Search Results (536)

A facile and versatile strategy to obtain NPs@ZnAlO nanocomposite materials, comprising controlled-size nanoparticles (NPs) within a ZnAlO matrix is reported. The mono-(Au, Ni) and bimetallic (Ni-Au) NPs serving as an active phase were prepared by the polyol-alkaline method, while the ZnAlO support was obtained via the thermal decomposition of its corresponding layered double hydroxide (LDH) precursors. X-ray diffraction (XRD) patterns confirmed the successful fabrication of the nanocomposites, including the synthesis of the metallic NPs, the formation of LDH-like structure, and the subsequent transformation to ZnO phase upon LDH calcination. The obtained nanostructures confirmed the nanoplate-like morphology inherited from the original LDH precursors, which tended to aggregate after the addition of gold NPs. According to the UV-Vis spectroscopy, loading NPs onto the ZnAlO support enhanced the light absorption and reduced the band gap energy. ATR-DRIFT spectroscopy, H₂-TPR measurements, and XPS analysis provided information about the functional groups, surface composition, and reducibility of the materials. The catalytic performance of the developed nanostructures was evaluated by the photodegradation of bisphenol A (BPA), under simulated solar irradiation. The conversion of BPA over the bimetallic Ni-Au@ZnAlO reached up to 95% after 180 min of irradiation, exceeding the monometallic Ni@ZnAlO and Au@ZnAlO catalysts. Its enhanced activity was correlated with good dispersion of the bimetals, narrower band gap, and efficient charge carrier separation of the photo-induced e⁻/h⁺ pairs. Full article

Recently, a number of natural biologically active substances have been proven to be attractive alternatives to conventional anticancer medicine or as adjuvants in contemporary combination therapies. Although lignin-based materials were previously accepted as waste materials with limited usefulness, recent studies increasingly report the possibility of their use for novel applications in various industrial branches, including biomedicine. In this regard, the safety, efficiency, advantages and limitations of lignin compounds for in vitro/in vivo applications remain poorly studied and described. This study was carried out to investigate the possibility of using newly synthesized, alkali lignin-based micro-/nano-biopolymer formulations (Lignin@Formulations/L@F) as carriers for substances with antioxidant and/or anticancer effectiveness. Moreover, we tried to assess the opportunity for using an electro-assisted approach for achieving improved intracellular internalization. An investigation was conducted on an in vitro panel of breast cell lines, namely two breast cancer lines with different metastatic potentials and one non-tumorigenic line as a control. The characterization of all tested formulations was performed via DLS (dynamic light scattering) analysis. We developed an improved separation procedure via size/charge unification for all types of Lignin@Formulations. Moreover, in vitro applications were investigated. The results demonstrate that compared to healthy breast cells, both tested cancer lines exhibited slight sensitivity after treatment with different formulations (empty or loaded with antioxidant substances). This effect was also enhanced after applying electric pulses. L@F loaded with Quercetin was also explored only on the highly metastatic cancer cell line as a model for the breast cancer type most aggressive and non-responsive to traditional treatments. All obtained data suggest that the tested formulations have potential as carriers for the electro-assisted delivery of natural antioxidants such as Quercetin. Full article

Accelerated industrialization and surging energy demands have led to continuously rising atmospheric CO₂ concentrations. Developing sustainable methods to reduce atmospheric CO₂ levels is crucial for achieving carbon neutrality. Concurrently, the rapid development of new energy vehicles has driven a significant increase in demand for lithium-ion batteries (LIBs), which are now approaching an end-of-life peak. Efficient recycling of valuable metals from spent LIBs represents a critical challenge. This study employs conventional hydrometallurgical processing to recover valuable metals from spent LIBs. Subsequently, Ni-doped Co₃O₄ (Ni:Co₃O₄) supported on the natural mineral attapulgite (ATP) was synthesized via a sol–gel method. The incorporation of a small amount of Ni into the Co₃O₄ lattice generates oxygen vacancies, inducing a localized surface plasmon resonance (LSPR) effect, which significantly enhances charge carrier transport and separation efficiency. During the photocatalytic reduction of CO₂, the primary product CO generated by the Ni:Co₃O₄/ATP composite achieved a high production rate of 30.1 μmol·g⁻¹·h⁻¹. Furthermore, the composite maintains robust catalytic activity even after five consecutive reaction cycles. Full article

