Search Results (41)

Crustacean processing industries, particularly those that process shrimp, crab, and lobster, generate substantial quantities of biological waste, consisting primarily of shells, heads, and exoskeletons. These by-products contribute significantly to environmental pollution due to their high organic load, slow degradability, and improper disposal practices. Nevertheless, they represent valuable reservoirs of bioactive compounds such as chitin, proteins, polyunsaturated fatty acids, carotenoids, and minerals, as well as biologically active enzymes and enzyme inhibitors, which possess immense potential in food, pharmaceutical/cosmetic, biomedical and environmental sectors. Unlike previous studies that primarily focus on individual components or specific extraction techniques, this review comparatively evaluates both conventional extraction techniques (acid–alkali treatment and solvent extraction) and emerging green approaches (supercritical fluid extraction, enzymatic hydrolysis, pulsed electric fields, ultrasound-assisted extraction, cold plasma, microwave-assisted extraction and high-pressure processing), highlighting their efficiencies, sustainability, and influence on compound quality. The review study further explores the diverse applications of the recovered constituents in food preservation, nutraceutical development, biodegradable packaging, and functional ingredient formulation. Moreover, current challenges concerning process optimization, industrial scalability, economic feasibility, and environmental impact are critically evaluated. Full article

It is crucial to develop advanced fluorescence sensing platforms for precise detection of metal pollutants in environmental monitoring. However, traditional fluorescent probes are often limited by aggregation-caused quenching (ACQ). In contrast, clusterization-triggered emission (CTE) probes, based on non-conjugated systems, exhibit excellent photostability by relying on spatial clusterization to restrict molecular motion. Crab shells, an abundant aquatic waste, are rich in chitin (20–30%). Following deacetylation, chitin is converted into chitosan, a biocompatible and biodegradable biopolymer with excellent potential for chemical modification. In this study, a novel chitosan-based CTE fluorescent probe (CS-FA) was synthesized via a facile cross-linking condensation reaction between chitosan and formaldehyde. This process successfully restricts intramolecular motion and promotes the tight clustering of electron-rich heteroatoms, thereby activating the CTE mechanism. The resultant CS-FA probe exhibits strong and stable blue fluorescence and demonstrates high selectivity and sensitivity toward Fe³⁺ in aqueous media. In the concentration range of 10–100 µM, the fluorescence intensity decreases linearly with the Fe³⁺ concentration, yielding a competitive limit of detection (LOD) of 0.52 µM. Mechanistically, the specific coordination between Fe³⁺ and the cross-linked polymer provides a dominant non-radiative decay pathway, leading to significant fluorescence quenching. Ultimately, this work not only proposes an innovative strategy for constructing sensitive and biomass-derived probes for Fe³⁺ monitoring but also broadens the high-value utilization pathways of marine waste, thereby providing a sustainable waste-to-resource strategy. Full article

The growing demand for sustainable construction materials has stimulated interest in alternative binders derived from waste resources. This study investigates the use of calcined crab shell (CCS), a calcium-rich marine biowaste, as a partial replacement for Portland limestone cement. Cement pastes containing 0%, 5%, 10%, and 15% CCS were prepared and evaluated through compressive strength, water absorption, open porosity, bulk density, SEM, XRD, FTIR, and TGA analyses. The results showed that incorporating 10% CCS produced the most favorable performance, increasing compressive strength from 17.6 MPa to 33.6 MPa after 28 days of curing. This improvement was accompanied by reduced porosity, increased bulk density, and the development of a denser and more homogeneous microstructure. Physicochemical analyses suggest that CCS acts both as a filler and as a source of reactive calcium species. The CaO generated during calcination may participate in hydration processes and influence the formation of hydration products, contributing to matrix densification. In contrast, the incorporation of 15% CCS resulted in increased porosity, a less homogeneous microstructure, and lower mechanical performance. These findings indicate that replacing Portland limestone cement with up to 10% CCS can improve the properties of cement pastes while promoting the valorization of marine shell waste and reducing cement consumption, thereby supporting the development of more sustainable construction materials. Full article

