Search Results (340)

This work presents an evaluation of the effectiveness of active ventilation methods compared to passive ventilation methods in a typical B + GF + 9 building, focusing on the impact of burner height location on smoke control performance. The numerical model was validated using a full-scale room fire experiment involving a 4350 kJ/s wood crib load, where the HRR was calibrated via the mass loss method, achieving an RMSE of 210 kW and MRE of 5.04%. FDS simulations were conducted across six scenarios involving burners on the ground, fifth, and ninth floors. The findings demonstrate that, while natural ventilation allows the stairwell to reach lethal conditions with temperatures exceeding 180 °C and CO concentrations above 0.24%, the implementation of top-level mechanical pressurization maintains temperatures below the 60 °C tenability threshold. The mechanical ventilation system extended the Available Safe Egress Time (ASET) by 75% to 110%, with effectiveness increasing as the burner elevation approached the fan location. Overall, the study provides a validated approach for transforming stairwells into protected refuge zones in existing mid-rise buildings. Overall, merging empirical with computational methods is a proven basis for simulating scaled-up, complicated layouts. This guarantees accurate initial conditions when analyzing urban fire emergencies. Full article

The building sector is responsible for 40% of CO₂ emissions in Portugal, making the integration of renewable energy systems increasingly relevant. Photovoltaic (PV) technologies have become more accessible due to declining levelized costs of energy, and when coupled with battery energy storage systems (BESSs), they can enhance grid independence, reduce household energy expenses, and mitigate peak load stress. However, high upfront costs still limit adoption, particularly among vulnerable communities. This study evaluates the technical, economic, and environmental performance of PV systems, with and without BESSs, compared with an existing solar thermal configuration in a social-housing neighbourhood in Porto, Portugal. Numerical simulations were conducted for three scenarios, optimising system sizing and ensuring hourly energy flow balance between generation, storage, and grid supply. Results indicate that all configurations are technically feasible within Porto’s climate conditions, though with distinct investment needs, payback periods, and CO₂ reduction outcomes. The findings offer practical guidance for designing renewable energy solutions tailored to social housing, supporting both decarbonization goals and long-term mitigation of energy poverty. Full article

Conventional Heating, Ventilation, and Air Conditioning (HVAC) control systems primarily rely on environmental and physiological parameters, largely ignoring the critical influence of psychological states on thermal comfort. Overlooking this factor often leads to suboptimal occupant satisfaction, energy inefficiency and thus carbon dioxide (CO₂) emissions. To this aim, this study introduces a novel mood-adaptive HVAC control system integrating psychological feedback to decrease CO₂ emissions in office buildings by reducing energy consumption and optimizing comfort. A total of 7000 thermal facial measurement records and high-resolution camera images were collected across seven mood state conditions using video stimuli and the Profile of Mood States (POMS) questionnaire to evaluate mood variations. A dual artificial intelligence system was developed: a Convolutional Neural Network (CNN) for analyzing facial expressions and an Artificial Neural Network (ANN) for processing facial temperatures via thermal imaging. These models collectively predict occupant mood in real-time, and a custom-designed wearable necklace interface transmits this data to dynamically adjust HVAC setpoints. To evaluate system performance, energy consumption was directly measured in real-life operations using an energy analyzer, without relying on simulations. Results indicate that this prototype personalized mood-driven system has the potential to enhance perceived thermal comfort while achieving up to a 20% reduction in carbon emissions compared to conventional systems. This human-centered approach significantly advances intelligent building management and climate change mitigation. Full article

