Search Results (9,708)

Nanoscopic quantum dots exhibit discrete energy spectra and size- and shape-dependent thermal properties that cannot always be adequately described within the conventional Boltzmann–Gibbs statistical framework. In systems with strong confinement, finite size, and reduced symmetry, deviations from extensivity may emerge, affecting the occupation of energy levels and the resulting thermodynamic response. In this context, this work elucidates how GaAs quantum dot geometry, external electric fields, and nonextensive statistical effects jointly influence the thermal response of quantum dots with different geometries—cubic, cylindrical, ellipsoidal, and pyramidal. These energy levels are calculated by solving the Schrödinger equation under the effective mass approximation, employing the finite element method for numerical computation. These energy levels are then incorporated into an iterative numerical procedure to calculate the specific heat for different values of the nonextensivity parameter, thereby enabling exploration of both extensive (Boltzmann–Gibbs) and nonextensive regimes. The results demonstrate that the shape of the quantum dots strongly influences the energy spectrum and, consequently, the thermal properties, producing distinctive features such as Schottky-type anomalies and geometry-dependent shifts under an external electric field. In subextensive regimes, a discrete behavior in the specific heat emerges due to natural cutoffs in the accessible energy states. In contrast, in superextensive regimes, a smooth, saturation-like behavior is observed. These findings highlight the importance of geometry, external-field effects, and nonextensive statistics as complementary tools for tailoring the energy distribution and thermal response in nanoscopic quantum systems. Full article

Energy harvesting systems face performance limitations, and existing optimizations are not always sufficient; this study addresses these gaps by enhancing piezoelectric energy systems. To improve the performance of piezoelectric energy harvesting systems, an optimization methodology is developed in this study. Since the mechanical strain distribution directly affects energy conversion efficiency, this issue is addressed through optimization of the thickness geometry of a common cantilever-type harvester elastic substrate element via a state-space gradient projection method combined with design sensitivity analysis. The gradient projection method is implemented in MATLAB R2024b software to determine the optimal elastic substrate design, after which the optimized design is simulated in COMSOL 6.3 Multiphysics for strain analysis in a transient study. The optimized cantilever designs are produced by 3D printing using a photopolymer and experimentally validated using piezo sensors and laser measurements for dynamic analysis. Theoretically compared with traditional uniform beams, the optimized cantilever designs maximize strain along the upper layer of the elastic substrate element, leading to a substantial increase in the energy conversion efficiency. This maximization is validated by experimental measurements showing a significant increase in strain in the elastic substrate (approximately 30% at the first eigenfrequency and 70% at the second). The correlation between the experimentally obtained data and the simulation results validates the optimization results. Deviation between the results did not exceed 3% and indicates that cantilever-type energy harvesters with optimized thickness profiles outperform traditional rectangular beams in energy conversion efficiency. Full article

To study the complex dynamic response characteristics of spatial crossing tunnels under seismic loads, shaking table model tests were carried out for typical spatial parallel, orthogonal, and oblique crossing tunnels. The propagation and energy distribution characteristics of seismic waves were quantitatively analyzed according to the fundamental frequency, acceleration, and strain response of the system. The results show the following: the addition of a tunnel structure significantly reduces the natural frequency of the system. In spatial crossing tunnel engineering, the axial acceleration responses of the arch top and arch bottom of the tunnel both exhibit the characteristic of a linear distribution, presenting a ‘linear’ shape. For spatial parallel-type and spatial orthogonal-type tunnels, the peak acceleration at the same measurement point of the overcrossing tunnel under the same working condition is generally greater than that of the undercrossing tunnel. However, for the spatial oblique intersection-type structure, the result is just the opposite, that is, the peak acceleration of the overcrossing tunnel is generally less than that of the undercrossing tunnel. For spatial crossing tunnels, unlike the amplification effect of acceleration in a single tunnel, due to the reflection and refraction of seismic waves between the two tunnels, a ‘superposition effect’ of acceleration is generated in space, resulting in an abnormal increase in the acceleration response within the crossing section, which is prone to becoming a weak link in the seismic resistance of the tunnel structure. The strain response of both spatially parallel and orthogonal overcrossing tunnels is greater at the central section than that of undercrossing tunnels and less on both sides. The strain response of the spatial oblique intersection-type overcrossing tunnel is generally greater than that of the undercrossing tunnel. Full article