Green roofs offer significant potential for urban stormwater management, yet their capacity to improve runoff water quality is constrained by the limited pollutant retention of conventional substrates and inherent nutrient leaching risks. This critical review synthesizes recent advances in substrate engineering and phytoremediation to establish an integrated framework for transforming green roofs into active bio-filtration systems. Our analysis reveals that amending conventional substrates with waste-derived biosorbents substantially enhances heavy metal and nutrient retention through complementary mechanisms of surface complexation, ion exchange, and microprecipitation. When strategically coupled with hyperaccumulator plant species and rhizospheric microbial communities, these amended substrates significantly reduce contaminant loads in urban runoff while maintaining hydraulic functionality. We critically evaluate standard growing media versus substrates amended with targeted biosorbents: biochar, which enhances heavy metal retention and hydraulic conductivity via surface complexation; seaweed biomass, which provides superior water retention and cation exchange while reducing synthetic fertilizer dependence; and chitin-rich crab shell waste, which promotes microprecipitation of metals and phosphates while valorizing marine waste. The novelty resides not in the materials themselves, but in their synergistic combination and the systematic comparative analysis of their retention mechanisms under green roof hydrological conditions. This review further identifies critical engineering trade-offs, including biosorbent-induced hydraulic conductivity reductions and long-term adsorption site saturation, and provides actionable design thresholds for amendment dosing, substrate depth, and species selection. Ultimately, this work establishes a mechanistic and practical roadmap for next-generation green roofs that simultaneously optimize stormwater retention, runoff quality, and circular economy valorization, highlighting priority research directions for long-term field validation and climate-adaptive standardization. Full article

Traditional fossil-based adhesives, hindered by issues such as formaldehyde emission, dependence on fossil resources, and poor biodegradability, struggle to meet the global demand for low-carbon green development. Biomass-based adhesives have thus emerged as a core alternative. Among them, chitin/chitosan derived from biomass waste such as shrimp and crab shells demonstrates significant potential in the adhesive field due to its renewability, controllable structure, biocompatibility, and inherent antibacterial properties. However, mainstream biomass adhesives like soy protein and starch adhesives suffer from poor water resistance and insufficient wet adhesion strength. Pure chitin/chitosan-based adhesive systems also exhibit low wet strength retention. Furthermore, the overall development faces challenges including high extraction costs, insufficient performance synergy, poor industrial compatibility, and a lack of standardized systems. This review follows the framework of “resource–extraction–modification–performance–application–challenges” to systematically summarize relevant research progress. It clarifies the molecular structure and intrinsic advantages of chitin/chitosan, outlines extraction processes such as acid/alkali and enzymatic methods, and characterization techniques including FT-IR and XRD. The review focuses on analyzing modification strategies such as composite modification, chemical modification, biomineralization, and biomimetic design, and verifies the application potential of these adhesives in wood processing, biomedicine, paper-based packaging, and other fields. Research indicates that chitin/chitosan-based adhesives provide an effective pathway for the green transformation of the adhesive industry. Future efforts should concentrate on developing green extraction processes, designing multifunctional integrated systems, and achieving full resource utilization of biomass. Additionally, establishing comprehensive standardized systems and promoting the translation of laboratory research into industrial applications are crucial to driving the industry’s green transition. Full article

In this work, we developed and characterized a hydroxyapatite (HA) ceramic coating derived from Ucides cordatus crab-shell waste and applied it onto Ti–Al–V titanium substrates for biomedical use. Substrate analysis confirmed an α + β two-phase microstructure and Rockwell C hardness of ~35 HRC; optical emission spectrometry indicated a non-conforming Ti–6Al–4V composition (Al slightly above and V slightly below ASTM F136-18 limits), with expected α-phase predominance. Aqueous synthesis of biogenic HA used CaO (from 800 °C calcined shells) reacted with β-tricalcium phosphate (β-Ca₃(PO₄)₂), followed by deposition onto Ti–Al–V surfaces prepared with or without a thermochemical treatment that homogenized roughness (Ra ≈ 0.587 µm). The coatings were continuous, ~95–98 µm thick, and showed good qualitative adhesion. Scanning Electron Microscopy (SEM) revealed porous, nanocrystalline, acicular morphologies typical of biogenic apatite’s. Energy-Dispersive X-ray Spectroscopy (EDS) yielded Ca/P ≈ 1.85–1.88, while X-ray Fluorescence (XRF) indicated Ca-enrichment relative to stoichiometric HA. X-ray Diffraction (XRD) confirmed a predominantly hexagonal HA phase with high crystallinity. These results demonstrate a technically and environmentally feasible route to bioactive coatings using marine biowaste, aligning low-cost, local waste valorization with functional performance on titanium implants. Full article

