Search Results (15,399)

Background/Objectives: Poor aqueous solubility limits the oral absorption and bioavailability of many active pharmaceutical ingredients. Simple formulation approaches suitable for hospital and community pharmacy compounding are therefore needed. This study aimed to develop and evaluate melt-filled hard capsules containing nifedipine, a model of poorly water-soluble BCS class II drug, using polyethylene glycol (PEG) carriers to improve dissolution performance. Methods: PEG blends of different molecular weights (PEG 400, PEG 1500, and PEG 4000) were prepared by melt mixing, followed by incorporation of nifedipine and manual filling into hard gelatin capsules. The formulations were characterized regarding mass variation, drug content, in vitro dissolution, rheological behavior, and solid-state properties using Fourier transform infrared (FTIR) spectroscopy. Dissolution profiles were kinetically modeled and compared with pure nifedipine. Results: All capsules met pharmacopoeial requirements for mass uniformity and showed acceptable drug content. PEG-based melt-filled formulations exhibited markedly enhanced dissolution compared with crystalline nifedipine. Faster drug release was associated with lower-molecular-weight PEGs and reduced viscosity, with the PEG 400/PEG 1500 blend demonstrating the most rapid dissolution. Rheological analysis confirmed shear-thinning behavior, while FTIR findings suggested intermolecular interactions and partial amorphization of nifedipine within the PEG matrices. Conclusions: This study provides a translational adaptation of solid dispersion principles into a compounding-compatible melt-filling approach. Full article

Background: Sulfated chitosan (ChS) is a chemically modified polysaccharide derived from chitin that mimics heparan sulfate (HS) structures and has emerged as a promising antimicrobial biomaterial. Piscirickettsia salmonis, the etiological agent of Salmonid Rickettsial Septicemia (SRS), represents the main driver of antibiotic use in Chilean aquaculture. Objective: In this study, the in vitro antibacterial activity of ChS against P. salmonis was evaluated. Methods: Elemental characterization by SEM-EDS and FTIR analysis confirmed successful sulfation of the polymer, with a degree of sulfation ranging from 0.92 to 0.95. Additionally, X-ray diffraction (XRD) analysis revealed a reduction in polymer crystallinity, indicating a transition toward a more amorphous structure associated with increased molecular flexibility and functional group accessibility. Results: Antibacterial assays revealed a minimum inhibitory concentration (MIC) of 1500 µg/mL and a minimum bactericidal concentration (MBC ≥ 1500 µg/mL). LIVE/DEAD™ fluorescence imaging showed the formation of bacterial aggregates with increasing size, frequency, and red fluorescence compared to controls over the exposure to ChS, indicating progressive membrane damage. This was supported by a reduction (p < 0.05) in the Green/Red fluorescence ratio of 37–46% between 5 h and 96 h of exposure, corresponding to alteration of the cell membrane. Scanning electron microscopy revealed pronounced morphological alterations by ChS, including surface disruption and loss of cellular integrity. This was more severe compared to commercial chitosan (ChC). Also, ChS reduced (p < 0.05) biofilm formation (>50% at day 6 and 34.8% at day 8). Conclusions: These results demonstrated that ChS disrupts the cell membrane and reduces biofilm formation in P. salmonis, thereby affecting viability. This is the first report of the antibacterial effect of ChS, an HS analogue, against P. salmonis. Full article

