Search Results (315)

To clarify the spreading law of river crab pellet feed in a centrifugal spreading mechanism and provide a physical basis for the path planning of automatic feeding boats, this study took 4.0 mm sinking extruded river crab feed as the research object. A systematic research method combining physical experiments and Discrete Element Method (DEM) simulation was established. Physical experiments were conducted to calibrate the intrinsic parameters (density, Poisson’s ratio, elastic modulus) and contact parameters (friction coefficients and restitution coefficients between feed and 304 stainless steel/ABS plastic, as well as between feed particles) of the pellet feed. On this basis, a DEM simulation model of a vibration blanking-dual disc centrifugal spreading mechanism was constructed using the multi-sphere aggregation method and the Hertz-Mindlin (no-slip) contact model. A Central Composite Design (CCD) response surface experiment was employed to investigate the spreading law, with boat speed (0.5–1.5 m/s) and spreading disc rotation speed (800–1000 rpm) as independent variables, and unilateral spreading width (W), track superposition uniformity (ω), and transverse coefficient of variation ($Cv$) as response indicators to characterize spreading range and particle distribution. The results showed that the spreading disc rotation speed had an extremely significant effect (p < 0.0001) on all three response indicators, while boat speed had no significant effect. The feed exhibited a characteristic double fan-shaped superposition distribution pattern. Through multi-objective optimization, the optimal operational parameters were determined as a boat speed of 1.0 m/s and a spreading disc rotation speed of 879 rpm, yielding a unilateral spreading width of 2.9 m, a track superposition uniformity of 88.31%, and a transverse coefficient of variation of 8.33%. This study establishes a quantitative method for analyzing feed spreading characteristics and clarifies the spreading range and particle distribution law, providing a reliable physical basis for full-coverage path planning of crab pond feeding boats. Full article

The Late Eocene Huizhou-A sandy conglomeratic system in the Pearl River Mouth Basin presents a highly heterogeneous reservoir system shaped by intense synsedimentary fault activity and variable depositional processes. Utilizing 3D seismic interpretation, well log analysis, and core calibration, this study reconstructs the tectono-sedimentary evolution, facies distribution, and diagenetic modifications controlling reservoir quality. Results show that the best reservoir quality is not confined to proximal fan-delta coarse-grained deposits near steep boundary faults, but occurs mainly in fan-delta front and braided-river-delta deposits, especially braided- and turbidite-channel microfacies. These reservoirs benefit from better sorting, favorable grain size, and higher textural maturity, whereas proximal clastic-flow deposits are poorer due to heterogeneity, poor sorting, and compaction. Reservoir quality is also depth-dependent: upper Enping reservoirs are mainly controlled by maturity, while lower Enping reservoirs are more influenced by grain size. Semi-quantitative analysis identifies the 7–11 km transport-distance zone as the optimal fairway for vertically stacked high-quality reservoirs. This approach not only guides exploration and development in the Huizhou Sag but also offers a transferable predictive model for similar steep slope lacustrine rift basins with comparable tectono-sedimentary settings worldwide. Full article

Integrating a heat exchanger (HEX) into the cooling duct of a high-power fuel-cell-based aircraft presents a critical trade-off between thermal performance and aerodynamic penalties. The present study addresses this challenge through the design and system-level analysis of a HEX integrated into the cooling duct. Developed as part of the Clean Aviation project FAME, the design features a rectangular inlet, a circular outlet, and a tilted HEX. The evaluation is performed using high-fidelity Large Eddy Simulations (LESs). The HEX is modeled with a porous media approach based on the Darcy–Forchheimer equation, while the simulations are carried out using a self-adapted version of the pisoFoam solver, termed pisoTempFoam, to account for heat transfer. The study reveals that while component-level design choices, such as a straight inlet and tilted HEX configuration, successfully mitigate local flow separation and duct-induced losses, a critical system-level performance issue emerges. The analysis demonstrates that the cooling duct design, when subjected to realistic operational conditions, generates the high pressure head to overcome the resistance of the HEX. The external aerodynamic analysis also indicates that the HEX resistance is a critical factor, and without overcoming it the system fails to capture the required air mass flow rate, compromising thermal management. The findings highlight the necessity to optimize the design, by an adapted duct shape or an auxiliary fan, to overcome the HEX-induced pressure drop. The porous media approach is thereby validated as an effective tool for rapid system-level design analysis, despite its inherent limitation in capturing detailed downstream turbulence. Full article