During the adaptive reuse of industrial heritage buildings, existing opening systems and envelope performance often pose major constraints. These restrictions make it difficult for the building to meet the requirements of the updated indoor environment, resulting in insufficient daylight and increased energy consumption. Therefore, optimizing lighting and energy performance has become the primary goal of the retrofit design. However, with limited interventions, the retrofit of heritage buildings to achieve significant overall performance improvement is still a challenge. From a sustainability perspective, improving daylight utilization and reducing energy demand are essential strategies for achieving low-carbon and resource-efficient building retrofit. This study proposes a grid-based parametric multi-objective optimization approach to optimize the window openings of the building envelope. The approach defines the position, size and material properties of the roof and facade openings as design variables. Implemented via the Honeybee and Octopus platforms, it integrates a genetic algorithm with EnergyPlus and Radiance simulations to co-optimize daylight performance, circadian frequency, and energy use intensity. Taking a single-story typical industrial heritage building in China’s cold climate zone as a case study, it is shown that coordinated multi-objective constraints significantly improve the overall performance across various evaluation metrics. The optimization results also provide interpretable window configuration strategies and recommended parameter ranges, which fully consider the climate adaptability of the surrounding environment. These findings offer useful guidance for sustainable retrofit design decision-making in similar single-story industrial heritage buildings. Full article

The decarbonization of the residential sector is a critical component of the European Green Deal, particularly in transition economies like Poland. This study proposes a comprehensive techno-economic optimization of a deeply retrofitted single-family house aiming for net-zero energy building (NZEB) status. The research specifically focuses on the Polish coastal climate zone, characterized by distinct humidity, wind, and temperature profiles compared to inland regions, which significantly influence the efficiency of air-to-water heat pumps (ASHP). Based on a real-world energy audit, the study simulates the synergy between a deep thermal envelope upgrade and a hybrid system comprising an ASHP, photovoltaics (PV), and battery energy storage (BES). This paper presents a detailed economic analysis of such hybrid systems under the new Polish ‘net-billing’ prosumer mechanism. The study evaluates the impact of electricity tariff structures (flat-rate G11 vs. time-of-use G12w) on the investment’s profitability. By calculating key performance indicators—including the levelized cost of energy (LCOE), net present value (NPV), and self-sufficiency ratio (SSR)—the research assesses various system configurations. The initial evaluation indicates that while deep retrofitting significantly reduces heating demand, integrating battery storage plays a critical role in enhancing economic returns under the net-billing framework. The analysis demonstrates that the optimized hybrid system (9.0 kWp PV + 10 kWh BESS) achieves an average annual self-sufficiency ratio (SSR) of 49.8% and reduces the non-renewable primary energy (EP) indicator to 0.0 kWh/(m²·year). Economically, the investment yields a positive NPV of €3194, an IRR of 5.25%, and a LCOE of €0.184/kWh, which is 34% lower than projected grid prices. Furthermore, switching to a time-of-use tariff (G12w) generates an additional 11% (€139) in annual savings. These quantitative findings provide actionable guidelines for policymakers and investors, confirming the financial viability and environmental benefit (annual reduction of 6.12 MgCO₂) of NZEB standards in coastal areas. Full article

This study investigates the soil thermal imbalance of ground-source heat pump (GSHP) systems in residential buildings in cold regions and evaluates their economic and low-carbon performance. A case study is presented of a two-star green-certified residential building in Qingdao. The building exhibits a high heating load in winter, a low cooling load in summer, a long heating season, and large load fluctuations. To tackle these characteristics, a composite energy system combining a ground-source heat pump, a peak-shaving chiller, and a peak-shaving boiler is proposed. Three scenarios are designed, in which the ground-source heat pump covers 45%, 50%, and 52.6% of the winter peak heating load, respectively. These are compared with a conventional municipal heating scheme. Load simulation, techno-economic analysis, and carbon emission assessment are performed. The results show that the scheme in which the ground-source heat pump handles 50% of the peak heating load achieves the best overall performance. It reduces the soil thermal imbalance rate from 34.47% to 7.1% and obtains the lowest 10-year life-cycle cost. The annual carbon emission reaches 32.58 kgCO₂/(m²·a), representing a 33% reduction compared with municipal heating. Seasonal and diurnal optimized operation strategies are further proposed based on the optimal solution. The results provide theoretical and engineering guidance for the design and operation of low-carbon energy systems in green residential buildings in cold regions. Full article

