Search Results (44)

In light of the indispensable role of diesel engines in critical sectors such as heavy transportation, agricultural machinery, and shipping and the gradual depletion of fossil fuels, the strategic value of blended fuels has become increasingly prominent. However, the cold-start performance of diesel engines operating on blended fuels remains unclear. This study conducts a comprehensive simulation of the impact of various blended fuel ratios on the cold-start characteristics of diesel engines, focusing on low-temperature fluidity, combustion characteristics, and emissions. The research findings indicate that E30 and E50, as preferred blended fuels, exhibit excellent economic performance and environmental adaptability. Specifically, E30 demonstrates superior combustion performance and higher cylinder peak pressure under low-temperature conditions. In contrast, E50 shows a significant advantage in emissions performance, achieving 17.34% reductions in NOx and 9.7% in HC emissions compared to E30. In addition, a decrease in ambient temperature could help mitigate both NOx and HC emissions. Under simulated high-altitude conditions, E50 exhibits superior hypoxic adaptability compared to E30, achieving significant reductions in NOx (16.3%) and HC (9.7%). This study helps advance the development of clean alternative fuels for diesel engines by providing a theoretical foundation and practical guidelines for biodiesel selection across diverse environmental conditions. Full article

With the significant increase in the number of motor vehicles in plateau regions, the adaptability and reliability requirements of diesel engines operating under high-altitude and cold conditions have become increasingly critical. In this study, a one-dimensional transient simulation model of the overall engine lubrication system was developed based on a physical experimental prototype. The multiphysics-coupled lubrication system was numerically modeled and analyzed, with particular emphasis on elucidating the influence mechanisms of high-altitude and cold environments on the startup performance of diesel engine lubrication systems. System responses under different ambient pressures (0.88 bar, 0.92 bar, 0.96 bar, and standard atmospheric pressure) and oil temperatures (30 °C, 55 °C, and 100 °C) were systematically investigated. In addition, variations in the opening degree of the oil pump pressure relief valve (closed, 4%, 30%, 60%, and 100%) were incorporated to reveal the governing effects of high-altitude and cold environments on lubrication system startup behavior. The results indicate that under high-altitude and cold conditions, the decrease in oil temperature is the dominant factor and exerts the most significant influence on the steady-state oil pressure and flow rate of the lubrication system. Variations in ambient pressure lead only to an equivalent shift in absolute oil pressure, with negligible effects on relative oil pressure, steady-state flow rate, response time, or filling rate. However, a reduction in atmospheric pressure leads to a decrease in the peak oil flow rate at the outlet of the oil pump. The opening degree of the pressure relief valve exhibits a nonlinear influence on the startup performance of the lubrication system, and significantly decreases the oil filling rate. This study innovatively develops a lubrication system performance prediction model under high-altitude, low-pressure, and low-temperature conditions. Calibrated using vehicle road-test data, the model quantifies for the first time the relative contributions of the three key factors to start-up lubrication performance, thereby providing a clear decision-making framework and prioritized improvement directions for the reliability-oriented design and safety threshold calibration of lubrication systems in high-altitude diesel engines. Full article

With the widespread adoption of diesel engine technology, the problem of pollutant emissions has become increasingly prominent. Especially in the cold start stage of the diesel engine, the instantaneous pollutant emissions may be several times or even tens of times that of stable operation, which adds to deterioration of the environment. Therefore, the combustion characteristics and emissions of a two-cylinder diesel engine at high altitudes and low temperatures were explored and analyzed in this research. By adjusting the injection timing and compression ratio (CR) experimentally, the optimal combination of parameters to simulate the emission at high-altitude and low-temperature conditions was determined. The results show that advancing the injection timing can improve the combustion efficiency, but higher CR and injection timing significantly influence the hydrocarbon (HC)/nitrogen oxide (NO_X) trade-off. While delaying the injection timing can reduce NO_X emissions, it can increase HC emissions. Increasing CR from 18.5 to 20.5 raised peak instantaneous NO_X emissions by approximately 27.7% but contributed to a reduction in HC emissions. In the cold start stage, HC concentration peaked sharply and gradually stabilized, while NO_X concentration rose rapidly with more fluctuations. Under high altitude conditions, HC emission normally rises with altitude. When reaching 4000 m, the HC emissions increased by 27.9% compared with 0 m but the concentration decreased at 5000 m, the NO_X emission decreased with elevation, and ambient temperature had little effect. Full article