Blade tip clearance (BTC) is a critical parameter for the thrust, fuel consumption, and operational safety of aero-engines, and its accurate monitorinfg is of significant engineering importance. Traditional eddy current sensors (ECS) in BTC measurement often employ wound coil structures, which suffer from issues such as poor consistency and limited geometric shapes, restricting further optimization of electromagnetic performance. This paper proposes a novel ECS based on ceramic-integrated printed coils. The ECS uses screen printing technology to directly print metal coils onto ceramic substrates and integrate them into a single unit, allowing the coils to be designed with high precision into any topology structure, with high consistency, structural stability, and high temperature tolerance. Performance studies indicate that the sensor can be manufactured with an accuracy of 0.2 mm or better, and the sensor with a line width and spacing of 0.2 mm performed the best in the test. Not only does it exhibit the best electromagnetic performance at room temperature, but it also shows an electromagnetic performance variation of less than 1% after a 24 h aging test at 800 °C. Additionally, it provides stable peak-to-peak and periodic responses to changes in BTC within the range of 0 to 600 rpm for the fan motor. This study provides a promising method for accurate and stable BTC measurement at high temperatures. Full article

Background: Mandibular second molars show notable variability in root canal structures and C-shaped morphology, with possible differences among populations. Methods: This retrospective cross-sectional CBCT study included 500 patients attending the Department of Dentistry at IRCCS Ospedale San Raffaele (Milan, Italy) with bilateral mandibular second molars and was reported according to STROBE guidelines. CBCT scans (Hyperion X5; voxel size 0.125 mm) were assessed by two endodontists using standardized criteria. Root-based canal configurations were classified according to Vertucci in cases with complete bilateral coding of homologous mesial and distal roots; C-shaped morphology was classified using Fan’s system and analyzed separately because Vertucci coding is not applicable to C-shaped systems. Categorical variables were analyzed using χ² or Fisher’s exact test, continuous variables with parametric or non-parametric tests, and right–left comparisons with paired-sample tests (p < 0.05). Results: Complete bilateral Vertucci coding was feasible in 494/500 patients (98.8%), yielding 988 mesial and 988 distal roots for analysis. C-shaped canal configuration was detected in 1.2% of patients (6/500; 95% CI 0.44–2.59%); females showed a higher proportion than males (2.0% vs. 0.4%), with no evidence of a sex association (Fisher’s exact test, p = 0.216). Fan subtype annotation was available for 5/6 patients and 7 teeth; C1, C3, and C4 patterns were observed. In the Vertucci dataset, mesial roots most frequently exhibited Types II (52.0%) and IV (26.5%), whereas distal roots were predominantly Type I (62.4%), followed by Type III (29.8%). Contralateral symmetry was observed in 27.3% of mesial roots (135/494; 95% CI 23.4–31.5%) and 59.1% of distal roots (292/494; 95% CI 54.6–63.5%). Mean pulp chamber roof-to-floor distance was 2.623 ± 0.263 mm on the right and 2.567 ± 0.343 mm on the left (paired p < 0.001; mean difference 0.056 mm; 95% CI 0.023–0.089 mm). Conclusions: In this cohort, C-shaped morphology was rare, and no evidence of a sex association was found, although the small number of cases limits statistical power. Mesial roots showed more variability than distal roots, and contralateral symmetry was moderate and greater for distal roots than for mesial roots, supporting contralateral anatomy as a helpful—rather than predictive—clinical reference. Full article

This study addresses pressure regulation in an induction-motor-driven centrifugal fan and introduces two complementary novelties: a Softsign-PI controller that shapes the tracking error via a Softsign nonlinearity before PI regulation and a hybrid starfish optimization with a differential evolution (hSFOA-DE) scheme for automatically tuning the controller parameters. The approach is evaluated on an experimentally validated nonlinear fan–motor model and benchmarked against modern metaheuristics—starfish optimization algorithm (SFOA), animated oat optimization (AOO), electric eel foraging optimization (EEFO), differential evolution (DE), particle swarm optimization (PSO)—as well as classical tunings—Murrill-based 2-DOF PID, Tyreus–Luyben PID and Ziegler–Nichols PI. Statistical summaries and boxplots indicate superior central tendency with reduced run-to-run variability; fitness–evolution curves show faster convergence; and time-domain performance metrics confirm improved transient and steady-state behaviour. Objective function comparisons further show the lowest values of both the Zwe-Lee Gaing (ZLG) and integral of absolute error (IAE), supporting advantages in robustness and tracking accuracy of the proposed approach. These gains reduce overshoot and cumulative error, which can lessen throttling losses and actuator duty in fan/pump service, suggesting potential energy and maintenance benefits. Full article