The vast majority of photocatalysts find it difficult to consistently and stably exhibit high performance due to the variability of sunlight intensity within a day, as well as the high energy consumption of artificial light sources. In this study, mechanoluminescent Sr₂MgSi₂O₇:Eu,Dy phosphors is combined with NiS@g-C₃N₄ composite to construct a ternary heterogeneous photocatalytic system, denoted as NCS. In addition to the enhanced separation efficiency of photogenerated charge carriers by the formation of a heterojunction, the introduction of Sr₂MgSi₂O₇:Eu,Dy provides an ultra-driving force for the photocatalytic reactions owing to its mechanoluminescence-induced excitation. Results show that the degradation rate of RhB increased significantly in comparison with pristine g-C₃N₄ and NiS@g-C₃N₄, indicating the obvious advantages of the ternary system for charge separation and migration. Moreover, the additional photocatalytic activity of NCS under ultrasound stimulation makes it a promising all-weather photocatalyst even in dark environments. This novel strategy opens up new horizons for the synergistic combination of light-driven and ultrasound-driven heterogeneous photocatalytic systems, and it also has important reference significance for the design and application of high-performance photocatalysts. Full article

Titanium dioxide (TiO₂), a widely used semiconductor in photocatalysis owing to its adequate potential for water hydrolysis, chemical stability, low toxicity, and low cost. However, its efficiency is limited by fast charge-carrier recombination and poor visible light absorption. Coupling TiO₂ with a p-type semiconductor, such as nickel oxide (NiO), forming a p-n heterojunction, decreases the recombination of charge carriers and increases photocatalytic activity. In this work, the surface of TiO₂ modified with NiO nanoparticles (NPs) induced by radiolysis for photocatalytic hydrogen production was studied. The photocatalytic activity of NiO/TiO₂ was evaluated using methanol as a hole scavenger under UV–visible light. All modified samples presented superior photocatalytic activity compared to bare TiO₂. The dynamics of the charge carriers, a key electronic phenomenon in photocatalysis, was investigated by time-resolved microwave conductivity (TRMC). The results highlight the crucial role of Ni-based NPs modification in enhancing the separation of the charge carrier and activity under UV–visible irradiation. Furthermore, the results revealed that under visible irradiation, NiO-NPs inject electrons into the conduction band of titanium dioxide. Full article

The rapid recombination of photoinduced charge carriers in semiconductors remains a significant challenge for their practical application in photocatalysis. This study presents the design of a step-scheme (S-scheme) heterojunction composed of carbon nitride (g-C₃N₄) and nickel-based metal–organic framework (Ni-MOF) to achieve enhanced charge separation. The establishment of an S-scheme charge transfer configuration at the interface of the Ni-MOF/g-C₃N₄ heterostructure plays a pivotal role in enabling efficient charge carrier separation, and hence, high CO₂ photoreduction efficiency with a CO evolution rate of 1014.6 µmol g⁻¹ h⁻¹ and selectivity of 95% under simulated solar illumination. CO evolution represents an approximately 3.7-fold enhancement compared to pristine Ni-MOF. Density functional theory (DFT) calculations, supported by in situ irradiated X-ray photoelectron spectroscopy (XPS) and electron paramagnetic resonance (EPR) experimental results, confirmed the establishment of a well-defined and strongly bonded interface, which improves the charge transfer and separation following the S-scheme mechanism. This study sheds light on MOF-based S-scheme heterojunctions as fruitful and selective alternatives for practical CO₂ photoreduction. Full article