This study analyzes the feasibility of increasing the energy and economic efficiency of a residential heating and domestic hot water (DHW) preparation system with a solar-assisted air-to-water heat pump (AWHP), implemented in southeast Romania. The following options are evaluated from the sustainability point of view (energy, economic and CO₂ emissions): renovation of the building and modernization of the system by integrating an electric accumulator, increasing the capacity of photovoltaic panels (PV) and solar thermal collectors (STCs), and the option of replacing the AWHP with a ground-source heat pump (GSHP) with a vertical loop (GSHP-VL) and a GSHP with a horizontal loop (GSHP-HL). The energy performance of heating systems was simulated using GeoT*SOL software. The results show that by renovating a home, the energy requirement for heating decreased by about 58%; therefore, following the current financial rules applied to prosumers, the GSHP-VL system has the best energy performance (electricity consumption and solar coverage rate of this consumption), economic performance (investment recovery period and annual operating cost) and environmental performance (lowest CO₂ emissions) and that through a government program that promotes energy efficiency and the use of renewable energy sources in homes, capital costs can be reduced by (43–57)% in the case of systems with HP, PV and electric storage. This study shows that a 5 kW PV system combined with 5 kWh battery cannot cover the full heat demand of a medium-to-large house during the winter, and for full energy independence, a larger PV array paired with a higher-capacity battery is necessary. Generous government subsidies amounting to 50% can reduce the payback period for such investments from (11.26–14.68) years to (5.86–7.26) years. Full article

This study integrates in situ Quantitative Infrared Thermography (QIRT) and Building Energy Simulation (BES) to optimize the energy performance of an existing multi-story residential building in Istanbul, Türkiye. QIRT was utilized to diagnose thermal anomalies at the interfaces of uninsulated walls, the RC skeleton and fenestration junctions, revealing significant thermal bridging and air infiltration while enabling the calculation of the Temperature Index (TI) at critical interfaces. A key finding of the non-destructive diagnostic phase was the discrepancy between in situ (U_INSITU) and theoretical (U_CALC) thermal transmittance values, providing an empirical baseline for subsequent optimization. A multi-objective analysis, employing genetic algorithms (GAs), was conducted to evaluate 192 retrofit combinations, involving three insulation materials at four thicknesses and 16 glazing types. The impacts on primary energy consumption, CO₂ emissions, and 30-year global costs (per EN 15459-1:2017) were quantified under volatile economic conditions. Findings indicate that the energy-optimal solution reduces primary energy by 53% and CO₂ emissions by 51%, while the cost-optimal configuration reduces global costs by 52% relative to the reference case. The Pareto analysis reveals a robust convergence between financial and energy efficiency targets, proving that deep retrofitting is an economically imperative strategy for achieving national decarbonization goals and the 2053 net-zero vision. Full article

Construction and demolition waste (CDW) represents a critical environmental challenge in the building sector, with global generation exceeding 3.57 billion tonnes annually. The circular economy (CE) framework offers a transformative pathway through selective deconstruction and material recovery, yet implementation faces significant barriers including information asymmetry, supply chain fragmentation, and regulatory uncertainty. This study conducts a systematic literature review using the Context–Mechanism–Outcome (CMO) framework to analyze how computational methods, specifically Digital Twins (DT), Building Information Modeling (BIM), Internet of Things (IoT), blockchain, artificial intelligence, and robotics, act as enablers for resilience in CDW management. Following PRISMA 2020 guidelines and realist synthesis principles, we analyzed 42 high-quality empirical studies from Web of Science and Scopus (2015–2025). Our analysis identifies seven primary mechanisms: traceability (M1), simulation (M2), classification (M3), tracking (M4), collaboration (M5), analytics (M6) and robotics (M7). These mechanisms interact with four critical contexts (information asymmetry, supply chain fragmentation, economic uncertainty, operational risks) to generate outcomes at two levels: resilience capabilities (visibility, monitoring, collaboration, flexibility, anticipation) and performance indicators (recovery rates, cost reduction, CO₂ emissions mitigation, occupational safety). Key findings from the CMO analysis reveal that blockchain-enabled traceability increases material recovery rates by 15–25%, DT simulation reduces deconstruction costs by 20–30%, and computer vision automation improves sorting accuracy to 85–95%. The study contributes middle-range theories explaining how digital technologies enable circular transitions under specific contextual conditions, offering actionable strategic implications for researchers, project managers, technology developers, and policymakers committed to advancing computational economics in sustainable construction. Full article

