Search Results (120)

The use of chloride-based deicing salts, particularly sodium chloride (NaCl) and calcium chloride (CaCl₂), is a common practice in cold regions for maintaining road safety during winter. However, the accumulation of salt residues in adjacent soils poses serious environmental threats, including reduced pH, increased electrical conductivity (EC), disrupted soil structure, and plant growth inhibition. This study aimed to evaluate the combined effect of activated carbon (AC) and Pennisetum alopecuroides, a salt-tolerant perennial grass, in alleviating salinity stress under deicer-treated soils. A factorial greenhouse experiment was conducted using three fixed factors: (i) presence or absence of Pennisetum alopecuroides, (ii) deicer type (NaCl or CaCl₂), and (iii) activated carbon mixing ratio (0, 1, 2, 5, and 10%). Soil pH, EC, and ion concentrations (Na⁺, Cl⁻, Ca²⁺) were measured, along with six plant growth indicators. The results showed that increasing AC concentrations significantly increased pH and reduced EC and ion accumulation, with the 5% AC treatment being optimal in both deicer systems. Plant physiological responses were improved in AC-amended soils, especially under CaCl₂ treatment, indicating less ion toxicity and better root zone conditions. The interaction effects between AC, deicer type, and plant presence were statistically significant (p < 0.05), supporting a synergistic remediation mechanism involving both adsorption and biological uptake. Despite the limitations of short-term controlled conditions, this study offers a promising phytomanagement strategy using natural adsorbents and salt-tolerant plants for sustainable remediation of salt-affected soils in road-adjacent and urban environments. Full article

Donkey milk is well known for its beneficial properties for human health, making it a valuable ingredient in the production of value-added cheese. Rolled cheese, a type of pasta filata cheese, is traditionally produced in the northern part of Serbia. In this study, we produced rolled cheese by adding a certain amount of donkey’s milk from the Balkan and Banat breeds to cow’s milk. The rolled cheese samples were analyzed for their microbiological quality, chemical composition, content of essential and trace elements, as well as sensory characteristics. Adding 10% and 20% donkey’s milk had no effect on the microbiological quality or hedonic scale of rolled cheeses compared with rolled cheese made from raw cow’s milk. However, the addition of donkey’s milk partially affected the chemical composition and mineral profile of the cheeses. The fat, fat in dry matter, calcium contents, and the ratio of calcium and phosphorus significantly (p < 0.05) decreased with the addition of donkey’s milk, while the ash, salt, sodium, and potassium contents significantly (p < 0.05) increased. The assessors successfully distinguished the rolled cheeses containing donkey’s milk from those made with cow’s milk, encouraging the future production of value-added cheese. Full article

Unconventional heavy oil reservoirs are particularly susceptible to steam breakthrough, which significantly reduces crude oil production. Profile control is a crucial strategy used for stabilizing oil production and minimizing production costs in these reservoirs. Conventional plugging agent systems used in the thermal recovery of heavy oil currently fail to meet the high-temperature, high-strength, and deep profile control requirements of this process. Precipitation-type calcium salt blocking agents demonstrate long-term stability at 300 °C and concentrations up to 250,000 mg/L, making them highly effective for profile control and channeling blockage during the steam injection stages of heavy oil recovery. This study proposes two types of precipitation-type calcium salt blocking agents: CaSO₄ and CaCO₃ crystals. The precipitation behavior of these agents was investigated, and their dynamic growth patterns were examined. The calcium sulfate blocking agent exhibits a slower crystal precipitation rate, allowing for a single-solution injection, while the calcium carbonate blocking agent precipitates rapidly, requiring a dual-solution injection. Both systems incorporate scale inhibitors to delay the growth of calcium salt crystals, which aids in deep profile control. Through microscopic visualization experiments, the micro-blocking characteristics of the calcium salt blocking agent systems within pores were compared, elucidating the blocking positions of the precipitated calcium salts under porous conditions. Calcium sulfate crystals preferentially precipitate in and block larger pore channels, whereas calcium carbonate crystals are more evenly distributed throughout the pore channels, reducing the reservoir’s heterogeneity. The final single-core displacement experiment demonstrated the sealing properties of the precipitation-type calcium salt blocking agent systems. The developed precipitation-type calcium salt blocking agent systems exhibit excellent profile control performance. Full article