Seafood-derived carbonate waste, primarily calcium carbonate (CaCO₃), has attracted growing interest for sustainable reuse, yet the unique potential of aged biogenic sources remains underexplored. Blue crab (Callinectes sapidus) shells are particularly distinctive: they consist of Mg-calcite with an intrinsic 3D-porous structure and naturally embedded astaxanthin, a potent antioxidant not found in other calcite- or aragonite-based residues. While organic degradation over time is often assumed to compromise functionality, this study demonstrates that five-years-aged crustacean shell waste retains both its crystallinity and bioactive carotenoids after calibrated ball milling. Across four powder batches produced under distinct milling conditions by varying frequencies and durations, dynamic light scattering confirmed only subtle particle size variation, while Raman spectroscopy, XRD, FT-IR, and SEM-EDX confirmed structural and chemical integrity and highlighted the subtle amorphization induced by slightly different milling parameters, which, in turn, driven to slightly different conversion efficiency into phosphate mineral. Strikingly, all powders underwent rapid transformation into dicalcium phosphate dihydrate (brushite) enriched with carotenoids upon reaction with phosphoric acid. This work reveals, for the first time, that years-aged biogenic Mg-calcite waste not only preserves its naturally embedded carotenoids but also offers a direct route to functional phosphate composites, establishing its untapped value in environmental and biomedical applications. Full article

Seafood waste is often landfilled and/or discarded into water, raising microbiological pollution and environment policy concerns. Repurposing this low-cost biomass collected at point-source processing centers can help reduce greenhouse gas emissions and support industrial progress in developing economies. Safe alternative methods to utilize seafood waste were investigated. Hydrothermal carbonization-enriched shrimp shell waste was converted into higher-value products, such as sprayable fertilizer and dry biochar fertilizer pellets. Environment friendly sprayable fertilizer from shrimp and crab shell waste as an inexpensive carbon fixer is a potential solution. An average spray coverage area of 0.12 m² from only 300 mL of 1:10 shrimp shell waste to water mixture is reported. Characterization using N:P:K ratios from elemental analysis showed crustacean shell waste to comprise long-term organic carbon fixers in the soil with minor mineral enrichment, demonstrating potential for long-term soil care. Additionally, hydrothermally carbonized mineral rich shrimp shell and untreated crab shell waste were pelletized to test their friability and feasibility in transportation. Such a bio-investigation to promote economic goals for sustainability can improve biomass waste handling locally. Full article

With the development of the aquatic products processing industry, 6–8 million tons of shrimp and crab shell waste are produced globally annually, but, due to the lack of high-value conversion technology, crab shells are often discarded in large quantities as a by-product of processing. Pseudomonas-based microbial cell factories are capable of biosynthesis of high-value products using a wide range of substrates; however, there is currently no reliable fermentation model for producing high-value chemicals using crab shell waste by Pseudomonas strains. In this study, we first explored the culture conditions of shell fermentation using KT2440 through single-factor and orthogonal experiments, and the optimized fermentation parameters obtained are given as follows: a temperature of 30 °C, fermentation time of 42 h, substrate solid–liquid ratio of 7%, and rotational speed of 200 rpm. After optimization, the maximum cell growth was increased by 64.39% from 350.67 × 10⁸ CFU/mL to 576.44 × 10⁸ CFU/mL. Combined with engineering modification, two engineered strains, KT_+IV and KT_+lasBT, expressing exogenous proteases, were obtained, and the maximum growth was increased from 316.44 × 10⁸ CFU/mL to 1268.44 × 10⁸ CFU/mL and 616.89 × 10⁸ CFU/mL, which were 300.84% and 94.94% higher, respectively. In addition, the engineered strain KT_+NtrcT-D55E, which regulates nitrogen metabolism, was obtained, and the accumulation of intracellular polyhydroxy fatty acid esters (PHA) was increased from 20.00 mg/L to 78.58 mg/L, which was a significant increase of 292.93% relative to the control group. This study provides a theoretical basis and technical support for the high-value utilization of shrimp and crab shell resources and the development of environmentally friendly bioproducts. Full article