Achieving selective SO₂ capture at low pressures is pivotal and challenging for possible flue gas desulfurization and air pollution control. In this study, we synthesized a series of ionic covalent organic frameworks (iCOFs) with β-ketoenamine linkages and sulfonic acid groups using a solvothermal method. TpPa-SO₃H and TpBD-(SO₃H)₂ show a higher SO₂ uptake of 4.46 and 5.24 mmol g⁻¹ than TpPa-1 (4.24 mmol g⁻¹) at 1 bar and 298 K, respectively, due to the combination of the good SO₂ affinity of the polar sulfonic acid groups, higher pore volumes, and the good stability of β-ketoenamine COFs. TpBD-(SO₃H)₂ captured 2.83 mmol g⁻¹ of SO₂ at 0.1 bar and 298 K, which is 1.6 times higher than TpPa-1 (1.82 mmol g⁻¹) under the same conditions. Notably, the IAST SO₂/CO₂ selectivity of TpBD-(SO₃H)₂ and TpPa-1 are 61 and 51, respectively, reflecting the impact of the incorporated SO₃H groups’ higher affinity toward SO₂. Notably, the multicomponent gas mixture breakthrough experiments confirm that TpBD-(SO₃H)₂ displays longer breakthrough time than TpPa-1 (987 vs. 311 min g⁻¹). These β-ketoenamine iCOFs demonstrate nearly complete retention of crystallinity and porosity after exposure to dry or humid SO₂. This work demonstrates that iCOFs are promising adsorbents for SO₂ capture due to their high capacity, stability, and affinity for SO₂ at low pressure. Full article

The preparation of new magnetic materials is important because of their potential application in various electronic components. In the present work, the synthesis of glass-crystalline materials in the system Na₂O-MnO-SiO₂-Fe₂O₃ prepared by applying melt-quenching is reported. The phase composition as studied by X-ray diffraction and Raman spectroscopy reveals the precipitation of monophase Mn_xFe_3−xO₄ based solid solutions. The microstructure is studied by scanning electron and optical microscopy and shows bulk crystallization and the presence of polygon-shaped as well as of dendritic crystals, depending on the iron oxide concentration and used raw materials. Mössbauer spectra show that in the amorphous matrix the Fe ions are mainly present as Fe³⁺ in tetrahedral coordination and as Fe³⁺ in a solid solution with the composition Mn_xFe_3−xO₄. The simultaneous presence of MnFe₂O₄ (jacobsite) and a Mn-containing solid solution based on Fe₃O₄ (magnetite) is suggested. The room temperature magnetic properties were studied by vibrating sample magnetometer and reveal ferrimagnetic properties for all investigated glass-crystalline materials. Full article

Rapid and accurate urea detection is of considerable importance in environmental monitoring and biomedical analysis, as abnormal urea levels are associated with water contamination and various health conditions. In this study, a silver nanoparticle-decorated graphene oxide (Ag/GO) composite was synthesized via a simple chemical reduction method. The characterization results confirmed the successful formation of well-crystalline Ag nanoparticles (7.44 ± 1.46 nm) with uniform dispersion on GO, with a Ag loading of 39.1 wt%. The electrochemical performance for urea detection was evaluated in an alkaline medium (0.1 M NaOH) using cyclic voltammetry and chronoamperometry in a three-electrode system. The Ag/GO-modified glassy carbon electrode exhibited a strong electrocatalytic response toward urea oxidation, with a linear detection range of 1–10 mM. The sensitivity and limit of detection (LOD) were 36.8 μA mM⁻¹ and 0.11 mM, respectively. The sensor also demonstrated excellent selectivity in the presence of common interfering species, including uric acid, ascorbic acid, and glucose, along with good reproducibility, repeatability, and stability. Furthermore, the practical applicability of the sensor was assessed in real samples, where satisfactory recovery was achieved in tap water, while reduced performance was observed in milk due to matrix effects. These findings indicate that the Ag/GO composite can serve as an effective alternative electrode material for non-enzymatic electrochemical detection of urea, particularly in wastewater and biological systems. Full article

Organic light-emitting diode (OLED)-based devices continue to grow rapidly in popularity. This work presents a comprehensive thermodynamic study of four nitrogen-containing organic semiconductors: 1,3-bis(9H-carbazol-9-yl)benzene (mCP), 1,3,5-tri(9H-carbazol-9-yl)benzene (TCB), 1,3,5-tris(diphenylamino)benzene (TDAB), and 1,3,5-tris[(3-methylphenyl)phenylamino]benzene (m-MTDAB). A self-consistent set of phase-change thermodynamic parameters in a wide temperature range was obtained using several independent experimental and computational techniques. Vapor pressure measurements above the liquid and crystalline phases of the compounds under study were carried out using the thermogravimetry–fast scanning calorimetry method. Based on the temperature dependence of the measured vapor pressures, vaporization and sublimation enthalpies were derived. Differential scanning calorimetry was employed to determine the heat capacities of the condensed phases and the melting parameters of the studied compounds, as well as to investigate the polymorphism of TCB. Solution calorimetry was used to determine the fusion enthalpies of the compounds at 298.15 K. The obtained values were additionally compared with the literature data and calculated estimates. The results of this study may be used to predict properties for compounds with similar molecular structures. Full article

