Search Results (1,235)

As the demand for sustainable materials continues to grow, calcium caseinate (Cas) biopolymer films have emerged as promising alternatives to fossil-based plastics. However, their mechanical fragility and high-water sensitivity limit their application in packaging. In this study, we reinforced Cas films with zinc hydroxide nitrate (ZHN) using two incorporation methods: wet (ZHN-w) and dry (ZHN-d). We evaluated how each method affected the dispersion of the filler and, consequently, the functional properties of the films. To our knowledge, this is the first report of ZHN being used in biopolymeric films. Structural and morphological analyses showed better dispersion of ZHN in the wet-incorporated films. These samples exhibited a substantial increase in tensile strength, from 0.75 ± 0.00 MPa to 9.62 ± 2.45 MPa, along with a marked improvement in Young’s modulus. The films also became less soluble in water, more resistant to swelling, and structurally more cohesive. In antimicrobial tests, the ZHN-w films showed stronger inhibition against E. coli and S. aureus. Overall, this approach offers a simple and effective way to enhance protein-based films using food-safe materials, making them suitable for active and bio-based packaging applications. Full article

Background/Objectives: Adult-type diffuse gliomas, including astrocytoma and glioblastoma multiforme (GBM), are brain tumors with a very poor prognosis. While current treatment options for glioma patients are not providing satisfactory outcomes, research indicates that natural compounds could serve as alternative treatments. However, their low bioavailability requires nanotechnology solutions, such as liposomes. Methods: In this study, we propose the co-encapsulation of acteoside (ACT) with other natural compounds, cannabidiol (CBD) or naringenin (NG), in a cationic liposomal nanoformulation consisting of DOTAP and POPC lipids, which were prepared using the dry lipid film method. The liposomes were characterized by their physicochemical properties, including particle size, zeta potential, and polydispersity index (PDI), with additional analyses performed using ¹H Nuclear Magnetic Resonance (NMR). Furthermore, biological experiments were performed with U-87 MG astrocytoma and U-138 MG GBM cell lines and non-cancerous MRC-5 lung fibroblasts using the MTT assay and evaluating the expression of Bax and Bcl-xL to evaluate their potential as anticancer agents. Conclusions: The IC₅₀ values for the nanoformulations in U-138 MG cells at 48 h were 6 µM for ACT + CBD and 5 µM for ACT + NG. ACT and CBD or NG demonstrated a potential synergistic effect against GBM in a liposomal formulation. Notably, treatment with ACT + CBD (5 µM) and ACT + NG (5 µM) liposomal formulations significantly upregulated Bax protein level in U-138 cells at both 24 and 48 h. In parallel, ACT + CBD (5 µM) also modulated Bcl-xL protein level in both U-138 MG and U-87 MG cell lines at the same time points. The obtained nanoformulations were homogeneous and stable for 21 days, evidenced by a narrow particle size distribution, a low polydispersity index (PDI) < 0.3, and a positive zeta potential. Full article

This study investigates the thermal stability and microstructural evolution of the solid electrolyte medium used in DLyte^® dry electropolishing and dry anodizing processes. Samples were thermally aged between 30 °C and 45 °C to simulate Joule heating during industrial operation. Visual and SEM analyses revealed shape deformation and microcrack formation at temperatures above 40 °C, potentially reducing particle packing efficiency and electrolyte performance. Particle size distribution shifted from bimodal to trimodal upon aging, with an overall size reduction of up to 39.5% due to dehydration effects, impacting ionic transport properties. Weight-loss measurements indicated a diffusion-limited dehydration mechanism, stabilizing at 15–16% mass loss. Fourier transform infrared analysis confirmed water removal while maintaining the essential sulfonic acid groups responsible for ionic conductivity. In dry anodizing tests on titanium, aged electrolytes enhanced process efficiency, producing TiO₂ films with improved optical properties—color and brightness—while preserving thickness and uniformity (~70 nm). The results highlight the need to carefully control thermal exposure to maintain electrolyte integrity and ensure consistent process performance. Full article