Nanochitin was developed to effectively utilize crab shells, a food waste product, and there is ongoing research into its applications. Short nanowhiskers were produced by sonicating partially deacetylated nanochitin in water, resulting in a significant decrease in viscosity due to reduced entanglement of the nanowhiskers. These nanowhiskers self-assembled into a multilayered film through an evaporation technique. The macro- and nanoscale structures within the film manipulate light, producing vibrant and durable structural colors. The dried cast film exhibited green and purple stripes extending from the center to the edge formed by interference effects from the multilayer structure and thickness variations. Preserving structural colors requires maintaining a low ionic strength in the dispersion, as a higher ionic strength reduces electrostatic repulsion between nanofibers, increasing viscosity and potentially leading to the fading of color. This material’s sensitivity to environmental changes, combined with chitin’s biocompatibility, makes it well-suited for food sensors, wherein it can visually indicate freshness or spoilage. Furthermore, chitin’s stable and non-toxic properties offer a sustainable alternative to traditional dyes in cosmetics, delivering vivid and long-lasting color. Full article

The blue crab (Callinectes sapidus), originally from the western Atlantic Ocean, has recently spread to the Mediterranean and is now considered one of the one hundred most invasive species in that region. This opportunistic species, known for its adaptability to different temperatures and salinities, negatively impacts biodiversity and human activities such as fishing and tourism in the Mediterranean. However, the blue crab is gaining interest as a potential food resource due to its high nutritional value and delicate, sweet flavor. Its meat is rich in protein (14% to 30%), omega-3 fatty acids (EPA and DHA) and other essential nutrients beneficial for human health such as vitamins, and minerals. Utilizing this species in the production of new foods could help mitigate the negative impact of its invasiveness and offer economic opportunities. One challenge with this potential resource is the generation of waste. Approximately 6–8 million tonnes of crab shells are produced worldwide each year, leading to disposal problems and concerns regarding environmental sustainability. To improve economic and environmental sustainability, there is a need to valorize these residues, which are an important source of proteins, lipids, chitin, minerals, and pigments that can be processed into high-value-added products. However, especially in areas with industrial pollution, attention should be paid to the heavy metal (Cd and As) contents of blue crab shells. Studies suggest that blue crab by-products can be used in various sectors, reducing environmental impacts, promoting a circular economy, and creating new industrial opportunities. Full article

The snow/pink crab (Chionoecetes opilio) and Northern shrimp (Pandalus borealis) are widely distributed in the North Atlantic Ocean. During processing/consumption, about 80% of the harvest is discarded as processing waste, which is a rich source of protein, chitin, minerals, and carotenoids. This study, for the first time, investigated the proximate composition and individual amino acids, minerals, and carotenoids from different body parts (carapace, shoulder, claw, tip, and leg) of snow crabs and shrimp shells. Shrimp proteins were found to be abundant and well-balanced in their amino acid composition. Compared to shrimp shells, a lower content of amino acids was found in the snow crab, depending on the part of the shell used. Moreover, crab shells, mainly crab claws, contained a higher (p < 0.05) level of chitin compared to shrimp shells. Seven micro-elements (Mn, Fe, Cu, Zn, As, Ba, and Ce) and six macro-elements (Ca, Na, K, Mg, P, and Sr) were identified using inductively coupled plasma-mass spectrometry (ICP-MS). Among them, calcium and iron were higher in crab carapaces (p < 0.05), followed by shrimp shells and other crab shell segments. Additionally, shrimp and crab carapaces contained a significant level of carotenoids, and these were mainly composed of astaxanthin and its mono- and diesters, along with zeaxanthin, astacene, canthaxanthin, and lutein. Thus, this investigation provides detailed information to allow upcycling of shellfish waste and addresses the knowledge gap concerning the availability of various nutrients in different crab sections and shrimp shells. Full article

