Search Results (1,042)

The intersection of green finance and artificial intelligence (AI) represents a rapidly emerging and high-impact research domain with the potential to reshape sustainable economic systems. This study presents a comprehensive bibliometric and network analysis aimed at mapping the scientific landscape, identifying research hotspots, and highlighting methodological trends at this nexus. A dataset of 268 peer-reviewed publications (2014–June 2025) was retrieved from the Web of Science Core Collection, filtered by the Business Economics category. Analytical techniques employed include Bibliometrix in R, VOSviewer, and science mapping tools such as thematic mapping, trend topic analysis, co-citation networks, and co-occurrence clustering. Results indicate an annual growth rate of 53.31%, with China leading in both productivity and impact, followed by Vietnam and the United Kingdom. The most prolific affiliations and authors, primarily based in China, underscore a concentrated regional research output. The most relevant journals include Energy Economics and Finance Research Letters. Network visualizations identified 17 clusters, with focused analysis on the top three: (1) Emission, Health, and Environmental Risk, (2) Institutional and Technological Infrastructure, and (3) Green Innovation and Sustainable Urban Development. The methodological landscape is equally diverse, with top techniques including blockchain technology, large language models, convolutional neural networks, sentiment analysis, and structural equation modeling, demonstrating a blend of traditional econometrics and advanced AI. This study not only uncovers intellectual structures and thematic evolution but also identifies underdeveloped areas and proposes future research directions. These include dynamic topic modeling, regional case studies, and ethical frameworks for AI in sustainable finance. The findings provide a strategic foundation for advancing interdisciplinary collaboration and policy innovation in green AI–finance ecosystems. Full article

Internal crack defects in high-strength low-alloy (HSLA) steels during continuous casting pose significant challenges to downstream processing and product reliability. However, due to the inherent class imbalance in industrial defect datasets, conventional machine learning models often suffer from poor sensitivity to minority class instances. This study proposes a predictive framework that integrates conditional tabular generative adversarial network (CTGAN) for synthetic minority sample generation and CatBoost for classification. A dataset of 733 process records was collected from a continuous caster, and 25 informative features were selected using mutual information. CTGAN was employed to augment the minority class (crack) samples, achieving a balanced training set. Feature distribution analysis and principal component visualization indicated that the synthetic data effectively preserved the statistical structure of the original minority class. Compared with the other machine learning methods, including KNN, SVM, and MLP, CatBoost achieved the highest metrics, with an accuracy of 0.9239, precision of 0.9041, recall of 0.9018, and F1-score of 0.9022. Results show that CTGAN-based augmentation improves classification performance across all models. These findings highlight the effectiveness of GAN-based augmentation for imbalanced industrial data and validate the CTGAN–CatBoost model as a robust solution for online defect prediction in steel manufacturing. Full article

The development of big data analytics in healthcare has created a demand for privacy-conscious and scalable machine learning algorithms that can allow the use of patient information across different healthcare organizations. In this study, the difficulties that come with traditional federated learning frameworks in healthcare sectors, such as scalability, computational effectiveness, and preserving patient privacy for numerous healthcare systems, are discussed. In this work, a new conceptual model known as Hierarchical Federated Learning (HFL) for large, integrated healthcare organizations that include several institutions is proposed. The first level of aggregation forms regional centers where local updates are first collected and then sent to the second level of aggregation to form the global update, thus reducing the message-passing traffic and improving the scalability of the HFL architecture. Furthermore, the HFL framework leveraged more robust privacy characteristics such as Local Differential Privacy (LDP), Gaussian Differential Privacy (GDP), Secure Multi-Party Computation (SMPC) and Homomorphic Encryption (HE). In addition, a Novel Aggregated Gradient Perturbation Mechanism is presented to alleviate noise in model updates and maintain privacy and utility. The performance of the proposed HFL framework is evaluated on real-life healthcare datasets and an artificial dataset created using Generative Adversarial Networks (GANs), showing that the proposed HFL framework is better than other methods. Our approach provided an accuracy of around 97% and 30% less privacy leakage compared to the existing models of FLBM-IoT and PPFLB. The proposed HFL approach can help to find the optimal balance between privacy and model performance, which is crucial for healthcare applications and scalable and secure solutions. Full article

