Search Results (20)

This paper proposes a source encoding rate control and cross-layer data stream allocation scheme for uplink millimeter-wave (mmWave) multi-user massive MIMO (MU-mMIMO) orthogonal frequency division multiplexing (OFDM) hybrid beamforming video communication systems. Unlike most previous studies that focus on the downlink scenario, our proposed scheme optimizes the uplink transmission while also addressing the limitation of prior works that only consider single-data-stream users. A key distinction of our approach is the integration of cross-layer resource allocation, which jointly considers both the physical layer channel state information (CSI) and the application layer video rate-distortion (RD) function. While traditional methods optimize for spectral efficiency (SE), our proposed method directly maximizes the peak signal-to-noise ratio (PSNR) to enhance video quality, aligning with the growing demand for high-quality video communication. We introduce a novel iterative cross-layer dynamic data stream allocation scheme, where the initial allocation is based on conventional physical-layer data stream allocation, followed by iterative refinement. Through multiple iterations, users with lower PSNR can dynamically contend for data streams, leading to a more balanced and optimized resource allocation. Our approach is a general framework that can incorporate any existing physical-layer data stream allocation as an initialization step before iteration. Simulation results demonstrate that the proposed cross-layer scheme outperforms three conventional physical-layer schemes by 0.4 to 1.14 dB in PSNR for 4–6 users, at the cost of a 1.8 to 2.3× increase in computational complexity (requiring 3.6–5.8 iterations). Full article

In modern (5G) and future Multi-User (MU) wireless communication systems Beyond 5G (B5G) using Multiple-Input Multiple-Output (MIMO) technology, base stations with a large number of antennas communicate with many mobile stations. This technology is becoming especially relevant in modern multi-user wireless sensor networks in various application scenarios. The problem of organizing an MU mode on the downlink has arisen, which can be solved by precoding at the Base Station (BS) without using additional channel frequency–time resources. In order to utilize an efficient precoding algorithm at the base station, full Channel State Information (CSI) is needed for each mobile station. Transmitting this information for massive MIMO systems normally requires the allocation of high-speed channel resources for the feedback. With limited feedback, reduced information (partial CSI) is used, for example, the codeword from the codebook that is closest to the estimated channel vector (or matrix). Incomplete (or inaccurate) CSI causes interference from the signals, transmitted to neighboring mobile stations, that ultimately results in a decrease in the number of active users served. In this paper, we propose a new downlink precoding approach for MU-MIMO systems that also uses codebooks to reduce the information transmitted over a feedback channel. A key aspect of the proposed approach, in contrast to the existing ones, is the transmission of new, uncorrelated information in each cycle, which allows for accumulating CSI with higher accuracy without increasing the feedback overhead. The proposed approach is most effective in systems with dynamic user selection. In such systems, increasing the accuracy of CSI leads to an increase in the number of active users served, which after a few cycles, can reach a maximum value determined by the number of transmit antennas at the BS side. This approach appears to be promising for addressing the challenges associated with current and future massive MIMO systems, as evidenced by our statistical simulation results. Various methods for extracting and transmitting such uncorrelated information over a feedback channel are considered. In many known publications, the precoder, codebooks, CSI estimation methods and other aspects of CSI transmission over a feedback channel are separately optimized, but a comprehensive approach to jointly solving these problems has not yet been developed. In our paper, we propose to fill this gap by combining a new approach of precoding and CSI estimation with CSI accumulation and transmission over a feedback channel. Full article

We focus on an integrated sensing and communication (ISAC) system—a single platform equipped with multiple antennas transmitting a waveform to detect targets and communicate with downlink users. Due to spectrum sharing between multiple-input–multiple-output (MIMO) radar and multiuser MIMO (MU-MIMO) communication, beamforming is becoming increasingly important as a technique that enables the creation of directional beams. In this paper, we propose a novel joint transmit beamforming design scheme that employs a beam pattern approximation strategy for radar sensing and utilizes rate-splitting for multiuser communication offering advanced interference management strategies. The optimization problems are formulated from both radar-centric and trade-off viewpoints. First, we propose a radar-centric beamforming scheme to achieve sensing efficiency through beam pattern approximation, while requiring the fairness signal-to-interference-plus-noise ratio (SINR) to be higher than a given threshold to guarantee a minimal level of communication quality, while the obtained performance for the communication system is limited in this scheme. To address this problem, we propose a beamforming design scheme from a trade-off viewpoint that flexibly optimizes both sensing and communication performances with a regularization parameter. Finally, we propose a partial rate-splitting-based beamforming design method aimed at maximizing the effective sensing power, with the constraint of a minimal sum rate for downlink users. Numerical results are provided to assess the effectiveness of all proposed schemes. Full article

