Search Results (56)

The research reviews and contrasts two studies based on the gas-phase reaction OH + D₂(v, j). In these studies, Quasi-Classical Trajectory (QCT) calculations and the Gaussian Binning (GB) technique were used on the Wu–Schatz–Lendvay–Fang–Harding (WSLFH) potential energy surface. Large sample sizes allow for precise energy state distribution analysis across translational, vibrational, and rotational components in the products. A key observation is the influence of the vibrational and rotational excitation of D₂ on the total angular momentum (J′) of the HOD* product. This study reveals that increasing the vibrational level, vD₂, significantly shifts P(J′) distributions toward higher values, broadening them due to increased isotropy. In contrast, increasing the rotational level, jD₂, results in a smaller shift but introduces greater anisotropy, leading to a more selective distribution of J′ values. The dual Gaussian Binning selection—Vibrational-GB followed by Rotational-GB—further highlights a preference for either odd or even J′ values, depending on the specific excitation conditions. These findings have implications for the development of chemical lasers, as the excitation and emission properties of HOD* can be leveraged in the laser design. Future research aims to extend this study to a broader range of initial conditions, refining the understanding of reaction dynamics in controlled gas-phase environments. Full article

This study investigates the application of additive manufacturing (AM) in fabricating transverse thermoelectric (TTE) composites, demonstrating the feasibility of this methodology for TTE material synthesis. Zinc oxide (ZnO), a wide-bandgap semiconductor with moderate thermoelectric performance, and copper (Cu), a highly conductive metal, were selected as base materials. These were formulated into stable paste-like feedstocks for direct ink writing (DIW). A custom dual-nozzle 3D printer was developed to precisely deposit these materials in pre-designed architectures. The resulting structures exhibited measurable transverse Seebeck effects. Unlike prior TE research primarily focused on longitudinal configurations, this work demonstrates a novel AM-enabled strategy that integrates directional compositional anisotropy, embedded metal–semiconductor interfaces, and scalable multi-material printing to realize TTE behavior. The approach offers a cost-effective and programmable pathway toward next-generation energy harvesting and thermal management systems. Full article

In this work, we propose and analyze a thermally tunable metasurface based on indium antimonide (InSb), designed to operate in the terahertz (THz) frequency range. The metasurface exhibits dual functionalities: single-band perfect absorption and efficient polarization conversion, enabled by the temperature-dependent permittivity of InSb. At approximately 280 K, InSb transitions into a metallic state, enabling the metasurface to achieve near-unity absorptance (100%) at 0.408 THz under normal incidence, independent of polarization. Conversely, when InSb behaves as a dielectric at 200 K, the metasurface operates as an efficient polarization converter. By exploiting structural anisotropy, it achieves a polarization conversion ratio exceeding 85% over the frequency range from 0.56 to 0.93 THz, while maintaining stable performance for incident angles up to 45°. Parametric analyses show that the resonance frequency and absorption intensity can be effectively tuned by varying the InSb square size and the silica (SiO₂) layer thickness, achieving maximum absorptance at a SiO₂ thickness of 16 μm. The proposed tunable metasurface offers significant potential for applications in THz sensing, imaging, filtering, and wavefront engineering. Full article

Spindle orientation (SO) plays a critical role in tissue morphogenesis, homeostasis, and tumorigenesis by ensuring accurate division plane positioning in response to intrinsic and extrinsic cues. While SO has been extensively linked to cell shape sensing and cortical forces, the interplay between shape- and force-sensing mechanisms remains poorly understood. Here, we reveal that SO is governed by two parallel mechanisms that ensure redundancy and adaptability in diverse cellular environments. Using live-cell imaging of cultured cells, we demonstrate that the long prometaphase axis (LPA) is a superior predictor of SO compared to the long interphase axis, reflecting adhesive geometry and force distribution efficiently at prometaphase. Importantly, we uncover a pivotal role for focal adhesion kinase (FAK) in mediating cortical mechanosensing to regulate SO in cells undergoing complete metaphase rounding. We show that in cells with complete metaphase rounding, FAK-dependent force sensing aligns the spindle with the major force vector, ensuring accurate division. Conversely, in cells retaining shape anisotropy during mitosis, a FAK-independent shape-sensing mechanism drives SO. These findings highlight a dual regulatory system for SO, where shape sensing and force sensing operate in parallel to maintain division plane fidelity, shedding light on the mechanisms that enable cells to adapt to diverse physical and mechanical environments. Full article