During the diesel engine start-up phase, low rotational speed and coolant temperature result in poor fuel atomization and prolonged ignition delay. This impedes the in-cylinder combustion process and directly impacts the engine’s emission performance. As the first combustion cycle during the starting process, the initial starting cycle significantly influences subsequent combustion cycles and overall starting performance. This paper proposes a target-torque-based control strategy for fuel injection quantity during the starting process. It optimally determines the target acceleration curve for the starting process, thereby calculating the optimal fuel injection quantity for the initial starting cycle. Based on this, a combustion system simulation model of the diesel engine was established using the 3D CFD software AVL FIRE v2010. The simulation investigated the impact of first injection speed on the combustion process and performance of the first firing cycle under different ambient temperatures: normal temperature (20 °C), low temperature (5 °C), and cold start (−10 °C). The results indicate that the optimal first cycle injection quantities under normal, low, and cold start conditions are 17.3 mg, 18.5 mg, and 20.4 mg, respectively. The impact of first injection speed on the first firing cycle combustion process primarily manifests in the mixture formation rate and time, and higher speeds do not necessarily yield better results. The optimal first injection speeds at normal temperature (20 °C), low temperature (5 °C), and cold start (−10 °C) were 220 r/min, 240 r/min, and 220 r/min, respectively. Corresponding indicated thermal efficiencies were 30.74%, 28.67%, and 28.7%, with relatively low emissions of pollutants such as CO, NOx, and HC. Full article

This study introduces the innovative application of a vapor chamber to mitigate fuel freezing and temperature disparity in power generation cabins operating under extreme cold conditions. A vapor chamber was designed and implemented within a low-temperature power generation platform in Daqing, China, where outdoor temperatures were below −20 °C. The research focused on evaluating the thermal performance of the cabin under natural and forced convection conditions, with and without the vapor chamber. The experimental investigations assessed the effects of the vapor chamber on the thermal dynamics of the power generation cabin, particularly the temperature of the bottom fuel oil and the air temperature distribution. The results indicated that without the vapor chamber significant temperature disparities and potential risks to electrical equipment were present. The vapor chamber effectively utilizes the heat generated by the diesel engine, thus accelerating the heating rate of the fuel at the bottom. It reduces the duration of the decrease in the oil temperature of the upper and lower layers during the initial start-up from 0.44 h and 0.5 h to 0.31 h and 0.35 h, respectively, effectively preventing the risk of fuel freezing in the initial start-up stage. In addition, the installation of the vaporization chamber significantly improves the temperature uniformity of the air inside the cabin. The maximum temperature difference between the upper and lower air in the cabin decreases by 33 °C, effectively improving the overall thermal environment. Full article