The practical implementation of massive multi-user multi-input–multi-output (MU-MIMO) downlink communication systems power amplifiers that are energy efficient; otherwise, the power consumption of the base station (BS) will be prohibitive. Constant envelope (CE) precoding is gaining increasing interest for its capability to utilize low-cost, high-efficiency nonlinear radio frequency amplifiers. Our work focuses on the topic of CE precoding in massive MU-MIMO systems and presents an efficient CE precoding algorithm. This algorithm uses an alternating minimization (AltMin) framework to optimize the CE precoded signal and precoding factor, aiming to minimize the difference between the received signal and the transmit symbol. For the optimization of the CE precoded signal, we provide a powerful approach that integrates the majorization-minimization (MM) method and the fast iterative shrinkage-thresholding (FISTA) method. This algorithm combines the characteristics of the massive MU-MIMO channel with the second-order Taylor expansion to construct the surrogate function in the MM method, in which minimizing this surrogate function is the worst-case of the system. Specifically, we expand the suggested CE precoding algorithm to involve the discrete constant envelope (DCE) precoding case. In addition, we thoroughly examine the exact property, convergence, and computational complexity of the proposed algorithm. Simulation results demonstrate that the proposed CE precoding algorithm can achievean uncoded biterror rate (BER) performance gain of roughly $1\mathrm{dB}$ compared to the existing CE precoding algorithm and has an acceptable computational complexity. This performance advantage also exists when it comes to DCE precoding. Full article

Photon counting has been proven to possess excellent signal detection capabilities at low power levels and has extensive potential applications in sixth-generation (6G) communications. However, the inherent dependency between the signal and noise complicates system analysis, and optimizing achievable rates in photon-counting visible light communication (VLC) systems remains unresolved. This paper introduces a new method aimed at minimizing multi-user interference (MUI) through a zero-forcing (ZF) scheme and maximizing the weighted sum rate of the proposed downlink multi-user photon-counting multiple-input multiple-output (MU-PhC-MIMO) VLC system by solving an optimization problem. The key point lies in our utilization of the ZF approach to derive a reasonable asymptotic approximation expression for the weighted sum rate. Subsequently, we use variable substitution and methods like successive convex approximation (SCA) to iteratively convexify the non-convex optimization problem and maximize the weighted sum rate under the ZF form. Compared to other algorithms, this approach can save 2.5 dB of transmission power to achieve the same system-weighted sum rate and significantly outperforms the repetition coding scheme at sufficient transmission power. Full article

This paper presents two precoding techniques for a reconfigurable intelligent surface (RIS)-assisted multi-user (MU) multiple-input multiple-output (MIMO) double quadrature spatial modulation (DQSM) downlink transmission system. Instead of being applied at the remote RIS, the phase shift vector is applied at the base station (BS) by using a double precoding stage. Results show that the proposed RIS-MU-MIMO-DQSM system has gains of up to 17 dB in terms of bit error rate (BER) and a reduction in detection complexity of 51% when compared with the conventional MU-MIMO system based on quadrature amplitude modulation (QAM). Compared with a similar system based on amplify and forward (AF) relay-assisted technique, the proposed system has a gain of up to 18 dB in terms of BER under the same conditions and parameters. Full article

Advances in higher-end spectrum utilization has enabled user equipment to dock multiple antenna elements, and hence make use of selectivity via equalization in new generation of mobile networks. The equalization can exploit channel statistics to shape covariance matrices, and hence improve network performance at the physical layer of these networks by projecting segregated signals to non-overlapping subspaces. We propose to establish the promise of covariance shaping method by incorporating the equalizers in the modelling of a downlink multi-user multiple-input multiple-output (MU-MIMO) systems and thereby characterizing a key performance indicator, namely, the sum ergodic capacity. This is achieved by utilizing a residue theory approach which can account for indefinite eigenvalues. The system modelling is generic in a sense that it requires the base station (BS) to only have second order statistics of the channel rather than instantaneous knowledge. Furthermore, the BS incorporates a transmit beamformer design to enhance the ergodic capacity and feedforward the information of covariance shaping equalizers. Search method for transmit beamforming is also proposed which shows a promising three fold increase in sum ergodic capacity at signal-to-noise ratio of 10 dB for the considered MU-MIMO system. Proposed characterization of the system is authenticated using simulation means, and a comparative analysis of transmit beamformer designs on the sum ergodic rate is showcased. Full article

