Search Results (14)

This study developed cholesteric liquid crystal broadband reflective films using zinc oxide nanoparticles (ZnO NPs) and homotriazine UV-absorbing dye (UV-1577) to enhance infrared shielding. Unlike benzotriazole-based UV absorber UV-327, which suffers from volatility and contamination, UV-1577 exhibits superior compatibility with liquid crystals, higher UV absorption efficiency, and enhanced processing stability due to its larger molecular structure. By synergizing UV-1577 with ZnO NPs, we achieved a gradient UV intensity distribution across the film thickness, inducing a pitch gradient that broadened the reflection bandwidth to 915 nm and surpassing the performance of previous systems using UV-327/ZnO NPs (<900 nm). We conducted a detailed examination of the factors influencing the reflective bandwidth. These included the UV-1577/ZnO NP ratio, the concentrations of the polymerizable monomer (RM257) and chiral dopant (R5011), along with polymerization temperature, UV irradiation intensity, and irradiation time. The resultant films demonstrated efficient ultraviolet shielding via the UV-1577/ZnO NPs collaboration and infrared shielding through the induced pitch gradient. This work presents a scalable strategy for energy-saving smart windows. Full article

Pyrrolizidine alkaloids (PAs) are a class of nitrogen-containing basic organic compounds that are frequently detected in foods and herbal medicines. Owing to their potential hepatotoxic, genotoxic, and carcinogenic properties, PAs have become a significant focus for monitoring global food safety. In this study, an ultra-high-performance liquid chromatography–tandem mass spectrometry (UHPLC–MS/MS) method was developed for the detection and analysis of three foods (tea, honey, and milk) susceptible to PA contamination. This optimized method effectively separated and detected three types of PAs, namely, three pairs of isomers and two pairs of chiral compounds. The limits of detection (LODs) and limits of quantification (LOQs) were determined to be 0.015–0.75 and 0.05–2.5 µg/kg, respectively, with the relative standard deviations (RSDs) of both the interday and intraday precisions remaining below 15%. The average PA recoveries from the honey, milk, and tea matrices fell within the ranges of 64.5–103.4, 65.2–112.2, and 67.6–107.6%, respectively. This method was also applied to 77 samples collected from 33 prefecture-level cities across 16 provinces and included 40 tea, 6 milk, 8 honey, 14 spice, and 9 herbal medicine samples. At least one PA was detected in twenty-three of the samples, with herbal medicines exhibiting the highest total PA content. The obtained results indicate that the developed method demonstrated good repeatability and stability in the detection and quantitative analyses of PAs in food- and plant-derived samples. This method is therefore expected to provide reliable technical support for food safety risk monitoring. Full article

Improved methods for the synthesis of nicotine are of great importance due to the wide range of applications of synthetic nicotine, which is free from contamination with nitrosamines. Herein, we present a four-step chemical synthesis of (S)-nicotine, involving the reduction in myosmine, enantiomeric separation of nornicotine, and subsequent methylation of the appropriate enantiomer of nornicotine obtained. The reduction in myosmine was investigated using both electrochemical and chemical approaches, achieving up to 90% yields of pure nornicotine. To achieve the enantioseparation of nornicotine, its diastereomeric salts with chiral acids, specifically, N-lauroyl-(R)-alanine, were obtained in a mixture of methyl tert-butyl ether (MTBE) and chloroform, which led to the isolation of (S)-nornicotine with 92% ee. The structures of the obtained salts were determined by the X-ray diffraction (XRD) technique, which helped to explain the origin of enantiodiscrimination during the crystallization. The described methodology allows efficient regeneration of the reagents and solvents used, leading to cost-effective production of (S)-nicotine suitable for industrial-scale applications. Full article

Chiral analysis is a very relevant topic in environmental chemistry. This is due to the different properties of the stereoisomers of chiral compounds. In the case of agrochemicals, the desired activity, degradation rate, or toxicity, among other characteristics, may differ between stereoisomers, and the same is true for emerging contaminants, such as pharmaceuticals and cosmetics. Therefore, the development of chiral analytical methodologies enabling their determination in samples of environmental interest is paramount. Although other techniques have been widely employed to carry out chiral separations, such as HPLC, GC, and SFC, capillary electrophoresis (CE) has attracted a lot of attention in the field of chiral analysis due to its simplicity, flexibility, and low cost. In fact, chromatographic columns are not needed, and the consumption of reagents and samples is very low due to the small dimensions of the separation capillaries. This article reviews the characteristics of the chiral methodologies developed by CE for the stereoselective analysis of pesticides and emerging contaminants in environmental samples (water and soil), as well as pesticides in food samples and commercial agrochemical formulations. Applications of the developed CE methodologies in stability and toxicity studies of these chiral contaminants are also reviewed. Full article