Introduction. The superficial musculoaponeurotic system (SMAS) is fundamental for facial soft tissue support and surgical rejuvenation. Although its morphology in the midface and neck is well characterized, the structure of its cranial extension to the forehead remains a subject of terminological uncertainty. The aim of this study was to conduct a detailed histological and immunohistochemical examination of the forehead supporting structures to characterize their morphology and propose an expanded, region-specific classification of the SMAS. Material and methods. Full-thickness tissue specimens (n = 30) were obtained from five standardized facial regions (parotid, buccal, temporal, frontal, and cervical) from 12 male and 18 female body donors (aged 25–70 years). Specimens were processed for histological analysis using hematoxylin and eosin, van Gieson staining, and Masson’s trichrome. Immunohistochemical staining for S100 protein was used to identify neural structures. Morphometric analysis was performed on digitized sections to quantify interseptal distances and the depth of superficial nerve trunks. Results. The analysis confirmed the established SMAS types (I–V) in the cheek, parotid gland, and neck, confirming the validity of the method. Two distinct, sequentially arranged structures were identified on the forehead, proposed as new types. Type VI (neurovascular arborization) is a discrete fan-shaped structures with a central collagen core surrounding a neurovascular bundle, showing positive S100 staining. These structures, spaced approximately 2.2 mm apart, function as true retaining ligaments. Type VII (fibroseptal) SMAS patterns is vertically oriented, purely fibrous septa (retinacula cutis) connecting the aponeurosis to the dermis, devoid of neural elements, and spaced approximately 9.2 mm apart. Importantly, the superficial nerve trunks were located at an average depth of only 1.09 mm (range: 0.57–1.97 mm) from the skin surface. Conclusion. This study identified two novel SMAS patterns in the forehead—neurovascular arborization (type VI) and fibroseptal (type VII)—supporting the expanded functional seven-type classification of the SMAS. The extremely superficial location of the forehead nerves (average 1.1 mm) defines a critical “danger zone” for aesthetic procedures. These findings provide a refined anatomical basis for improving the precision and safety of both surgical and minimally invasive facial procedures. Full article

Twenty strains of Schizophyllum commune from the BIOTEC culture collection were selected for this study. S. commune is characterized by white to gray fan-shaped caps with lobed margins and distinctive split gills. Phylogenetic analysis of combined LSU rDNA and ITS rDNA sequences data using maximum parsimony placed the fungi in a strongly supported clade with S. commune. All strains were primarily screened for exopolysaccharide (EPS) and biomass production using potato dextrose broth (PDB) and peptone yeast glucose medium (PYGM) in 250 mL flasks shaken at 200 rpm for 7 days. The results revealed three strains with high EPS production, each exceeding 2.3 g/L, namely MMCR00487, MMCR00474 and MMCR00256. These strains were selected for media optimization using a Plackett–Burman design. Among them, MMCR00256 exhibited the highest EPS yield of 8.34 ± 1.47 g/L, followed by MMCR00487 and MMCR00474. Therefore, the strain MMCR00256 was further optimized by central composite design. The results revealed that the optimized medium for MMCR00256 increased the production of EPS to 10.39 ± 1.69 g/L, with a biomass yield of 26.28 ± 1.63 g/L (395 mg/g). The 5 L bioreactor optimization tested two inoculum types (mycelial and pellet) and two media (CCD and estimated) using strain MMCR00256. The mycelial inoculum grown in the estimated medium produced the highest EPS yield of 8.37 ± 0.26 g/L after 3 days, with 13.56 ± 2.94 g/L biomass. In conclusion, this study demonstrates that S. commune MMCR00256, when cultivated using the estimated medium and mycelial inoculum, can achieve enhanced exopolysaccharide production with improved efficiency, highlighting its significant potential for the development of efficient and scalable schizophyllan production processes at the industrial scale. Furthermore, this study provides essential insights into the cultivation and optimization of schizophyllan in S. commune. Full article