To improve the performance of IEEE 802.11 wireless local area (WLAN) networks, different frame-aggregation algorithms are proposed by IEEE 802.11n/ac standards to improve the throughput performance of WLANs. However, this improvement will also have a related cost in terms of increasing delay. The traffic load generated by mixed types of applications in current modern networks demands different network performance requirements in terms of maintaining some form of an optimal trade-off between maximizing throughput and minimizing delay. However, the majority of existing researchers have only attempted to optimize either one (to maximize throughput or minimize the delay). Both the performance of throughput and delay can be affected by several factors such as a heterogeneous traffic pattern, target aggregate frame size, channel condition, competing stations, etc. However, under the effect of uncertain conditions of heterogeneous traffic patterns and channel conditions in a network, determining the optimal target aggregate frame size is a significant approach that can be controlled to manage both throughput and delay. The main contribution of this study was to propose an adaptive aggregation algorithm that allows an adaptive optimal trade-off between maximizing system throughput and minimizing system delay in the WLAN downlink MU-MIMO channel. The proposed approach adopted different aggregation policies to adaptively select the optimal aggregation policy that allowed for achieving maximum system throughput by minimizing delay. Both queue delay and transmission delay, which have a significant impact when frame-aggregation algorithms are adopted, were considered. Different test case scenarios were considered such as channel error, traffic pattern, and number of competing stations. Through system-level simulation, the performance of the proposed approach was validated over the FIFO aggregation algorithm and earlier adaptive aggregation approaches, which only focused on achieving maximum throughput at the expense of delay. The performance of the proposed approach was evaluated under the effects of heterogenous traffic patterns for VoIP and video traffic applications, channel conditions, and number of STAs for WLAN downlink MU-MIMO channels. Full article

This article deals with the analysis of the multi-cell association setup, and it exploits the possibility of enhancing coverage in the envisioned sixth generation (6G) large-scale cellular networks. Specifically, we propose a simple, effective approach for finding a closed-form solution to the coverage probability of a given user in a multi-cell association regime of downlink multiple-user multiple-input multiple-output (MU-MIMO) systems. In particular, a Rayleigh fading channel is considered, wherein the transmitter has only the knowledge of the second-order statistics of the channel. The proposed work uses an indefinite quadratic formulation method and thereby investigates the effect of cell association in a correlated downlink broadcast channel with co-channel interference, additive white noise, and multiple transceiver antenna elements. In the results, we show that a predefined signal-to-interference-plus-noise ratio (SINR) threshold dictates an effective multi-cell association setup, and we identify the region in which a multi-cell association performs better that a single association-based network. The derived theoretical expressions in this paper are validated by the same means of simulation. Full article

To solve the energy efficiency (EE) optimization in a multi-cell (MU) massive multiple-input multiple-output (MIMO) downlink system, of which channels are of symmetry in the Time-Division Duplex (TDD) protocol, we utilize a spatially correlated channel model and adopt the minimum mean-squared error (MMSE) estimator to tailor linear precoding vectors. Then, we derive the expression of downlink spectral efficiency (SE), taking interference into account. Subsequently, we establish the EE optimization function, which is defined as the average capacity divided by power consumption. In an interference-limited scenario, the EE optimization is of high complexity to solve globally as it is not jointly concave. To this end, we propose the Dinkelbach-like power allocation algorithm to obtain a suboptimal solution. We transform the EE problem in a fractional form into a subtractive optimization form called an auxiliary subproblem. Then, we relax the sub-problem to a concave problem by initializing the interference and omitting the dynamic power term about throughput. Lastly, we solve iteratively the Karush–Kuhn–Tucker (KKT) conditions by bisection search. Consequently, we obtain a sub-solution with modest complexity. The simulation results justify the rationality of the Dinkelbach-like algorithm and demonstrate that the proposal outperforms the reference schemes and effectively improves the performance metrics EE and SE. Full article

This paper investigates an adaptive frame aggregation technique in the medium access control (MAC) layer for the Wireless Local Area Network (WALN) downlink Multi-User–Multiple-In Multiple-Out (MU-MIMO) channel. In tackling the challenges of heterogeneous traffic demand among spatial streams, we proposed a new adaptive aggregation algorithm which has a superior performance over the baseline First-in–First-Out (FIFO) scheme in terms of system throughput performance and channel utilization. However, this earlier work does not consider the effects of wireless channel error. In addressing the limitations of this work, this study contributes an enhanced version of the earlier model considering the effect of channel error. In this approach, a dynamic adaptive aggregation selection scheme is proposed by employing novel criteria for selecting the optimal aggregation policy in WLAN downlink MU-MIMO channel. Two simulation setups are conducted to achieve this approach. The simulation setup in Step 1 performs the dynamic optimal aggregation policy selection strategy as per the channel condition, traffic pattern, and number of stations in the network. Step 2 then performed the optimal wireless frame construction that would be transmitted in the wireless channel in adopting the optimal aggregation policy obtained from Step 1 that maximizes the system performance. The proposed adaptive algorithm not only achieve the optimal system throughput in minimizing wasted space channel time but also provide a good performance under the effects of different channel conditions, different traffic models such as Pareto, Weibull, and fBM, and number of users using the traffic mix of VoIP and video data. Through system-level simulation, our results again show the superior performance of our proposed aggregation mechanism in terms of system throughput performance and space channel time compared to the baseline FIFO aggregation approach. Full article

