Search Results (58)

Salinization represents a significant threat to freshwater resources worldwide, compromising water quality and security. In the Vieira de Leiria–Marinha Grande aquifer, salinization mechanisms are a complex interaction between seawater intrusion and evaporite dissolution. Near the coast, groundwater is mainly influenced by seawater, evidenced by Na-Cl hydrochemical facies, high electrical conductivity, and Na⁺/Cl⁻, Cl⁻/Br⁻ and SO₄^2−/Cl⁻ molar ratios consistent with marine signatures. In areas affected by diapiric dissolution, besides elevated electrical conductivity, groundwater is enriched in SO₄²⁻ and Ca²⁺ and in minor elements like K⁺, Li⁺, B³⁺, Ba²⁺ and Sr²⁺, and high SO₄²⁻/Cl⁻ and Ca²⁺/HCO₃⁻ molar ratios, indicative of gypsum/anhydrite dissolution. The relationship between δ¹⁸O and electrical conductivity further supports the identification of distinct salinity sources. This study integrates hydrogeochemical tracers to investigate hydrochemical evolution in the aquifer with increasing residence time and influence of water–rock interaction, as well as the accurate characterization of salinization mechanisms in multilayer aquifers. A comprehensive understanding of these processes is essential for identifying vulnerable zones and developing effective management strategies to ensure the protection and sustainable use of groundwater resources. Full article

Basement rock samples were collected from the Zhangzhongjing intraplate seamount in the Southeast sub-basin of the South China Sea (SCS). These alkaline basalts are enriched in light rare earth elements (LREE). The Sr-Nd-Pb-Hf isotopic compositions of the basalts suggest that their parental melts originated from an Indian Ocean-type mantle source that was mixed with enriched EMII components. Semi-quantitative geochemical modeling indicates that the parental melts of the studied basalts formed through heterogeneous melting starts at depth in the garnet facies and, during its uprising, continue at shallow levels in the spinel facies. Furthermore, qualitative isotopic modeling indicates that the inferred EMII components were most likely derived from the nearby Hainan plume. This study provides invaluable insights into the extent to which the Hainan diapir influenced the geochemical and isotopic composition of the upper mantle beneath the East Sub-basin of the SCS. Full article

Since the onset of the Cenozoic, the South China Sea has experienced complex plate interactions including peripheral plate collisions, the demise of the Paleo-South China Sea, and the subsequent opening of the modern basin. These processes produced three major types of sedimentary basins: extensional, strike-slip, and compressional. The Beikang Basin represents a typical extensional continental-margin rift basin that preserves the stratigraphic and sedimentary record of the transition from syn-rift to post-rift stages. Subsidence happened mainly during the post-rift stage. Five structural styles exist: extensional, compressional-inversion, strike-slip–extensional, magmatic, and diapiric. While the first three are fault-related, the last two are mainly controlled by the volcanic phases. Using a seismic-facies-to-sedimentary-system workflow, we delineate a tectono-stratigraphic framework, comprising five seismic facies, seven lithofacies, and eight depositional facies. This framework indicates that the Beikang Basin evolved through four major tectonic stages including initial rifting, inherited rifting, climax rifting, and post-rift thermal subsidence. Each stage has primary control on sediment supply and accommodation development. Our findings refine the basin’s tectono-sedimentary evolution and improve predictions for sediment distribution and hydrocarbon exploration in the underexplored Beikang Basin. Full article

