at 12 h on glucose and glycerol. At 24 h, gapdh was downregulated 1.5-fold, while NADP⁺-dependent gapdh was upregulated up to 1.9-fold. Glycerol-grown cells showed higher or similar activity profiles for all solventogenic enzymes studied, compared to glucose-grown cells. Butyraldehyde (3 g/L) supplementation led to the production of ~0.1 g/L butanol, whilst butyrate (3.5 g/L) supplementation produced 0.7 and 0.5 g/L acetone and butanol, respectively, with glycerol. Further, the long chain saturated fatty acids cyclopentaneundecanoic acid, methyl ester and hexadecanoic acid, butyl ester were detected in glucose- but not in glycerol-grown cells. Collectively, growth on glycerol appears to disrupt synthesis of saturated long chain fatty acids, as well as solventogenesis in C. beijerinckii NCIMB 8052. Full article

Biodiesel has established itself as a renewable fuel that is used in transportation worldwide and is partially or in some cases completely replacing conventional fuels. Chemically, biodiesel is a fatty acid monoalkyl ester (FAAE). Generally, the term biodiesel refers to the fatty acid methyl or ethyl esters (FAME or FAEE). Herein, an overview of the research on the synthesis of FAAE in which the alkyl moiety is a C₃₊ alkyl chain (branched/unbranched) is given. In addition, a comparison of the properties of the aforementioned FAAE with each other, with FAME and FAEE, and with fuel standards is given. The length of the alkyl chain has a major influence on viscosity, while pour point temperatures are generally lower when branched alcohols are used, but the fatty acid part of the molecule also has a major influence. The development of new pathways for the synthesis of higher alcohols from biomass opens a future perspective for the production of long chain FAAE as biofuels, fuel additives, or biolubricants. Due to their properties, FAAEs produced from C₃–C₅ alcohols have the potential to be used as fuels, while all C₃₊ FAAEs can be used as valuable bioadditives, and C₈₊ FAAEs can be used as biolubricants and viscosity improvers. Full article