Bone tissue engineering (BTE) provides an alternative for addressing bone defects by integrating cells, a scaffold, and bioactive growth factors to stimulate tissue regeneration and repair, resulting in effective bioengineered tissue. This study focuses on repurposing chitosan from blue swimming crab (Portunus pelagicus) shell waste as a composite scaffold combined with HAP and COL I to improve biocompatibility, porosity, swelling, and mechanical properties. The composite scaffold demonstrated nearly 60% porosity with diameters ranging from 100–200 μm with an interconnected network that structurally mimics the extracellular matrix. The swelling ratio of the scaffold was measured at 208.43 ± 14.05%, 248.93 ± 4.32%, 280.01 ± 1.26%, 305.44 ± 20.71%, and 310.03 ± 17.94% at 1, 3, 6, 12, and 24 h, respectively. Thus, the Portunus pelagicus scaffold showed significantly lower degradation ratios of 5.64 ± 1.89%, 14.34 ± 8.59%, 19.57 ± 14.23%, and 29.13 ± 9.87% for 1 to 4 weeks, respectively. The scaffold supports osteoblast attachment and proliferation for 7 days. Waste from Portunus pelagicus shells has emerged as a prospective source of chitosan with potential application in tissue engineering. Full article

In recent years, natural fiber-reinforced hybrid composites have been utilized in many applications because of their lower cost, biodegradability, and low density. The aim of this research is to convert crab shell waste into an effective reinforcement in jute/carbon fiber hybrid composites. Various weight percentages of crab shell powder (0%, 1%, 3%, 5%, and 7%) were used to prepare crab shell powder hybrid composites. The performance of the crab shell powder hybrid composites was evaluated by preparing the specimens to conduct tensile, flexural, impact, and hardness tests as per ASTM standards. The results show that the inclusion of 5% crab shell powder displayed a better enhancement in the properties of the hybrid composite compared to other weight percentages. The tensile, flexural, and impact strengths of the 5% crab shell powder hybrid composite increased by 21%, 52%, and 50%, respectively. Also, the hardness of the hybrid composite was enhanced by 33%. Scanning electron microscopy (SEM) tests were conducted on the tensile-fractured specimen surfaces, and their morphology and structure confirmed the presence of a well-bonded interface between the fiber and matrix. Differential Scanning Calorimetry (DSC) and Thermogravimetry (TG) analysis have shown that the crystallization behavior and thermal stability of the composite were enhanced with the inclusion of crab shell powder. The presence of crab shell powder in the hybrid composite was identified using SEM with Energy-Dispersive X-ray Spectroscopy (EDS). Full article

The direct enzymatic conversion of untreated waste shrimp and crab shells has been a key problem that plagues the large-scale utilization of chitin biological resources. The microorganisms in soil samples were enriched in two stages with powdered chitin (CP) and shrimp shell powder (SSP) as substrates. The enrichment microbiota XHQ10 with SSP degradation ability was obtained. The activities of chitinase and lytic polysaccharide monooxygenase of XHQ10 were 1.46 and 54.62 U/mL. Metagenomic analysis showed that Chitinolyticbacter meiyuanensis, Chitiniphilus shinanonensis, and Chitinimonas koreensis, with excellent chitin degradation performance, were highly enriched in XHQ10. Chitin oligosaccharides (CHOSs) are produced by XHQ10 through enzyme induction and two-stage temperature control technology, which contains CHOSs with a degree of polymerization (DP) more significant than ten and has excellent antioxidant activity. This work is the first study on the direct enzymatic preparation of CHOSs from SSP using enrichment microbiota, which provides a new path for the large-scale utilization of chitin bioresources. Full article