Indoor air quality (IAQ) in educational buildings plays a critical role in the health, cognitive performance, and well-being of occupants. Aging university facilities often rely on outdated ventilation systems that are not designed to meet current demands or respond to dynamic occupancy levels. This study investigates the performance and feasibility of various advanced ventilation strategies in comparison to an existing balanced mechanical ventilation (BMV) system in a university classroom accommodating 100 students. Using a Dynamic Building Energy Simulation Program, simulations were conducted to evaluate IAQ (using CO₂ levels), energy consumption, and thermal comfort under three retrofitting scenarios: BMV, demand-controlled ventilation (DCV), and hybrid ventilation combining natural and mechanical airflow. The simulations indicate that DCV cuts annual HVAC energy use by 33% relative to the baseline, while the hybrid strategy achieves the greatest reduction of 42% and maintains CO₂ levels and thermal comfort within recommended limits. Although hybrid systems provide seasonal advantages, their complexity may limit applicability. In addition to technical analysis, this study also explores the financial and tax-related challenges associated with retrofitting ventilation systems in university buildings. Investment payback periods, operational costs, and potential tax incentives are discussed to evaluate economic viability. Overall, the endorse hybrid ventilation as the most cost-effective strategy where mixed-mode control is feasible, and DCV as a practical alternative for buildings unable to employ natural ventilation. Full article

This study developed a calibrated, data-supported energy simulation model for the Arrivals Terminal of Cluj-Napoca International Airport (Romania), addressing challenges in modelling complex building typologies. The objective is to improve the accuracy of predicting energy savings and CO₂ emission reductions, supporting renovation and decarbonization strategies aligned with the 2050 targets. The hourly multizone simulations over one year integrated measured operational data, building documentation, and two types of climate datasets (AMY and TMY). The calibration methodology introduces a “Miscellaneous equipment” variable, representing unmonitored indoor electricity consumption, which is incorporated as an internal heat gain in the thermal balance. Validation against real energy measurements showed high agreement (AMY-based RMSE: 3.13 kWh/m²·yr for thermal energy and 1.57 kWh/m²·yr for electricity; relative errors: 2.3% and 0.5%, respectively). The results demonstrate that calibrated modelling reduces the performance gap and provides a robust alternative to standard design-condition energy assessments, which are inadequate for airport terminals but mandatory for several countries, including Romania. The developed model enhances predictive reliability and can guide energy efficiency measures and investment decisions for similar complex buildings. Full article

The UK faces an urgent challenge to simultaneously accelerate housing delivery and reduce whole-life carbon emissions, yet robust empirical evidence on the carbon performance of modular steel housing remains limited. This study aims to quantify the carbon impacts of a modular light-gauge steel frame social housing dwelling in the UK and to benchmark its performance against contemporary low-carbon construction typologies. A cradle-to-grave life cycle assessment was conducted using primary project data from a real modular housing development, with embodied carbon modelled in One Click LCA and operational energy assessed through SAP 10.2-verified datasets. The results indicate a total whole-life carbon footprint of 91.3 tCO₂e over a 50-year period, with embodied emissions (A1–A3) accounting for 38.2% and operational energy and water use contributing 48.1%. The normalised embodied carbon intensity of 366 kgCO₂e/m² (A1–A5) is comparable to recent high-performing cross-laminated timber buildings, demonstrating that optimised modular steel systems can allow for low-carbon outcomes typically associated with bio-based construction. Sensitivity analysis shows that low-carbon foundation concrete, bio-based insulation, and steel optimisation can reduce upfront emissions by approximately 8–10%. Dynamic energy simulations were also used to assess how different design choices influence operational carbon emissions. This study provides transparent, real-project evidence of the whole-life carbon performance of UK modular light-gauge steel frame housing and identifies practical design strategies for further decarbonisation. The findings support informed decision-making for policymakers, designers, and housing providers seeking scalable, low-carbon residential solutions. Full article