A strong interaction between Bi³⁺ and ZnO was used to successfully sensitize ZnO nanorods with quantum dots (QDs) of Bi₂O₃ through three different strategies. Although the Bi₂O₃ QDs had similar particle size distributions, their photocatalytic performance varied significantly, prompting the investigation of factors beyond particle size. The study revealed that the photochemical method selectively deposited Bi₂O₃ QDs onto electron-rich ZnO sites, providing a favorable pathway for efficient electron–hole separation and transfer. Consequently, abundant h⁺ and ·OH radicals were generated, which effectively degraded Rhodamine B (RhB). As demonstrated in the RhB degradation experiments, the Bi₂O₃/ZnO nanorod catalyst achieved an 89.3% degradation rate within 120 min, significantly outperforming catalysts with other morphologies. The photoluminescence (PL) and time-resolved photoluminescence (TRPL) results indicated that the Bi₂O₃/ZnO heterostructure constructed an effective interface to facilitate the spatial separation of photogenerated charge carriers, which effectively prolonged their lifetime. The electron paramagnetic resonance (EPR) results confirmed that the ·OH radicals played a key role in the degradation process. Full article

This study presents the development of a novel Cu–Co–O-codoped graphitic carbon nitride (g-C₃N₄) catalyst for efficient peroxymonosulfate (PMS) activation to degrade sulfamethoxazole (SMX) in aqueous environments. The synthesized Cu–Co–O-g-C₃N₄ catalyst demonstrated exceptional catalytic performance, achieving 90% SMX removal within 10 min—significantly outperforming pristine g-C₃N₄ (14%) and O-doped g-C₃N₄ (22%)—with a reaction rate constant of 0.63 min⁻¹. The superior activity was attributed to the synergistic effects of Cu-Co bimetallic doping and oxygen incorporation, which enhanced the active sites, stabilized metal ions, and minimized leaching. Mechanistic studies revealed a dual-pathway degradation process: (1) a radical pathway dominated by sulfate radicals (SO₄•⁻) and (2) a non-radical pathway driven by singlet oxygen (¹O₂), with the latter identified as the dominant species through quenching experiments. The catalyst exhibited broad pH adaptability and optimal performance at neutral to alkaline conditions. Characterization techniques (XRD, FTIR, XPS) confirmed successful doping and revealed that oxygen incorporation modified the electronic structure of g-C₃N₄, improving charge carrier separation. This work provides a sustainable strategy for antibiotic removal, addressing key challenges in advanced oxidation processes (AOPs), and highlights the potential of multi-heteroatom-doped carbon nitride catalysts for water purification. Full article

Harnessing abundant and renewable solar energy for photocatalytic hydrogen production is a highly promising approach to sustainable energy generation. To realize the practical implementation of such systems, the development of photocatalysts that simultaneously exhibit high activity, cost-effectiveness, and long-term stability is critically important. In this study, a Cd_0.8Zn_0.2S nanowire photocatalytic system decorated with graphene (GR) was prepared by a simple hydrothermal method. The introduction of graphene increased the reaction active area of Cd_0.8Zn_0.2S, promoted the separation of photogenerated charge carriers in the semiconductor, and improved the photocatalytic performance of the Cd₀.₈Zn₀.₂S semiconductor. The results showed that Cd_0.8Zn_0.2S loaded with 5% graphene exhibited the best photocatalytic activity, with a hydrogen production rate of 1063.4 µmol·g⁻¹·h⁻¹. Characterization data revealed that the graphene cocatalyst significantly enhances electron transfer kinetics in Cd₀.₈Zn₀.₂S, thereby improving the separation efficiency of photogenerated charge carriers. This study demonstrates a rational strategy for designing high-performance, low-cost composite photocatalysts using earth-abundant cocatalysts, advancing sustainable hydrogen production. Full article