This paper addresses stability issues, including voltage fluctuation, a frequency offset, and broadband oscillation resulting from the high penetration of renewable energy in a photovoltaic high-permeability distribution network. This paper proposes an active support control strategy which is energy storage grid-connected based on a virtual synchronous generator (VSG). This strategy endows the energy storage system with virtual inertia and a damping capacity by simulating the rotor motion equation and excitation regulation characteristics of the synchronous generator, and effectively enhances the system’s ability to suppress power disturbances. The small-signal model of the VSG system is established, and the influence mechanism of the virtual inertia and damping coefficient on the system stability is revealed. A delay compensator in series with a current feedback path is proposed. Combined with the damping optimization of the LCL filter, the instability risk caused by high-frequency resonance and a control delay is significantly suppressed. The novelty lies in the specific configuration of the compensator within the grid–current feedback loop and its coordinated design with VSG parameters, which differs from traditional capacitive–current feedback compensation methods. The experimental results obtained from a semi-physical simulation platform demonstrate that the proposed control strategy can effectively suppress voltage fluctuations, suppress broadband oscillations, and improve the dynamic response performance and fault ride-through capability of the system under typical disturbance scenarios such as sudden illumination changes, load switching, and grid faults. It provides a feasible technical path for the stable operation of the distribution network with a high proportion of new energy access. Full article

With the increasing penetration of renewable energy, the efficient dispatch of integrated energy systems (IESs) is facing severe challenges. Addressing the uncertainty of renewable energy output and designing efficient market mechanisms are crucial for achieving economical and low-carbon operation of IES. To this end, this paper unveils a comprehensive modeling and optimization framework: Firstly, a Spatio-Temporal Diffusion Model (STDM) is proposed, which generates high-quality wind power forecasting data by accurately capturing its spatio-temporal correlations, thereby providing reliable input for IES dispatch. Subsequently, a stochastic optimal scheduling model for electricity–heat–carbon coupled IES is established, comprehensively considering carbon capture equipment and a carbon quota mechanism. Finally, a multi-IES Nash bargaining cooperative game model is developed, encompassing bilateral energy trading and bilateral carbon trading, to equitably distribute cooperative benefits. Simulation results demonstrate that the STDM model significantly outperforms baseline models in both forecasting accuracy and scenario quality, while the designed bilateral market mechanism enhances system economics by reducing the total operating cost by 19.63% and lowering the total carbon emissions by 4.09%. Full article

Hydrogen is widely regarded as a promising clean energy carrier, and blending hydrogen into existing natural gas pipelines is considered a cost-effective and practical pathway for large-scale deployment. Supplying hydrogen-enriched natural gas to buildings requires careful consideration of the safe operation of pipelines and appliances without introducing new risks. In this study, on-site demonstrations and experimental tests were conducted in two high-rise buildings in Weifang to evaluate the impact of hydrogen addition on high-rise building natural gas distribution systems. The results indicate that hydrogen blending up to 20% by volume does not cause stratification in building risers and leads only to a relatively minor increase in additional pressure, approximately 0.56 Pa/m for every 10% increase in hydrogen addition. While hydrogen addition may increase leakage primarily in aging indoor gas systems, gas meter leakage rates under a 10% hydrogen blend remain below 3 mL/h, satisfying safety requirements. In addition, in-service domestic gas alarms remain effective under hydrogen ratios of 0–20%, with average response times of approximately 19–20 s. These findings help clarify the safety performance of hydrogen-blended natural gas in high-rise building distribution systems and provide practical adjustment measures to support future hydrogen injection projects. Full article

Electric vehicles (EVs) are widely promoted as a key strategy for reducing carbon dioxide (CO₂) emissions and advancing sustainable development. However, the real-world benefits of EV adoption may vary across countries with different income levels and energy systems. This study investigates the relationship between EV adoption and CO₂ emissions per capita, as well as overall sustainable development performance (SDG Index), across 50 countries from 2010 to 2023. Using panel quantile regression, we find that EV adoption is significantly associated with reduced CO₂ emissions particularly in the high-emitting countries in high-income countries (interaction coefficient at the 90th quantile = −0.24, p < 0.05) but positively associated with emissions in lower- and middle-income countries at lower quantiles of the emissions distribution. Similarly, while EV adoption correlates positively with the SDG Index in high-income countries, it shows negative effects at the median and several quantiles. These findings challenge the “zero-emission” assumption and demonstrate that the climate and development benefits of EV diffusion are context-dependent and unevenly distributed, highlighting the need for policies that link electrification to renewable energy deployment, infrastructure development, and equitable access. Full article