This study presents the development and numerical investigation of a full-section fog curtain dust suppression system installed in the return airway of a fully mechanized longwall mining face, designed to mitigate airborne dust emissions escaping from the return airway during coal extraction. To optimize nozzle selection, comparative experiments were conducted under varying water pressure conditions. A porous medium model was employed to represent the dust capture mesh, enabling a systematic analysis of the pressure drop and airflow resistance characteristics across a range of wind velocities; the model parameters—viscous resistance coefficient (D) and inertial resistance coefficient (C₂)—were calibrated accordingly. Subsequently, coupled computational fluid dynamics simulations of fog dispersion and airflow fields were performed using a validated full-scale geometric model of the fully mechanized mining face. The influence of mesh pore size—via its effect on droplet size distribution uniformity—on the spatial distribution and velocity profile of the airflow field was quantitatively evaluated. The results show that the optimal spray nozzle was the fan-shaped atomizing spray nozzle, with a selected water pressure of 0.6 MPa. The droplet concentration in the porous media section increased from 0.026 kg∙m⁻³ to 0.052 kg∙m⁻³, and the volume share increased from 51.5% to 74.5%. The concentration of the filtered droplet increased from 0.00067 kg∙m⁻³ to 0.0013 kg∙m⁻³, and the size of particles adsorbed by the porous media increased from 140 μm in the proportion of most particles to 0.0013 kg∙m⁻³. The proportion of most particles above 140 μm was reduced to a range of 0–80 μm, and the optimal pore size was selected to be 100 mesh. Dust measurements were conducted at different measuring points in the return airway of the 25212 comprehensive mining face in the Hongliulin North plate area. The overall dust removal rates at points A, B, and C reached 88.90%, 83.71%, and 84.85%, and the respiratory dust removal rates reached 81.24%, 79.39%, and 80.33%, respectively, indicating that dust removal is effective. Full article

The critically endangered fan mussel Pinna nobilis is under strict protection in the Mediterranean waters and exhibited a documented fishing history in Greece dating back to 19th and early of 20th centuries. The present study examined historical documentary evidence from Greek archives, technical reports, and oral testimonies to reconstruct traditional fishing methods and their ecological implications. Historical records revealed the widespread use of specialized fishing tools called “pinologos”, a Y-shaped iron attached to a wooden poles, deployed primarily in shallow waters (2–7 m depth) across various Greek coastal regions in the Ionian and Aegean Seas. Two types of fishing gear existed, a simple Y-shaped tong and a scissor-type gear, both designed to encircle and extract individual fan mussels, through quarter-turn rotation. Fishers selectively targeted only large, established individuals of fan mussel, as small specimens with thin shells were unsuitable for this method. Historical fishing pressure on the species was spatially and size-limited, unlike current basin-wide mortality events. These findings demonstrate that structured populations persisted even under traditional exploitation, suggesting potential for recovery if contemporary threats are mitigated. Management strategies should reference historical population structures as restoration targets. Full article

Freeform Fresnel lenses combine the powerful beam-shaping capability of freeform optics with the lightweight and compact characteristics of conventional Fresnel structures, leading to their increasing adoption across diverse applications. This paper proposes and experimentally validates a method for generating rectangular dark hollow beams using a freeform Fresnel lens. The lens is divided into multiple fan-shaped sectors centered on the optical axis, with each sector generating a defocused spot at a distinct spatial location. Based on geometrical optics, a freeform Fresnel lens with a 25 mm aperture is designed to produce a square hollow beam with a side length of 10 mm. A lens with a division angle of 5° was fabricated using ultra-precision diamond turning. The angular form error was measured to be below 0.1°, and the surface roughness was found to be below 10 nm. An optical testing system was established to characterize the generated beam profile. The experimental results successfully demonstrate the formation of the desired rectangular dark hollow beam. The measured results agree well with the simulations, confirming the feasibility and practical potential of the proposed method. Full article

Existing studies have extensively investigated sand-rich shallow-water deltas. However, the sedimentary characteristics and internal architecture of mud-rich deltas remain poorly understood. In this study, two comparative flume experiments were conducted with sand–mud ratio as the key variable. High-resolution topographic data were acquired using a laser scanner to extract geometric parameters of the architectural elements. Three-dimensional architectural models were established and validated against the Ganjiang Delta (sand-rich) and the Ouchi River Delta (mud-rich) in China. The results reveal contrasting depositional styles: sand-rich deltas develop dense, laterally migrating braided channels with broad fan-shaped morphologies, forming blanket-like geometries that consist of vertically stacked and laterally amalgamated channel complexes with good connectivity; mud-rich deltas are characterized by stable channels with limited bifurcation, forming elongated finger-like morphologies with isolated, ribbon-like channel–mouth bar complexes that exhibit strong lateral heterogeneity and poor connectivity. These contrasting behaviors are governed by sediment cohesion: non-cohesive sands promote channel migration and dispersion, whereas cohesive silt and mud stabilize channels and focus sediment transport along main conduits. The experimental models successfully reproduce natural delta end-members, confirming the universal control of the sand–mud ratio. The established quantitative relationships provide a predictive basis for subsurface reservoir characterization and the formulation of differentiated development strategies. Full article