The Mw 7.8 Gorkha Earthquake of 25 April 2015 triggered over 25,000 landslides across central Nepal, with 4775 events concentrated in Gorkha District alone. Despite substantial advances in landslide susceptibility mapping, existing studies often overlook the compound role of post-seismic rainfall and lack robust spatial validation. To address this gap, we validated an ensemble machine learning framework for co-seismic landslide susceptibility modeling by integrating seismic, geomorphological, hydrological, and anthropogenic variables, including cumulative post-seismic rainfall. Using a balanced dataset of 4775 landslide and non-landslide instances, we evaluated the performance of Logistic Regression (LR), Random Forest (RF), and eXtreme Gradient Boosting (XGBoost) models through spatial cross-validation, SHapley Additive exPlanations (SHAP) explainability, and ablation analysis. The RF model outperformed all others, achieving an accuracy of 87.9% and a Receiver Operating Characteristic (ROC) Area Under the Curve (AUC) value of 0.94, while XGBoost closely followed (AUC = 0.93). Ensemble models collectively classified over 95% of observed landslides into High and Very High susceptibility zones, demonstrating strong spatial reliability. SHAP analysis identified elevation, proximity to fault, peak ground acceleration (PGA), slope, and rainfall as dominant predictors. Notably, the inclusion of post-seismic rainfall substantially improved recall and F1 scores in ablation experiments. Spatial cross-validation revealed the superior generalizability of ensemble models under heterogeneous terrain conditions. The findings underscore the value of integrating post-seismic hydrometeorological factors and spatial validation into susceptibility assessments. We recommend adopting ensemble models, particularly RF, for operational hazard mapping in earthquake-prone mountainous regions. Future research should explore the integration of dynamic rainfall thresholds and physics-informed frameworks to enhance early warning systems and climate resilience. Full article

The stable operation of electrical equipment is critical for industrial safety, yet traditional anomaly detection methods often suffer from limitations, such as high resource demands, dependency on expert knowledge, and lack of real-world capabilities. To address these challenges, this article proposes an unsupervised anomaly detection method for electrical equipment, utilizing audio latent representation and a parallel attention mechanism. The framework employs an autoencoder to extract low-dimensional features from audio signals and introduces a phase-aware parallel attention block to dynamically weight these features for an improved anomaly sensitivity. With adversarial training and a dual-encoding mechanism, the proposed method demonstrates robust performance in complex scenarios. Using public datasets (MIMII and ToyADMOS) and our collected real-world wind turbine data, it achieves high AUC scores, surpassing the best baselines, which demonstrates our framework design is suitable for industrial applications. Full article

Video temporal grounding (VTG) aims to localize a semantically relevant temporal segment within an untrimmed video based on a natural language query. The task continues to face challenges arising from cross-modal semantic misalignment, which is largely attributed to redundant visual content in sensor-acquired video streams, linguistic ambiguity, and discrepancies in modality-specific representations. Most existing approaches rely on intra-modal feature modeling, processing video and text independently throughout the representation learning stage. However, this isolation undermines semantic alignment by neglecting the potential of cross-modal interactions. In practice, a natural language query typically corresponds to spatiotemporal content in video signals collected through camera-based sensing systems, encompassing a particular sequence of frames and its associated salient subregions. We propose a text-guided visual representation optimization framework tailored to enhance semantic interpretation over video signals captured by visual sensors. This framework leverages textual information to focus on spatiotemporal video content, thereby narrowing the cross-modal gap. Built upon the unified cross-modal embedding space provided by CLIP, our model leverages video data from sensing devices to structure representations and introduces two dedicated modules to semantically refine visual representations across spatial and temporal dimensions. First, we design a Spatial Visual Representation Optimization (SVRO) module to learn spatial information within intra-frames. It selects salient patches related to the text, capturing more fine-grained visual details. Second, we introduce a Temporal Visual Representation Optimization (TVRO) module to learn temporal relations from inter-frames. Temporal triplet loss is employed in TVRO to enhance attention on text-relevant frames and capture clip semantics. Additionally, a self-supervised contrastive loss is introduced at the clip–text level to improve inter-clip discrimination by maximizing semantic variance during training. Experiments on Charades-STA, ActivityNet Captions, and TACoS, widely used benchmark datasets, demonstrate that our method outperforms state-of-the-art methods across multiple metrics. Full article