Tomato and cucumber are two vital edible vegetables that usually appear in people’s daily diet. Penthiopyrad is a new type of amide chiral fungicide, which is often used for disease control of vegetables (including tomato and cucumber) due to its wide bactericidal spectrum, low toxicity, good penetration, and strong internal absorption. Extensive application of penthiopyrad may have caused potential pollution in the ecosystem. Different processing methods can remove pesticide residues from vegetables and protect human health. In this study, the penthiopyrad removal efficiency of soaking and peeling from tomatoes and cucumbers was evaluated under different conditions. Among different soaking methods, heated water soaking and water soaking with additives (NaCl, acetic acid, and surfactant) presented a more effective reduction ability than other treatments. Due to the specific physicochemical properties of tomatoes and cucumbers, the ultrasound enhances the removal rate of soaking for tomato samples and inhibits it for cucumber samples. Peeling can remove approximately 90% of penthiopyrad from contaminated tomato and cucumber samples. Enantioselectivity was found only during tomato sauce storage, which may be related to the complex microbial community. Health risk assessment data suggests that tomatoes and cucumbers are safer for consumers after soaking and peeling. The results may provide consumers with some useful information to choose better household processing methods to remove penthiopyrad residues from tomatoes, cucumbers, and other edible vegetables. Full article

Environmentally relevant contaminants endowed with chirality may include pharmaceutical compounds, flame retardants, perfluoroalkyl chemicals, pesticides, and polychlorinated biphenyls. Despite having similar physicochemical properties, enantiomers may differ in their biochemical interactions with enzymes, receptors, and other chiral molecules leading to different biological responses. In this work, we have designed a wireless miniaturized stereoselective light-emitting system able to qualitatively detect a chiral contaminant (3,4-dihydroxyphenylalanine, DOPA) dissolved in reduced volumes (in the microliters range), through bipolar electrochemistry. The diastereomeric environment was created by mixing the enantiomers of an inherently chiral inductor endowed with helical shape (7,8-dipropyltetrathia[7]helicene) and the chiral probe (DOPA) in micro-solutions of a commercial ionic liquid. The synergy between the inductor, the applied electric field, and the chiral pollutant was transduced by the light emission produced from a miniaturized light-emitting diode (LED) exploited in such an approach as a bipolar electrode. Full article

A comparative analysis of the chemical constituents present in twenty-one commercial and two lab-distilled frankincense (Boswellia carteri) essential oils was carried out using gas chromatography-mass spectrometry (GC-MS) and chiral gas chromatography-mass spectrometry (CGC-MS) for authentication. Out of the twenty-one commercial samples, six were adulterated with synthetic limonene, three were contaminated with synthetic octyl acetate, three were adulterated with castor oil, and two samples each were contaminated with frankincense resin and Boswellia occulta species, respectively, and one was contaminated with the Boswellia serrata species. Additionally, one sample was contaminated with phthalates as well as a cheap essential oil with similar compositions. Furthermore, one sample was adulterated with copaiba resin and frankincense resin in combination with synthetic octyl acetate. Additionally, one was contaminated with Boswellia serrata species, which was further adulterated with castor oil and frankincense resin. To the best of our knowledge, this is the first report to compare the enantiomeric distribution of chiral terpenoids present in commercial frankincense essential oil with lab-distilled frankincense oil for authentication. The CGC-MS analysis showed the presence of a total of eight chiral terpenoids in lab-distilled frankincense essential oils, which can be used as chemical fingerprints for the authentication of frankincense essential oil. Full article