Peptides designed to interfere with specific steps of viral infection mechanisms have shown promising antiviral potential. In this study, we investigated the ability of a synthetic peptide (peptide 303), derived from the fusion protein sequence of the Infectious Salmon Anemia Virus (ISAV), to inhibit membrane fusion mediated by the ISAV fusion peptide (ISAV-FP1). To assess this, we employed a model membrane system consisting of large unilamellar vesicles (LUVs) composed of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), dipalmitoylphosphatidylcholine (DPPC), and cholesterol. Membrane fusion kinetics were monitored via R18 fluorescence dequenching. Additionally, the interaction of peptide 303 with lipid membranes was evaluated using fluorescence anisotropy measurements. The potential direct interaction between peptide 303 and ISAV-FP1 was further examined through Förster Resonance Energy Transfer (FRET) assays. Our results demonstrate that peptide 303 effectively inhibits ISAV-FP1-mediated membrane fusion. Furthermore, peptide 303 was shown to interact with lipid bilayers and with ISAV-FP1 itself. These findings suggest a dual inhibitory mechanism in which peptide 303 both prevents ISAV-FP1 binding to the membrane and directly interacts with the fusion peptide, thereby disrupting its fusogenic activity. Full article

To address the limitations in conventional granular morphology characterization where excessive emphasis has been placed on elongation index (EI) while neglecting flatness index (FI) and their coupled interactions, this study establishes an EI/FI co-regulated dual-parameter morphological characterization framework. Through integrated triaxial compression experiments and discrete element simulations, we systematically investigate multi-scale mechanical responses spanning macroscopic stress–strain behavior to microscopic force-chain evolution. The results show that (1) the regulation of pore structure by morphological parameters presents non-linear characteristics, and (2) the evolution of peak shear strength is predominantly governed by morphological anisotropy. (3) The parabolic relationship between the maximum dilatancy angle and the morphological parameters is shown. (4) The micro mechanical analysis reveals that EI/FI parameters have limited influence on the statistical distribution characteristics of the contact force chain, but have a significant regulatory effect on the anisotropic evolution of the force-chain network. Full article

Coal permeability, a key parameter influencing coalbed methane production and geological storage, is strongly governed by the dual-porosity nature of coal and the stress-dependent evolution of its fracture network. This study investigates the development characteristics of filled and unfilled fractures, and the resulting permeability anisotropy, in typical bright and dull coals from the deep 8# coal seam of the Ordos Basin. Utilizing CT scanning and permeability anisotropy testing, we analyze how fracture development impacts coal permeability and its evolution under stress. Bright coal exhibits a grid-like distribution of mineral-filled fractures with good vertical connectivity, and a complex network of unfilled fractures. In contrast, dull coal displays a scattered distribution of mineral-filled fractures with poor vertical connectivity and a limited number of unfilled fractures. Results indicate an exponential decay trend in permeability with increasing confining pressure, strongly correlated with fracture system development. Permeability also demonstrates significant heterogeneity (face cleat > butt cleat > vertical). Bright coal exhibits a greater permeability decay rate than dull coal, indicating heightened stress sensitivity, while its permeability anisotropy is weaker, aligning with the observed fracture development patterns. Full article

The Mg-8Li-3Al-0.3Si dual-phase alloy (LA83-0.3Si) was subjected to six multi-directional forging (MDF) passes in the present work, then its microstructure, mechanical properties, and work hardening and work softening effects were examined and analyzed. The results indicate that the continuous dynamic recrystallization (CDRX) mechanism of the LA83-0.3Si dual-phase alloy gradually transitioned to a discontinuous dynamic recrystallization (DDRX) mechanism as the temperature increased after MDF. This temperature change induced a transition in the basal texture from bimodal to multimodal, significantly reducing the texture intensity and weakening the alloy’s anisotropy. At 310 °C, the AlLi phase nucleated into coated particles to stabilize the structure. Additionally, the increase in the forging temperature weakened the synergistic deformation capability of the α/β phases, while the hardening behavior of the β-Li phase provided a nucleation pathway for dynamic recrystallization (DRX). MDF significantly enhanced the strength and ductility of the LA83-0.3Si alloy. The alloy’s strength continued to rise, while elongation decreased as the forging temperature increased. The ultimate tensile strength (UTS) and elongation (EL) reached 267.8 MPa and 11.9%, respectively. The work hardening effect increased with the forging temperature, whereas the work softening effect continuously diminished, attributed to the enhanced hardening behavior of the β phase and the reduced ability to transfer dislocations. Full article