In this paper, an unmanned aerial vehicle (UAV)-aided multi-antenna configured downlink mmWave cooperative generalized frequency division multiplexing (GFDM) system is proposed. To provide physical layer security (PLS), a 3D controlled Lorenz mapping system is introduced. Furthermore, the combination of T-transformation spreading codes, walsh Hadamard transform, and discrete Fourier transform (DFT) techniques are integrated with a novel linear multi-user multiple-input multiple-output (MU-MIMO) gyre precoding (GP) for multi-user interference reduction. Furthermore, concatenated channel-coding with multi-user beamforming weighting-aided maximum-likelihood and zero forcing (ZF) signal detection schemes for an improved bit error rate (BER) are also used. The system is then simulated with a single base station (BS), eight massive machine-type communications (mMTC) users, and two UAV relay stations (RSs). Numerical results reveal the robustness of the proposed system in terms of PLS and an achievable ergodic rate with signal-to-interference-plus-noise ratio (SINR) under the implementation of T-transformation scheme. By incorporating the 3D mobility model, brownian perturbations of the UAVs are also analyzed. An out-of-band (OOB) reduction of 320 dB with an improved BER of $1\times {10}^{-4}$ in 16-QAM for a signal-to-noise ratio, $E_b/N_0$, of 20 dB is achieved. Full article

Hybrid precoding is an attractive technique in MU-MIMO systems with significantly reduced hardware costs. However, it still requires a complex analog network to connect the RF chains and antennas. In this paper, we develop a novel hybrid precoding structure for the downlink transmission with a compact RF structure. Specifically, the proposed structure relies on domestic connections instead of global connections to link RF chains and antennas. Fixed-degree phase shifters provide candidate signals, and simple on-off switches are used to route the signal to antennas, thus RF adders are no longer required. Baseband zero forcing and block diagonalization are used to cancel interference for single-antenna and multiple-antenna users, respectively. We formulate how to design the RF precoder by optimizing the probability distribution through cross-entropy minimization which originated in machine learning. To optimize the energy efficiency, we use the fractional programming technique and exploit the Dinkelbach method-based framework to optimize the number of active antennas. Simulation results show that proposed algorithms can yield significant advantages under different configurations. Full article

The normal operations of radar systems and communication systems under the condition of spectrum coexistence are facing a huge challenge. This paper uses game theory to study power allocation problems between multistatic multiple-input multiple-output (MIMO) radars and downlink communication. In the case of spectrum coexistence, radars, base station (BS) and multi-user (MU) have the working state of receiving and transmitting signals, which can cause unnecessary interferences to different systems. Therefore, when they work together, they should try to suppress mutual interferences. Firstly, the signal from BS is considered as interference when radar detects and tracks targets. A supermodular power allocation game (PAG) model is established and the existence and uniqueness of the Nash equilibrium (NE) in this game are proved. In addition, the power allocation problem from BS to MU is also analyzed, and two Stackelberg PAG models are constructed. It is proved that the NE of each game exists and is unique. Simultaneously, two Stackelberg power allocation iterative algorithms converge to the NEs. Finally, numerical results verify the convergence of the proposed PAG algorithms. Full article

A transmit antenna selection (TxAS) aided multi-user multiple-input multiple-output (MU-MIMO) system is proposed for operating in the MIMO downlink channel environments, which shows significant improvement in terms of higher data rate when compared to the conventional MU-MIMO systems operating without adopting TxAS, while maintaining low hardware costs. We opt for employing a simple yet efficient zero-forcing beamforming (ZFBF) linear precoding scheme at the transmitter in order to reduce the decoding complexity when considering users’ side. Moreover, considering that users within the same cell may require various qualities of service (QoS), we further propose a novel user-oriented smart TxAS (UOSTxAS) scheme, of which the main idea is to carry out AS based on the QoS requirements of different users. At last, we implement the proposed UOSTxAS scheme in the software defined radio (SDR) MIMO communication hardware platform, which is the first prototype hardware system that runs the UOSTxAS MU-MIMO scheme. Our results show that, by employing TxAS, the proposed UOSTxAS scheme is capable of offering higher data rates for priority users, while reasonably ensuring the performance of the common users requiring lower rates both in simulation and in the implemented SDR MIMO communication platform. Full article