Background. Nanoparticle-mediated radiotherapy is a promising approach to enhance tumor radiosensitivity while reducing damage to healthy tissues. Particularly, melanoma is a highly aggressive malignancy with an increasing global incidence and limited therapeutic options in advanced stages, due to its intrinsic radioresistance and narrow therapeutic window in metastatic settings. In this study, we developed a systematic library of gadolinium-doped iron oxide nanoparticles (Fe-Gd NPs) with controlled compositions (0–75% Gd) to investigate the functional and compositional determinants of radiosensitization in melanoma. Methods. The physicochemical properties of the Fe-Gd NPs, including the morphology, crystallinity, and composition, were thoroughly characterized and correlated with biological responses. The biological evaluation was performed using both 2D and tissue-relevant 3D melanoma models, integrating metabolic viability assays (MTT/MTS), mitochondrial function (ATP quantification, MitoTracker analysis), and clonogenic survival following low-energy X-Ray irradiation (150 kV, 4 Gy). In vivo systemic tolerance and response in non-tumor tissues were investigated in BALB/C mice. Results. Our results showed that radiosensitization did not increase linearly with the Gd content, with the 25% Fe-Gd NPs being identified as a therapeutic window and having the most pronounced effect in melanoma cell models, while maintaining good systemic safety in vivo. This study provides functional evidence that nanoparticle-mediated radiosensitization is not only determined by a high Z content, but also by tumor-specific metabolic adaptability and the nanoparticle composition. Conclusions. These findings support the rational design of Fe-Gd nanoparticles with optimized therapeutic windows and highlight the importance of metabolic and 3D tissue-relevant models in preclinical evaluation of nanoparticle-mediated radiotherapy. Full article

Biotemplated strategies inspired by natural architecture have emerged as an effective strategy to improve the performance of photocatalytic materials. In this work, TiO₂-based photocatalysts were synthesized using olive leaves as a biological template to reproduce their hierarchical microstructure and enhance photocatalytic hydrogen production. The artificial olive leaf (AOL) support was obtained through a biotemplated ion-exchange process followed by hydrolysis and calcination. It was then modified by photodeposition of Au or Pt nanoparticles. The materials were characterized by SEM, XRD, N₂ adsorption–desorption, UV–Vis spectroscopy, and XPS to evaluate their structural and optical properties. SEM confirmed the successful replication of both the external morphology and internal architecture of the olive leaf, while XRD revealed low crystallinity with anatase as the only TiO₂ phase. Optical characterization showed a reduced band gap (~2.97 eV), and extended absorption toward the visible region, with Au nanoparticles exhibiting a plasmonic band at ~550 nm, whereas Pt enhanced light-harvesting efficiency. XPS indicated the presence of oxygen vacancies and Ti³⁺ species that promote metal–support interactions. Photocatalytic glycerol photoreforming showed a strong enhancement in hydrogen production after noble metal incorporation, reaching up to 14-fold under UV irradiation and 23-fold under simulated solar light for the Pt-modified catalyst, highlighting the synergy between biotemplated structuring and noble metal deposition. Full article