When high-altitude aircraft operate in a low-density environment, the flow instability within their internal ducts poses a severe challenge to aerodynamic design and operational safety. Especially in the intake system of the tandem dual-fan configuration, the asymmetric flow caused by rotating machinery coupled with the low-density effect exacerbates flow distortion, momentum dissipation, and efficiency loss and may even trigger system instability risks such as rotational stall or surge. To address these challenges, this paper establishes a high-fidelity dynamic model of the internal flow field of the aircraft, based on the Reynolds-averaged Navier–Stokes equations and the SST k-ω turbulence model, combined with dynamic mesh technology. It reveals the unstable mechanism caused by angular momentum accumulation under co-rotation conditions and its intrinsic correlation with the degradation of aerodynamic performance. Inspired by the concept of micro-flow regulation, an active flow control strategy integrating discrete auxiliary injection and local geometric shape optimization is proposed. Numerical results show that by reasonably arranging auxiliary injection holes in the intake duct and optimizing local geometric fillets, the uniformity of intake flow can be effectively improved, and the formation of large-scale vortex structures can be suppressed. This method increases the system’s flow capacity by approximately 47.4%, significantly improves the total pressure recovery coefficient and fan aerodynamic efficiency, and reduces the amplitude of low-frequency pressure fluctuations by approximately 23.1%. Research shows that in high-altitude low-Reynolds-number conditions, micro-flow regulation combined with geometric reconstruction can effectively suppress flow instability induced by rotating machinery. This achievement provides a theoretical basis and feasible engineering path for aerodynamic stability design and optimization of key components, such as the aircraft intake and exhaust systems and thermal management systems, and is of significant value for improving the overall performance and reliability of high-altitude long-endurance aircraft. Full article

Large-scale backward-curved centrifugal fans without volutes are extensively employed in enclosed air-cooled electric motors owing to their exceptional heat dissipation performance. This category of fans features substantial blade dimensions and a multitude of optimization parameters, which introduce challenges such as diminished predictive accuracy in high-dimensional optimization spaces. To address these issues, this paper proposes a blade optimization design methodology based on a GA-Kriging surrogate model. Sobol’s global sensitivity analysis is first employed to reduce model dimensionality. Subsequently, a high-fidelity aerodynamic performance prediction model is constructed through the integration of a Genetic Algorithm (GA) and a Kriging model. A constrained optimization is then conducted with volumetric flow rate and static pressure as the design objectives, and shaft power along with geometric point coordinates as the constraints. Experimental test results demonstrate that the fan optimized via the surrogate model, while maintaining low prediction error, achieves a 14% increase in volumetric flow rate and a 20% improvement in static pressure. This outcome indicates a significant enhancement in the overall aerodynamic performance. Full article

The constituent elements of source-to-sink systems and their coupling relationships are key controls on the development of sedimentary systems and the spatial distribution of sand bodies. Taking the Paleogene strata in the southern Laizhouwan Sag of the Bohai Bay Basin as a case study, we integrate drilling, logging, core, thin-section, and high-resolution 3D seismic data to quantitatively characterize basement lithology and effective provenance area, drainage-unit subdivision, types and scales of sediment transport pathways, and geometric parameters of depositional fans, within a source-to-sink analytical framework. The results show that: (1) Two distinct provenance types are developed in the southern Laizhouwan Sag, including Proterozoic granitic–gneissic basement and Mesozoic volcanic–clastic basement. These provenance types exhibit pronounced differences in effective source area, vertical relief, and drainage-network configuration across different sequence stages. (2) Two main categories of sediment transport pathways are identified, namely paleo-valleys and fault-controlled troughs. V-shaped, U-shaped, and W-shaped paleo-valleys show systematic morphological transitions along topographic gradients. The width-to-depth ratio of transport channels exerts a significant control on depositional fan scale, with U-shaped valleys exhibiting the highest sediment transport efficiency. Finally, (3) the depositional domain is dominated by near-source fan-delta systems, whose scale shows a strong positive correlation with effective provenance area and transport-channel morphology. Overall, the southern Laizhouwan Sag is characterized by a typical fault-controlled, steep-slope source-to-sink system, in which sedimentary system distribution is jointly governed by effective provenance area, sediment transport pathway geometry, and fault-related slope-break zones. This study provides a quantitative example and methodological reference for source-to-sink system characterization and prediction of favorable sand body distribution in continental rift basins. Full article