The increasing concern about chiral pharmaceutical pollutants is connected to environmental contamination causing both chronic and acute harmful effects on living organisms. The design and application of sustainable surfactants in the remediation of polluted sites require knowledge of partitioning between surfactants and potential pollutants. The interfacial and thermodynamic properties of two gemini surfactants, namely, alkanediyi-α,ω-bis(dimethylhexadecyl ammonium bromide) (16-s-16, where s = 10, 12), were studied in the presence of the inherently biodegradable oxime-functionalized ionic liquid (IL) 4-((hydroxyimino)methyl)-1-(2-(octylamino)-2-oxoethyl)pyridin-1-ium bromide (4-PyC8) in an aqueous solution using surface tension, conductivity, fluorescence, FTIR and ¹H NMR spectroscopic techniques. The conductivity, surface tension and fluorescence measurements indicated that the presence of the IL 4-PyC8 resulted in decreasing CMC and facilitated the aggregation process. The various thermodynamic parameters, interfacial properties, aggregation number and Stern–Volmer constant were also evaluated. The IL 4-PyC8-gemini interactions were studied using DLS, FTIR and NMR spectroscopic techniques. The hydrodynamic diameter of the gemini aggregates in the presence of promethazine (PMZ) as a potential chiral pollutant and the IL 4-PyC8 underwent a transition when the drug was added, from large aggregates (270 nm) to small micelles, which supported the gemini:IL 4-PyC8:promethazine interaction. The structural transitions in the presence of promethazine may be used for designing systems that are responsive to changes in size and shape of the aggregates as an analytical signal for selective detection and binding pollutants. Full article

The Fusarium mycotoxin deoxynivalenol (DON) is a common contaminant of cereals and is often co-occurring with its modified forms DON-3-glucoside (D3G), 3-acetyl-DON (3ADON) or 15-acetyl-DON (15ADON). A stable-isotope dilution liquid chromatography-tandem mass spectrometry (LC-MS/MS) based method for their determination in cereals was developed and validated for maize. Therefore, ¹³C-labelled D3G was enzymatically produced using ¹³C-DON and [¹³C₆Glc]-sucrose and used as an internal standard (IS) for D3G, while uniformly ¹³C labelled IS was used for the other mycotoxins. Baseline separation was achieved for the critical peak pair DON/D3G, while 3ADON/15ADON could not be fully baseline separated after testing various reversed phase, fluorinated phase and chiral LC columns. After grinding, weighing and extracting the cereal samples, the raw extract was centrifuged and a mixture of the four ¹³C-labelled ISs was added directly in a microinsert vial. The subsequent analytical run took 7 min, followed by negative electrospray ionization and selected reaction monitoring on a triple quadrupole MS. Maize was used as a complex cereal model matrix for validation. The use of the IS corrected the occurring matrix effects efficiently from 76 to 98% for D3G, from 86 to 103% for DON, from 68 to 100% for 15ADON and from 63 to 96% for 3ADON. Full article

Supramolecular chemistry, although focused mainly on noncovalent intermolecular and intramolecular interactions, which are considerably weaker than covalent interactions, can be employed to fabricate sensors with a remarkable affinity for a target analyte. In this review the development of cyclodextrin-based electrochemical sensors is described and discussed. Following a short introduction to the general properties of cyclodextrins and their ability to form inclusion complexes, the cyclodextrin-based sensors are introduced. This includes the combination of cyclodextrins with reduced graphene oxide, carbon nanotubes, conducting polymers, enzymes and aptamers, and electropolymerized cyclodextrin films. The applications of these materials as chiral recognition agents and biosensors and in the electrochemical detection of environmental contaminants, biomolecules and amino acids, drugs and flavonoids are reviewed and compared. Based on the papers reviewed, it is clear that cyclodextrins are promising molecular recognition agents in the creation of electrochemical sensors, chiral sensors, and biosensors. Moreover, they have been combined with a host of materials to enhance the detection of the target analytes. Nevertheless, challenges remain, including the development of more robust methods for the integration of cyclodextrins into the sensing unit. Full article

The determination of organic and inorganic pollutants in fish samples is a complex and demanding process, due to their high protein and fat content. Various novel sorbents including graphene, graphene oxide, molecular imprinted polymers, carbon nanotubes and metal-organic frameworks (MOFs) have been reported for the extraction and preconcentration of a wide range of contaminants from fish tissue. MOFs are crystalline porous materials that are composed of metal ions or clusters coordinated with organic linkers. Those materials exhibit extraordinary properties including high surface area, tunable pore size as well as good thermal and chemical stability. Therefore, metal-organic frameworks have been recently used in many fields of analytical chemistry including sample pretreatment, fabrication of stationary phases and chiral separations. Various MOFs, and especially their composites or hybrids, have been successfully utilized for the sample preparation of fish samples for the determination of organic (i.e., antibiotics, antimicrobial compounds, polycyclic aromatic hydrocarbons, etc.) and inorganic pollutants (i.e., mercury, palladium, cadmium, lead, etc.) as such or after functionalization with organic compounds. Full article