Diesel engines are extensively employed in transportation, agriculture, and industry due to their high thermal efficiency and fuel economy. However, the combustion of conventional diesel fuel is accompanied by substantial emissions of pollutants, including carbon monoxide (CO), hydrocarbons (HC), nitrogen oxides (NO_x), and carbon dioxide (CO₂), posing significant threats to environmental quality. Biodiesel, as a renewable and cleaner alternative fuel, can significantly reduce emissions of CO, HC, and particulate matter (PM) due to its unique molecular structure. Nonetheless, its lower calorific value and poor cold-start performance limit its application, while its high oxygen content may contribute to increased NO_x emissions. To address these limitations, researchers have proposed blending biodiesel with alcohol-based fuels such as methanol, ethanol, or butanol to create synergistic combustion systems that optimize engine performance and emission characteristics. This paper systematically reviews the effects of alcohol fuels on the performance and emission characteristics of biodiesel blends in diesel engines. Studies indicate that the addition of alcohol fuels can significantly enhance engine performance by improving fuel atomization, extending ignition delay, and increasing premixed combustion efficiency. These enhancements result in higher cylinder pressure, net heat release rate (HRR), and brake thermal efficiency (BTE), while reducing brake-specific fuel consumption (BSFC) to some extent. Moreover, most studies report that alcohol fuels help reduce CO, HC, smoke, and NO_x emissions but tend to increase CO₂ emissions. However, some findings suggest that in certain cases, the opposite results may occur. The impact of different types of alcohol fuels on performance and emissions varies significantly, requiring a comprehensive evaluation of their properties, such as latent heat, viscosity, and oxygen content. Although the appropriate addition of alcohol fuels demonstrates substantial potential for optimizing engine performance and reducing emissions, excessive blending may lead to adverse effects, necessitating careful control of the blending ratio. Future research should consider mixing two or more alcohol fuels with biodiesel to explore synergistic effects beyond the capabilities of single alcohols. Additionally, further studies should focus on optimizing fuel compositions and emission control strategies for varying operating conditions. Full article

Passive NOx adsorber (PNA) is one of the important means to effectively reduce NOx emission control in the cold start of a diesel engine. A series of Pd/SSZ-13 catalysts with different SiO₂/Al₂O₃ ratios (11, 17, and 25) were prepared using the impregnation method. Furthermore, the effect of the SiO₂/Al₂O₃ ratio on the adsorption performance of Pd/SSZ-13 at low-temperature NOx under realistic exhaust conditions was studied. The results show that the Pd/SSZ-13 catalyst with a low SiO₂/Al₂O₃ ratio after loading Pd has a higher specific surface area and palladium ion content. There is a negative correlation between NOx adsorption performance and the SiO₂/Al₂O₃ ratio. After high-temperature heat treatment, the acid sites closely related to palladium species increase and palladium species will redisperse, producing more palladium ions. The palladium ions coexist in Pd/SSZ-13 in the form of Pd²⁺ and Pd⁺, among which Pd²⁺ is divided into two types: Z⁻Pd²⁺Z⁻ and Z⁻[Pd(II)OH]⁺. The NOx adsorption performance of the Pd/SSZ-13 catalyst was significantly improved, and the higher the SiO₂/Al₂O₃ ratio, the more obviously the advantage of NOx adsorption performance increased after heat treatment. The NOx adsorption kinetic model of the Pd/SSZ-13 catalyst under realistic exhaust conditions was most suitably described by the pseudo-first-order model. Full article

In order to solve the cold-starting problem and improve the intake and exhaust pipe temperatures of diesel engines under cold-starting and low- and medium-speed conditions, this paper proposes a twice-open control method for a hydraulic variable valve system. First, a hydraulic variable valve system that can realize a fully variable valve lift and phase angle is applied to replace the original intake system in order to meet the air intake requirements of different conditions. Then, a twice-open control method in which the intake valve opens two times at the exhaust stroke and intake stroke is proposed to improve the intake pipe temperature and solve the cold-starting problem. This paper contains a numerical work analysis. A GT-POWER model is constructed to validate the intake valve twice-open control method. The cylinder pressure, cylinder temperature, intake pipe pressure, and intake pipe temperature are obtained and compared between the original intake valve system and the hydraulic variable valve system with the proposed intake valve twice-open control method. The results show that the twice-open control method can increase the intake pipe temperature to 260 K or even higher, which can improve the cold-starting performance and the exhaust temperature at low and medium speeds. At the same time, the performance under low- and medium-speed conditions is improved. Full article