Constructing a heterojunction is considered one of the most effective strategies for enhancing photocatalytic activity. Herein, we employ Ta₃N₅ and tubular graphitic carbon nitride (TCN) to construct a Ta₃N₅/TCN van der Waals heterojunction via electrostatic self-assembly for enhanced photocatalytic H₂ production. SEM and TEM results show that Ta₃N₅ particles (~300 nm in size) are successfully anchored onto the surface of TCN. The light absorption capability of the Ta₃N₅/TCN heterojunction is between those of Ta₃N₅ and TCN. The strong interaction between Ta₃N₅ and TCN with different energy structures (Fermi levels) by van der Waals force renders the formation of an interfacial electric field to drive the separation and transfer of photogenerated charge carriers in the Ta₃N₅/TCN heterojunction, as evidenced by the photoluminescence (PL) and photoelectrochemical (PEC) characterization results. Consequently, the optimal Ta₃N₅/TCN heterojunction exhibits a remarkable H₂ production rate of 12.73 mmol g⁻¹ h⁻¹ under visible light irradiation, which is 3.3 and 16.8 times those of TCN and Ta₃N₅, respectively. Meanwhile, the cyclic experiment demonstrates excellent stability of the Ta₃N₅/TCN heterojunction upon photocatalytic reaction. Notably, the photocatalytic performance of 15-TaN/TCN outperforms the most previously reported CN-based and Ta₃N₅-based heterojunctions for H₂ production. This work provides a new avenue for the rational design of CN-based van der Waals heterojunction photocatalysts with enhanced photocatalytic activity. Full article

Lead halide perovskite quantum dots, also known as perovskite nanocrystals, are considered one of the most promising photovoltaic materials for solar cells due to their outstanding optoelectronic properties and simple preparation techniques. The key factors restricting the photoelectric conversion efficiency of solar cell systems are the separation and transmission performances of charge carriers. Here, femtosecond time-resolved ultrafast spectroscopy was used to measure the interfacial charge transfer dynamics of different sizes of CsPbBr₃ assembled with TiO₂. The effect of perovskite size on the charge transfer is discussed. According to our experimental data analysis, the time constants of the interfacial electron transfer and charge recombination of the assembled systems of CsPbBr₃ and titanium dioxide become larger when the size of the CsPbBr₃ nanocrystals increases. We discuss the physical mechanism by which the size of perovskites affects the rate of charge transfer in detail. We expect that our experimental results provide experimental support for the application of novel quantum dots for solar cell materials. Full article

Developing high-performance photocatalysts for solar hydrogen production requires the synergistic modulation of chemical composition, nanostructure, and charge carrier transport pathways. Herein, we report a Cs and P co-doped tubular graphitic carbon nitride (Cs/PTCN-x) photocatalyst synthesized via a strategy that integrates elemental doping with morphological engineering. Structural characterizations reveal that phosphorus atoms substitute lattice carbon to form P-N bonds, while Cs⁺ ions intercalate between g-C₃N₄ layers, collectively modulating surface electronic states and enhancing charge transport. Under visible-light irradiation (λ ≥ 400 nm), the optimized Cs/PTCN-3 catalyst achieves an impressive hydrogen evolution rate of 8.085 mmol·g⁻¹·h⁻¹—over 33 times higher than that of pristine g-C₃N₄. This remarkable performance is attributed to the multidimensional synergy between band structure tailoring and hierarchical porous tubular architecture, which together enhance light absorption, charge separation, and surface reaction kinetics. This work offers a versatile approach for the rational design of g-C₃N₄-based photocatalysts toward efficient solar-to-hydrogen energy conversion. Full article