The present work aimed to obtain antibacterial wound dressings using bacterial cellulose (BC) as a support, to improve wound treatment and reduce the incidence of infections. To enhance the antibacterial activity of the synthesized dressings, the introduction of ZnO nanoparticles into the BC network by precipitation was pursued. The method chosen to develop ZnO NPs was green synthesis, an ecological and sustainable method for obtaining nanomaterials using plant extracts as reducing agents or stabilizers. Thus, the chosen plants were Ginger rhizomes, Bay leaves, and Rose hips, in both fresh and dry form, due to the natural benefits they possess, and the Soxhlet method was used to obtain the plant extracts desired to be used in the synthesis. The composite dressings were developed in two distinct sample series, differentiated by the immersion time of BC in the precursor Zn²⁺ solution. The samples in the first series were obtained by precipitation in a mixture of Zn²⁺ solution and natural extract, whereas the samples in the second series were obtained by successive immersion in Zn²⁺ solution and then in natural extract, which demonstrated a considerable difference. The best antimicrobial activity tested against Gram-negative bacterium Escherichia coli was recorded for the composite material obtained in the presence of fresh rose hip extract, an aspect most likely related to the morphological and crystalline features of the ZnO phase, but also to the phytochemical profile of the extract used. Such eco-friendly materials represent valuable candidates for wound dressing applications due to their ability to support wound healing, relief burns, and skin irritation, provide antimicrobial protection, promote skin regeneration and reduce scarring, protect sensitive skin, and act as a barrier against external contaminants. Full article

Three crosslinked polyurethane copolymers were successfully synthesized as polymeric solid–solid phase change materials (SSPCMs) for thermal energy storage. These materials were fabricated utilizing trihydroxy compounds (glycerol, triethanolamine, and trimethylolethane) as chain extenders and polyethylene glycol (PEG) as the phase change functional segment. A comprehensive suite of characterization techniques was employed to investigate the chemical structures, thermal properties, and crystalline behaviors of the resulting SSPCMs. Fourier transform infrared (FTIR) spectroscopy confirmed the successful synthesis of the crosslinked polyurethane network. Polarizing optical microscopy (POM) and wide-angle X-ray diffraction (WAXD) analyses revealed that all three SSPCMs exhibit regular spherulitic morphologies with sharp diffraction peaks resembling those of pure PEG, although variations in spherulite size and diffraction intensity were observed among the samples. Differential scanning calorimetry (DSC) demonstrated the reversible latent heat storage and release capabilities of the synthesized SSPCMs, with a maximum endothermic enthalpy (ΔH_endo) of 115.7 J/g. Furthermore, thermal cycling tests and thermogravimetric (TG) analysis verified their exhibit excellent reusability, thermal reliability, and high thermal stability. Full article

In this study, a polyethylene glycol (PEG)-based solid electrolyte composite (PEG)₁₀LiClO₄/NaAlOSiO suitable for anodic bonding packaging was successfully fabricated via a combined ball milling and hot pressing process. The micromorphology, ion transport characteristics, and mechanical packaging properties of the composite were systematically investigated using characterization techniques including electrochemical impedance spectroscopy, X-ray diffraction, scanning electron microscopy, and anodic bonding performance tests. The results demonstrate that doping with NaAlOSiO molecular sieve can effectively reduce the crystallinity of the polymer matrix, construct more efficient carrier transport pathways, and simultaneously enhance the ionic conductivity and mechanical properties of the material. When the mass fraction of NaAlOSiO doping is 8 wt.%, the composite exhibits a room temperature ionic conductivity of up to 1.31 × 10⁻⁵ S·cm⁻¹. Under room temperature and a bonding voltage of 800 V, the sample with this doping ratio achieves the optimal anodic bonding with metallic Al, and the tensile strength of the bonding interface reaches 5.93 MPa, showing excellent application prospects in micro–nano-packaging. Full article

This work investigated the potential of different natural fillers, i.e., clay, calcium carbonate, and silica, as sustainable alternatives to glass fibers (GFs) in polyamide 6 (PA6) for Large-Format Additive Manufacturing (LFAM) applications in order to guarantee the chemical recyclability of the produced materials. Specifically, PA6-based composites containing ≤ 10 wt% natural fillers were compared with a conventional system (30 wt% GF-reinforced PA6) from rheological, morphological and thermo-mechanical perspectives. Rheological analysis showed that silica- and clay-filled samples displayed similar rheological response to the GF-filled reference due to their large particle size. Thermal analyses revealed a slight increase in crystallinity (up to 32%) for filled samples, indicating a potential nucleating effect of the natural fillers. Calcium carbonate-filled composites achieved thermal conductivity values comparable to the GF-filled reference (≥0.42 W/mK) indicating a high heat dissipation capability during printing operations. Morphological analysis performed on preliminary LFAM components revealed satisfactory printing quality and good filler dispersion. Flexural tests showed that silica and calcium carbonate could provide a balanced mechanical response, thereby reducing the anisotropy of printed components. These results demonstrated that the addition of suitable natural fillers at limited concentrations (≤10 wt%) can represent a lightweight and eco-sustainable alternative to GF reinforcement in LFAM applications. Full article