In this work, a bio-based thermal insulation composite is developed and processed with epoxidized cottonseed oil (ECSO) as a renewable binder; performance is then assessed at material and building levels by using a natural fiber. Composite insulators were synthesized by mixing clay, fly ash, perlite, and eggshell powder with ECSO at different concentrations (45–55 wt%) and curing temperatures (165–205 °C). The density, thermal conductivity, compressive and tensile strengths, wear resistance, and water absorption capacity of the obtained composites were investigated in detail in extensive experimental work. The density and thermal conductivity were much dependent on the ECSO content and the curing temperature, unbeknownst to us; they significantly decreased with the increasing ECSO content and curing temperature, due to better binder–filler interaction and increased porosity. Among all the tested samples, the lowest thermal conductivity and density were observed for ECSO36, which suggested the best insulation performance. To validate its real-world usability, the best composite (ECSO36) was also tested by an IES-VE building energy simulation under the climate of Ankara in terms of annual energy consumption and CO₂ emission. The results signify that ECSO36 achieves a similar energy consumption and CO₂ emission performance to traditional insulation materials. In summary, the results of this work illustrate that ECSO-based composites have excellent potential to be a green and low-carbon alternative for sustainable building insulation applications. Full article

Traditional passive hydraulic dampers face the challenges of extended design cycles, inefficient parameter matching, and fixed performance, limiting their adaptability. This paper proposes an integrated solution that combines inverse parametric design with active, continuously adjustable damping. First, a high-fidelity nonlinear model is developed based on valve plate elasticity and multi-valve coupling dynamics, achieving a simulation error of ≤4%. An improved genetic algorithm is then designed to inversely optimize five key parameters. This optimization reduces the deviation between the prototype’s damping force–velocity characteristics and the target curve to ≤3% and shortens the design cycle by approximately 40%. Building on this foundation, a pilot-operated electro-hydraulic proportional relief valve is integrated to enable continuous damping adjustment. Co-simulation using AMESim2404 and MatlabSimulinkR2022 reveals the influence of solenoid valve parameters on damping characteristics and calibrates the current–damping force mapping. A co-simulation of a skyhook-controlled quarter-vehicle model demonstrates that the semi-active suspension system reduces the root mean square (RMS) of vertical body acceleration by 21.7%, indicating a significant theoretical improvement in ride comfort. This study establishes a complete technical pathway of “modeling → inverse optimization → integration → verification,” providing an efficient and viable core component solution for intelligent suspension systems. Full article

Accelerating decarbonization in hot-climate buildings requires integrated retrofit strategies that address energy performance, environmental impact, thermal comfort, and economic feasibility within a unified decision framework. This study develops and validates a simulation-driven multi-criteria approach to evaluate retrofit packages across three representative ASHRAE hot sub-climates (1B, 2B, 2A). An academic building was modeled using DesignBuilder (Stroud, UK) and validated in accordance with ASHRAE Guidelines. The retrofit analysis integrates envelope enhancements (insulation and reflective coatings), glazing-integrated photovoltaics (GIPV), rooftop photovoltaics (RTPV), and a Dedicated Outdoor Air System (DOAS). The performance evaluation incorporates dynamically simulated energy consumption, operational CO₂ emissions, thermal comfort indicators (PMV and DCH), and techno-economic metrics (IRR, ROI, PBP). Weighting factors were derived from a structured stakeholder consultation to reflect context-sensitive sustainability priorities. The results indicate energy reductions of approximately 51–57% and carbon emission reductions of 40–53% across the examined zones, while discomfort hours decreased by roughly 42–46%. This demonstrates significant improvements in thermal comfort under integrated retrofit strategies, particularly with DOAS integration, highlighting the importance of ventilation-driven comfort enhancement. Economic feasibility was climate-dependent; envelope-focused solutions yielded high returns, while integrated strategies delivered balanced environmental and economic performance. The proposed framework enables systematic, climate-specific prioritization of retrofit alternatives and supports scalable, economically viable NZEB transitions in rapidly expanding hot-climate educational infrastructure. Full article