Highly efficient photocatalysts for solar energy conversion require effective charge carrier separation and rapid interfacial transport kinetics to maximize electron availability. Two-dimensional Ti₃CNT_x, a novel conductive material in the MXene family with exceptional electrical conductivity, has emerged as an ideal electron transfer mediator due to its large specific surface area and abundant active terminal groups. In this work, we strategically integrated the 2D multi-metal sulfide Cu-Zn-In-S (CZIS) with 2D Ti₃CNT_x nanosheets through physical mixture, constructing a heterostructured 2D/2D CZIS/Ti₃CNT_x composite photocatalyst for the hydrogen evolution reaction. The unique architecture significantly accelerates electron migration from CZIS to Ti₃CNT_x, while synergistically promoting the spatial separation and directional transfer of photogenerated electron–hole pairs (e⁻/h⁺). When the hydrogen evolution reaction is carried out under identical conditions, the hydrogen yield rate is 4.3 mmol g⁻¹ h⁻¹ with pristine CZIS but is improved dramatically to 14.3 mmol g⁻¹ h⁻¹ when the composite containing an adequate amount of 2D Ti₃CNT_x is used. This study offers new insight into the rational design and controllable synthesis of Ti₃CNT_x-based composite photocatalytic systems for efficient photocatalytic hydrogen production. Full article

Fabricating efficient photocatalysts that can be used in solar-to-fuel conversion and to enhance the photochemical reaction rate is essential to the current energy crisis and climate changes due to the excessive usage of nonrenewable fossil fuels. To attain high photo-to-chemical conversion efficiency, it is important to fabricate cost-effective and durable catalysts with high activity. One-dimensional cadmium sulfides (1D CdS), with higher surface area, charge carrier separation along the linear direction, and visible light harvesting properties, are promising candidates for converting solar energy to H₂, reducing CO₂ to commodity chemicals, and remediating environmental pollutants. The main disadvantage of CdS is photocorrosion due to the leaching of S²⁻ ions during the photochemical reactions, and further charge recombination rate leads to low quantum efficiency. Therefore, the implementation of core–shell heterostructured morphology, i.e., the growth of the shell on the surface of the 1D CdS, which offers unique features such as protection of CdS from photocorrosion, a tunable interface between the core CdS and shell, and photogenerated charge carrier separation via heterojunctions, provides additional active sites and enhanced visible light harvesting. Therefore, the viability of the core–shell synthesis strategy and synergetic effects offer a new way of designing photocatalysts with enhanced stability and improved charge separation in solar energy conversion systems. This review highlights some critical aspects of synthesizing 1D CdS core–shell heterostructures, underlying reaction mechanisms, and their performance in photoredox reactions. Finally, some challenges and considerations in the fabrication of 1D CdS-based core–shell nanostructures that can overcome the current barriers in industrial applications are discussed. Full article

The synthesis of graphitic carbon nitride (g-C₃N₄) coupled with tin sulfide (SnS) has been identified as an effective method for improving the photocatalytic and electrochemical performance of SnS, a promising material for environmental and energy-related applications. In this study, we focused on how g-C₃N₄ influences the structural, optical, electrochemical, and functional properties of SnS. XRD and FTIR confirmed the formation of SnS/g-C₃N₄ heterostructure, while surface morphology analysis by SEM showed proper dispersion of SnS particles over g-C₃N₄ with a good interface contact. The SnS/g-C₃N₄ composite itself demonstrated improved photocatalytic performance, with the degradation rate of methylene blue reaching approximately 94% under visible light irradiation compared to the moderate activity of SnS. This enhancement can be credited to the successful charge carrier separation enabled by the type II heterojunction created between SnS and g-C₃N₄. Moreover, the composite presented improved electrochemical activity with a specific capacitance of 1340 F·g⁻¹ at a scan rate of 10 A·g⁻¹ and good cycling stability, where the capacitance was 92% after 5000 cycles. As such, these SnS/g-C₃N₄ composites suggest the specific application of this class of material in photocatalytic degradation as well as energy storage, putting forward new effective resolutions to environmental and energy issues. Full article