Hexabromocyclododecane (HBCDD) is an additive brominated flame retardant which has been listed in Annex A of the Stockholm Convention for elimination of production and use. It has been reported to persist in the environment and has the potential for enantiomer-specific degradation, accumulation, or both, making enantioselective analyses increasingly important. The six main stereoisomers of technical HBCDD (i.e., the (+) and (−) enantiomers of α-, β-, and γ-HBCDD) were separated and isolated for the first time using enantioselective packed column supercritical fluid chromatography (pSFC) separation methods on a preparative scale. Characterization was completed using published chiral liquid chromatography (LC) methods and elution profiles, as well as X-ray crystallography, and the isolated fractions were definitively identified. Additionally, the resolution of the enantiomers, along with two minor components of the technical product (δ- and ε-HBCDD), was investigated on an analytical scale using both LC and pSFC separation techniques, and changes in elution order were highlighted. Baseline separation of all HBCDD enantiomers was achieved by pSFC on an analytical scale using a cellulose-based column. The described method emphasizes the potential associated with pSFC as a green method of isolating and analyzing environmental contaminants of concern. Full article

The separation of chiral compounds is an interesting and challenging topic in analytical chemistry, especially in environmental fields. Enantioselective degradation or bioaccumulation has been observed for several chiral pollutants. Polycyclic musks are chiral and are widely used as fragrances in a variety of personal care products such as soaps, shampoos, cosmetics and perfumes. In this study, the gas chromatographic separation of chiral polycyclic musks, 1,3,4,6,7,8-hexahydro-4,6,6,7,8,8-hexamethylcyclo-penta-γ-2-benzopyrane (HHCB), 7-acetyl-1,1,3,4,4,6-hexamethyl-1,2,3,4-tetra-hydronaphthalene (AHTN), 6-acetyl-1,1,2,3,3,5-hexamethylindane (AHDI), 5-acetyl-1,1,2,6-tetramethyl-3-iso-propylindane (ATII), and 6,7-dihydro-1,1,2,3,3-pentamethyl-4(5H)-indanone (DPMI) was achieved on modified cyclodextrin stationary phase (heptakis (2,3-di-O-methyl-6-O-tert-butyl-dimethylsilyl-β-CD in DV-1701)). Separation techniques are coupled to tandem mass spectrometry (MS-MS), as it provides the sensitivity and selectivity needed. River and wastewaters (influents and effluents of wastewater treatment plants (WWTPs)) in the Nakdong River were investigated with regard to the concentrations and the enantiomeric ratios of polycyclic musks. HHCB was most frequently detected in river and wastewaters, and an enantiomeric enrichment was observed in the effluents of one of the investigated wastewater treatment plants (WWTPs). We reported the contamination of river and wastewaters in Korea by chiral polycyclic musks. The results of this investigation suggest that enantioselective transformation may occur during wastewater treatment. Full article

We study the bias induced by a weak (200 mT) external magnetic field on the preferred handedness of sodium chlorate crystals obtained by slow evaporation at ambient conditions of its saturated saline solution with 20 ppm of added racemic (dl) hydrophobic amino acids. By applying the Fisher test to pairs of experiments with opposing magnetic field orientation we conclude, with a confidence level of 99.7%, that at the water-air interface of this saline solution there is an enantioselective magnetic interaction that acts upon racemic mixtures of hydrophobic chiral amino acids. This interaction has been observed with the three tested racemic hydrophobic amino acids: dl-Phe, dl-Try and dl-Trp, at ambient conditions and in spite of the ubiquitous chiral organic contamination. This enantioselective magnetic dependence is not observed when there is only one handedness of added chiral amino-acid, if the added amino acid is not chiral or if there is no additive. This effect has been confirmed with a double blind test. This novel experimental observation may have implications for our view of plausible initial prebiotic scenarios and of the roles of the geomagnetic field in homochirality in the biosphere. Full article