Applications of lanthanide chemistry have been successful in metallics and the petroleum industry. In the medical realm, lanthanides have shown utility in radiotherapy agents, photodynamic therapy agents, and magnetic resonance imaging (MRI) contrast agents. The lanthanide group elements have a few known biological roles, notably among some bacteria and the yeast Saccharomyces cerevisiae, which have been used as models for changes in gene expression. However, the systematic effects of lanthanide nitrates on eukaryotic cell model systems have not yet been reported. This study presents the first documented effects on cell viability, after acute incubations of various lanthanide nitrate salts, using axenic C6 glial or PC12 neuronal cells in vitro. Cultures were exposed to a 1 mM concentration of lanthanide nitrate salts for 24 h. In comparison to the saline control, several cultures demonstrated significantly lower cell viability, as measured by the MTT viability assay. Data were analyzed as an average absorbance of n = 4 replicate samples, corrected for the average absorbance of cell-free blanks. The reported results were normalized to the average of the saline control cells. Among the 13 lanthanides tested, Praseodymium, Holmium, Erbium, Thulium, and Ytterbium nitrates exhibited the most pronounced inhibitory effects, resulting in over 40% reduction in cell viability at 1 mM for either or both cell types. Recovery after lanthanide exposure also was cell-type-dependent as well as lanthanide-type-dependent, with Lutetium having the greatest effect on both cell types. PC12 cells displayed greater sensitivity for inhibition than the C6 cells with some of the lanthanides but not all. Furthermore, the controls of sodium nitrate and calcium nitrate showed only modest discernible impacts on cell viability for PC12 and C6 cells, highlighting the role of the lanthanides in influencing cell viability. Full article

Salt lakes and the surrounding saline soils distributed across northwestern China and Inner Mongolia impose severe physicochemical corrosion on cement-based concrete. Understanding the corrosion products and mechanisms are crucial scientific and technological factors in ensuring the durability and service life of concrete structures in these regions. In this study, various analytical techniques—including X-ray diffraction, thermogravimetric–differential thermal analysis, X-ray fluorescence, and scanning electron microscopy coupled with energy-dispersive spectroscopy—were employed to systematically analyze the corrosion products of ordinary Portland cement (OPC) and high-performance concrete (HPC) specimens after eight years of field exposure in the Qarhan Salt Lake area of Qinghai. The study provided an in-depth understanding of the physicochemical corrosion mechanisms involved. The results showed that, after eight years of exposure, the corrosion products comprised both physical corrosion products (primarily sodium chloride crystals), and chemical corrosion products (associated with chloride, sulfate, and magnesium salt attacks). A strong correlation could be observed between the chemical corrosion products and the strength grade of the concrete. In C25 OPC, the detected corrosion products included gypsum, monosulfate-type calcium sulfoaluminate (AFm), Friedel’s salt, chloro-ettringite, brucite, magnesium oxychloride hydrate 318, calcium carbonate, potassium chloride, and sodium chloride. In C60 HPC, the identified corrosion products included Kuzel’s salt, Friedel’s salt, chloro-ettringite, brucite, calcium carbonate, potassium chloride, and sodium chloride. Among them, sulfate-induced corrosion led to the formation of gypsum and AFm, whereas chloride-induced corrosion resulted in chloro-ettringite and Friedel’s salt. Magnesium salt corrosion contributed to the formation of brucite and magnesium oxychloride hydrate 318, with Kuzel’s salt emerging as a co-corrosion product of chloride and sulfate attacks. Furthermore, a conversion phenomenon was evident between the sulfate and chloride corrosion products, which was closely linked to the internal chloride ion concentration in the concrete. As the chloride ion concentration increased, the transformation sequence of sulfate corrosion products occurred in the following order: AFm → Kuzel’s salt → Friedel’s salt → chloro-ettringite. There was a gradual increase in chloride ion content within these corrosion products. This investigation into concrete durability in salt-lake ecosystems offers technological guidance for infrastructure development and material specification in hyper-saline environments. Full article

