Search Results (786)

A one-pot synthetic methodology that combines an Ugi-Zhu three-component reaction (UZ-3CR) with a cascade sequence (intermolecular aza Diels–Alder cycloaddition/intramolecular N-acylation/decarboxylation/dehydration) using microwave-heating conditions, ytterbium (III) triflate (Yb(OTf)₃) as the catalyst, and chlorobenzene (for the first time in a multi-component reaction (MCR)) as the solvent, was developed to synthesize twelve new fluorinated-pyrrolo[3,4-b]pyridin-5-ones containing a 4-amino-7-chloroquinoline moiety, yielding 50–77% in 95 min per product, with associated atom economies around 88%, also per product. Additionally, by in vitro tests, compounds 19d and 19i were found to effectively stop early SARS-CoV-2 replication, IC₅₀ = 6.74 µM and 5.29 µM, at 0 h and 1 h respectively, while cell viability remained above 90% relative to the control vehicle at 10 µM. Additional computer-based studies revealed that the most active compounds formed strong favorable interactions with important viral proteins (M_pro, NTDα and NTDo) of coronavirus, supporting a two-pronged approach that affects both how the virus infects the cells and how it replicates its genetic material. Finally, quantum chemistry analyses of non-covalent interactions were performed from Density-Functional Theory (DFT) to better understand how the active compounds hit the virus. Full article

Fused and spiro nitrogen-containing heterocycles play an important role as structural motifs in numerous biologically active natural products and pharmaceuticals. The review summarizes various approaches to the synthesis of three-, four-, five-, and six-membered fused and spiro heterocycles with one or two nitrogen atoms. The assembling of the titled compounds via cycloaddition, oxidative cyclization, intramolecular ring closure, and insertion of sextet intermediates—carbenes and nitrenes—is examined on a vast number of examples. Many of the reactions proceed with high regio-, stereo-, or diastereoselectivity and in excellent, up to quantitative, yield, which is of principal importance for the synthesis of chiral drug-like compounds. For most unusual and hardly predictable transformations, the mechanisms are given or referred to. Full article

Polycyclic aromatic compounds can often be made by a sequence featuring an initial Diels–Alder [4 + 2] cycloaddition reaction, followed by cheletropic extrusion of carbon monoxide. These reactions normally require heating the diene and dieneophile in petrochemical-derived aromatic hydrocarbon solvents, such as xylenes or diphenyl ether. This article summarizes the results of attempts to use renewable solvents in place of those currently in use to prepare pentaphenylbenzene and 1,2,4-triphenyltriphenylene. Dihydrolevoglucosenone, p-cymene, ethyl lactate, diethyl carbonate, and cyclopentyl methyl ether have all been successfully evaluated as renewable solvent alternatives in Diels–Alder/cheletropic reaction sequences. An analysis of the products from the reactions investigated did not show evidence of oxidative degradation of the diene reactants. Furthermore, norbornadien-7-one intermediates were not isolated from any of the reactions tested. Full article

The cationic chloro-P-{[4-(diphenylphosphanyl)phenyl]-N,N-dimethylmethanammonio(norbornadiene)rhodium(I) complex was encapsulated inside a self-assembled hexameric capsule. This capsule was obtained through a reaction involving 2,8,14,20-tetra-undecyl-resorcin[4]arene and water in chloroform. The formation of an inclusion complex was deduced from a combination of spectral measurements (UV-visible spectroscopy, ¹H, ³¹P{¹H} NMR and DOSY). The rhodium complex was evaluated in the [2+2+2] cycloaddition between N,N-dipropargyl-p-toluenesulfonamide and arylacetylene derivatives. In the presence of two equivalents of arylacetylenes in water-saturated chloroform at 60 °C for 24 h, the 4-methyl-N-(prop-2-yn-1-yl)-N-((2-tosylisoindolin-5-yl)methyl)benzenesulfonamide, the homocycloaddition product of 1,6-diyne is predominantly formed. In the presence of the supramolecular capsule, a selectivity inversion in favor of 5-aryl-2-tosylisoindoline is observed, with heterocycloaddition products formed in proportions between 53 and 69%. Full article