Urban energy systems in Andean cities face growing pressure to accommodate rising electricity demand while progressing toward decarbonization and grid modernization. Residential rooftop photovoltaic (PV) generation offers a promising pathway to enhance transformer utilization, reduce emissions, and improve distribution network performance. However, most GIS-based rooftop solar assessments remain disconnected from operational constraints of urban electrical networks, limiting their applicability for distribution planning. This study examines the technical and environmental feasibility of integrating residential PV distributed generation into the urban distribution network of an Andean city by coupling high-resolution geospatial solar potential analysis with monthly aggregated electricity consumption (MEC) and transformer loadability (LD) information. A GIS-driven framework identifies suitable rooftops based on solar irradiation, orientation, slope, shading, and three-dimensional urban geometry, while MEC data are used to perform energy-balance and planning-level transformer LD assessments. Results indicate that approximately 1.16 MW of rooftop PV capacity could be integrated, increasing average transformer LD from 21.5% to 45.8% and yielding an annual PV generation of about 1.9 GWh. This contribution corresponds to an estimated avoidance of 1143 metric tons of CO${}_2$ per year. At the same time, localized reverse power flow causes some transformers to reach or exceed nominal capacity, highlighting the need to explicitly consider network constraints when translating rooftop solar potential into deployable capacity. By explicitly linking rooftop solar resource availability with aggregated electricity consumption and transformer LD, the proposed framework provides a scalable and practical planning tool for distributed PV deployment in complex mountainous urban environments. Full article

The expansion of green hydrogen requires technologies that are both manufacturable at a GW-to-TW power scale and adaptable for decentralized, renewable-driven energy systems. Recent advances in proton exchange membrane, alkaline, and solid oxide electrolysis reveal persistent bottlenecks in catalysts, membranes, porous transport layers, bipolar plates, sealing, and high-temperature ceramics. Emerging fabrication strategies, including roll-to-roll coating, spatial atomic layer deposition, digital-twin-based quality assurance, automated stack assembly, and circular material recovery, enable high-yield, low-variance production compatible with multi-GW power plants. At the same time, these developments support decentralized hydrogen systems that demand compact, dynamically operated, and material-efficient electrolyzers integrated with local renewable generation. The analysis underscores the need to jointly optimize material durability, manufacturing precision, and system-level controllability to ensure reliable and cost-effective hydrogen supply. This paper outlines a convergent approach that connects critical-material reduction, high-throughput manufacturing, a digitalized balance of plant, and circularity with distributed energy architectures and large-scale industrial deployment. Full article

The extensive mining area and multitude of working sites in Maping Phosphate Mine result in a complex ventilation system. This complexity manifests as uneven airflow distribution at working faces, posing considerable challenges for efficient ventilation management. An intelligent ventilation management system based on the Python PyQt5 library was developed for Maping Phosphate Mine to improve ventilation efficiency, lower dust concentration at the working face, and enhance safety by addressing uneven air volume distribution. The implementation of an integrated system, comprising a 3D ventilation network model, remote control capabilities, and smart algorithms, has successfully realized zonal planning and on-demand ventilation in the mine’s underground workings. To adapt to the fluctuating air demand at the tunneling face, a remote intelligent control scheme for louvered dampers was implemented. This dynamic demand-based strategy achieves precise distribution of air volume throughout the ventilation network. The research results demonstrate that the system effectively addresses the uneven distribution of air volume, thereby improving the overall ventilation environment and reducing the risk of ventilation-related accidents. The system serves dual purposes: it provides an intelligent ventilation control mechanism and integrates seamlessly with the key subsystems for underground safety production. This synergy is instrumental in advancing the mine’s digitalization and intelligent transformation initiatives. Field test results indicate that the system achieved a 30% reduction in energy consumption and a 70% decrease in dust concentration at the working face, respectively. Full article

The large-scale integration of Distributed Energy Resources (DERs) in smart grids creates challenges related to real-time optimization, system scalability, and operational security. This paper presents GridOpt, a hybrid edge–cloud framework designed to address these challenges through distributed intelligence and coordinated control. In GridOpt, edge nodes handle latency-sensitive tasks, while cloud resources support the processing of large-scale grid data. Security is addressed through the integration of homomorphic encryption and blockchain-based consensus, together with an interoperability layer that enables coordination among heterogeneous grid components. Simulation results show that GridOpt achieves an average latency of 76 ms and an energy consumption of 25 Joules under high-throughput conditions. The framework further maintains scalability beyond 10 requests per second with a resource utilization of 54% in dense deployment scenarios. Comparative analysis indicates that GridOpt outperforms ECCGrid, JOintCS, and EdgeApp across key performance metrics. Full article