The oblique distribution of orebodies is a fundamental characteristic of the spatial arrangement of orebody groups in non-magmatic hydrothermal deposits and is closely related to shearing. The Daliangzi Pb–Zn deposit in the Sichuan–Yunnan–Guizhou Pb–Zn polymetallic metallogenic area is a typical representative of epigenetic hydrothermal deposits controlled by a strike-slip–fault-fold structure. However, the underlying ore-controlling mechanism of this strike-slip–fault-fold structure remains unclear; as a result, achieving breakthroughs in mineral exploration in the deposit’s deep and peripheral zones is directly hindered. This paper focuses on the Daliangzi Pb–Zn deposit. Based on the Theory and Methods of Ore-field Geomechanics, the hierarchical structural ore-controlling pattern of the deposit is clarified, identifying the NE-trending tectonic zone from the Middle-Late Indosinian to Early Yanshanian as the Pb–Zn metallogenic tectonic system. It proposes the spatial oblique distribution patterns of the deposits, ore sections, orebodies, and ore blocks, along with the mechanical mechanisms of multi-scale structural ore control. A compound negative flower structure–fault-fold–diapiric ore-controlling model was constructed for the Daliangzi Pb–Zn deposit. Finally, the locations of concealed orebodies at different scales within the Daliangzi Pb–Zn deposit and its surrounding areas were predicted; moreover, the locations of concealed orebodies at various depths within the deposit area were also predicted. Full article

(1) Background: This research examines the study of crude oil generation mechanisms in the Diapir Fold Area (exaggerated diapirism alignment) through two representative cases. The geology of the respective area, along with the tectonics and the formation conditions of the hydrocarbons, is presented. (2) Methods: Based on the research of the international study and local research study, the authors simulated two sediment burial models (from the previously mentioned area), suggesting the hydrocarbon generation conditions and tracing the sediment burial curves. (3) Results: Based on these, the depths, the geological ages of the formations generating hydrocarbons, and the time in millions of years were established. (4) Conclusions: A mathematical model based on Artificial Intelligence is presented to resolve an oil generation in a diapirism area. Full article

The Lower Congo Basin (LCB) and the Niger Delta Basin (NDB), two end-member deep-water systems along the West African passive margin, exhibit contrasting sedimentary architectures despite shared geodynamic settings. The research comprehensively utilizes seismic reflection structure, root mean square amplitude slices, drilling lithology, changes in logging curves, and previous research achievements to elucidate the controlling mechanisms behind these differences. Key findings include: (1) Stark depositional contrast: Since the Eocene, the LCB developed retrogradational narrow-shelf systems dominated by erosional channels and terminal lobes, whereas the NDB formed progradational broad-shelf complexes with fan lobes and delta-fed turbidites. (2) Primary controls: Diapir-driven topographic features and basement uplift govern architectural variability, whereas shelf-slope break configuration and oceanic relief constitute subordinate controls. (3) Novel mechanism: First quantification of how diapir-induced seafloor relief redirects sediment pathways and amplifies facies heterogeneity. These insights establish a tectono-sedimentary framework for predicting deep-water reservoirs in diapir-affected passive margins, refine the conventional “source-to-sink” model by emphasizing salt-geomorphic features coupling as the primary driver. By analyzing the differences in lithofacies assemblages and sedimentary configurations among the above-mentioned different basins, this study can provide beneficial insights for the research on related deep-water turbidity current systems and also offer guidance for deep-water oil and gas exploration and development in the West African region and other similar areas. Full article

Traps are central to petroleum exploration, where hydrocarbons accumulate during migration. Reservoirs are likewise an essential petroleum system element and serve as the primary medium for hydrocarbon storage. The buried hill is a geological formation highly favorable for reservoir development. However, the factors influencing hydrocarbon accumulation in buried hill reservoirs are highly diverse, especially in areas with complex, active fault systems. Fault systems play a dual role, both in the formation of reservoirs and in the migration of hydrocarbons. Therefore, understanding the impact of complex fault systems helps enhance the exploration success rate of buried hill traps and guide drilling deployment. In the Beibuwan Basin in the South China Sea, buried hill traps are key targets for deep-buried hydrocarbon exploration in this faulted basin. The low level of exploration and research in buried hills globally limits the understanding of hydrocarbon accumulation conditions, thereby hindering large-scale hydrocarbon exploration. By using drilling data, logging data, and seismic data, stress fields and tectonic faults were restored. There are two types of buried hills developed in the Beibuwan Basin, which were formed during the Late Ordovician-Silurian period and Permian-Triassic period, respectively. The tectonic genesis of the Late Ordovician-Silurian period buried hills belongs to magma diapirism activity, while the tectonic genesis of the Permian-Triassic period buried hills belongs to reverse thrust activity. The fault systems formed by two periods of tectonic activity were respectively altered into basement buried hills and limestone buried hills. The negative structural inversion controls the distribution and interior stratigraphic framework of the deformed Carboniferous strata in the limestone buried hill. The faults and derived fractures of the Late Ordovician-Silurian period and Permian-Triassic period promoted the diagenesis and erosion of these buried hills. The faults formed after the Permian-Triassic period are not conducive to calcite cementation, thus facilitating the preservation of the reservoir space formed earlier. The control of hydrocarbon accumulation by the fault system is reflected in two aspects: on the one hand, the early to mid-Eocene extensional faulting activity directly controlled the depositional process of lacustrine source rocks; on the other hand, the Late Eocene-Oligocene, which is closest to the hydrocarbon expulsion period, is the most effective fault activity period for connecting Eocene source rocks and buried hill reservoirs. This study contributes to understanding of the role of complex fault activity in the formation of buried hill traps within hydrocarbon-bearing basins. Full article