Mechanochemical and transition-metal-catalyzed reactions of alkynes, exhibiting significant advantages like short reaction time, solvent-free, high yield and good selectivity, were considered to be green and sustainable pathways to access functionalized molecules and obtained increasing attention due to the superiorities of mechanochemical processes and the reactivities of alkynes. The ball milling and CuI-catalyzed Sonogashira coupling of alkyne and aryl iodide avoided the use of common palladium catalysts. The mechanochemical Rh(III)- and Au(I)-catalyzed C–H alkynylations of indoles formed the 2-alkynylated and 3-alkynylated indoles selectively. The mechanochemical and copper-catalyzed azide-alkyne cycloaddition (CuAAC) between alkynes and azides were developed to synthesize 1,2,3-triazoles. Isoxazole could be formed through ball-milling-enabled and Ru-promoted cycloaddition of alkyne and hydroxyimidel chloride. In this review, the generation of mechanochemical and transition-metal-catalyzed reactions of alkynes was highlighted. Firstly, the superiority and application of transition-metal-catalyzed reactions of alkynes were briefly introduced. After presenting the usefulness of green chemistry and mechanochemical reactions, mechanochemical and transition-metal-catalyzed reactions of alkynes were classified and demonstrated in detail. Based on different kinds of reactions of alkynes, mechanochemical and transition-metal-catalyzed coupling, cycloaddition and alkenylation reactions were summarized and the proposed reaction mechanisms were disclosed if available. Full article

In the chemistry of bio-based furans, the Diels–Alder reaction plays an important role as a renewable route for the synthesis of fuels, fine chemicals, and monomers. Nonetheless, the unfavorable kinetic and thermodynamic parameters inherent to the Diels–Alder reaction involving furans as dienes often lead to the reversibility of cycloaddition, resulting in decreased equilibrium conversion and diastereoselectivity. In this study, we present a new strategy for overcoming the problem of reversibility in chemical reactions. We demonstrate that conducting the reaction under solvent-free conditions can facilitate the transition from a molten state formed by the initial reactants to a solid phase containing the reaction product along with an excess of the initial substrate. According to our results, such a liquid-to-solid transition of the reaction mixture can lead to exceptionally high conversion and diastereoselectivity in the furan–maleimide Diels–Alder reaction, particularly for challenging electron-poor furanic substrates. Our approach enables the reversible furan–maleimide Diels–Alder reaction to be performed in a cleaner and more environmentally friendly manner, free from the complexities associated with the use of solvents and the need for purification from side products. Full article

The title compound, C₂₆H₂₁BrN₂O₅ (Compound 4), was obtained via our previously described procedure with modifications, i.e., via a facile one-pot three component reaction starting from commercially available materials. Compound 4 was crystallized from nitromethane. It crystalized in a triclinic crystal system, in the P-$\overline{1}$ space group. The crystal structure of 4 is described herein. Hirsfeld surface analysis, generated by the Crystal Explorer 21 software, was used to visualize the intermolecular close contacts in the title compound. The electrostatic, dispersion, and total energies in the crystal structure were calculated using the same program. Full article

The synthesis of novel biodegradable polymers as non-viral vectors remains one of the challenging tasks in the field of gene delivery. In this study, the synthesis of the polysaccharide-g-polypeptide copolymers, namely, hyaluronic acid-g-polylysine (HA-g-PLys), using a copper-free strain-promoted azide-alkyne cycloaddition reaction was proposed. For this purpose, hyaluronic acid was modified with dibenzocyclooctyne moieties, and poly-L-lysine with a terminal azido group was obtained using ring-opening polymerization of N-carboxyanhydride of the corresponding protected amino acid, initiated with the amino group azido-PEG₃-amine. Two HA-g-PLys samples with different degrees of grafting were synthesized, and the structures of all modified and synthesized polymers were confirmed using ¹H NMR and FTIR spectroscopy. The HA-g-PLys samples obtained were able to form nanoparticles in aqueous media due to self-assembly driven by electrostatic interactions. The binding of DNA and model siRNA by copolymers to form polyplexes was analyzed using ethidium bromide, agarose gel electrophoresis, and SybrGreen I assays. The hydrodynamic diameter of polyplexes was ˂300 nm (polydispersity index, PDI ˂ 0.3). The release of a model fluorescently-labeled oligonucleotide in the complex biological medium was significantly higher in the case of HA-g-PLys as compared to that in the case of PLys-based polyplexes. In addition, the cytotoxicity in normal and cancer cells, as well as the ability of HA-g-PLys to facilitate intracellular delivery of anti-GFP siRNA to NIH-3T3/GFP+ cells, were evaluated. Full article

The procedure for the generation of azirinyl-substituted nitrile oxides by the reaction of 2-(diazoacetyl)-2H-azirines with tert-butyl nitrite while preserving the azirine ring has been developed. The [3+2] cycloaddition of azirinyl-substituted nitrile oxides to terminal acetylenes produced azirinyl(isoxazolyl)ketones with various substituents in position 3 of azirine and position 5 of isoxazole fragments in a 51–91% yield at room temperature in DCM. DFT calculations and experimental data are consistent with the assumption that the formation of azirinyl-substituted nitrile oxides is accelerated by the acid catalyst. Cycloadducts of nitrile oxides with aryl/hetarylacetylenes and DMAD can be obtained by catalysis with boron trifluoride etherate, which significantly expands the scope of application of the reaction. Expansion of the azirine ring of the prepared cycloadducts allows obtaining a wide range of structurally diverse functionalized isoxazole-containing heterocyclic hybrids. LED light induces isomerization of the azirinecarbonyl moiety of the azirinyl(isoxazolyl)ketones, resulting in the formation of a set of 3,5’-biisoxazoles in a 40–71% yield, while the catalytic reaction of the azirine moiety with 1,3-diketones opens the way to pyrrole- and isoxazole-containing hybrids. 2-(Isoxazole-3-ylcarbonyl)-3-arylazirines were also easily isomerized to 3-(oxazol-5-yl)isoxazoles in methanol in the presence of excess potassium carbonate at room temperature. Full article