This study introduces a method aimed at enhancing both the accuracy and the range of magnetic field sensors, which are two critical parameters, in a novel NiCo₂O₄-based anomalous Hall effect sensor. To fine-tune the linear range of the sensor, we introduced epitaxial strain using a MgAl₂O₄ cover layer, which significantly influenced the strain-modulated magnetic anisotropy. A NiCo₂O₄/MgAl₂O₄/NiCo₂O₄/MgAl₂O₄ heterostructure was further constructed, achieving differentiation in the material characteristics across both upper and lower NiCo₂O₄ layers through the modulation of thickness and strain. A dual-layer Hall bar was designed to enhance the integration of the sensor, offering varied detection ranges. This approach enabled the realization of ultrahigh sensitivity, measuring 10,000 V/(AT) within a ±0.1 mT range, and a competitive sensitivity of 60 V/(AT) within a ±5 mT range. By reducing the thickness of the top NiCo₂O₄ layer, an ultra-wide measurement range of ±1000 mT was also achieved. These results highlight the considerable promise of NiCo₂O₄-based anomalous Hall effect devices as compact, multi-range tools in the domain of magnetic sensing technology. Full article

The characterization of the lunar surface and subsurface through the utilization of synthetic aperture radar data has assumed a pivotal role in the domain of lunar exploration science. This investigation concentrated on the polarimetric analysis aimed at identifying water ice within a specific crater, designated Erlanger, located at the lunar north pole, which is fundamentally a region that is perpetually shaded from solar illumination. The area that is perpetually shaded on the moon is defined as that region that is never exposed to sunlight due to the moon’s slightly tilted rotational axis. These permanently shaded regions serve as cold traps for water molecules. To ascertain the presence of water ice within the designated study area, we conducted an analysis of two datasets from the Chandrayaan mission: Mini-SAR data from Chandrayaan-1 and Dual-Frequency Synthetic Aperture Radar (DFSAR) data from Chandrayaan-2. The polarimetric analysis of the Erlanger Crater, located in a permanently shadowed region of the lunar north pole, utilizes data from the Dual-Frequency Synthetic Aperture Radar (DFSAR) and the Mini-SAR. This study focuses exclusively on the L-band DFSAR data due to the unavailability of S-band data for the Erlanger Crater. The crater, identified by the PSR ID NP_869610_0287570, is of particular interest for its potential water ice deposits. The analysis employs three decomposition models—m-delta, m-chi, and m-alpha—derived from the Mini-SAR data, along with the H-A-Alpha model known as an Eigenvector and Eigenvalue model, applied to the DFSAR data. The H-A-Alpha helps in assessing the entropy and anisotropy of the lunar surface. The results reveal a correlation between the hybrid polarimetric models (m-delta, m-chi, and m-alpha) and fully polarimetric parameters (entropy, anisotropy, and alpha), suggesting that volume scattering predominates inside the crater walls, while surface and double bounce scattering are more prevalent in the right side of the crater wall and surrounding areas. Additionally, the analysis of the circular polarization ratio (CPR) from both datasets suggests the presence of water ice within and around the crater, as values greater than 1 were observed. This finding aligns with other studies indicating that the high CPR values are indicative of ice deposits in the lunar polar regions. The polarimetric analysis of the Erlanger Crater contributes to the understanding of lunar polar regions and highlights the potential for future exploration and resource utilization on the Moon. Full article

Coal is a typical dual-porosity structural material. The injection of CO₂ into coal seams has been shown to be an effective method for storing greenhouse gasses and extracting coal bed methane. In light of the theory of dual-porosity media, we investigate the impact of non-homogeneity on seepage anisotropy and examine the influence of CO₂ gas injection on the anisotropy of coal and the permeability of fractures. The results demonstrate that under constant pressure conditions, coal rock has the greatest permeability variation in the direction of face cleats and the smallest changes in the direction of vertical bedding. The more pronounced the heterogeneity, the more evident the change in permeability and the less pronounced the decreasing stage of permeability. Additionally, the larger the diffusion coefficient is, the less pronounced the permeability change. The change in permeability is inversely proportional to the size of the adsorption constant and directly proportional to the size of the fracture. As the matrix block size increases, the permeability also increases, whereas the decrease in permeability becomes less pronounced. The findings of this study offer a theoretical basis for further research into methods for enhancing the CO₂ sequestration rate. Full article