Transportation infrastructure such as concrete pavements, parapets, barriers, and bridge decks in cold regions are usually exposed to a heavy amount of deicing chemicals during the winter for ice and snow control. Various deicer salts can physically and chemically react with concrete and result in damage and deterioration. Currently, Idaho uses four different types of deicers during the winter: salt brine, mag bud converse, freeze guard plus, and mag chloride. The most often utilized substance is salt brine, which is created by dissolving rock salt at a concentration of 23.3%. Eight concrete mixtures for paving and structural purposes were made and put through a battery of durability tests. Following batching, measurements were made of the unit weight, entrained air, slump, and super air meter (SAM) fresh characteristics. Rapid freeze–thaw (F-T) cycle experiments, deicing scaling tests, and surface electrical resistivity testing were used to test and assess all mixes. Tests with mag bud converse, freeze guard plus mag chloride, and acid-soluble chloride were conducted following an extended period of soaking in salt brine. Two different structural mixtures were suggested as a result of the severe scaling observed in the structural mixtures lacking supplemental cementitious materials (SCMs) and the moderate scaling observed in the other combinations. The correlated values of the SAM number with the spacing factor have been shown that mixture with no SCMs has a spacing factor of 0.24, which is higher than the recommended value of 0.2 and concentrations of acid soluble chloride over the threshold limit were discernible. In addition, the highest weight of calcium hydroxide using the TGA test was observed. For all examined mixes, the residual elastic moduli after 300 cycles varied between 76.0 and 83.3 percent of the initial moduli. Mixture M5 displayed the lowest percentage of initial E (76.0 percent), while mixtures M1 and M2 showed the highest percentage of residual E (83.3 and 80.0 percent, respectively) among the evaluated combinations. There were no significant variations in the percentage of maintained stiffness between the combinations. As a result, it was difficult to identify distinct patterns about how the air content or SAM number affected the mixture’s durability. Class C coal fly ash and silica fume were present in the suggested mixtures, which were assessed using the same testing matrix as the original mixtures. Because of their exceptional durability against large concentrations of chemical deicers, the main findings suggest altering the concrete compositions to incorporate SCMs in a ternary form. Full article

Long non-coding RNAs (lncRNAs) are involved in plant biotic and abiotic stress responses, in which Ca²⁺ also plays a significant role. There is diversity in the regulation of different gene expressions by cytosolic Ca²⁺ ([Ca²⁺]_cyt) and nucleosolic Ca²⁺ ([Ca²⁺]_nuc). However, no studies have yet explored the interrelationship between lncRNAs and calcium signaling, nor how calcium signaling regulates the expression of lncRNAs. Here, we use transgenic materials PV-NES and NLS-PV, which simulate [Ca²⁺]_cyt- and [Ca²⁺]_nuc-deficient mutants, respectively, and wild type (WT) materials in response to hyperosmolarity (250 mM sorbitol) or salt stresses (125 mM NaCl) at different time points to obtain RNA-seq data, respectively. Then, we proceed with the screening of lncRNAs, adding 688 new lncRNAs to the known Arabidopsis lncRNA database. Subsequently, through the analysis of differentially expressed lncRNA genes, it was found that cytosolic or nucleosolic calcium signals have distinct regulatory effects on differentially expressed lncRNAs (DElncRNAs) and differentially expressed protein-coding genes (DEPCGs) treated with high-concentration NaCl and sorbitol at different times. Furthermore, through weighted correlation network analysis (WGCNA), it is discovered that under hyperosmolarity and salt stresses, lncRNA-associated PCGs are related to the cell wall structure, the plasma membrane component, and osmotic substances through trans-regulation. In addition, by screening for cis-regulatory target PCGs of Ca²⁺-regulated lncRNAs related to osmotic stress, we obtain a series of lncRNA-PCG pairs related to water transport, cell wall components, and lateral root formation. Therefore, we expand the existing Arabidopsis lncRNA database and obtain a series of lncRNAs and PCGs regulated by [Ca²⁺]_cyt or [Ca²⁺]_nuc in response to salt and hyperosmolarity stress, providing a new perspective for subsequent research on lncRNAs. We also explore the trans- and cis-regulated target PCGs of lncRNAs regulated by calcium signaling, providing new insights for further studying salt stress and osmotic stress. Full article

Plant-based substitutes for dairy products represent a rapidly developing market worldwide as they become increasingly popular with consumers. This study aimed to determine the nutritional and sensory quality of ten plant-based cheese substitutes labelled ‘classic’/‘original’ purchased on the Slovenian market. The quality was checked using chemical and sensory analysis. When the results of chemical analysis were compared with the nutritional composition of a semi-hard type of cheese, the plant-based cheese substitutes differed greatly. On average, they contained 60 times less protein, 8 times less calcium and 50% more salt per 100 g of product. Considering median values, plant-based substitutes had 200 times less protein, 40 times less calcium, and 58% more salt compared to cheeses. The fatty acid composition was less favourable when compared to a regular semi-hard type of cheese: 50% more saturated fatty acids, almost five times less monounsaturated fatty acids, and only one third of the polyunsaturated fatty acids per 100 g of product, respectively, but no trans fatty acids. Despite some sensory deficiencies (absence of eyes; crumbly, granular, and tough texture; discordant, fatty, and salty taste; foreign odour and pale colour), the sensory quality in this product category was acceptable overall. More research should be conducted in this area to minimise the knowledge gaps in the nutritional composition and sensory quality of plant-based cheese substitutes. Full article