Kefiran, the extracellular polysaccharide produced from the Generally Recognized as Safe (GRAS) bacteria in kefir grains, with its well-documented functional and health-promoting properties, constitutes a promising biopolymer with a variety of possible uses. Its compatibility with other biopolymers, such as milk proteins, and its ability to form standalone cryogels allow it to be utilized for the fabrication of films with improved properties for applications in the food and biomedical–pharmaceutical industries. In the present work, the properties of kefiran films were investigated in the presence of milk proteins (sodium caseinate, native and heat-treated whey proteins, and their mixtures), alongside glycerol (as a plasticizer) and cryo-treatment of the film-forming solution prior to drying. A total of 24 kefiran films were fabricated and studied for their physical (thickness, moisture content, water solubility, color parameters and vapor adsorption), mechanical (tensile strength and elongation at break), and optical properties. Milk proteins increased film thickness, solubility and tensile strength and reduced water vapor adsorption. The hygroscopic effect of glycerol was mitigated in the presence of milk proteins and/or the application of cryo-treatment. Glycerol was the most effective at reducing the films’ opacity. Heat treatment of whey proteins proved to be the most effective in increasing film tensile strength, reducing, at the same time, the elongation at break, while sodium caseinates in combination with cryo-treatment resulted in films with high tensile strength and the highest elongation at break. Cryo-treatment, carried out in the present study through freezing followed by gradual thawing of the film-forming solution, proved to be the most effective factor in decreasing film roughness. Based on our results, proper selection of the film-forming solution composition and its treatment prior to drying can result in kefiran–glycerol films with favorable properties for particular applications. Full article

The rising demand for sustainable protein is driving interest in insects as a raw material for advanced food ingredients. This review collates and critically analyses over 300 studies on the conversion of crickets, mealworms, black soldier flies, and other farmed species into powders, protein isolates, oils, and chitosan-rich fibers with targeted techno-functional roles. This survey maps how thermal pre-treatments, blanch–dry–mill routes, enzymatic hydrolysis, and isoelectric solubilization–precipitation preserve or enhance the water- and oil-holding capacity, emulsification, foaming, and gelation, while also mitigating off-flavors, allergenicity, and microbial risks. A meta-analysis shows insect flours can absorb up to 3.2 g of water g⁻¹, stabilize oil-in-water emulsions for 14 days at 4 °C, and form gels with 180 kPa strength, outperforming or matching eggs, soy, or whey in specific applications. Case studies demonstrate a successful incorporation at 5–15% into bakery, meat analogs and dairy alternatives without sensory penalties, and chitin-derived chitosan films extend the bread shelf life by three days. Comparative life-cycle data indicate 45–80% lower greenhouse gas emissions and land use than equivalent animal-derived ingredients. Collectively, the evidence positions insect-based ingredients as versatile, safe, and climate-smart tools to enhance food quality and sustainability, while outlining research gaps in allergen mitigation, consumer acceptance, and regulatory harmonization. Full article

Topical drug administration is a common method of delivering medications to the eye to treat various ocular conditions, including glaucoma, dry eye, and inflammation. Drug efficacy following topical administration, including the drug’s distribution within the eye, absorption and elimination rates, and physiological responses can be predicted using physiologically based pharmacokinetic (PBPK) modeling. High-resolution computational models of the eye are desirable to improve simulations of drug delivery; however, these approaches can have long run times. In this study, a fast-running computational quasi-3D (Q3D) model of the human tear film was developed to account for absorption, blinking, drainage, and evaporation. Visualization of blinking mechanics and flow distributions throughout the tear film were enabled using this Q3D approach. Average drug absorption throughout the tear film subregions was quantified using a high-resolution compartment model based on a system of ordinary differential equations (ODEs). Simulations were validated by comparing them with experimental data from topical administration of 0.1% dexamethasone suspension in the tear film (R² = 0.76, RMSE = 8.7, AARD = 28.8%). Overall, the Q3D tear film model accounts for critical mechanistic factors (e.g., blinking and drainage) not previously included in fast-running models. Further, this work demonstrated methods toward improved computational efficiency, where central processing unit (CPU) time was decreased while maintaining accuracy. Building upon this work, this Q3D approach applied to the tear film will allow for more seamless integration into full-body models, which will be an extremely valuable tool in the development of treatments for ocular conditions. Full article