The North Caspian Basin, known for its oil and gas potential, was formed because of the evolution of the ancient Tethys Ocean and is also a result of the collision of the East European, Kazakhstania, and Siberian paleocontinents. At the beginning of the Mesozoic Era, it was a part of the northern continental margin of the Neo-Tethys, which formed Eurasia. In the Late Triassic and Early Jurassic, a major restructuring of the North Caspian sedimentary basin occurred, characterized by angular unconformity and the erosion of underlying sediments in the coastal zones of the basin. The sedimentary succession of the depression accumulating in the Mesozoic Era consisted of alternating siliciclastic and carbonate rocks. It began to form due to the destruction of the uplifts formed north and west of the East European craton and Urals, which resulted in coastal clastic material in the Triassic and Jurassic, but by the end of the Jurassic and Cretaceous, when all uplifts existing in the north of Tethys were leveled, it was mostly marine environments that contributed to the accumulation of siliciclastic and carbonate strata. The appearance of a large amount of sedimentary material towards the center of the depression, causing stress, as well as the deflection of the basement, contributed to fault tectonics and the resumption and manifestation of salt tectonics. As a result of the continuous diapirism of salt bodies during the Late Mesozoic, mini basins were formed, in which different sedimentogenesis was manifested. These processes contributed to the redistribution of hydrocarbons from the underlying pre-salt formations to the intermediate depth interval post-salt succession with Permian–Triassic and also near-surface Jurassic–Cretaceous formations. Full article

In this research, the mud diapirism phenomenon in the Membrillal sector in Cartagena is characterized to analyze its spatiotemporal evolution. The goal is to geomorphologically, geotechnically, and geologically characterize the area to zone regions with the greatest susceptibility to geological hazards and provide an updated diagnosis of the phenomenon. This study is conducted due to the risks that mud diapirism poses to infrastructure and the safety of local communities. Understanding the behavior of these structures is essential for designing effective mitigation measures and optimizing urban planning in areas affected by this phenomenon. The methodology used includes collecting secondary data and implementing geophysical, geotechnical, and laboratory tests. Among the techniques employed are the Standard Penetration Test (SPT), the excavation of test pits, and electrical resistivity tomography, which revealed mud deposits at different depths. Laboratory studies also evaluated the physical and mechanical properties of the soil, such as Atterberg limits, grain size distribution, moisture content, and expansion tests, in addition to physic-chemical analyses. Among the most relevant findings is the presence of four active mud vents and four mud ears, representing an increase compared to the previous study that only recorded three mud vents. The tests revealed mud deposits at 1.30 m and 10 m depths, consistent with the geotechnical results. Laboratory tests revealed highly plastic soils, with Liquid Limits (LL) ranging from 44% to 93% and Plastic Limits (PL) ranging from 14% to 46%. Soil classification showed various low- and high-plasticity clays (CL and CH) and silty clays (MH), presenting challenges for structural stability and foundation design. Additionally, natural moisture content varied between 15.8% and 89%, and specific gravity ranged from 1.72 to 2.75, reflecting significant differences in water retention and soil density. It is concluded that diapirism has increased in the region, with constant monitoring recommended, and the Territorial Planning Plan (POT) has been updated to include regulations that mitigate the risks associated with urban development in affected areas. Full article