Soil hydraulic properties are mainly governed by the soil’s heterogeneity, anisotropy, and discontinuous structural characteristics, primarily when connected soil macropores characterize the structures. Therefore, researchers must document reliable hydrological models to elucidate how the soil medium affects the movement of soil water. This study, utilizing a field-scale staining tracer test, distinguishes between matrix flow and preferential flow areas in the seepage field of Xi’an loess. The Xi’an loess’s soil water characteristic curve (SWCC) was explored through field investigations and laboratory analyses. A dual-permeability model that couples matrix and macropore flow was developed using the Hydrus-2D model, enabling simulations of water migration under varying initial soil water content, rainfall intensity, and crack width. The results showed that (1) The SWCC of macropores in the preferential flow area exhibits a bimodal distribution, and the Fredlund & Xing model is applied for sectional fitting to obtain the corresponding soil water characteristic parameters. (2) Initial soil water content and rainfall intensity significantly influence water distribution, while crack width has a relatively minor effect. (3) The cumulative flux under the preferential flow is significantly higher than in the matrix area, and the wetting front depth increases with higher initial water content and rainfall intensity. This study reveals the key characteristics of preferential flow and moisture migration in the matrix zone and their influencing factors in loess. It constructs a two-domain infiltration model by integrating loess’s diverse structural characteristics and pore morphology. This model provides a theoretical basis and technical support for simulating preferential flow and studying the moisture dynamics of loess profiles. Full article

This study conducted an in-depth analysis of the landslide problem in the loess hill and gully area in northern Shaanxi Province, selecting the loess landslide site in Quchaigou, Ganquan County, Yan’an City, as the object to assess the stability of loess slopes under the conditions of different plant root densities and soil moisture contents through field investigation, physical mechanics experiments and numerical simulation of the GeoStudio model. Periploca sepium, a dominant species in the plant community, was selected to simulate the stability of loess slope soils under different root densities and soil water contents. The analysis showed that the stability coefficient of Periploca sepium natural soil root density was 1.263, which was a stable condition, but the stability of the stabilized slopes decreased with the increase in soil root density. Under the condition of 10% soil moisture content, the stability coefficient of the slope body is 1.136, which is a basic stable state, but with the increase in soil moisture content, the stability of the stable slope body decreases clearly. The results show that rainfall and human activities are the main triggering factors for loess landslides, and the vegetation root system has a dual role in landslide stability: on the one hand, it increases the soil shear strength, and on the other hand, it may promote water infiltration and reduce the shear strength. In addition, the high water-holding capacity and permeability anisotropy of loess may lead to a rapid increase in soil deadweight under rainfall conditions, increasing the risk of landslides. The results of this study are of great significance for disaster prevention and mitigation and regional planning and construction, and they also provide a reference for landslide studies in similar geological environments. Full article

Zero-index materials, characterized by near-zero permittivity and/or permeability, represent a distinctive class of materials that exhibit a range of novel physical phenomena and have potential for various advanced applications. However, conventional zero-index materials are often hindered by constraints such as narrow bandwidth and significant material loss at high frequencies. Here, we numerically demonstrate a scheme for realizing low-loss all-dielectric dual-band anisotropic zero-index materials utilizing three-dimensional terahertz silicon photonic crystals. The designed silicon photonic crystal supports dual semi-Dirac cones with linear-parabolic dispersions at two distinct frequencies, functioning as an effective double-zero material along two specific propagation directions and as an impedance-mismatched single-zero material along the orthogonal direction at the two frequencies. Highly anisotropic wave transport properties arising from the unique dispersion and extreme anisotropy are further demonstrated. Our findings not only show a novel methodology for achieving low-loss zero-index materials with expanded operational frequencies but also open up promising avenues for advanced electromagnetic wave manipulation. Full article

Eddy current inspection has been extensively employed in non-destructive testing of various conductive materials. The coil probe, as a mainstream sensor in the eddy current detection system, inevitably encounters interference from external signals while transmitting its own signal. Therefore, developing techniques to extract valuable signals from noisy ones is crucial for ensuring accurate detection. Carbon fiber composites not only possess significantly lower electrical conductivity compared to conventional metallic materials but also exhibit notable anisotropy. To address this issue, we designed an ‘8’ coil probe set where the excitation coil does not electromagnetically interfere with the detection coil. However, practical applications that require portability and miniaturization pose challenges when utilizing this coil probe set to identify carbon content or defects due to the typically weak output signal. To address this issue, this paper proposes a design that combines the ‘8’ structure of the planar coil probe with the principle of phase-locked amplification to create a dual-phase sensitive phase-locked amplification detection circuit. These specific design ideas were tested using a weak signal, which passed through the preamplifier, secondary amplifier, and band-pass filter comprising the target channel for signal amplification and noise filtering. The effective signal amplitude is proportional to the inverse phase difference between the direct current (DC) signal and inversely proportional to the amplitude of the signal. Finally, the DC signal was passed through an analog-to-digital converter (ADC). The analog-to-digital converter (A/D) is used to collect and calculate the DC signal, enabling the detection of weak electrical signals. Simulation experiments demonstrated that the signal detection circuit has an amplitude error below 0.2% and a phase error below 0.5%. The phase-locked amplification circuit designed in this paper can effectively extract the tiny impedance change signals of the planar coil sensor probe with high sensitivity and good robustness. Full article