Native cellulose I can be converted into crystalline polymorphs II and III_I, while cellulose II can be further converted into III_II through chemical treatments that induce significant structural, physical, and chemical changes. Accurate identification and differentiation of these polymorphs is essential for predicting fiber reactivity and processing behavior, but current methods are time-consuming. This study demonstrates the potential of near-infrared hyperspectral imaging (HSI-NIR) combined with linear discriminant analysis as a rapid, non-destructive tool for polymorph discrimination. Cellulose I, II, III_I, and III_II were produced from bleached kraft pulps of eucalyptus and pine and from cotton linters using NaOH (20% w/v) and ethylenediamine treatments. HSI-NIR successfully differentiated polymorphs based on spectral signatures in the 1480–1600 nm range, regardless of botanical source. Complementary characterization by XRD confirmed polymorph conversions, showing crystallinity reductions of 10–15% for cellulose I→II and I→III_I conversions, with crystallite size decreasing from 7.2 nm (cotton CI) to 3.2–3.4 nm in all CIII_II samples. XPS analysis revealed increased C-O surface accessibility in cellulose II and III, with complete disappearance of COOH groups in cellulose III samples. These results establish HSI as a promising screening tool for cellulose polymorph identification (>95% classification accuracy) and provide comprehensive baseline data on structural and chemical transformations that govern fiber reactivity in chemical and enzymatic processes. Full article

Variations in the particle size of cereal flour could influence its techno-functional properties and affect the quality of the end products. In this study, common buckwheat (Fagopyrum esculentum) seeds were milled and then sieved into five fractions (≥200, 150–200, 100–150, 80–100, and 60–80 mesh). Proximate analysis showed that the protein and ash contents of buckwheat flour decreased with decreased particle size, whereas the starch content increased. Reducing the particle size did not change the A-type crystalline structure and the short-range ordered structure of buckwheat starch, whereas the buckwheat batter flowability, foaming properties and foam stability of the batter supernatant increased. The steamed buckwheat cakes made from ≥100-mesh flour showed a desirable appearance, cross-sectional structure, color, flavor, and texture. Pearson correlation analysis revealed that the starch content and relative crystallinity of buckwheat flour were significantly positively correlated with its pasting parameters and the textural properties (springiness, cohesiveness, resilience) and overall acceptability of steamed buckwheat cake, whereas the protein, lipid, and β-sheet content of buckwheat flour showed the opposite trend. This study demonstrated that differential sieving caused a difference in particle size and chemical composition, which were key variables governing the processing performance of buckwheat flour and important to the quality of its end products. Full article

As a novel organic semiconductor derived from biomass, hydrothermal carbonation carbon (HTCC) usually exhibits an amorphous structure due to its well-recognized formation pathway based on 5-hydroxymethylfurfural (HMF), which impedes charge transfer and consequently restricts the photocatalytic activity. Herein, we report a crystalline HTCC photocatalyst produced via an unusual synthesis route applied to cellulose in the presence of an oxidant. Notably, the crystalline structure of cellulose was retained and became highly aromatized during the process, leading to significantly enhanced charge transfer efficiency and an increased density of active sites. Moreover, unlike other reported HTCC photocatalysis, the highly active hydrogen radicals (H•) were identified as the dominant active species governing photocatalytic Cr(VI) reduction over crystalline HTCC. As a result, this crystalline HTCC exhibited dramatically enhanced photocatalytic removal efficiencies of Cr(VI) and microcystin-LR (MC-LR) due to the highly efficient charge transfer, abundant active sites as well as highly active hydrogen radicals. Full article