This study focuses on surface wind analysis at the small regional airport in Svidnik, used primarily for pilot training under daytime VFR conditions. Due to the complex local terrain and lack of prior meteorological data, an automatic weather station was installed, collecting over 208,000 wind measurements over a two-year period at ten-minute intervals. The dataset was processed using hierarchical filtering and statistical selection, and visualized via wind rose diagrams. The results confirmed a dominant southeastern wind component, supporting the current runway orientation (01/19). However, a less frequent easterly wind direction was identified as a safety concern, causing turbulence near the runway due to terrain and vegetation. This is particularly critical for trainee pilots during final approach and landing. Statistical analysis showed that easterly winds, though less common, appear year-round with a peak in summer. Pearson correlation and linear regression confirmed a significant relationship between the number of easterly wind days and their measurement frequency. Daytime winds were stronger than nighttime, justifying the focus on daylight data. The study provides practical recommendations for training flight safety and highlights the value of localized wind monitoring at small airports. The presented methodology offers a framework for improving operational awareness and reducing risk in complex environments. Full article

In industrial systems, sensors often classify collected time series data for incipient fault diagnosis. However, time series data from sensors during the initial stages of a fault often exhibits minor fluctuation characteristics. Existing time series classification (TSC) methods struggle to achieve high classification accuracy when these minor fluctuations serve as the primary distinguishing feature. This limitation arises because the low-amplitude variations of these fluctuations, compared with trends, lead the classifier to prioritize and learn trend features while ignoring the minor fluctuations crucial for accurate classification. To address this challenge, this paper proposes a novel graph-based time series classification framework, termed MFSI-TSC. MFSI-TSC first extracts the trend component of the raw time series. Subsequently, both the trend series and the raw series are represented as graphs by extracting the “visible relationship” of the series. By performing a subtraction operation between these graphs, the framework isolates the differential information arising from the minor fluctuations. The subtracted graph effectively captures minor fluctuations by highlighting topological variations, thereby making them more distinguishable. Furthermore, the framework incorporates optimizations to reduce computational complexity, facilitating its deployment in resource-constrained sensor systems. Finally, empirical evaluation of MFSI-TSC on both real-world and publicly available datasets demonstrates its effectiveness. Compared with ten benchmark methods, MFSI-TSC exhibits both high accuracy and computational efficiency, making it more suitable for deployment in sensor systems to complete incipient fault detection tasks. Full article

The efficiency decline of Francis turbines, a key component of hydroelectric power generation, presents a multifaceted challenge influenced by interconnected factors such as water quality, incidence angle, erosion, and runner wear. This paper is structured into two main sections to address these issues. The first section applies the Buckingham π theorem to establish a dimensional analysis (DA) framework, providing insights into the relationships among the operational variables and their impact on turbine wear and efficiency loss. Dimensional analysis offers a theoretical basis for understanding the relationships among operational variables and efficiency within the scope of this study. This understanding, in turn, informs the selection and interpretation of features for machine learning (ML) models aimed at the predictive maintenance of the target variable and important features for the next stage. The second section analyzes an extensive dataset collected from a Francis turbine in Colombia, a country that is heavily reliant on hydroelectric power. The dataset consisted of 60,501 samples recorded over 15 days, offering a robust basis for assessing turbine behavior under real-world operating conditions. An exploratory data analysis (EDA) was conducted by integrating linear regression and a time-series analysis to investigate efficiency dynamics. Key variables, including power output, water flow rate, and operational time, were extracted and analyzed to identify patterns and correlations affecting turbine performance. This study seeks to develop a comprehensive understanding of the factors driving Francis turbine efficiency loss and to propose strategies for mitigating wear-induced performance degradation. The synergy lies in DA’s ability to reduce dimensionality and identify meaningful features, which enhances the ML models’ interpretability, while ML leverages these features to model non-linear and time-dependent patterns that DA alone cannot address. This integrated approach results in a linear regression model with a performance (R²-Test = 0.994) and a time series using ARIMA with a performance (R²-Test = 0.999) that allows for the identification of better generalization, demonstrating the power of combining physical principles with advanced data analysis. The preliminary findings provide valuable insights into the dynamic interplay of operational parameters, contributing to the optimization of turbine operation, efficiency enhancement, and lifespan extension. Ultimately, this study supports the sustainability and economic viability of hydroelectric power generation by advancing tools for predictive maintenance and performance optimization. Full article