Optimisation of the anti-skid properties of tyres is a significant area of composite applications. For investigating the wet slip friction characteristics, the wet slip friction test of tread rubber and road surface was carried out using the comprehensive tire friction testing machine. The wet slip properties of different formulated rubbers under various working conditions such as different slip speeds, water film thicknesses and vertical loads were compared through the test. Subsequently, an orthogonal test programme was designed to investigate the degree of significant influence of each factor on the wet slip performance. A three-dimensional finite element model of tread rubber and road surface with water film was established in order to facilitate analysis of the wet slip properties. The simulation results were utilised to elucidate the pattern of the effects of different loads on the wet slip friction characteristics. Results indicate that the wet slip friction coefficient is subject to decrease in proportion to the magnitude of the vertical load; the friction coefficient of rubber block in wet slip condition exhibits a decline of approximately 26% in comparison with that of dry condition; the factor that exerts the most significant influence on the coefficient of friction is the vertical load, while the water film thickness exerts the least influence. The results obtained can serve as a reference source for the design of tire anti-skid performance enhancement. Full article

Background and Objectives: To clinically validate a semi-automatic measurement of Tear Meniscus Central Area (TMCA) to differentiate between Non-Aqueous Deficient Dry Eye (Non-ADDE) and Aqueous Deficient Dry Eye (ADDE) patients. Materials and Methods: 120 volunteer participants were included in the study. Following TFOS DEWS II diagnostic criteria, a battery of tests was conducted for dry eye diagnosis: Ocular Surface Disease Index questionnaire, tear film osmolarity, tear film break-up time, and corneal staining. Additionally, lower tear meniscus videos were captured with Tearscope illumination and, separately, with fluorescein using slit-lamp blue light and a yellow filter. Tear meniscus height was measured from Tearscope videos to differentiate Non-ADDE from ADDE participants, while TMCA was obtained from fluorescein videos. Both parameters were analyzed using the open-source software NIH ImageJ. Results: Receiver Operating Characteristics analysis showed that semi-automatic TMCA evaluation had significant diagnostic capability to differentiate between Non-ADDE and ADDE participants, with an optimal cut-off value to differentiate between the two groups of 54.62 mm² (Area Under the Curve = 0.714 ± 0.051, p < 0.001; specificity: 71.7%; sensitivity: 68.9%). Conclusions: The semi-automatic TMCA evaluation showed preliminary valuable results as a diagnostic tool for distinguishing between ADDE and Non-ADDE individuals. Full article

Melissa officinalis L. (Lamiaceae) is a perennial plant species widely used in the pharmaceutical and food industries, particularly valued for its sedative properties. This study investigates the impact of synthetic mulch film and planting density as two experimental factors on agronomic performance, raw material quality, and economic efficiency in lemon balm production. The experiment was conducted at three locations in Serbia (L1: Bačko Novo Selo, L2: Bavanište, L3: Vilandrica) from 2022 to 2024, using two planting densities on synthetic mulch film (F1: 8.3 plants m⁻²; F2: 11.4 plants m⁻²) and a control treatment without mulch (C). The synthetic mulch film used was a synthetic black polypropylene film (Agritela Black, 90 g/m²), uniformly applied in strips across the cultivation area, covering approximately 78% of the soil surface. The results showed consistent increases in morphological parameters and yield across the years. Plant height in F1 and F2 treatments ranged from 65 to 75 cm, while in the control it reached up to 50 cm (2022–2024). Fresh biomass yield varied from 13.4 g per plant (C) to 378.08 g per plant (F2), and dry biomass yield from 60.3 g (C) to 125.4 g (F2). The highest essential oil content was observed in F2 (1.2% in 2022), while the control remained at 0.8%. The F2 treatment achieved complete weed suppression throughout the experiment without the use of herbicides, demonstrating both agronomic and ecological advantages. Economic evaluation revealed that F2 generated the highest cumulative profit (€142,164.5) compared to the control (€65,555.3). Despite higher initial investment, F2 had the most favorable cost–benefit ratio in the long term. This study highlights the crucial influence of mulching and planting density on optimizing lemon balm production across diverse climatic and soil conditions, while also underscoring the importance of sustainable, non-chemical weed management strategies in lemon balm cultivation. Full article