Although technical improvements to engines and aftertreatment systems have the greatest impact on pollutant emissions, there is also potential for reducing emissions through driver behavior. This potential can be realized in the very short term, while better emission-control technologies only take effect once they have penetrated the market. In addition to a change in driving style, the vehicle owner’s choice of vehicle technology and size class will also have an impact on the future emissions of the vehicle fleet. The effects of different driving styles, the tire choice, the vehicle size class, and propulsion technologies on energy consumption and tailpipe and non-exhaust emissions are analyzed in this paper for different traffic situations and start temperatures for cars with petrol and diesel combustion engines and for battery electric vehicles. The analysis is completed with the corresponding upstream emissions from fuel and electricity production. The analysis is based on a vehicle simulation using the Passenger car and Heavy-duty Emission Model (PHEM), which is based on a large database of vehicles created using measurements of real driving conditions. For the assessment of the driving style, a novel method was developed in an H2020 project, which reproduces a measured trip with a virtual eco-driver. Carbon dioxide equivalent emissions (CO_2eq) increase with increasing vehicle size, but can be reduced by around 20% for conventional vehicles and 17% for battery electric vehicles (BEVs) through an environmentally conscious driving style. On average, BEVs have around 50% lower CO_2eq emissions than conventional vehicles, if the emissions from vehicle production are also taken into account. On an average journey of 35 km, the cold start of modern diesel vehicles accounts for around half of the total NO_x emissions, while the proportion of cold starts for petrol vehicles is around 25%. Tire and brake wear together generate a similar amount of PN23 emissions as the exhaust gases from new cars. Full article

In order to meet the increasing pollutants discharge standard, the selective catalytic reduction (SCR) module in the diesel engine after-treatment system is an important means to reduce nitrogen oxide (NOx) emissions. SCR systems are prone to urea crystallization at lower temperatures, especially during the cold-start conditions of diesel engines. In this study, we use the diesel engine after-treatment system test bench to obtain the boundary parameter of the simulation modules, and the urea crystallization risk assessment model of the diesel SCR system is established. Comparing the computational fluid dynamics (CFD) results with the test bench results, it is shown that the predicted urea film distribution of the assessment model is in good agreement with the experimental results. In order to clarify the various factors that affect the urea crystallization risk, this paper conducts a simulation analysis on a nozzle and mixer structure and operating parameters. The CFD results indicate that the increase in urea spray time will increase the maximum urea film thickness on the SCR system mixer surface. Exhaust temperature is the most important influencing factor. When the diesel engine exhaust temperature increases from 190 °C to 300 °C, the maximum urea film thickness decreases by 32 and the urea film mass accumulation decreases by 5%. Exhaust flow has a small impact on urea crystallization risk. When the exhaust flow increases from 300 kg/h to 600 kg/h, the maximum urea film thickness decreases by 39% and the urea film mass accumulation decreases by about 1%. In addition, urea spray rate, nozzle numbers, spray angle, and spray cone angle are also factors that affect urea crystallization risk. Full article

A heavy-duty engine is homologated in a test cell. However, starting with Euro VI regulation, the in-service conformity is controlled with the engine installed in the vehicle using portable emission measurement systems (PEMS). In Europe, the application of solid particle number (SPN) PEMS started in 2021 for compression ignition (diesel) vehicles and in 2023 for positive ignition vehicles, thus including those operating with compressed natural gas (CNG). Even though today only particles with sizes > 23 nm are regulated, the Euro 7 proposal includes particles > 10 nm. There are not many studies on the accuracy of the SPN PEMS, especially for heavy-duty applications. In this study, PEMS measuring > 23 and >10 nm from two instrument manufacturers were compared with laboratory-grade instruments. The particle detector of one PEMS was a condensation particle counter (CPC), and of the other a the diffusion charger (DC). The results showed the robustness and good accuracy (40% or 1 × 10¹¹ #/kWh) of the PEMS for ambient temperatures from −7 °C to 35 °C, active regeneration events, different fuels (Diesel B7, HVO, and CNG), different test cycles, cold start or hot engine operations, and high exhaust gas humidity content. Nevertheless, for the DC-based PEMS, sensitivity to pre-charged urea particles was identified, and for the CPC-based PEMS, sensitivity to pressure changes with one vehicle was nnoticed. Nevertheless, the results of this study confirm that the PEMS are accurate enough to measure even the stricter Euro 7 limits. Full article