In this study, four types of fall detection systems for seniors living alone using x-y scatter and Doppler range images measured from frequency-modulated continuous wave (FMCW) millimeter-wave (mmWave) sensors were introduced. Despite advancements in fall detection, existing long short-term memory (LSTM)-based approaches often struggle with effectively distinguishing falls from similar activities of daily living (ADLs) due to their uniform treatment of all time steps, potentially overlooking critical motion cues. To address this limitation, an attention mechanism has been integrated. Data was collected from seven participants, resulting in a dataset of 669 samples, including 285 falls and 384 ADLs with walking, lying, inactivity, and sitting. Four LSTM-based architectures for fall detection were proposed and evaluated: Raw-LSTM, Raw-LSTM-Attention, HOG-LSTM, and HOG-LSTM-Attention. The histogram of oriented gradient (HOG) method was used for feature extraction, while LSTM networks captured temporal dependencies. The attention mechanism further enhanced model performance by focusing on relevant input features. The Raw-LSTM model processed raw mmWave radar images through LSTM layers and dense layers for classification. The Raw-LSTM-Attention model extended Raw-LSTM with an added self-attention mechanism within the traditional attention framework. The HOG-LSTM model included an additional preprocessing step upon the RAW-LSTM model where HOG features were extracted and classified using an SVM. The HOG-LSTM-Attention model built upon the HOG-LSTM model by incorporating a self-attention mechanism to enhance the model’s ability to accurately classify activities. Evaluation metrics such as Sensitivity, Precision, Accuracy, and F1-Score were used to compare four architectural models. The results showed that the HOG-LSTM-Attention model achieved the highest performance, with an Accuracy of 95.3% and an F1-Score of 95.5%. Optimal self-attention configuration was found at a 2:64 ratio of number of attention heads to channels for keys and queries. Full article

To address the concerns of contrast deterioration, detail loss, and color distortion in images produced under haze conditions in scenarios such as intelligent driving and remote sensing detection, an algorithm for image defogging that combines Retinex theory and the dark channel prior is proposed in this paper. The method involves building a two-stage optimization framework: in the first stage, global contrast enhancement is achieved by Retinex preprocessing, which effectively improves the detail information regarding the dark area and the accuracy of the transmittance map and atmospheric light intensity estimation; in the second stage, an a priori compensation model for the dark channel is constructed, and a depth-map-guided transmittance correction mechanism is introduced to obtain a refined transmittance map. At the same time, the atmospheric light intensity is accurately calculated by the Otsu algorithm and edge constraints, which effectively suppresses the halo artifacts and color deviation of the sky region in the dark channel a priori defogging algorithm. The experiments based on self-collected data and public datasets show that the algorithm in this paper presents better detail preservation ability (the visible edge ratio is minimally improved by 0.1305) and color reproduction (the saturated pixel ratio is reduced to about 0) in the subjective evaluation, and the average gradient ratio of the objective indexes reaches a maximum value of 3.8009, which is improved by 36–56% compared with the classical DCP and Tarel algorithms. The method provides a robust image defogging solution for computer vision systems under complex meteorological conditions. Full article