A novel metal–organic framework based on zinc ions, designated as Zn-URJC-12, has been synthesized and applied for the first time in the cycloaddition reaction between carbon dioxide and epoxides. This MOF is constructed from two different organic linkers: 5-aminoisophthalic acid and 4,4′-biphenyldicarboxylic acid. The framework features –NH₂ functional groups coordinated to Zn(II) centers, as confirmed by single-crystal X-ray diffraction analysis. Zn-URJC-12 demonstrates exceptional chemical stability in polar organic solvents, such as methanol, while maintaining thermal stability up to 250 °C. The material exhibits high catalytic efficiency in the cycloaddition of CO₂ with epoxides, achieving yields of 100% and 76% for propylene oxide and allyl glycidyl ether, respectively. Additionally, Zn-URJC-12 maintains its structural integrity and catalytic performance during five successive reaction cycles. These findings underscore Zn-URJC-12 as a promising heterogeneous catalyst for the valorization of CO₂ into cyclic carbonates. Full article

Heavier element analogues of a ketone, a C=O double-bond compound, have been fascinating compounds from the viewpoint of main-group element chemistry because of their unique structural features and reactivity as compared with those of a ketone, which plays an important role in organic chemistry. We will report here the synthesis of diorgano-stannanethione and stannaneselone featuring tin–chalcogen double bonds, which are the heavy-element analogues of a ketone. The newly obtained stannaneselone has been structurally characterized by spectroscopic analyses and single-crystal X-ray diffraction (SC-XRD) analysis, showing the short Sn–Se bond length featuring π-bond character. The obtained bis(ferrocenyl)stannanechalcogenones were found to undergo [2+4]cycloaddition reactions with 2,3-dimethyl-1,3-butadiene, affording the corresponding six-membered ring compound. Notably, thermolysis of the [2+4]cycloadduct of the stannaneselone regenerated the stannaneselone via the retro[2+4]cycloaddition, whereas the sulfur analogue was thermally very stable. Full article

Carbonyl–olefin metathesis is an important reaction for the formation of new carbon–carbon bonds, specifically double bonds. This critical review presents an overview of the different possibilities of these reactions, highlighting their use in the synthesis of natural products. It features classical photochemical approaches via [2+2]-cycloadditions, early metal-mediated reports, and emerging catalytic methods through the use of organocatalysts or Lewis or Brønsted acids. Comparisons between methods are presented throughout the text, based primarily on robustness, selectivity, methodology, experimental simplicity, and utilization in the synthesis of natural products. Full article

In the realm of click-type reactions and their application to bioorthogonal chemistry in living organisms, metal-free [3+2] cycloadditions involving mesoionic rings and strained cycloalkynes have gained increasing attention and potentiality in recent years. While there has been a significant accretion of experimental data, biological assays, and assessments of reaction mechanisms, some pieces of the tale are still missing. For instance, which structural and/or stereoelectronic effects are actually interlocked and which remain unplugged. With the advent of data-driven methods, including machine learning simulations, quantitative estimations of relevant observables and their correlations will explore better the chemical space of these transformations. Here we unveil a series of linear relationships, such as Hammett-type correlations, as well as deviations of linearity, using the case study of phenylsydnone (and its 4-aryl-substituted derivatives) with a highly reactive bicyclo[6.1.0]nonyne carbinol. Through accurate estimation of activation barriers and prediction of rate constants, our findings further increase the significance of integrating strain release and electronic effects in organic reactivity. Moreover, such results could pave the way to use mesoionics cycloadditions as probes for measuring the extent of delocalization-assisted strain release, which can be applied to related reactions involving dipoles and strained rings. Full article

The regioselectivity and the molecular mechanism of the Diels–Alder reactions between N-(2,2,2-trichloroethylidene)carboxamides and dicyclohexylcarbodiimide were explored based on the ωB97xd/6-311G(d) (PCM) calculations. It was found that the reaction course is determined by polar local interactions. It is interesting that the most favored reaction channel is realized not via classical single-step Diels–Alder mechanism, but according to the stepwise scheme with the intervention of the zwitterionic intermediate. The details of the electron density redistribution along the reaction coordinate were explained using the ELF technique. Full article