A Bottom Simulating Reflector (BSR) is a seismic feature closely related to marine gas hydrate as it is usually regarded as the seismic response of the base of the gas hydrate stability zone in seismic profiles. BSRs are widely distributed in the Makran accretionary wedge, and double BSRs are observed at some locations. Double BSRs usually appear on seismic profiles as two layers of BSRs located at distinct depths but with large lateral seismic amplitude variations. Based on the multi-channel seismic reflection data acquired over the Makran accretionary wedge, this work studies the origin of the double BSR in the Makran accretionary wedge and its association with fluid escape events. Our modeling suggests that double BSRs correspond to both the paleo-seafloor and modern seafloor caused by late sedimentary activities. Also, the residual paleo-BSR migrates upward due to the increase in local geothermal gradient caused by diapirs and gas chimney thermal fluids. Full article

Mineralization processes in the Tell-Atlas of North Africa coincided with magmatism, extension, and lithospheric rejuvenation during the middle to late Miocene. This review examines the lead isotope compositions and Pb-Pb age dating of ore deposits in the region to elucidate the sources and timing of mineralization events. The data reveal a predominantly radiogenic signature in the ores, indicating that the primary component is from a crustal source, with a contribution from the mantle. Pb-Pb age dating suggests the ranges of mineralization ages, with late Miocene events being particularly significant, coinciding with proposed sub-continental mantle delamination following subduction of the African lithosphere. In this context, polymetallic mineralizations formed related to felsic magmatism, hydrothermalism driven by extensional faults, resulting in the formation of Mississippi Valley-Type, and Sedimentary exhalative deposits within associated semi-grabens and diapirism. The correlation between orogenic extensional collapse, magmatism, and mineralization underscores the importance of understanding the specific geological context of ore formation. The detachment of subducted slabs and subsequent influx of hot asthenosphere play pivotal roles in creating conducive conditions for mineralization. This study sheds light on the intricate interplay between tectonic mechanisms, mantle-crust interactions, and mineralization events in the Tell-Atlas, offering insights for further exploration in the region. Full article

The India–Asia collision represents the most significant geological event in the formation of the Tibetan plateau. The subsidence of the Neo-Tethys oceanic slab and the closure of the ocean basin were precursors of the India–Asia collision. The Linzizong volcanic formations, which range in age from the late Cretaceous to early Cenozoic (70–40 Ma), are widely distributed across the Lhasa terrane and are considered products of the closure of the Neo-Tethys oceanic basin and the India–Asia collision. Here, we report a newly identified series of rhyolite porphyries, which share similar age and geochemical features with typical Linzizong volcanic formations. These porphyries are the northernmost extension of Linzizong volcanic formations discovered to date. Zircon U-Pb dating suggests that they formed between 58.8 and 56.1 Ma. These porphyries are characterized by high SiO₂ (75.04%–77.82%), total alkali (K₂O: 4.71%–5.03%), and Na₂O (2.54%–3.63%) values; relatively low Al₂O₃ (12.30%–13.62%) and MgO (0.13%–0.33%) values; and low Mg# values (15.8–25.7). They also exhibit strong enrichment in light rare earth elements ([La/Yb]_N = 3.76–11.08); negative Eu anomalies (Eu/Eu* = 0.10–0.32); Rb, Ba, Th, U, and Pb enrichments; as well as Nb and Ta depletions. The samples have relatively low εNd(t) values (−6.0 to −3.8) and variable zircon εHf(t) values (−6.3 to +3.6). These features suggest they originated from the remelting of the juvenile lower crust of the North Lhasa terrane under high-temperature and extensional conditions. We propose that the Mazin rhyolite porphyries resulted from mantle-derived magma diapirism, triggering juvenile lower crust remelting during Neo-Tethys oceanic slab rollback at the onset of the India–Asia collision. These findings provide new insights into the magmatic processes associated with early collisional tectonics. Full article