To achieve diesel engine ultra-low nitrogen oxide emission, light-off selective catalyst reduction (LO-SCR) has been suggested for better performance with lower exhaust temperature. An electric heater upstream of the exhaust aftertreatment system was applied to significantly decrease the NO_x emission at a low exhaust temperature. With a 7.2 kW electric heater coupled with LO-SCR, the NO_x emission during 200~500 s of the world harmonized transient cycle (WHTC) decreased from 282.6 ppm to 61.5 ppm, which is a decrease of 45%. Application of an upstream diesel oxidation catalyst (DOC) decreased the NO_x emission by 63% at the same interval at the cost of worse cold-start performance. The urea input was also adjusted to avoid NO_x emission during the latter part of the WHTC. Full article

As a response to stricter exhaust emission regulations, an increasing number of diesel-powered ships are switching to liquefied natural gas (LNG) fuel or installing post-processing devices to reduce exhaust gas. However, these methods are not feasible for small ships operating primarily along the coast. This is because the cost of the exhaust gas post-processing devices is high, while a large-volume fuel system is required in the case of LNG. Thus, this study used a propane gas fuel system based on a 5.0 L gasoline engine for easy application to existing small ships without major modifications. To optimize the control according to changes in the fuel system, a 1D simulation was performed on the engine to be developed, and ignition timing optimization was investigated. In addition, fuel consumption was compared with that of a gasoline-based engine. The propane engine achieved over 95% power in comparison to a gasoline-based engine. During cold-start tests, starting performance at −15 °C was ensured. The purpose of this study is to provide guidelines to assist the development of LPG or propane engines based on gasoline engines through these processes. Full article

At present, passive NO_x adsorbers (PNAs) represent one of the most effective technologies for addressing NO_x emissions from diesel engines during cold-start periods. Conventional PNAs, which primarily consist of noble metals (such as Pt, Pd, and Ag) loaded on metal oxides or zeolites, share the common drawback of high production costs. Consequently, developing low-cost PNAs with outstanding NO_x storage performance remains a significant challenge. In this study, a series of CuxBa5Ce adsorbents were synthesized using the impregnation method, and a monolithic adsorbent was employed to evaluate NO_x storage and release performance. Techniques such as XRD, UV-Vis DRs, H₂-TPR, XPS, and in situ DRIFTs confirmed the crucial roles of Cu and Ba in NO_x storage and release. Specifically, the incorporation of Cu into CeO₂ enhanced NO_x storage performance. Moreover, in the Cu3Ba5Ce adsorbent, the addition of Ba not only introduced new storage sites and altered the stability of NO_x adsorption species but also helped prevent the aggregation of CuO, thereby prolonging the complete NO_x storage duration and satisfying desorption temperature requirements. The Cu3Ba5Ce adsorbent exhibited the most favorable NO_x storage performance, including a complete NO_x storage time of 135 s and a NO_x storage efficiency exceeding 50% at 80 °C over a 10 min period. While PNAs loaded with noble metals, such as Pd/CeO₂ and Pt/CeO₂, exhibited NO_x storage efficiencies below 50% after adsorbing for 5 min at 80 °C. Therefore, this research offered a crucial strategy for developing non-noble-metal-loaded, Ce-based PNAs. Full article

Reducing diesel engine emissions under cold start conditions has become much more valuable as environmental issues become more important. Regarding diesel engine emissions under cold start conditions, this review summarizes the emission mechanisms and specifically focuses on the research progress of four reduction strategies: biodiesel utilization, intake heating, injection optimization, and aftertreatment technologies. In general, adding biodiesel and Di-Ethyl-Ether (DEE) could provide the benefit of reducing emissions and maintaining engine performance. Intake heating and appropriate injection strategies could also effectively reduce emissions under cold start conditions. Unlike normal operating conditions, lean nitrogen oxide traps (LNT) or electrically heated catalysts (EHC) should be utilized in the aftertreatment of diesel engines to minimize emissions under cold start conditions. By offering the valuable information above, this review could be a helpful reference in reduction strategies for diesel engines under cold start conditions in both academia and industry. Full article