The gelation process and hydrogel properties of calcium salt-induced alginate hydrogels are influenced by anion-specific effects. In this study, we investigated the effects of CaSO₄, CaI₂, and Ca(C₅H₉O₃)₂ [calcium β-hydroxy-β-methylbutyrate, CaHMB] on the gelation behavior of alginate hydrogels, using various mannuronic/guluronic acid (M/G) ratios to elucidate the underlying mechanisms of anion-specific effects. Here, at a high M/G ratio (2:1), the gelation time of CaSO₄, as a low-solubility calcium source, delayed the formation of the calcium alginate hydrogel. The gelation time was 1.8 times that of the high-solubility calcium source CaHMB. Strongly hydrated ions (such as SO₄²⁻ and C₅H₉O₃⁻) caused the removal of water molecules from polysaccharide chains, resulting in the formation of small pores on the pore wall. Moreover, weakly hydrated chaotropic anions (I⁻) promoted the binding of alginate polysaccharide chains and water molecules, resulting in the slower thermal decomposition of water inside the gel. However, when the M/G ratio was reduced to 1:1 or 1:2, the influence of the three calcium salts on the water and thermodynamic properties of the hydrogels decreased, indicating that the anion-specific effect weakened. This study highlights the importance of anion-specific effects on the properties of alginate hydrogels and provides insights into the utilization of these effects to fabricate functional hydrogels with variable properties. Full article

Calcium-dependent protein kinases (CPKs) are plant proteins that directly bind calcium ions before phosphorylating substrates involved in biotic and abiotic stress responses, as well as development. Arabidopsis thaliana CPK3 (AtCPK3) is involved with plant signaling pathways such as stomatal movement regulation, salt stress response, apoptosis, seed germination and pathogen defense. In this study, AtCPK3 and its orthologues in relatively distant plant species such as rice (Oryza sativa, monocot) and kiwifruit (Actinidia chinensis, asterid eudicot) were analyzed in response to drought, bacteria, fungi, and virus infections. Two orthologues were studied in O. sativa, namely OsCPK1 and OsCPK15, while one orthologue—AcCPK16—was identified in A. chinensis. Reverse-transcriptase quantitative PCR (RT-qPCR) analysis revealed that OsCPK1 and AcCPK16 exhibit similar responses to stressors to AtCPK3. OsCPK15 responded differently, particularly in bacterial and fungal infections. An increase in expression was consistently observed among AtCPK3 and its orthologues in response to virus infection. Overexpression mutants in both Arabidopsis and kiwifruit showed slight tolerance to drought, while knockout mutants were slightly more susceptible or had little difference with wild-type plants. Overexpression mutants in Arabidopsis showed slight tolerance to virus infection. These findings highlight the importance of AtCPK3 and its orthologues in drought and pathogen responses and suggest such function must be conserved in its orthologues in a wide range of plants. Full article

Properties of high early-strength concretes (HESCs) containing Type V, Type III, and rapid hardening calcium sulfoaluminate (CSA) cements were investigated at curing ages of opening time, 24 h, and 28 days. Investigated properties included the fresh (workability, setting time, air content, unit weight, and released heat of hydration), mechanical (compressive and flexural strengths), transport (absorption, volume of permeable voids, water penetration, rapid chloride permeability, and accelerated corrosion resistance), dimensional stability (drying shrinkage), and durability (de-icing salt and abrasion resistance) properties. Test results revealed that the HESC containing Rapid-Set cement achieved the shortest opening time to attain the required minimum strength, followed by Type III and Type V cement HESCs. For the most part, Type V cement HESC produced the best transport and de-icing salt resistance, whereas Rapid-Set cement HESC displayed the best dimensional stability and wear resistance. Full article