This study thoroughly investigates the complex origins of abnormal formation pressure in offshore oil and gas wells, taking the Rio del Rey Basin in Cameroon as a case study. Renowned for its abundant oil and gas resources, the area faces unique challenges in predicting overpressure due to its high-temperature and high-pressure reservoir characteristics. By quantitatively analyzing the main mechanisms such as undercompaction, high-temperature fluid expansion, and mud diapirism, the study addresses the complexities of overpressure prediction. This paper introduces an innovative analytical framework that combines hierarchical clustering algorithms with the LightGBM model. Further refined by the application of Bayesian optimization, the model intelligently adjusts hyperparameters to enhance predictive accuracy. Utilizing well logging data and applying machine learning techniques, the paper classifies and identifies different mechanisms causing abnormal pressures, achieving a model prediction accuracy of 0.942. The research findings highlight the predominant role of the undercompaction mechanism, accounting for approximately 70% of the abnormal high-pressure events in the study area. Fluid expansion and shale diapirism contribute smaller but significant proportions of 10% and 20%, respectively. These quantitative insights into the pressure mechanisms are vital for optimizing drilling operations and reducing risks in oil and gas exploration. The study’s hybrid approach, integrating geophysical analysis with advanced computational techniques, sets a precedent for future research. It provides new avenues for applying machine learning to understand complex geological phenomena in similar geological environments and makes a significant contribution to the strategic planning of hydrocarbon exploration and production activities. Full article

The Kribi-Campo sub-basin, located in the Gulf of Guinea, constitutes the southeastern segment of the Cameroon Atlantic Margin. Drilling in the Aptian salt unit revealed a sparse hydrocarbon presence, contrasting with modest finds in its counterparts like the Ezanga Salt in Gabon and the Rio Muni Salt in Equatorial Guinea. This discrepancy prompted a reassessment of the depositional context and hydrocarbon potential of the Mundeck salt unit. By integrating 2D seismic reflection and borehole data analysis, this study established the structural and stratigraphic framework of the area, emphasizing the salt unit’s significance. Borehole data indicate a localized salt unit offshore Kribi, with seismic reflection data revealing distinct forms of diapir and pillow. This salt unit displays a substantial lateral extent with thicknesses ranging from 4000 m to 6000 m. The depositional context is linked to the following two major geological events: a significant sea-level drop due to margin uplift during the Aptian and thermodynamic processes driven by transfer faults related to mid-oceanic ridge formation. These events were crucial in forming and evolving the Mundeck Salt. Regarding hydrocarbon prospects, this study identifies the unit as being associated with potential petroleum plays, supported by direct hydrocarbon indicators and fault-related structures. The findings suggest that untapped hydrocarbon resources may still exist, underscoring the need for further exploration and analysis. Full article

Extensional tectonics along NE-trending faults, coupled with diapirism, created paleo-highs and subsiding basins, providing the structural framework for subsequent mineralization processes. The preservation of organic matter within the Fahdene and Bahloul Cretaceous formations during the Anoxic Oceanic Events (AOE-1 and AOQ-2) facilitated the extraction of metals from seawater. The association of metals with organic matter, Fe-Mg oxides, and pyrite is revealed by principal component analysis (PCA). The subsequent maturation of organic matter generated hydrocarbons, with thermal cracking leading to the incorporation of organo-metallic ligands into mobile hydrocarbons. Oilfield brines form as a byproduct of this catagenesis. The metal-rich hydrocarbons and basinal brines invaded SO₄⁻²-rich fluids from Triassic evaporites, resulting in the precipitation of sulfates (barite and celestite) and the bacteriogenic (BSR) and/or thermal (TSR) reduction of sulfate to reduced sulfur, which combined with metals to form sulfide ores. This study examines the role of hydrocarbons in the genesis of ore deposits within the diapiric zone, drawing upon a synthesis of literature and geological data. It highlights the interplay between basinal evolution, the organic matter-rich Cretaceous formations (Fahdene and Bahloul), diapiric paleo-highs, and the Alpine orogeny, which are identified as crucial factors in ore genesis in the diapiric zone. Full article