To enhance the power supply resilience of distribution networks with high-penetration distributed photovoltaic (PV) integration during extreme disasters, deploying Mobile Energy Storage Systems (MESSs) proves to be an effective countermeasure. This paper proposes an optimized operational strategy for distribution networks, integrating coordinated clustering of distributed PV systems and MESS operation to ensure power supply during both pre-disaster prevention and post-disaster restoration phases. In the pre-disaster prevention phase, an improved Louvain algorithm is first applied for PV clustering to improve source-load matching efficiency within each cluster, thereby enhancing intra-cluster power supply security. Subsequently, under the worst-case scenarios of PV output fluctuations, a robust optimization algorithm is utilized to optimize the pre-deployment scheme of MESS. In the post-disaster restoration phase, cluster re-partitioning is performed with the goal of minimizing load shedding to ensure power supply, followed by reoptimizing the scheduling of MESS deployment and its charging/discharging power to maximize the improvement of load power supply security. Simulations on a modified IEEE 123-bus distribution network, which includes two MESS units and twenty-four PV systems, demonstrate that the proposed strategy improved the overall restoration rate from 68.98% to 86.89% and increased the PV utilization rate from 47.05% to 86.25% over the baseline case, confirming its significant effectiveness. Full article

Offshore wind energy is a key enabler of the global net-zero transition. As nearshore fixed-bottom projects reach maturity, floating offshore wind turbines (FOWTs) are becoming the next major focus for large scale deployment. To accelerate this development and reduce construction costs, it is essential to optimize mooring systems through a systematic and performance driven framework. This study focuses on the mooring assessment of the Taiwan-developed DeltaFloat semi-submersible platform supporting a 15 MW turbine at a 70 m water depth offshore Hsinchu, Taiwan. A full-chain catenary mooring system was designed based on site specific metocean conditions. The proposed framework integrates ANSYS AQWA (version 2024 R1) and Orcina OrcaFlex (version 11.5) simulations with sensitivity analyses and performance-based fitness metrics including offset, inclination, and line tension to identify key parameters governing mooring behavior. Additionally, an analysis of variance (ANOVA) was conducted to quantitatively evaluate the statistical significance of each design parameter. Results indicate that mooring line length is the most influential factor affecting system performance, followed by line angle and diameter. Optimizing these parameters significantly improves platform stability and reduces tension loads without excessive material use. Building on the optimized symmetric configuration, an asymmetric mooring concept with unequal line lengths is proposed. The asymmetric layout achieves performance comparable to traditional 3 × 1 and 3 × 2 systems under extreme environmental conditions while demonstrating potential reductions in material use and overall cost. Nevertheless, the unbalanced load distribution highlights the need for multi-scenario validation and fatigue assessment to ensure long-term reliability. Overall, the study establishes a comprehensive and sensitivity-based evaluation framework for floating wind mooring systems. The findings provide a balanced and practical reference for the cost-efficient design of floating offshore wind farms in the Taiwan Strait and other shallow-water regions. Full article

Rapid decarbonization and decentralization of power systems are driving the integration of renewable generation, energy storage and digital technologies into unified energy ecosystems. In this context, photovoltaic (PV) systems combined with battery and hydrogen storage and blockchain-based platforms represent a promising pathway toward sustainable and transparent energy management. This study evaluates the techno-economic performance and operational feasibility of integrated PV systems combining battery and hydrogen storage with a blockchain-based peer-to-peer (P2P) energy trading platform. A simulation framework was developed for two representative consumer profiles: a scientific–educational institution and a residential household. Technical, economic and environmental indicators were assessed for PV systems integrated with battery and hydrogen storage. The results indicate substantial reductions in grid electricity demand and CO₂ emissions for both profiles, with hydrogen integration providing additional peak-load stabilization under current cost constraints. Blockchain functionality was validated through smart contracts and a decentralized application, confirming the feasibility of P2P energy exchange without central intermediaries. Grid electricity consumption is reduced by up to approximately 45–50% for residential users and 35–40% for institutional buildings, accompanied by CO₂ emission reductions of up to 70% and 38%, respectively, while hydrogen integration enables significant peak-load reduction. Overall, the results demonstrate the synergistic potential of integrating PV generation, battery and hydrogen storage and blockchain-based trading to enhance energy independence, reduce emissions and improve system resilience, providing a comprehensive basis for future pilot implementations and market optimization strategies. Full article

The increasing demand for energy combined with depleting conventional energy sources has led to the evolution of distributed generation using renewable energy sources. Integrating these distributed generations with the existing grid is a complicated task, as it risks the stability and synchronisation of the system. Microgrids (MG) have evolved as a concrete solution for integrating these DGs into the existing system with the ability to operate in either grid-connected or islanded modes, thereby improving reliability and increasing grid functionality. However, owing to the intermittent nature of renewable energy sources, managing the energy balance and its coordination with the grid is a strenuous task. The hierarchical control structure paves the way for managing the dynamic performance of MGs, including economic aspects. However, this structure lacks the ability to provide effective solutions because of the increased complexity and system dynamics. The incorporation of artificial intelligence techniques for the control of MG has been gaining attention for the past decade to enhance its functionality and operation. Therefore, this paper presents a critical review of various artificial intelligence (AI) techniques that have been implemented for the hierarchical control of MGs and their significance, along with the basic control strategy. Full article