The quality effects of spectral irradiance conditions during papaya (Carica papaya L.) drying were investigated using three different dryers: a solar dryer with dynamic irradiance control (SDIC), a cylindrical solar dryer (CSD), and a solar simulator dryer (SSD). This study builds upon previous PDLC film applications in solar drying by specifically examining its impact on phytochemical preservation and color degradation, addressing gaps in spectral-specific effects on food quality parameters. The drying conditions were as follows: a temperature of 50 °C for each method, 700 w/m² for both SDIC and solar simulator dryers (SSD), and full solar irradiance for the cylindrical solar dryer (CSD). The cylindrical solar dryer exhibited 210 min of drying time due to higher solar irradiance than SDIC (300 min), while SSD lasted 180 min. Drying rates were highest for CSD (0.056 g H₂O/g d.m. min⁻¹), followed by SDIC (0.027 g H₂O/g d.m. min⁻¹). Color analysis revealed that CSD resulted in the most significant color degradation, followed by SSD and SDIC. This was attributed to the varying spectral composition of radiation in each method. The CSD, with a full solar spectrum, including higher UV and visible radiation, induced more pronounced color changes than SDIC, which received lower intensity radiation in these ranges. Chemical analyses showed that SSD samples had the highest antioxidant activity (1432.91 µmol TE/g dw by ABTS) and phenolic content (58.92 mg GAE/100 g), suggesting simulated conditions may better preserve certain phytochemicals. SDIC maintained better carotenoid-related color parameters while showing intermediate antioxidant levels (1084.09 µmol TE/g dw). These results demonstrate that irradiance control significantly impacts drying efficiency and quality parameters. Full article

Tear film alterations are commonly associated with ocular pathology. The tear film plays a vital role in maintaining the optical properties of the cornea and contains essential elements required for healing and preserving the integrity of the ocular surface. As a biological fluid, the tear film is easily collected using non-invasive techniques, making it a promising candidate for analysis and often referred to as an ideal biofluid. Several studies have attempted to identify biomarkers in the tear film that could be linked to systemic or ocular disorders, with the goal of developing tools for diagnosis or even early prevention. The quality and quantity of the tear film are influenced by hormonal status, emotional experiences related to social and familial events, and the work environment. Systemic disorders are often reflected at the ocular level through alterations in the tear film. Obesity is a well-recognized public health concern, extensively studied and investigated, much like other common systemic conditions. The presence of low-grade, chronic inflammation associated with excess body weight has been validated in several studies. The strategies for preventing obesity induced dry eye disease are based on regular physical activity, maintaining adequate hydration through sufficient fluid intake, weight loss, and the supplementation of essential fatty acids. This narrative literature review aims to highlight the tear film alterations associated with obesity. The article is intended for ophthalmologists, general practitioners, nutritionists, and researchers. Full article

This study investigated the effects of macronutrient type and concentration on the biomass yield and biochemical composition of hydroponically grown wheat sprouts (HWS), with the aim of identifying fertilization strategies that optimize both productivity and feed quality. HWS were cultivated using a nutrient film technique over a 7-day period under controlled environmental conditions, with treatments including calcium nitrate (CN1–CN3), potassium phosphate (CP1–CP3), potassium sulfate (CK1–CK2), and a balanced NPK 20–20–20 fertilizer (NPK1–NPK3), each applied at three increasing concentrations. The quantitative parameters assessed included biomass yield per unit of dry seed (DP, kg kg⁻¹) and dry matter content (DM, %), while qualitative traits included crude protein (CP), ether extract (EE), crude fiber (CF), and ash content. Results indicated that balanced NPK fertilization significantly enhanced performance, with NPK3 achieving the highest biomass yield (6.39 kg kg⁻¹), CP (24.26%), CF (5.63%), and ash (16.0%) content. In contrast, CN3 treatments reduced yield (4.84 kg kg⁻¹) despite increasing CP (19.65%), indicating trade-offs between nitrogen enrichment and vegetative expansion. Phosphorus-based treatments (CP2–CP3) improved nutrient density without suppressing yield. Regression analyses revealed strong correlations between DM and both CF (R² = 0.81) and ash (R² = 0.71), supporting their utility as indirect indicators of feed quality. EE content remained stable (2.07–2.67%) across all treatments, suggesting its limited responsiveness to macronutrient manipulation. These findings highlight the importance of nutrient synergy in hydroponic systems and provide a practical framework for tailoring fertilization regimes to meet specific agronomic and nutritional objectives in precision livestock feeding and provide practical guidance for optimizing hydroponic livestock feed production. Full article