In Morocco, saline irrigation significantly affects soil quality and reduces crop yields. This study evaluates the effect of salt stress on soil properties and the overall performance of the durum wheat variety “Faraj”, aiming to optimize production under saline conditions. A greenhouse experiment was conducted during the 2023–2024 season, using a completely randomized design (CRD) to assess soil properties, plant growth, and yield. Five salinity levels (0.2, 4, 8, 12, and 16 dS m⁻¹) were applied to two soil types: silty-clay (S1) and sandy (S2). Results showed significant changes in soil properties, including increased pH, electrical conductivity, and accumulation of potassium, calcium, and magnesium in soil. Grain yield decreased significantly with increasing salinity, from 1.12 t ha⁻¹ in freshwater to 0.12 t ha⁻¹ at 16 dS m⁻¹ in S1, and from 0.56 t ha⁻¹ in freshwater to 0.12 t ha⁻¹ at 16 dS m⁻¹ in S2. Straw yield was less affected, with values of 1.24 and 1.16 t ha⁻¹ for S1 and S2 at 12 dS m⁻¹, decreasing to 0.80 and 0.55 t ha⁻¹ at 16 dS m⁻¹. The “Faraj” variety shows good tolerance to salinity up to 8 dS m⁻¹ for grain yield and 12 dS m⁻¹ for straw yield, making it particularly suitable for moderately saline environments. Full article

This research is focused on the laboratory study of salt crystallization inhibitor products as new materials for conservation treatments which can be applied to mortars and painted plasters; as is well known, salt crystallization is one of the most frequent causes of decay processes on decorated architectural surfaces in a wide range of environments. Specifically, the study targets the field of the preventive conservation of mural paintings within rupestrian heritage sites. For the first time, systematic investigations were performed on mock-ups made of plaster painted with two different pigments: yellow ochre and carbon black. Two types of phosphonate inhibitors, PBTC (2-phosphonobutane-1,2,4-tricarboxylic acid) and ATMP (aminotris (methylene phosphonic acid)), were chosen and applied at two different concentrations. Given the limited literature available, and the presence of pigments potentially sensitive to treatment with salt inhibitors, preliminary tests were required. Their effects on the chromatic features of the pigments were evaluated visually and using colorimetry. The changes in the behaviour of water circulation in the mortar resulting from the treatments were evaluated through water vapour permeability and absorption tests. Accelerated crystallization experiments were carried out to assess how inhibitors could influence the growth of salts and the resulting material damage. The latter was carried out by employing sodium sulphate and calcium sulphate solutions, quantifying the damage to the specimens through material loss in weight and the percentage of painted surface loss. Based on the overall results, the product with the best performance was identified was ATMP 0.1% (by volume) in deionized water. The obtained results show that salt inhibitor treatments are promising for in situ application and could represent an innovative approach to promote the sustainable conservation of mural painting, particularly those located in hypogeal contexts, where the salt supply cannot be removed and slowing the growth of salts and/or changing their crystalline habitus may be effective in limiting their damage. Full article

As a passive solar design technology, the Trombe wall can improve buildings’ energy efficiency and thermal comfort. However, the traditional Trombe wall heating efficiency is low and cannot meet the needs of continuous night heating of the building. To solve these problems, a new type of sheet-like composite adsorbent is proposed in this study, prepared from calcium chloride supported by a rock wool board, a high-porosity building material. The high adaptability of rock wool board to the building wall makes it possible for the composite adsorbent to be directly applied to the Trombe wall. The results show that the macroporous structure of the rock wool board provides a wealth of space for loading hydrated salts. The smaller the density and thickness, the more calcium chloride the rock wool board can carry, speeding up the absorption/deportation process. The rock wool slab-based calcium chloride composite adsorbent has a maximum adsorption capacity of 51% and a heat storage density of about 838 J/g. Achieving the desorbed balance within 8 h and applying it to the Trombe wall is expected to attain continuous heating of buildings and has significant potential in building energy conservation. Full article

Producing uniform Cannabis sativa (Cannabis) for medicinal/recreational flower production through sexual propagation has been problematic, leading to dominance of clonal propagation from “mother plants” in the cannabinoid industry, which also faces significant limitations. Cannabis tissue culture (TC) methods have been developed to overcome these challenges, but the long-term health and maintenance of Cannabis explants in TC have been largely overlooked in previous studies. The current study focused on the development of an efficient and optimized micropropagation protocol covering the entire process, with a specific focus on the health and performance in the multiplication stage. Multiplication media were formulated hormone-free to avoid longer-term vitrification issues, resulting in single-main-shoot cultures rather than multiple-shoot cultures. This instigated the use of stage II explant types different from the standard shoot tips previously used for multiple shoot cultures. Multiplication media were further improved from the basal salt composition via nitrogen and calcium additives. The optimized protocol was used on eight diverse Cannabis cultivars to test its applicability across various genetic backgrounds. Results indicated that the protocol was effective for conservation purposes across all cultivars and achieved good long-term multiplication rates for some but not all. The outcomes of this study mark a significant stride towards an efficient Cannabis TC methodology ready for more comprehensive industrial applications. Full article