Mangrove forests are widely recognized for their effectiveness as carbon sinks and serve as critical ecosystems for mitigating the effects of climate change. Current research lacks comprehensive, large-scale carbon storage datasets for wetland ecosystems, particularly across Mexico and other understudied regions worldwide. Therefore, the objective of this study was to develop a high spatial resolution map of carbon stocks, encompassing both aboveground and belowground components, within the Marismas Nacionales system, which is the largest mangrove complex in northeastern Pacific Mexico. Our approach integrates primary field data collected during 2023–2024 and incorporates some historical plot measurements (2011–present) to enhance spatial coverage. These were combined with contemporary remote sensing data, including Sentinel-1, Sentinel-2, and LiDAR, analyzed using Random Forest algorithms. Our spatial models achieved strong predictive accuracy (R² = 0.94–0.95), effectively resolving fine-scale variations driven by canopy structure, hydrologic regime, and spectral heterogeneity. The application of Local Indicators of Spatial Association (LISA) revealed the presence of carbon “hotspots,” which encompass 33% of the total area but contribute to 46% of the overall carbon stocks, amounting to 21.5 Tg C. Notably, elevated concentrations of carbon stocks are observed in the central regions, including the Agua Brava Lagoon and at the southern portion of the study area, where pristine mangrove stands thrive. Also, our analysis reveals that 74.6% of these carbon hotspots fall within existing protected areas, demonstrating relatively effective—though incomplete—conservation coverage across the Marismas Nacionales wetlands. We further identified important cold spots and ecotones that represent priority areas for rehabilitation and adaptive management. These findings establish a transferable framework for enhancing national carbon accounting while advancing nature-based solutions that support both climate mitigation and adaptation goals. Full article

This paper presents a comprehensive model for detecting and addressing concept drift in network security data using the Isolation Forest algorithm. The approach leverages Isolation Forest’s inherent ability to efficiently isolate anomalies in high-dimensional data, making it suitable for adapting to shifting data distributions in dynamic environments.Anomalies in network attack data may not occur in large numbers, so it is important to be able to detect anomalies even with small batch sizes. The novelty of this work lies in successfully detecting anomalies even with small batch sizes and identifying the point at which incremental retraining needs to be started. Triggering retraining early also keeps the model in sync with the latest data, reducing the chance for attacks to be successfully conducted. Our methodology implements an end-to-end workflow that continuously monitors incoming data and detects distribution changes using Isolation Forest, then manages model retraining using Random Forest to maintain optimal performance. We evaluate our approach using UWF-ZeekDataFall22, a newly created dataset that analyzes Zeek’s Connection Logs collected through Security Onion 2 network security monitor and labeled using the MITRE ATT&CK framework. Incremental as well as full retraining are analyzed using Random Forest. There was a steady increase in the model’s performance with incremental retraining and a positive impact on the model’s performance with full model retraining. Full article

The integration of heterogeneous spatio-temporal datasets presents a critical challenge in geospatial data science, particularly when combining large-scale, passively collected “big” data with precise but sparse “small” data. In this study, we propose a novel framework—Multi-Channel Spatio-Temporal Data Fusion (MCST-DF)—that leverages transformer-based deep learning to fuse these data sources for accurate network flow estimation. Our approach introduces a Residual Spatio-Temporal Transformer Network (RSTTNet), equipped with a layered attention mechanism and multi-scale embedding architecture to capture both local and global dependencies across space and time. We evaluate the framework using real-world mobile sensing and loop detector data from the London road network, demonstrating over 89% prediction accuracy and outperforming several benchmark deep learning models. This work provides a generalisable solution for spatio-temporal fusion of diverse geospatial data sources and has direct relevance to smart mobility, urban infrastructure monitoring, and the development of spatially informed AI systems. Full article

Plant growth monitoring is a complex and challenging task, which depends on a variety of environmental variables, such as temperature, humidity, nutrient availability, and solar radiation. Advances in optical sensors have significantly enhanced data collection on plant growth. These developments enable the optimization of agricultural practices and crop management through the integration of artificial vision techniques. Despite advances in the application of these technologies, limitations and challenges persist. This review aims to analyze the current state-of-the-art methodologies for using artificial vision and optical sensors in plant growth assessment. The systematic review was conducted following the guidelines for Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA). Relevant studies were analyzed from the Scopus and Web of Science databases. The main findings indicate that data collection in agricultural environments is challenging. This is due to the variability of climatic conditions, the heterogeneity of crops, and the difficulty in obtaining accurately and homogeneously labeled datasets. Additionally, the integration of artificial vision models and advanced sensors would enable the assessment of plant responses to these environmental factors. The advantages and limitations were examined, as well as proposed research areas to further contribute to the improvement and expansion of these emerging technologies for plant growth assessment. Finally, a relevant research line focuses on evaluating AI-based models on low-power embedded platforms to develop accessible and efficient decision-making solutions in both agricultural and urban environments. This systematic review was registered in the Open Science Framework (OSF). Full article