The friction surfacing (FS) process has emerged over the past few years as a method for joining both similar and dissimilar materials, for volume damage repair of defective components, and for corrosion protection. The possibility to produce a metallic coating by FS, without melting the material, classifies this technique as distinct from other standard methods. This unconventional deposition method is based on the severe plastic deformation that appears on a rotating metallic rod (consumable material) pressed against the substrate under an axial load. The present study aims to investigate the tribological properties and corrosion resistance provided by the aluminum-based FS coatings deposited onto a structural S235 steel substrate and further modified by plasma electrolytic oxidation (PEO). During the PEO treatment, the formation of a ceramic film is enabled, while the hardness, chemical stability, corrosion, and wear resistance of the modified surfaces are considerably increased. The morpho-structural characteristics and chemical composition of the PEO-modified FS coatings are further investigated using scanning electron microscopy combined with energy dispersive spectroscopy analysis and X-ray diffraction. Dry sliding wear testing of the PEO-modified aluminum-based coatings was carried out using a ball-on-disc configuration, while the corrosion resistance was electrochemically evaluated in a 3.5 wt.% NaCl solution. The corrosion rates of the aluminum-based coatings decreased significantly when the PEO treatment was applied, while the wear rate was substantially reduced compared to the untreated aluminum-based coating and steel substrate, respectively. Full article

Incorporating probiotics into edible films offers an effective strategy for delivering viable microorganisms to the body. This study aimed to develop edible films based on three types of pregelatinized cassava starch—pregelatinized native starch (PNS), hydroxypropyl distarch phosphate (HDP), and hydroxypropyl starch (HS)—as carriers for Bacillus coagulans (BC). The interactions between probiotic powder and the polymer matrix, as well as the viability of B. coagulans during film drying and subsequent storage, were evaluated to assess the effectiveness of the films as protective delivery systems at room temperature (25 °C). The addition of BC altered the amorphous-to-ordered structure of the starch matrices. Surface morphology analysis showed BC aggregates on PNS films, whereas HDP and HS films retained smooth surfaces. Incorporation of BC increased the tensile strength and Young’s modulus of PNS films but reduced their elongation at break. Additionally, BC decreased both the light transmittance and water contact angle in PNS films, while 1% BC increased the contact angle in HDP and HS films. BC had no significant effect on the solubility of PNS films but enhanced the solubility of HDP and HS films. Notably, B. coagulans maintained viability around 8 log CFU/g after 90 days of storage at room temperature, supporting the potential of pregelatinized starch-based films as effective probiotic carriers. Full article

Dry eye disease (DED) is a hallmark of primary Sjögren’s disease (SjD) and often resists conventional treatments like lubricant eye drops. Insulin nanoemulsions offer a potential solution by improving drug penetration and retention on the ocular surface. In animal models, insulin has shown benefits in promoting tear secretion and corneal healing. This study evaluated the safety and efficacy of insulin nanoemulsion eye drops (20 IU/mL, three times daily for 30 days) in patients with SjD. Thirty-two patients were randomized in a double-masked design to receive either insulin or placebo drops. Symptoms (assessed by OSDI questionnaire) and objective measures (tear film breakup time, corneal and conjunctival staining, and Schirmer Test) were recorded at baseline, after 4 weeks of treatment, and at a 4-week follow-up. Twenty-three participants completed the study. Both groups showed significant improvement in symptoms and objective signs after treatment (p < 0.05), but no significant differences were found between the insulin and placebo groups. No clinically relevant adverse effects were reported. Insulin nanoemulsion eye drops are safe for SjD patients, but their therapeutic advantage remains unclear. Further studies with larger samples, extended follow-up, and dose adjustments are needed to better understand their potential. Full article